BROCADE-NP-TM-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64, Counter32 FROM SNMPv2-SMI -- [RFC2578] InterfaceIndex FROM IF-MIB -- [RFC2863] InetAddress, InetAddressType, InetAddressPrefixLength FROM INET-ADDRESS-MIB -- [RFC4001] DisplayString FROM SNMPv2-TC -- [RFC2579] platform FROM FOUNDRY-SN-ROOT-MIB PortPriorityTC FROM FOUNDRY-SN-SWITCH-GROUP-MIB; brocadeNPTMStatsMIB MODULE-IDENTITY LAST-UPDATED "201304250000Z" -- 25 April 2013 ORGANIZATION "Brocade Communications Systems, Inc." CONTACT-INFO "Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com" DESCRIPTION "The MIB module to describe Network Processor (NP) and Traffic Manager(TM) related statistics information. Supported Platforms: - supported on NI XMR/MLX platforms. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." REVISION "201304250000Z" -- 25 April 2013 DESCRIPTION "Added table brcdNPCSRAMErrorTable, brcdNPLPMRAMErrorTable, notification brcdNPCSRAMErrorThresholdExceeded, and notification brcdNPLPMRAMErrorThresholdExceeded for CER/CES Data Integrity Protection Phase-2" REVISION "201302220000Z" -- Feb 22, 2013 DESCRIPTION "Added the following new NP error traps: brcdNPMemoryParityErrorTrap brcdNPMemoryMiscErrorTrap brcdNPBuffOverFlowErrorTrap brcdNPBuffUnderFlowErrorTrap brcdNPECCSingleErrorTrap brcdNPECCMultipleErrorTrap" REVISION "201302110000Z" -- Feb 11, 2013 DESCRIPTION "Added a new table brcdNPDebugStatTable " REVISION "201207040000Z" -- July 4, 2012 DESCRIPTION "Changes in this revision: - Added a new table brcdTMCpuAggrQStatsTable " REVISION "201205180000Z" -- 18 May 2012 DESCRIPTION "Added brcdNPIndex and brcdNPLockupRecoveryCount." REVISION "201204250000Z" -- 25 April 2012 DESCRIPTION "Added table brcdNPBufferErrorTable, notification snTrapNPIngressBufferErrorThresholdExceeded, and notification snTrapNPEgressBufferErrorThresholdExceeded for CER/CES Data Integrity Protection." REVISION "201111180000Z" -- November 18, 2011 DESCRIPTION "Changes in this revision: - Updated below mib table descriptions with LAG interface support: brcdNPQosStatTable brcdTMDestUcastQStatTable " REVISION "201109280000Z" -- September 28, 2011 DESCRIPTION "Changes in this revision: - Added below new tables brcdNPQosStatTable brcdTMDestUcastQStatTable " REVISION "201009020000Z" -- September 02, 2010 DESCRIPTION "Initial revision" ::= { platform 2 } -- -- high level object identifiers -- brcdNPTMMIBNotification OBJECT IDENTIFIER ::= { brocadeNPTMStatsMIB 0 } brcdNPTMMIBObjects OBJECT IDENTIFIER ::= { brocadeNPTMStatsMIB 1 } brcdNPStatisticsInfo OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 1 } brcdTMStatisticsInfo OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 2 } brcdNPGlobal OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 3 } -- the brcdNPStatsTable table -- The brcdNPStatsTable table contains information of NP related -- statistics on NI XMR/MLX platform. brcdNPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdNPStats entries. This table contains information of various Network Processor(NP) counters supported by this system." ::= { brcdNPStatisticsInfo 1 } brcdNPStatsEntry OBJECT-TYPE SYNTAX BrcdNPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing NP counter information applicable for a particular interface if the module is physically present." INDEX { brcdNPStatsIfIndex } ::= { brcdNPStatsTable 1 } BrcdNPStatsEntry ::= SEQUENCE { brcdNPStatsIfIndex InterfaceIndex, brcdNPStatsRxRawGoodPkts Counter64, brcdNPStatsRxForwardPkts Counter64, brcdNPStatsRxDiscardPkts Counter64, brcdNPStatsRxMiscPkts Counter64, brcdNPStatsRxUnicastPkts Counter64, brcdNPStatsRxBroadcastPkts Counter64, brcdNPStatsRxMulticastPkts Counter64, brcdNPStatsRxSendToTMPkts Counter64, brcdNPStatsRxBadPkts Counter64, brcdNPStatsRxLookupUnavailable Counter64, brcdNPStatsRxACLDrop Counter64, brcdNPStatsRxPriority0And1Drop Counter64, brcdNPStatsRxPriority2And3Drop Counter64, brcdNPStatsRxPriority4And5Drop Counter64, brcdNPStatsRxPriority6And7Drop Counter64, brcdNPStatsRxSuppressRPFDrop Counter64, brcdNPStatsRxRPFDrop Counter64, brcdNPStatsRxIPv4Pkts Counter64, brcdNPStatsRxIPv6Pkts Counter64, brcdNPStatsRxRouteOnlyDrop Counter64, brcdNPStatsRxIPv6SuppressRPFDrop Counter64, brcdNPStatsRxIPv6RPFDropCount Counter64, brcdNPStatsRxIPv4Bytes Counter64, brcdNPStatsRxIPv6Bytes Counter64, brcdNPStatsRxPOSCtrlProtocolPkts Counter64, brcdNPStatsRxPOSLinkDrop Counter64, brcdNPStatsRxRoutedPktsDrop Counter64, brcdNPStatsTxSentToMACPkts Counter64, brcdNPStatsTxRawGoodPkts Counter64, brcdNPStatsTxSrcPortSupressDrop Counter64, brcdNPStatsTxBadPktsCnt Counter64, brcdNPStatsTxUnicastPkts Counter64, brcdNPStatsTxBroadcastPkts Counter64, brcdNPStatsTxMulticastPkts Counter64, brcdNPStatsTxReceiveFromTM Counter64, brcdNPStatsTxACLDrop Counter64, brcdNPStatsTxPFCMulticastDrop Counter64, brcdNPStatsTxPFCMTUExceedDrop Counter64, brcdNPStatsTxPFCQMAPErrorDrop Counter64, brcdNPStatsTxIPv4Pkts Counter64, brcdNPStatsTxIPv6Pkts Counter64, brcdNPStatsTxIPv4Bytes Counter64, brcdNPStatsTxIPv6Bytes Counter64, brcdNPStatsTxPOSCtrlProtocolPkts Counter64, brcdNPStatsTxPOSLinkDrop Counter64 } brcdNPStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index as equivalent to ifIndex in MIB II. This is applicable only for the interfaces that are physically present and operationally up. " ::= { brcdNPStatsEntry 1 } brcdNPStatsRxRawGoodPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for good packets received from MAC. In equation, Rx Raw Good Packets = Rx Unicast Packets + Rx Multicast Packets + Rx Broadcast Packets = Rx IPv4 Packets + Rx IPv6 Packets + Rx Other Packets = Rx Forward Packets + Rx Discard Packets" ::= { brcdNPStatsEntry 2 } brcdNPStatsRxForwardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter for forwarded packets by packet evaluation engine in the Ingress. In equation, Rx Forward Packets = Rx Sent to TM Packets + Rx RL drop packets ." ::= { brcdNPStatsEntry 3 } brcdNPStatsRxDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets flagged for discard by packet evaluation engine. In equation, Rx Discard Packets = ACL drop + TTL drop + route-only drop + RPF drop + tag mismatch drop + VLAN blocking drop + segment filtering drop + drop by packet evaluation decisions + miscellaneous." ::= { brcdNPStatsEntry 4 } brcdNPStatsRxMiscPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for Miscellaneous Packets Received." ::= { brcdNPStatsEntry 5 } brcdNPStatsRxUnicastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for unicast packets received." ::= { brcdNPStatsEntry 6 } brcdNPStatsRxBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for broadcast packets received" ::= { brcdNPStatsEntry 7 } brcdNPStatsRxMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for multicast packets received." ::= { brcdNPStatsEntry 8 } brcdNPStatsRxSendToTMPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets sent to TM. This value should be equal to difference of Rx forward packets and RL drops." ::= { brcdNPStatsEntry 9 } brcdNPStatsRxBadPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for bad packets in the receiver side. They represent the packets that have MAC to NP interface errors." ::= { brcdNPStatsEntry 10 } brcdNPStatsRxLookupUnavailable OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped due to unavailability of the CAM interface for packet lookups." ::= { brcdNPStatsEntry 11 } brcdNPStatsRxACLDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Drop counter for ACL drop on the ingress path." ::= { brcdNPStatsEntry 12 } brcdNPStatsRxPriority0And1Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 0,1 in the Ingress." ::= { brcdNPStatsEntry 13 } brcdNPStatsRxPriority2And3Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 2,3 in the Ingress." ::= { brcdNPStatsEntry 14 } brcdNPStatsRxPriority4And5Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 4,5 in the Ingress." ::= { brcdNPStatsEntry 15 } brcdNPStatsRxPriority6And7Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 