-- -- Title: Fibre Channel Switch MIB. -- FA-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC Integer32, OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY FROM SNMPv2-SMI sw FROM SW-MIB connUnitPortEntry FROM FCMGMT-MIB; faExt MODULE-IDENTITY LAST-UPDATED "201310291354Z" -- Oct 29, 2013 01:54pm ORGANIZATION "Brocade Communications Systems, Inc.," CONTACT-INFO "Customer Support Group Brocade Communications Systems, 1745 Technology Drive, San Jose, CA 95110 U.S.A Tel: +1-408-392-6061 Fax: +1-408-392-6656 Email: support@Brocade.COM WEB: www.brocade.com" DESCRIPTION "The MIB module is Extension for FA-MIB. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved." REVISION "201011221030Z" -- Nov 22, 2010 10:30am DESCRIPTION "Initial version of this module." REVISION "201309121030Z" -- Sep 12, 2013 10:00am DESCRIPTION "Added swConnUnitPortFECMode" REVISION "201309241355Z" -- Sep 24, 2013 01:55pm DESCRIPTION "Added swConnUnitPortFECState" REVISION "201310291354Z" -- Oct 29, 2013 01:54pm DESCRIPTION "Added notsupported value for swConnUnitPortFECState" ::= { sw 28 } swSfpStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SwSfpStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the diagnostic stats of SFPs." ::= { faExt 1 } swFapwwnFeature OBJECT-IDENTITY STATUS current DESCRIPTION "The OID sub-tree for Fapwwn feature. Using this feature user can configure virtual port WWN for a port." ::= { faExt 2 } swPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SwPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the configuration of encryption / compression feature on a port" ::= { faExt 3 } swConnUnitPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwConnUnitPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the Conn unit Port entry" ::= { faExt 4 } swSfpStatEntry OBJECT-TYPE SYNTAX SwSfpStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the diagnostic stats of SFPs" AUGMENTS {connUnitPortEntry} ::= { swSfpStatTable 1 } SwSfpStatEntry ::= SEQUENCE { swSfpTemperature OCTET STRING, swSfpVoltage OCTET STRING, swSfpCurrent OCTET STRING, swSfpRxPower OCTET STRING, swSfpTxPower OCTET STRING, swSfpPoweronHrs Integer32, swSfpUnitId Integer32 } swSfpTemperature OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) UNITS "centigrade" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the temperature of SFP" ::= { swSfpStatEntry 1 } swSfpVoltage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) UNITS "milli voltage" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the voltage of SFP." ::= { swSfpStatEntry 2 } swSfpCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) UNITS "milli amphere" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current of SFP." ::= { swSfpStatEntry 3 } swSfpRxPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Rx power consumption of SFP." ::= { swSfpStatEntry 4 } swSfpTxPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Tx power consumption of SFP." ::= { swSfpStatEntry 5 } swSfpPoweronHrs OBJECT-TYPE SYNTAX Integer32 UNITS "hours" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the power on hours of SFP. This is applicable only to 16G SFPs." ::= { swSfpStatEntry 6 } swSfpUnitId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies unit ID of SFP. This is applicable only to QSFP." ::= { swSfpStatEntry 7 } swPortFapwwnConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SwPortFapwwnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the configuration of ports." ::= { swFapwwnFeature 1 } swPortFapwwnConfigEntry OBJECT-TYPE SYNTAX SwPortFapwwnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the configuration of ports." AUGMENTS {connUnitPortEntry} ::= { swPortFapwwnConfigTable 1 } FapwwnType ::= INTEGER { unknown(1), auto(2), userConfigured(3) } SwPortFapwwnConfigEntry ::= SEQUENCE { swPortFapwwnConfigEnable TruthValue, swPortFapwwnConfigFapwwn DisplayString, swPortFapwwnConfigType FapwwnType } swPortFapwwnConfigEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the Fapwwn status. This is for per port." ::= { swPortFapwwnConfigEntry 1 } swPortFapwwnConfigFapwwn OBJECT-TYPE SYNTAX DisplayString(SIZE(256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the Fapwwn. For AG it is range of WWNs. If Fapwwn feature is not enabled in a port this object value is NA(Not Applicable." ::= { swPortFapwwnConfigEntry 2 } swPortFapwwnConfigType OBJECT-TYPE SYNTAX FapwwnType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the Fapwwn type. " ::= { swPortFapwwnConfigEntry 3 } swPortConfigEntry OBJECT-TYPE SYNTAX SwPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the configuration of encryption / compression feature on a port" AUGMENTS {connUnitPortEntry} ::= { swPortConfigTable 1 } CiperMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents cipher mode." SYNTAX INTEGER { none (1), allFrames (2), fcpAndNonFCP (3),--FCP data frames and non --FCP frames except ELS (R_CTL=0x2) --and BLS frames (R_CTL=0x8) onlyFCP (4) } EncryptCompressStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents status of feature encryption or compression." SYNTAX INTEGER { enabled (1), disabled (2), unknown (3) } SwPortConfigEntry ::= SEQUENCE { swPortEncrypt EncryptCompressStatus, swPortCompression EncryptCompressStatus, swPortCipherKeySize Integer32, swPortCipherMode CiperMode } swPortEncrypt OBJECT-TYPE SYNTAX EncryptCompressStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the encryption status on a port." ::= { swPortConfigEntry 1 } swPortCompression OBJECT-TYPE SYNTAX EncryptCompressStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the compression status on port." ::= { swPortConfigEntry 2 } swPortCipherKeySize OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the Cipher key size. FOS supports 256 bytes key" ::= { swPortConfigEntry 3 } swPortCipherMode OBJECT-TYPE SYNTAX CiperMode MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the Cipher mode. " ::= { swPortConfigEntry 4 } swConnUnitPortEntry OBJECT-TYPE SYNTAX SwConnUnitPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the Conn unit Port Entry" AUGMENTS {connUnitPortEntry} ::= { swConnUnitPortTable 1 } SwConnUnitPortEntry ::= SEQUENCE { swConnUnitPortCapableSpeeds OCTET STRING, swConnUnitPortSpeedMode INTEGER, swConnUnitPortFECMode INTEGER, swConnUnitPortFECState INTEGER } swConnUnitPortCapableSpeeds OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the available speeds, that a port is capable of configuring" ::= { swConnUnitPortEntry 1 } swConnUnitPortSpeedMode OBJECT-TYPE SYNTAX INTEGER { auto-neg (1), static (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the type of speed modes that can be configured for the particular port. The modes that can be configured are auto-negotiable and static speeds." ::= { swConnUnitPortEntry 2 } swConnUnitPortFECMode OBJECT-TYPE SYNTAX INTEGER { unknown (1), disabled (2), enabled (3), notsupported (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the port Forward Error Correction Mode. FEC feature is only applicable to 10G/16G platforms." ::= { swConnUnitPortEntry 3 } swConnUnitPortFECState OBJECT-TYPE SYNTAX INTEGER { unknown (0), active (1), inactive (2), notsupported (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This represents FEC state of a port.If in link both sfp connected are of brocade vendor type then state is active, else it will be inactive." ::= { swConnUnitPortEntry 4 } END