FDRY-POE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] DisplayString FROM SNMPv2-TC -- [RFC2579] InterfaceIndex FROM IF-MIB snAgentSys FROM FOUNDRY-SN-ROOT-MIB ; snAgentPoe MODULE-IDENTITY LAST-UPDATED "201708070000Z" -- Aug 7, 2017 ORGANIZATION "Ruckus Wireless, Inc.." CONTACT-INFO "Technical Support Center, Ruckus Wireless, Inc, 350 West Java Drive, Sunnyvale, CA 94089, USA Support URL: https://support.ruckuswireless.com Phone: +1-855-782-5871" DESCRIPTION "The Ruckus Wireless proprietary MIB module for Power Over Ethernet(PoE) It has PoE port and module configuring information. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. " REVISION "200909300000Z" -- September 30, 2009 DESCRIPTION "Changed INTEGER to Integer32" REVISION "200904030000Z" -- 3 April 2009 DESCRIPTION "Initial version, snAgentPoePortTable which was in SNMPv1 written in SNMPv2-SMI." REVISION "201708070000Z" -- Aug 7, 2017 DESCRIPTION "Modified contact Info, Organization and Decscription" ::= { snAgentSys 14 } -- Power Over Ethernet MIB Group snAgentPoeGbl OBJECT IDENTIFIER ::= { snAgentPoe 1 } snAgentPoePort OBJECT IDENTIFIER ::= { snAgentPoe 2 } snAgentPoeModule OBJECT IDENTIFIER ::= { snAgentPoe 3 } snAgentPoeUnit OBJECT IDENTIFIER ::= { snAgentPoe 4 } -- Power Over Ethernet Global Objects snAgentPoeGblPowerCapacityTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the total inline power capacity available in the device, measured in mWatts. " ::= { snAgentPoeGbl 1 } snAgentPoeGblPowerCapacityFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the inline power capacity currently available in the device which is unallocated, measured in mWatts." ::= { snAgentPoeGbl 2 } snAgentPoeGblPowerAllocationsRequestsHonored OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows number of times the inline power allocations requests honored." ::= { snAgentPoeGbl 3} -- Power Over Ethernet Port Table snAgentPoePortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of POE port information." ::= { snAgentPoePort 2 } snAgentPoePortEntry OBJECT-TYPE SYNTAX SnAgentPoePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the POE port table." INDEX { snAgentPoePortNumber } ::= { snAgentPoePortTable 1 } SnAgentPoePortEntry ::= SEQUENCE { snAgentPoePortNumber InterfaceIndex, snAgentPoePortControl INTEGER, snAgentPoePortWattage Integer32, snAgentPoePortClass Integer32, snAgentPoePortPriority INTEGER, snAgentPoePortConsumed Integer32, snAgentPoePortType DisplayString, snAgentPoePortPDClass Integer32, snAgentPoePortPDClassB Integer32, snAgentPoePortlldpReqPwr Integer32, snAgentPoePortlldpReqPwrA Integer32, snAgentPoePortlldpReqPwrB Integer32, snAgentPoePortCapability INTEGER, snAgentPoePortMax2PairPwr Integer32, snAgentPoePortMax4PairPwr Integer32, snAgentPoePortMode INTEGER } snAgentPoePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The port number in ifIndex value." ::= { snAgentPoePortEntry 1 } snAgentPoePortControl OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3), enableLegacyDevice(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'." ::= { snAgentPoePortEntry 2 } snAgentPoePortWattage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Adjust the inline power wattage. Valid value between 1000 to 15400(IEEE802_3AF)/30000(IEEE802_3AT)/120000(IEEE802_3BT). Each unit is milliwatts. This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value." ::= { snAgentPoePortEntry 3 } snAgentPoePortClass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability or is not configured by the user, reading this object returns undefined value (0)." ::= { snAgentPoePortEntry 4 } snAgentPoePortPriority OBJECT-TYPE SYNTAX INTEGER { invalid(0), critical(1), high(2), low(3), medium(4), other(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other." ::= { snAgentPoePortEntry 5 } snAgentPoePortConsumed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inline power consumed by the port. Each unit is milliwatts." ::= { snAgentPoePortEntry 6 } snAgentPoePortType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inline Power device type 802.3af, 802.3at, 802.3bt or Legacy device." ::= { snAgentPoePortEntry 7 } snAgentPoePortPDClass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a PD signature which the decive learns in the process of PD-classification. PD detection and PD-classification are two steps of powering PD. And if PD is powered without user power Spec, then PoE port power limit will be set based on pd-detected class. The value is PDClassA in case of dual signature (IEEE 802.3bt module) PD." ::= { snAgentPoePortEntry 8 } snAgentPoePortPDClassB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is second PD class signature of dual signature PD which the device learns in the process of PD-classification. PD detection