6,7 in the Ingress." ::= { brcdNPStatsEntry 16 } brcdNPStatsRxSuppressRPFDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for suppressed RPF drops on the ingress path due to ACL override." ::= { brcdNPStatsEntry 17 } brcdNPStatsRxRPFDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for RPF drop in the ingress." ::= { brcdNPStatsEntry 18 } brcdNPStatsRxIPv4Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet count that have IPv4 Etype (0x0800) and IP version of 0x4." ::= { brcdNPStatsEntry 19 } brcdNPStatsRxIPv6Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet count that have IPv6 Etype (0x86DD) and IP version of 0x6." ::= { brcdNPStatsEntry 20 } brcdNPStatsRxRouteOnlyDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts packets that have been dropped due to Route-Only configuration during MAC-DA processing. " ::= { brcdNPStatsEntry 21 } brcdNPStatsRxIPv6SuppressRPFDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for IPv6 suppressed RFP drops on the ingress path due to ACL override." ::= { brcdNPStatsEntry 22 } brcdNPStatsRxIPv6RPFDropCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for IPv6 drop on the ingress." ::= { brcdNPStatsEntry 23 } brcdNPStatsRxIPv4Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet Bytes (+FCS) that have IPv4 Etype (0x0800) and IP version equals 0x4. " ::= { brcdNPStatsEntry 24 } brcdNPStatsRxIPv6Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet Bytes (+FCS) that have IPv6 Etype (0x86DD) and IP version equals 0x6. " ::= { brcdNPStatsEntry 25 } brcdNPStatsRxPOSCtrlProtocolPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of control protocol packets received in POS mode. The object is supported only on POS interfaces. 0 is returned for others." ::= { brcdNPStatsEntry 26 } brcdNPStatsRxPOSLinkDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped due to link state in POS mode. The object is supported only on POS interfaces. 0 is returned for others. " ::= { brcdNPStatsEntry 27 } brcdNPStatsRxRoutedPktsDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received IPv4 or IPv6 routed packets that are dropped because the TTL is 0, or because routing is not enabled on the given virtual interface. " ::= { brcdNPStatsEntry 28 } brcdNPStatsTxSentToMACPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets sent to MAC for transmit.In equation, Tx Sent to MAC = Tx IPv4 Packets + Tx IPv6 Packets + Tx Others = Tx Raw Good Packets - Tx Source Port Suppression Drop - Tx ACL drop - Tx RL Drop - Tx Multicast TTL drop." ::= { brcdNPStatsEntry 29 } brcdNPStatsTxRawGoodPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets sent to egress processing logic that pass the initial length checks (min, max, offsets, bad packet etc.)In equation, Tx Raw Good Packets = Tx Receive From TM Packets - Tx Bad Packets = Tx Unicast Packets + Tx Broadcast Packets + Tx Multicast Packets + Tx Source Port Suppression Drop. " ::= { brcdNPStatsEntry 30 } brcdNPStatsTxSrcPortSupressDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped because of transmit source port suppression." ::= { brcdNPStatsEntry 31 } brcdNPStatsTxBadPktsCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets dropped in egress logic that fail the initial length checks (min, max, bad packet etc.)." ::= { brcdNPStatsEntry 32 } brcdNPStatsTxUnicastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for unicast packets transmitted." ::= { brcdNPStatsEntry 33 } brcdNPStatsTxBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for broadcast packets transmitted." ::= { brcdNPStatsEntry 34 } brcdNPStatsTxMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for multicast packets transmitted." ::= { brcdNPStatsEntry 35 } brcdNPStatsTxReceiveFromTM OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets received from TM." ::= { brcdNPStatsEntry 36 } brcdNPStatsTxACLDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped by the outbound ACL logic." ::= { brcdNPStatsEntry 37 } brcdNPStatsTxPFCMulticastDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast FID packets that have been dropped by egress logic that map to the egress queue which is in paused state. Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module'. 0 is returned for the rest of the cards." ::= { brcdNPStatsEntry 38 } brcdNPStatsTxPFCMTUExceedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped by egress logic that exceeds the MTU of the egress queue (they map to). Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module'. 0 is returned for the rest of the cards." ::= { brcdNPStatsEntry 39 } brcdNPStatsTxPFCQMAPErrorDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped by egress logic that does not map to any valid egress queue. This object is Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module'. 0 is returned for the rest of the cards." ::= { brcdNPStatsEntry 40 } brcdNPStatsTxIPv4Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv4 packets transmitted out the port that have Etype 0x0800 and IPver version equals 0x4)" ::= { brcdNPStatsEntry 41 } brcdNPStatsTxIPv6Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv6 packets transmitted out the port that have Etype 0x86DD and IPver version equals 0x6." ::= { brcdNPStatsEntry 42} brcdNPStatsTxIPv4Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts packet Bytes (+FCS) that have IPv4 Etype (0x0800) and IP version equals 0x4" ::= { brcdNPStatsEntry 43} brcdNPStatsTxIPv6Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts packet Bytes (+FCS) that have IPv6 Etype (0x86DD) and IP version equals 0x6" ::= { brcdNPStatsEntry 44} brcdNPStatsTxPOSCtrlProtocolPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of control protocol packets sent in POS mode. The object is supported only for POS interfaces. For others it returns 0." ::= { brcdNPStatsEntry 45 } brcdNPStatsTxPOSLinkDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped due to link state in POS mode. The object is supported only for POS interfaces. For others it returns 0." ::= { brcdNPStatsEntry 46 } -- the brcdNPBufferErrorTable table -- The brcdNPBufferErrorTable table contains information of NP Buffer memory related -- error events on CES/CER platform. brcdNPBufferErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPBufferErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdNPBufferError entries. This table contains information of various Network Processor(NP) error event counters supported by this system. The objects in this table are refreshed every second, based on request. This table is only supported on CES/CER." ::= { brcdNPStatisticsInfo 3 } brcdNPBufferErrorEntry OBJECT-TYPE SYNTAX BrcdNPBufferErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing buffer error event counter information applicable for a set of interfaces managed by a NP." INDEX { brcdNPBufferErrorSlotId, brcdNPBufferErrorDeviceId} ::= { brcdNPBufferErrorTable 1 } BrcdNPBufferErrorEntry ::= SEQUENCE { brcdNPBufferErrorSlotId Unsigned32, brcdNPBufferErrorDeviceId Unsigned32, brcdNPBufferErrorDescription DisplayString, brcdNPBufferErrorIngressCurrentEvents Counter32, brcdNPBufferErrorIngressCumulativeEvents Counter32, brcdNPBufferErrorEgressCurrentEvents Counter32, brcdNPBufferErrorEgressCumulativeEvents Counter32 } brcdNPBufferErrorSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the module, which uniquely identifies it. The module must be physically present and operationally up. This is 1-based index." ::= { brcdNPBufferErrorEntry 1 } brcdNPBufferErrorDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NP device ID, a number which uniquely identifies the network processor within a module in the system. This is 1-based index." ::= { brcdNPBufferErrorEntry 2 } brcdNPBufferErrorDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the NP identified by brcdNPBufferErrorSlotId and brcdNPBufferDeviceId." ::= { brcdNPBufferErrorEntry 3 } brcdNPBufferErrorIngressCurrentEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for NP Ingress buffer error events recorded within a window." ::= { brcdNPBufferErrorEntry 4 } brcdNPBufferErrorIngressCumulativeEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for NP Ingress total buffer error events recorded." ::= { brcdNPBufferErrorEntry 5 } brcdNPBufferErrorEgressCurrentEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for NP Egress buffer error events recorded within a window." ::= { brcdNPBufferErrorEntry 6 } brcdNPBufferErrorEgressCumulativeEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for NP Egress total buffer error events recorded" ::= { brcdNPBufferErrorEntry 7 } -- brcdNPCSRAMErrorTable -- To query for NP CSRAM errors. brcdNPCSRAMErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPCSRAMErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdNPCSRAMError entries. This table contains information of various Network Processor(NP) CSRAM error event counters supported by this system. The objects in this table are refreshed every second, based on request. This table is only supported on CES and CER." ::= { brcdNPStatisticsInfo 4 } brcdNPCSRAMErrorEntry OBJECT-TYPE SYNTAX BrcdNPCSRAMErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing CSRAM error event counter information applicable for a set of interfaces managed by a NP." INDEX { brcdNPCSRAMErrorSlotId, brcdNPCSRAMErrorDeviceId } ::= { brcdNPCSRAMErrorTable 1 } BrcdNPCSRAMErrorEntry ::= SEQUENCE { brcdNPCSRAMErrorSlotId Unsigned32, brcdNPCSRAMErrorDeviceId Unsigned32, brcdNPCSRAMErrorDescription DisplayString, brcdNPCSRAMErrorCurrentEvents Counter32, brcdNPCSRAMErrorCumulativeEvents Counter32 } brcdNPCSRAMErrorSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot-id of the module which uniquely identifies it in the system. The module should be physically present and should be UP. This is a 1-based index." ::= { brcdNPCSRAMErrorEntry 1 } brcdNPCSRAMErrorDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NP device-id, a number which uniquely identifies the network processor within a module in the system. This is a 1-based index." ::= { brcdNPCSRAMErrorEntry 2 } brcdNPCSRAMErrorDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the NP identified by brcdNPCSRAMErrorSlotId and brcdNPCSRAMErrorDeviceId." ::= { brcdNPCSRAMErrorEntry 3 } brcdNPCSRAMErrorCurrentEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for NP CSRAM errors recorded within a configured window." ::= { brcdNPCSRAMErrorEntry 4 } brcdNPCSRAMErrorCumulativeEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for total NP CSRAM errors recorded." ::= { brcdNPCSRAMErrorEntry 5 } -- brcdNPLPMRAMErrorTable -- To query for NP LPM-RAM errors. brcdNPLPMRAMErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPLPMRAMErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdNPLPMRAMError entries. This table contains information of various LPM RAM error event counters supported by the Network processor in this system. The objects in this table are refreshed every second, based on request. This table is only supported on CES and CER." ::= { brcdNPStatisticsInfo 5 } brcdNPLPMRAMErrorEntry OBJECT-TYPE SYNTAX BrcdNPLPMRAMErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing LPMRAM error event counter information applicable for a set of interfaces managed by a NP." INDEX { brcdNPLPMRAMErrorIndex, brcdNPLPMRAMErrorSlotId, brcdNPLPMRAMErrorDeviceId } ::= { brcdNPLPMRAMErrorTable 1 } BrcdNPLPMRAMErrorEntry ::= SEQUENCE { brcdNPLPMRAMErrorIndex Unsigned32, brcdNPLPMRAMErrorSlotId Unsigned32, brcdNPLPMRAMErrorDeviceId Unsigned32, brcdNPLPMRAMErrorName DisplayString, brcdNPLPMRAMErrorDescription DisplayString, brcdNPLPMRAMErrorCurrentEvents Counter32, brcdNPLPMRAMErrorCumulativeEvents Counter32 } brcdNPLPMRAMErrorIndex OBJECT-TYPE SYNTAX Unsigned32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a LPM within a network processor. CER devices use LPM-0, LPM-1 and LPM-2 memories, whereas CES devices use LPM-3 memory only. This is a 1-based index. Therefore, index value of 1 maps to LPM0, 2 maps to LPM1 and so on." ::= { brcdNPLPMRAMErrorEntry 1 } brcdNPLPMRAMErrorSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot-id of the module which uniquely identifies it in the system. The module should be physically present and should be UP. This is a 1-based index." ::= { brcdNPLPMRAMErrorEntry 2 } brcdNPLPMRAMErrorDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NP device-id, a number which uniquely identifies the network processor within a module in the system. This is a 1-based index." ::= { brcdNPLPMRAMErrorEntry 3 } brcdNPLPMRAMErrorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives a string representing the LPM identified by brcdNPLPMRAMErrorIndex." ::= { brcdNPLPMRAMErrorEntry 4 } brcdNPLPMRAMErrorDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the NP identified by brcdNPLPMRAMErrorSlotId and brcdNPLPMRAMErrorDeviceId." ::= { brcdNPLPMRAMErrorEntry 5 } brcdNPLPMRAMErrorCurrentEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the error events recorded within a configured window in the LPM identified by brcdNPLPMRAMErrorIndex, brcdNPLPMRAMErrorSlotId and brcdNPLPMRAMErrorDeviceId." ::= { brcdNPLPMRAMErrorEntry 6 } brcdNPLPMRAMErrorCumulativeEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the error events recorded within a configured window in the LPM identified by brcdNPLPMRAMErrorIndex, brcdNPLPMRAMErrorSlotId and brcdNPLPMRAMErrorDeviceId." ::= { brcdNPLPMRAMErrorEntry 7 } -- The brcdNPQosStatTable table contains information of NP Qos related -- statistics on NI XMR/MLX platform. brcdNPQosStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPQosStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of Qos counters for the specific interface per Qos priority. Please refer to the MIB reference guide for pre-requisites of this table." ::= { brcdNPStatisticsInfo 2 } brcdNPQosStatEntry OBJECT-TYPE SYNTAX BrcdNPQosStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing Qos statistics information applicable for a particular interface. " INDEX { brcdNPQosStatIfIndex, brcdNPQosStatQosPriority } ::= { brcdNPQosStatTable 1 } BrcdNPQosStatEntry ::= SEQUENCE { brcdNPQosStatIfIndex InterfaceIndex, brcdNPQosStatQosPriority PortPriorityTC, brcdNPQosStatIngressPkts Counter64, brcdNPQosStatIngressBytes Counter64, brcdNPQosStatEgressPkts Counter64, brcdNPQosStatEgressBytes Counter64 } brcdNPQosStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ifIndex of the interface. All the interfaces of the LP modules that are physically present and operationally up will be included in this table. Starting from NetIron 5.3 release, all deployed LAG interfaces will also be included in this table." ::= { brcdNPQosStatEntry 1 } brcdNPQosStatQosPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Qos priority associated with this entry. This is 1-based index. The priority0 maps to 1, priority1 maps to 2 etc. Priority value equal to nonPriority(128) is not applicable to this table." ::= { brcdNPQosStatEntry 2 } brcdNPQosStatIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have arrived on the specified interface with a DSCP, EXP or PCP value equal to the value of the brcdNPQosStatQosPriority object." ::= { brcdNPQosStatEntry 3 } brcdNPQosStatIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that have arrived on the specified interface with a DSCP, EXP or PCP value in the packet equal to the value of the brcdNPQosStatQosPriority object." ::= { brcdNPQosStatEntry 4 } brcdNPQosStatEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets leaving the device on the specified interface with an internal priority value equal to the value of the brcdNPQosStatQosPriority object. The internal priority is configuration dependent but generally is a function of DSCP, EXP or PCP." ::= { brcdNPQosStatEntry 5 } brcdNPQosStatEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes leaving the device on the specified interface