and PD-classification are two steps of powering PD. And if PD is powered without user power Spec, then PoE port power limit will be set based on both pd-detected classes. The value PDClassB is valid for dual signature PD (IEEE 802.3bt module) having PDClassA and PDClassB. If the PD is not dual signature the value is 0." ::= { snAgentPoePortEntry 9 } snAgentPoePortlldpReqPwr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum power requested by PD through LLDP in milliwatts." ::= { snAgentPoePortEntry 10 } snAgentPoePortlldpReqPwrA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel snAgentPoePortlldpReqPwrA is power in milliwatts for channel A. This is deprecated as the required information is part of snAgentPoePortlldpReqPwr mib." ::= { snAgentPoePortEntry 11 } snAgentPoePortlldpReqPwrB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel snAgentPoePortlldpReqPwrB is power in milliwatts for channel B. This is deprecated as the required information is part of snAgentPoePortlldpReqPwr mib." ::= { snAgentPoePortEntry 12 } snAgentPoePortCapability OBJECT-TYPE SYNTAX INTEGER { others(0), twoPairPse(1), fourPairPse(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Capability of port, 0-others, 1-2pair, 2-4pair." ::= { snAgentPoePortEntry 13 } snAgentPoePortMax2PairPwr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum power supported by 2pair port in milliwatts." ::= { snAgentPoePortEntry 14 } snAgentPoePortMax4PairPwr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum power supported by 4pair port in milliwatts." ::= { snAgentPoePortEntry 15 } snAgentPoePortMode OBJECT-TYPE SYNTAX INTEGER { none(0), overdrive(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Poe port overdrive mode." ::= { snAgentPoePortEntry 16 } -- Power Over Module Table snAgentPoeModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoeModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of POE Module configuration." ::= { snAgentPoeModule 1 } snAgentPoeModuleEntry OBJECT-TYPE SYNTAX SnAgentPoeModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the POE Module table." INDEX { snAgentPoeModuleNumber } ::= { snAgentPoeModuleTable 1 } SnAgentPoeModuleEntry ::= SEQUENCE { snAgentPoeModuleNumber Unsigned32, snAgentPoeModuleBudget Unsigned32, snAgentPoeModuleMaxPDTypeSupport INTEGER } snAgentPoeModuleNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This objects talks about POE module number." ::= { snAgentPoeModuleEntry 1 } snAgentPoeModuleBudget OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This objects talks about module power budget in watts." ::= { snAgentPoeModuleEntry 2 } snAgentPoeModuleMaxPDTypeSupport OBJECT-TYPE SYNTAX INTEGER { ieee802dot3af(0), ieee802dot3at(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object talks about the POE module type which is capable to support Power Device (PD) type ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also support ieee802.3af but reverse is not true." ::= { snAgentPoeModuleEntry 3 } -- Power Over Unit Table (stacking system) snAgentPoeUnitTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoeUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of POE informaion for each unit. Only the unit that has POE capability appears in a table row" ::= { snAgentPoeUnit 1 } snAgentPoeUnitEntry OBJECT-TYPE SYNTAX SnAgentPoeUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the POE Unit table." INDEX { snAgentPoeUnitIndex } ::= { snAgentPoeUnitTable 1 } SnAgentPoeUnitEntry ::= SEQUENCE { snAgentPoeUnitIndex Unsigned32, snAgentPoeUnitPowerCapacityTotal Unsigned32, snAgentPoeUnitPowerCapacityFree Unsigned32, snAgentPoeUnitPowerAllocationsRequestsHonored Unsigned32, snAgentPoePwrAllocationType INTEGER } snAgentPoeUnitIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Index to POE unit Table." ::= { snAgentPoeUnitEntry 1 } snAgentPoeUnitPowerCapacityTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the total inline power capacity available on that unit (device), measured in mWatts. " ::= { snAgentPoeUnitEntry 2 } snAgentPoeUnitPowerCapacityFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts. In case of Static allocation total free power and in case of Dynamic allocation total unconsumed power is disaplyed" ::= { snAgentPoeUnitEntry 3} snAgentPoeUnitPowerAllocationsRequestsHonored OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows number of times the inline power allocations requests honored on that unit (device)." ::= { snAgentPoeUnitEntry 4} snAgentPoePwrAllocationType OBJECT-TYPE SYNTAX INTEGER { none(0), static(1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the power allocation type, based on which the total free capacity is displayed. Static(1) or Dynamic(2) power allocation." ::= { snAgentPoeUnitEntry 5} END