with an internal priority value equal to the value of the brcdNPQosStatQosPriority object. The internal priority is configuration dependent but generally is a function of DSCP, EXP or PCP." ::= { brcdNPQosStatEntry 6 } -- The brcdNPDebugStatTable -- -- show np debug-stat in CLI -- brcdNPDebugStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPDebugStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the debug statistics of Network Processors in the line cards." ::= { brcdNPStatisticsInfo 6 } brcdNPDebugStatEntry OBJECT-TYPE SYNTAX BrcdNPDebugStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing debug statistics of a Network Processor " INDEX { brcdNPDebugStatSlotId, brcdNPDebugStatNPDeviceId } ::= { brcdNPDebugStatTable 1 } BrcdNPDebugStatEntry ::= SEQUENCE { brcdNPDebugStatSlotId Unsigned32, brcdNPDebugStatNPDeviceId Unsigned32, brcdNPDebugStatDescription DisplayString, brcdNPDebugStatL2SourceAddrLearnDrop Counter64, brcdNPDebugStatRateLimitVPLSLocalLearnDrop Counter64, brcdNPDebugStatUnkownMPLSDrop Counter64, brcdNPDebugStatDestAddrVCMiss Counter64, brcdNPDebugStatRateLimitVPLSRemoteLearnDrop Counter64, brcdNPDebugStatIPv4DestAddrVCMiss Counter64, brcdNPDebugStatIPv6DestAddrVCMiss Counter64, brcdNPDebugStatVPLSTx Counter64, brcdNPDebugStatVLLTx Counter64, brcdNPDebugStatUnknowL3VPNIngressDrop Counter64, brcdNPDebugStatIPv6VPNTx Counter64, brcdNPDebugStatIPv4VPNTx Counter64, brcdNPDebugStatGREIPv4RxCount Counter64, brcdNPDebugStatGREInvalidDrop Counter64, brcdNPDebugStat6to4RxCount Counter64, brcdNPDebugStatGREEnfSourceIngressChkMiss Counter64, brcdNPDebugStat6to4EnfSourceIngressChkMiss Counter64, brcdNPDebugStatGREMPLSRxCount Counter64, brcdNPDebugStatGREIPv6RxCount Counter64, brcdNPDebugStatPBBRxDropCount Counter64, brcdNPDebugStatPBBTxCount Counter64, brcdNPDebugStatIPv4DestAddrVCDrop Counter64, brcdNPDebugStatIPv6DestAddrVCDrop Counter64, brcdNPDebugStatSourceAddrPortVLANMiss Counter64, brcdNPDebugStatVPLSSourceAddrPortVLANMiss Counter64, brcdNPDebugStatSourceAddrVCMiss Counter64, brcdNPDebugStatIPv4HWFwdCount Counter64, brcdNPDebugStatIPv6HWFwdCount Counter64, brcdNPDebugStatMulticastRPFDropCount Counter64, brcdNPDebugStatMPLSLsrTxCount Counter64, brcdNPDebugStatGREIPv4TxCount Counter64, brcdNPDebugStat6to4TxCount Counter64, brcdNPDebugStatMPLSRSVPTxCount Counter64, brcdNPDebugStatGREMPLSTxCount Counter64, brcdNPDebugStatGREIPv6TxCount Counter64 } brcdNPDebugStatSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdNPDebugStatEntry 1 } brcdNPDebugStatNPDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NP device ID, a number which uniquely identifies the network processor within a linecard in the system." ::= { brcdNPDebugStatEntry 2 } brcdNPDebugStatDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdNPDebugStatNPDeviceId." ::= { brcdNPDebugStatEntry 3 } brcdNPDebugStatL2SourceAddrLearnDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all L2 source address learning drop packets." ::= { brcdNPDebugStatEntry 4 } brcdNPDebugStatRateLimitVPLSLocalLearnDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all rate limit VPLS local learning drop packets." ::= { brcdNPDebugStatEntry 5 } brcdNPDebugStatUnkownMPLSDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all unknow MPLS drop packets. It includes packets with Unknow Label to CPU (or) MPLS Label TTL <=1 (or) L2VPN Packet but PRAM type not equal to VLL or VPLS (or) MPLS transit label TTL <=1." ::= { brcdNPDebugStatEntry 6 } brcdNPDebugStatDestAddrVCMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all destination address VC lookup miss packets." ::= { brcdNPDebugStatEntry 7 } brcdNPDebugStatRateLimitVPLSRemoteLearnDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all rate limit VPLS remote learn drop packets." ::= { brcdNPDebugStatEntry 8 } brcdNPDebugStatIPv4DestAddrVCMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all IPv4 destination address VC lookup miss packets." ::= { brcdNPDebugStatEntry 9 } brcdNPDebugStatIPv6DestAddrVCMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all IPv6 destination address VC lookup miss packets." ::= { brcdNPDebugStatEntry 10 } brcdNPDebugStatVPLSTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all VPLS destination address hit Tx processing packets." ::= { brcdNPDebugStatEntry 11 } brcdNPDebugStatVLLTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all VLL destination address hit Tx processing packets." ::= { brcdNPDebugStatEntry 12 } brcdNPDebugStatUnknowL3VPNIngressDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all unknown L3 VPN ingress drop packets. It includes outer IP checksum fail (or) TTL=0 (or) routing not enabled packets." ::= { brcdNPDebugStatEntry 13 } brcdNPDebugStatIPv6VPNTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all IPv6 VPN transmit processing packets." ::= { brcdNPDebugStatEntry 14 } brcdNPDebugStatIPv4VPNTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all IPv4 VPN transmit processing packets." ::= { brcdNPDebugStatEntry 15 } brcdNPDebugStatGREIPv4RxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all GRE encapsulated IPv4 payload packets proceeded for IP DPA processing." ::= { brcdNPDebugStatEntry 16 } brcdNPDebugStatGREInvalidDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets with invalid protocol type in GRE header." ::= { brcdNPDebugStatEntry 17 } brcdNPDebugStat6to4RxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all valid outer IPv4 header and source ingress check hit packets." ::= { brcdNPDebugStatEntry 18 } brcdNPDebugStatGREEnfSourceIngressChkMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all GRE outer IPv4 source ingress check miss packets." ::= { brcdNPDebugStatEntry 19 } brcdNPDebugStat6to4EnfSourceIngressChkMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all outer IPv4 source ingress check miss packets." ::= { brcdNPDebugStatEntry 20 } brcdNPDebugStatGREMPLSRxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all GRE encapsulated MPLS payload packets proceeded for MPLS receive processing." ::= { brcdNPDebugStatEntry 21 } brcdNPDebugStatGREIPv6RxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all GRE encapsulated IPv6 payload packets proceeded for IP DPA processing." ::= { brcdNPDebugStatEntry 22 } brcdNPDebugStatPBBRxDropCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all PBB Rx drop packets.This counter is valid only for 2*100G, 8*10G, 4*40G, 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards." ::= { brcdNPDebugStatEntry 23 } brcdNPDebugStatPBBTxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all PBB Tx packets.This counter is valid only for 2*100G, 8*10G, 4*40G, 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards." ::= { brcdNPDebugStatEntry 24 } brcdNPDebugStatIPv4DestAddrVCDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all IPv4 destination address VC drop packets. This counter is valid only for 2*100G, 8*10G, 4*40G, 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards." ::= { brcdNPDebugStatEntry 25 } brcdNPDebugStatIPv6DestAddrVCDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all IPv6 destination address VC drop packets. This counter is valid only for 2*100G, 8*10G, 4*40G, 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards." ::= { brcdNPDebugStatEntry 26 } brcdNPDebugStatSourceAddrPortVLANMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all source address port VLAN miss packets." ::= { brcdNPDebugStatEntry 27 } brcdNPDebugStatVPLSSourceAddrPortVLANMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all VPLS source address port VLAN miss packets." ::= { brcdNPDebugStatEntry 28 } brcdNPDebugStatSourceAddrVCMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all source address VC miss packets." ::= { brcdNPDebugStatEntry 29 } brcdNPDebugStatIPv4HWFwdCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all valid IPv4 hardware forwarded packets." ::= { brcdNPDebugStatEntry 30 } brcdNPDebugStatIPv6HWFwdCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all valid IPv6 hardware forwarded packets." ::= { brcdNPDebugStatEntry 31 } brcdNPDebugStatMulticastRPFDropCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all multicast RPF failed packets." ::= { brcdNPDebugStatEntry 32 } brcdNPDebugStatMPLSLsrTxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of valid transit LSR cross-connect packets." ::= { brcdNPDebugStatEntry 33 } brcdNPDebugStatGREIPv4TxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of valid IPv4 payload with GRE encapsulation." ::= { brcdNPDebugStatEntry 34 } brcdNPDebugStat6to4TxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all valid 6to4 transmit packets." ::= { brcdNPDebugStatEntry 35 } brcdNPDebugStatMPLSRSVPTxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all valid MPLS RSVP transmit packets." ::= { brcdNPDebugStatEntry 36 } brcdNPDebugStatGREMPLSTxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all valid GRE encapsulated MPLS transmit packets." ::= { brcdNPDebugStatEntry 37 } brcdNPDebugStatGREIPv6TxCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of valid IPv6 payload with IPv4 GRE encapsulation." ::= { brcdNPDebugStatEntry 38 } -- the brcdTMStatsInfoGroup brcdTMStatisticsInfoGroup OBJECT IDENTIFIER ::= { brcdTMStatisticsInfo 1 } brcdTMPortMappingMaxPorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum ports that can be supported by the TM on this system" ::= { brcdTMStatisticsInfoGroup 1 } brcdTMPortMappingUsedPorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The currently used ports on this system" ::= { brcdTMStatisticsInfoGroup 2 } brcdTMPortMappingAvailablePorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The available ports on this system" ::= { brcdTMStatisticsInfoGroup 3 } -- The brcdTMStatsTable table contains information of Traffic Manager(TM) -- related statistics on NI XMR/MLX platform. brcdTMStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdTMStats entries. This table contains information of various Traffic Manager(TM) counters supported by this system." ::= { brcdTMStatisticsInfo 2 } brcdTMStatsEntry OBJECT-TYPE SYNTAX BrcdTMStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMStatsSlotId, brcdTMStatsTMDeviceId } ::= { brcdTMStatsTable 1 } BrcdTMStatsEntry ::= SEQUENCE { brcdTMStatsSlotId Unsigned32, brcdTMStatsTMDeviceId Unsigned32, brcdTMStatsDescription DisplayString, brcdTMStatsTotalIngressPktsCnt Counter64, brcdTMStatsIngressEnqueuePkts Counter64, brcdTMStatsEgressEnqueuePkts Counter64, brcdTMStatsIngressEnqueueBytes Counter64, brcdTMStatsEgressEnqueueBytes Counter64, brcdTMStatsIngressDequeuePkts Counter64, brcdTMStatsIngressDequeueBytes Counter64, brcdTMStatsIngressTotalQDiscardPkts Counter64, brcdTMStatsIngressTotalQDiscardBytes Counter64, brcdTMStatsIngressOldestDiscardPkts Counter64, brcdTMStatsIngressOldestDiscardBytes Counter64, brcdTMStatsEgressDiscardPkts Counter64, brcdTMStatsEgressDiscardBytes Counter64 } brcdTMStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMStatsEntry 1 } brcdTMStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in the system." ::= { brcdTMStatsEntry 2 } brcdTMStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMStatsTMDeviceId." ::= { brcdTMStatsEntry 3 } brcdTMStatsTotalIngressPktsCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering into this traffic manager." ::= { brcdTMStatsEntry 4 } brcdTMStatsIngressEnqueuePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager." ::= { brcdTMStatsEntry 5 } brcdTMStatsEgressEnqueuePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering egress queues and forwarded out on this traffic manager." ::= { brcdTMStatsEntry 6 } brcdTMStatsIngressEnqueueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-10Gx24-DM 24 -port-10GbE Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2- port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 7 } brcdTMStatsEgressEnqueueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering egress queues and forwarded out on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-10Gx24-DM 24-port-10GbE Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX- 100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 8 } brcdTMStatsIngressDequeuePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic manager." ::= { brcdTMStatsEntry 9 } brcdTMStatsIngressDequeueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module' 'BR-MLX-10Gx24-DM 24-port-10GbE Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX- 100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards." ::= { brcdTMStatsEntry 10 } brcdTMStatsIngressTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: (1) the queue reaching its maximum depth, WRED, or other reasons. (2) the network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMStatsEntry 11 } brcdTMStatsIngressTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: (1) the queue reaching its maximum depth, WRED, or other reasons. (2) the network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (X) Module'NI-MLX-10Gx8-D 8-port 10GbE(D) Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module','BR-MLX-10Gx24-DM 24-port-10GbE Module', 'BR-MLX-10Gx24-DM 24-port-10GbE Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX- 100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 12 } brcdTMStatsIngressOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted later due to buffer being full." ::= { brcdTMStatsEntry 13 } brcdTMStatsIngressOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted later due to buffer being full. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-10Gx24-DM 24-port-10GbE Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX-100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 14 } brcdTMStatsEgressDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " A count of all packets failing to enter egress queues on this traffic manager." ::= { brcdTMStatsEntry 15 } brcdTMStatsEgressDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " A count of all bytes failing to enter egress queues on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module', 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module', 'NI-MLX-10Gx8-X 8-port 10GbE (X) Module', 'BR-MLX-10Gx24-DM 24-port-10GbE Module', 'BR-MLX-40Gx4-M 4-port 40GbE Module', 'BR-MLX-10Gx20 20-port 1/10GbE Module', 'BR-MLX- 100Gx2-CFP2 2-port 100GbE Module' and 'BR-MLX-10Gx4-M-IPSEC 4-port 10GbE Module' cards. 0 is returned for these cards. " ::= { brcdTMStatsEntry 16 } -- The brcdTMUnicastQStatsTable table contains information of Traffic Manager -- (TM) Unicast queue related statistics on NI XMR/MLX platform. brcdTMUcastQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMUcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM unicast queue stats entries. This table contains information of Traffic Manager(TM) unicast queue counters supported by this system." ::= { brcdTMStatisticsInfo 3 } brcdTMUcastQStatsEntry OBJECT-TYPE SYNTAX BrcdTMUcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMUcastQStatsSlotId, brcdTMUcastQStatsTMDeviceId, brcdTMUcastQStatsDstIfIndex, brcdTMUcastQStatsPriority } ::= { brcdTMUcastQStatsTable 1 } BrcdTMUcastQStatsEntry ::= SEQUENCE { brcdTMUcastQStatsSlotId Unsigned32, brcdTMUcastQStatsTMDeviceId Unsigned32, brcdTMUcastQStatsDstIfIndex InterfaceIndex, brcdTMUcastQStatsPriority PortPriorityTC, brcdTMUcastQStatsDescription DisplayString, brcdTMUcastQStatsEnquePkts Counter64, brcdTMUcastQStatsEnqueBytes Counter64, brcdTMUcastQStatsDequePkts Counter64, brcdTMUcastQStatsDequeBytes Counter64, brcdTMUcastQStatsTotalQDiscardPkts Counter64, brcdTMUcastQStatsTotalQDiscardBytes Counter64, brcdTMUcastQStatsOldestDiscardPkts Counter64, brcdTMUcastQStatsOldestDiscardBytes Counter64, brcdTMUcastQStatsWREDDroppedPkts Counter64, brcdTMUcastQStatsWREDDroppedBytes Counter64, brcdTMUcastQStatsMaxQDepthSinceLastRead Counter64, brcdTMUcastQStatsQSize Unsigned32, brcdTMUcastQStatsCreditCount Unsigned32 } brcdTMUcastQStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMUcastQStatsEntry 1 } brcdTMUcastQStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in the system." ::= { brcdTMUcastQStatsEntry 2 } brcdTMUcastQStatsDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination interface index. This is applicable only for the interface on the LP module that is physically present and operationally up" ::= { brcdTMUcastQStatsEntry 3 } brcdTMUcastQStatsPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. This is 1-based index. When the tm-max-queues is set to 4, two consecutive priorities are stored in one unicast queue. In this case, the valid values for this index are 1, 3, 5 and 7." ::= { brcdTMUcastQStatsEntry 4 } brcdTMUcastQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMUcastQStatsTMDeviceId and priorities serviced by this queue." ::= { brcdTMUcastQStatsEntry 5 } brcdTMUcastQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMUcastQStatsEntry 6 } brcdTMUcastQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMUcastQStatsEntry 7 } brcdTMUcastQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMUcastQStatsEntry 8 } brcdTMUcastQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMUcastQStatsEntry 9 } brcdTMUcastQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMUcastQStatsEntry 10 } brcdTMUcastQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMUcastQStatsEntry 11 } brcdTMUcastQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMUcastQStatsEntry 12 } brcdTMUcastQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMUcastQStatsEntry 13 } brcdTMUcastQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMUcastQStatsEntry 14 } brcdTMUcastQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMUcastQStatsEntry 15 } brcdTMUcastQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMUcastQStatsEntry 16 } brcdTMUcastQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMUcastQStatsEntry 17 } brcdTMUcastQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMUcastQStatsEntry 18 } -- The brcdTMMcastQStatsTable table contains information of Traffic Manager -- (TM) Multicast queue related statistics on NI XMR/MLX platform. brcdTMMcastQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMMcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM Multicast queue stats entries. This table contains information of Traffic Manager(TM) Multicast queue counters supported by this system." ::= { brcdTMStatisticsInfo 4 } brcdTMMcastQStatsEntry OBJECT-TYPE SYNTAX BrcdTMMcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMMcastQStatsSlotId, brcdTMMcastQStatsTMDeviceId, brcdTMMcastQStatsPriority } ::= { brcdTMMcastQStatsTable 1 } BrcdTMMcastQStatsEntry ::= SEQUENCE { brcdTMMcastQStatsSlotId Unsigned32, brcdTMMcastQStatsTMDeviceId Unsigned32, brcdTMMcastQStatsPriority INTEGER, brcdTMMcastQStatsDescription DisplayString, brcdTMMcastQStatsEnquePkts Counter64, brcdTMMcastQStatsEnqueBytes Counter64, brcdTMMcastQStatsDequePkts Counter64, brcdTMMcastQStatsDequeBytes Counter64, brcdTMMcastQStatsTotalQDiscardPkts Counter64, brcdTMMcastQStatsTotalQDiscardBytes Counter64, brcdTMMcastQStatsOldestDiscardPkts Counter64, brcdTMMcastQStatsOldestDiscardBytes Counter64, brcdTMMcastQStatsWREDDroppedPkts Counter64, brcdTMMcastQStatsWREDDroppedBytes Counter64, brcdTMMcastQStatsMaxQDepthSinceLastRead Counter64, brcdTMMcastQStatsQSize Unsigned32, brcdTMMcastQStatsCreditCount Unsigned32 } brcdTMMcastQStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMMcastQStatsEntry 1 } brcdTMMcastQStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in this system." ::= { brcdTMMcastQStatsEntry 2 } brcdTMMcastQStatsPriority OBJECT-TYPE SYNTAX INTEGER { priority1And2 (1), -- Priority 1 and 2 priority3And4 (3), -- Priority 3 and 4 priority5And6 (5), -- Priority 5 and 6 priority7And8 (7) -- Priority 7 and 8 } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. Two consecutive priorities are stored in one multicast queue. There are 4 multicast queues per TM for 8 priorities." ::= { brcdTMMcastQStatsEntry 3 } brcdTMMcastQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMMcastQStatsTMDeviceId and priorities serviced by this queue." ::= { brcdTMMcastQStatsEntry 4 } brcdTMMcastQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMMcastQStatsEntry 5 } brcdTMMcastQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMMcastQStatsEntry 6 } brcdTMMcastQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMMcastQStatsEntry 7 } brcdTMMcastQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMMcastQStatsEntry 8 } brcdTMMcastQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMMcastQStatsEntry 9 } brcdTMMcastQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMMcastQStatsEntry 10 } brcdTMMcastQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMMcastQStatsEntry 11 } brcdTMMcastQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMMcastQStatsEntry 12 } brcdTMMcastQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastQStatsEntry 13 } brcdTMMcastQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastQStatsEntry 14 } brcdTMMcastQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMMcastQStatsEntry 15 } brcdTMMcastQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMMcastQStatsEntry 16 } brcdTMMcastQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMMcastQStatsEntry 17 } -- The brcdTMCpuQStatsTable table contains information of Traffic Manager(TM) -- CPU queue related statistics on NI XMR/MLX platform. brcdTMCpuQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMCpuQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM CPU queue stats entries. This table contains information of Traffic Manager(TM) CPU queue counters supported by this system." ::= { brcdTMStatisticsInfo 5 } brcdTMCpuQStatsEntry OBJECT-TYPE SYNTAX BrcdTMCpuQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMCpuQStatsSlotId, brcdTMCpuQStatsTMDeviceId, brcdTMCpuQStatsType, brcdTMCpuQStatsPriority } ::= { brcdTMCpuQStatsTable 1 } BrcdTMCpuQStatsEntry ::= SEQUENCE { brcdTMCpuQStatsSlotId Unsigned32, brcdTMCpuQStatsTMDeviceId Unsigned32, brcdTMCpuQStatsType INTEGER, brcdTMCpuQStatsPriority PortPriorityTC, brcdTMCpuQStatsDescription DisplayString, brcdTMCpuQStatsEnquePkts Counter64, brcdTMCpuQStatsEnqueBytes Counter64, brcdTMCpuQStatsDequePkts Counter64, brcdTMCpuQStatsDequeBytes Counter64, brcdTMCpuQStatsTotalQDiscardPkts Counter64, brcdTMCpuQStatsTotalQDiscardBytes Counter64, brcdTMCpuQStatsOldestDiscardPkts Counter64, brcdTMCpuQStatsOldestDiscardBytes Counter64, brcdTMCpuQStatsWREDDroppedPkts Counter64, brcdTMCpuQStatsWREDDroppedBytes Counter64, brcdTMCpuQStatsMaxQDepthSinceLastRead Counter64, brcdTMCpuQStatsQSize Unsigned32, brcdTMCpuQStatsCreditCount Unsigned32 } brcdTMCpuQStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMCpuQStatsEntry 1 } brcdTMCpuQStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in the system." ::= { brcdTMCpuQStatsEntry 2 } brcdTMCpuQStatsType OBJECT-TYPE SYNTAX INTEGER { cpuQ (1), -- CPU Queue cpuCopyQ(2), -- CPU Copy Queue cpuManagementQ (3), -- CPU Management Queue cpuProtocolQ (4) -- CPU Protocol Queue } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the CPU queue" ::= { brcdTMCpuQStatsEntry 3 } brcdTMCpuQStatsPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. This is 1-based index. The priority 0 maps to 1, priority 1 maps to 2 etc." ::= { brcdTMCpuQStatsEntry 4 } brcdTMCpuQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMCpuQStatsTMDeviceId." ::= { brcdTMCpuQStatsEntry 5 } brcdTMCpuQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMCpuQStatsEntry 6 } brcdTMCpuQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMCpuQStatsEntry 7 } brcdTMCpuQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMCpuQStatsEntry 8 } brcdTMCpuQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMCpuQStatsEntry 9 } brcdTMCpuQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMCpuQStatsEntry 10 } brcdTMCpuQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMCpuQStatsEntry 11 } brcdTMCpuQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMCpuQStatsEntry 12 } brcdTMCpuQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMCpuQStatsEntry 13 } brcdTMCpuQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMCpuQStatsEntry 14 } brcdTMCpuQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMCpuQStatsEntry 15 } brcdTMCpuQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMCpuQStatsEntry 16 } brcdTMCpuQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMCpuQStatsEntry 17 } brcdTMCpuQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMCpuQStatsEntry 18 } -- The brcdTMMcastStreamQStatsTable table contains information of Traffic Manager -- (TM) Multicast stream queue related statistics on NI XMR/MLX platform. brcdTMMcastStreamQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMMcastStreamQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM Multicast stream queue stats entries. This table contains information of Traffic Manager(TM) Multicast stream queue counters supported by this system." ::= { brcdTMStatisticsInfo 6 } brcdTMMcastStreamQStatsEntry OBJECT-TYPE SYNTAX BrcdTMMcastStreamQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM Multicast stream queue counter information." INDEX { brcdTMMcastStreamQStatsAddressType, brcdTMMcastStreamQStatsSource, brcdTMMcastStreamQStatsGroup, brcdTMMcastStreamQStatsGroupPrefixLength } ::= { brcdTMMcastStreamQStatsTable 1 } BrcdTMMcastStreamQStatsEntry ::= SEQUENCE { brcdTMMcastStreamQStatsAddressType InetAddressType, brcdTMMcastStreamQStatsSource InetAddress, brcdTMMcastStreamQStatsGroup InetAddress, brcdTMMcastStreamQStatsGroupPrefixLength InetAddressPrefixLength, brcdTMMcastStreamQStatsPriority INTEGER, brcdTMMcastStreamQStatsEnquePkts Counter64, brcdTMMcastStreamQStatsEnqueBytes Counter64, brcdTMMcastStreamQStatsDequePkts Counter64, brcdTMMcastStreamQStatsDequeBytes Counter64, brcdTMMcastStreamQStatsTotalQDiscardPkts Counter64, brcdTMMcastStreamQStatsTotalQDiscardBytes Counter64, brcdTMMcastStreamQStatsOldestDiscardPkts Counter64, brcdTMMcastStreamQStatsOldestDiscardBytes Counter64, brcdTMMcastStreamQStatsWREDDroppedPkts Counter64, brcdTMMcastStreamQStatsWREDDroppedBytes Counter64, brcdTMMcastStreamQStatsMaxQDepthSinceLastRead Counter64, brcdTMMcastStreamQStatsQSize Unsigned32, brcdTMMcastStreamQStatsCreditCount Unsigned32 } brcdTMMcastStreamQStatsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value indicating the address family of the address contained in brcdTMMcastStreamQStatsSource and brcdTMMcastStreamQStatsGroup. Legal values correspond to the subset of address families for which multicast forwarding is supported." ::= { brcdTMMcastStreamQStatsEntry 1 } brcdTMMcastStreamQStatsSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source IP address of the multicast stream." ::= { brcdTMMcastStreamQStatsEntry 2 } brcdTMMcastStreamQStatsGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Group IP address of the multicast stream." ::= { brcdTMMcastStreamQStatsEntry 3 } brcdTMMcastStreamQStatsGroupPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length in bits of the mask which, when combined with the corresponding value of brcdTMMcastStreamQStatsGroup, identifies the groups for which this entry contains queue statistics. The InetAddressType is given by brcdTMMcastStreamQStatsAddressType. For values 'ipv4' and 'ipv4z', this object must be in the range 4..32. For values 'ipv6' and 'ipv6z', this object must be in the range 8..128." ::= { brcdTMMcastStreamQStatsEntry 4 } brcdTMMcastStreamQStatsPriority OBJECT-TYPE SYNTAX INTEGER { priority1And2 (1), -- Priority 1 and 2 priority3And4 (3), -- Priority 3 and 4 priority5And6 (5), -- Priority 5 and 6 priority7And8 (7) -- Priority 7 and 8 } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. Two consecutive priorities are stored in one multicast stream queue." ::= { brcdTMMcastStreamQStatsEntry 5 } brcdTMMcastStreamQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMMcastStreamQStatsEntry 6 } brcdTMMcastStreamQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMMcastStreamQStatsEntry 7 } brcdTMMcastStreamQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMMcastStreamQStatsEntry 8 } brcdTMMcastStreamQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMMcastStreamQStatsEntry 9 } brcdTMMcastStreamQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMMcastStreamQStatsEntry 10 } brcdTMMcastStreamQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMMcastStreamQStatsEntry 11 } brcdTMMcastStreamQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMMcastStreamQStatsEntry 12 } brcdTMMcastStreamQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMMcastStreamQStatsEntry 13 } brcdTMMcastStreamQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastStreamQStatsEntry 14 } brcdTMMcastStreamQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastStreamQStatsEntry 15 } brcdTMMcastStreamQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMMcastStreamQStatsEntry 16 } brcdTMMcastStreamQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMMcastStreamQStatsEntry 17 } brcdTMMcastStreamQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMMcastStreamQStatsEntry 18 } -- The brcdTMCpuQInfoTable table contains information of Traffic Manager(TM) -- CPU Queues information on NI XMR/MLX platform. brcdTMCpuQInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMCpuQInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM CPU queue information entries. This table contains information of Traffic Manager(TM) CPU Queue information supported by this system." ::= { brcdTMStatisticsInfo 7 } brcdTMCpuQInfoEntry OBJECT-TYPE SYNTAX BrcdTMCpuQInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMCpuQInfoSlotId, brcdTMCpuQInfoTMDeviceId } ::= { brcdTMCpuQInfoTable 1 } BrcdTMCpuQInfoEntry ::= SEQUENCE { brcdTMCpuQInfoSlotId Unsigned32, brcdTMCpuQInfoTMDeviceId Unsigned32, brcdTMCpuQInfoPriority0QSize Unsigned32, brcdTMCpuQInfoPriority0CreditCount Unsigned32, brcdTMCpuQInfoPriority1QSize Unsigned32, brcdTMCpuQInfoPriority1CreditCount Unsigned32, brcdTMCpuQInfoPriority2QSize Unsigned32, brcdTMCpuQInfoPriority2CreditCount Unsigned32, brcdTMCpuQInfoPriority3QSize Unsigned32, brcdTMCpuQInfoPriority3CreditCount Unsigned32, brcdTMCpuQInfoPriority4QSize Unsigned32, brcdTMCpuQInfoPriority4CreditCount Unsigned32, brcdTMCpuQInfoPriority5QSize Unsigned32, brcdTMCpuQInfoPriority5CreditCount Unsigned32, brcdTMCpuQInfoPriority6QSize Unsigned32, brcdTMCpuQInfoPriority6CreditCount Unsigned32, brcdTMCpuQInfoPriority7QSize Unsigned32, brcdTMCpuQInfoPriority7CreditCount Unsigned32 } brcdTMCpuQInfoSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMCpuQInfoEntry 1 } brcdTMCpuQInfoTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in this system." ::= { brcdTMCpuQInfoEntry 2 } brcdTMCpuQInfoPriority0QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 0" ::= { brcdTMCpuQInfoEntry 3 } brcdTMCpuQInfoPriority0CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 0" ::= { brcdTMCpuQInfoEntry 4 } brcdTMCpuQInfoPriority1QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 1" ::= { brcdTMCpuQInfoEntry 5 } brcdTMCpuQInfoPriority1CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 1" ::= { brcdTMCpuQInfoEntry 6 } brcdTMCpuQInfoPriority2QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 2" ::= { brcdTMCpuQInfoEntry 7 } brcdTMCpuQInfoPriority2CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 2" ::= { brcdTMCpuQInfoEntry 8 } brcdTMCpuQInfoPriority3QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 3" ::= { brcdTMCpuQInfoEntry 9 } brcdTMCpuQInfoPriority3CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 3" ::= { brcdTMCpuQInfoEntry 10 } brcdTMCpuQInfoPriority4QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 4" ::= { brcdTMCpuQInfoEntry 11 } brcdTMCpuQInfoPriority4CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 4" ::= { brcdTMCpuQInfoEntry 12 } brcdTMCpuQInfoPriority5QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 5" ::= { brcdTMCpuQInfoEntry 13 } brcdTMCpuQInfoPriority5CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 5" ::= { brcdTMCpuQInfoEntry 14 } brcdTMCpuQInfoPriority6QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 6" ::= { brcdTMCpuQInfoEntry 15 } brcdTMCpuQInfoPriority6CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 6" ::= { brcdTMCpuQInfoEntry 16 } brcdTMCpuQInfoPriority7QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 7" ::= { brcdTMCpuQInfoEntry 17 } brcdTMCpuQInfoPriority7CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 7" ::= { brcdTMCpuQInfoEntry 18 } -- Notifications -- NP Buffer Error brcdNPBufferErrorIngressThresholdExceeded NOTIFICATION-TYPE OBJECTS {brcdNPBufferErrorDescription, brcdNPBufferErrorIngressCurrentEvents} STATUS current DESCRIPTION "The SNMP trap that is generated when the NP ingress buffer error event count within a window exceeds the configured threshold." --#TYPE "Brocade Trap: NP Ingress Buffer Error Threshold Exceeded " --#SUMMARY "NP ingress buffer has %d error events, exceeding configured threshold for interfaces %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 1 } brcdNPBufferErrorEgressThresholdExceeded NOTIFICATION-TYPE OBJECTS {brcdNPBufferErrorDescription, brcdNPBufferErrorEgressCurrentEvents} STATUS current DESCRIPTION "The SNMP trap that is generated when the NP egress buffer error event count within a window exceeds the configured threshold." --#TYPE "Brocade Trap: NP Egress Buffer Error Threshold Exceeded " --#SUMMARY "NP egress buffer has %d error events, exceeding configured threshold for interfaces %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 2 } brcdNPCSRAMErrorThresholdExceeded NOTIFICATION-TYPE OBJECTS {brcdNPCSRAMErrorDescription, brcdNPCSRAMErrorCurrentEvents} STATUS current DESCRIPTION "The SNMP trap that is generated when the NP CSRAM error event count within a window exceeds the configured threshold." --#TYPE "Brocade Trap: NP CSRAM error threshold exceeded" --#SUMMARY "NP CSRAM has %d error events, exceeding configured threshold for interfaces %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 3 } brcdNPLPMRAMErrorThresholdExceeded NOTIFICATION-TYPE OBJECTS {brcdNPLPMRAMErrorName, brcdNPLPMRAMErrorDescription, brcdNPLPMRAMErrorCurrentEvents} STATUS current DESCRIPTION "The SNMP trap that is generated when the NP LPM RAM error event count within a window exceeds the configured threshold." --#TYPE "Brocade Trap: NP LPMRAM error threshold exceeded" --#SUMMARY "NP %s memory has %d error events, exceeding configured threshold for interfaces %s" --#ARGUMENTS { 0, 2, 1 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 4 } -- The brcdNPNotificationSupport Table. -- This table objects are used only by notifications as varbinds. --No other SNMP operations are supported on this table. brcdNPNotificationSupportTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPNotificationSupportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdNPNotificationSupport entries. The objects in this table are used by notifications defined in the brcdNPTMMIBNotification group." ::= { brcdNPTMMIBNotification 5 } brcdNPNotificationSupportEntry OBJECT-TYPE SYNTAX BrcdNPNotificationSupportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of objects used by notifications." INDEX { brcdNPNotificationSupportSlotId, brcdNPNotificationSupportDeviceId } ::= { brcdNPNotificationSupportTable 1 } BrcdNPNotificationSupportEntry ::= SEQUENCE { brcdNPNotificationSupportSlotId Unsigned32, brcdNPNotificationSupportDeviceId Unsigned32, brcdNPNotificationSupportDescription DisplayString, brcdNPNotificationSupportErrorType DisplayString } brcdNPNotificationSupportSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdNPNotificationSupportEntry 1 } brcdNPNotificationSupportDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NP device ID, a number which uniquely identifies the network processor within a linecard in the system." ::= { brcdNPNotificationSupportEntry 2 } brcdNPNotificationSupportDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object can be used by the notifications to represent the range of ports serviced by the NP device." ::= { brcdNPNotificationSupportEntry 3 } brcdNPNotificationSupportErrorType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object can be used by the traps to represent type or location of the error in the NP device." ::= { brcdNPNotificationSupportEntry 4 } brcdNPMemoryParityErrorTrap NOTIFICATION-TYPE OBJECTS {brcdNPNotificationSupportDescription, brcdNPNotificationSupportErrorType } STATUS current DESCRIPTION "The SNMP trap that is generated when a memory parity error occurs in a NP device." --#TYPE "Brocade Trap: Memory parity error on NP device" --#SUMMARY "%s on NP device serving %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= {brcdNPTMMIBNotification 6 } brcdNPMemoryMiscErrorTrap NOTIFICATION-TYPE OBJECTS {brcdNPNotificationSupportDescription, brcdNPNotificationSupportErrorType } STATUS current DESCRIPTION "The SNMP trap that is generated when a miscellaneous memory error occurs in a NP device." --#TYPE "Brocade Trap: Miscellaneous memory error on NP device" --#SUMMARY "%s on NP device serving %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 7 } brcdNPBuffOverFlowErrorTrap NOTIFICATION-TYPE OBJECTS {brcdNPNotificationSupportDescription, brcdNPNotificationSupportErrorType } STATUS current DESCRIPTION "The SNMP trap that is generated when a buffer overflow error occurs in a NP device." --#TYPE "Brocade Trap: Buffer overflow error on NP device" --#SUMMARY "%s on NP device serving %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 8 } brcdNPBuffUnderFlowErrorTrap NOTIFICATION-TYPE OBJECTS {brcdNPNotificationSupportDescription, brcdNPNotificationSupportErrorType } STATUS current DESCRIPTION "The SNMP trap that is generated when a buffer underflow occurs in a NP device." --#TYPE "Brocade Trap: Buffer underflow error on NP device" --#SUMMARY "%s on NP device serving %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 9 } brcdNPECCSingleErrorTrap NOTIFICATION-TYPE OBJECTS {brcdNPNotificationSupportDescription, brcdNPNotificationSupportErrorType } STATUS current DESCRIPTION "The SNMP trap that is generated when a single ECC error occurs in a NP device." --#TYPE "Brocade Trap: Single ECC error on NP device" --#SUMMARY "%s on NP device serving %s" --#ARGUMENTS { 1, 0 } --#SEVERITY WARNING --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 10 } brcdNPECCMultipleErrorTrap NOTIFICATION-TYPE OBJECTS {brcdNPNotificationSupportDescription, brcdNPNotificationSupportErrorType } STATUS current DESCRIPTION "The SNMP trap that is generated when multiple ECC error occurs in a NP device." --#TYPE "Brocade Trap: Multiple ECC error on NP device" --#SUMMARY "%s on NP device serving %s" --#ARGUMENTS { 1, 0 } --#SEVERITY ALERTS --#STATE OPERATIONAL ::= { brcdNPTMMIBNotification 11 } -- The brcdTMDestUcastQStatTable table contains information of Traffic Manager(TM) -- unicast queue counters aggregated across all TMs per destination interface -- information on NI XMR/MLX platform. brcdTMDestUcastQStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMDestUcastQStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of Traffic Manager(TM) unicast queue counters aggregated across all TMs per destination interface per priority. Entry with priority value equals to 128 includes per interface statistics aggregated across all priorities. Please refer to the MIB reference guide for pre-requisites of this table." ::= { brcdTMStatisticsInfo 8 } brcdTMDestUcastQStatEntry OBJECT-TYPE SYNTAX BrcdTMDestUcastQStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM unicast queue counters aggregated across all TMs per a given destination interface per priority." INDEX { brcdTMDestUcastQStatDestIfIndex, brcdTMDestUcastQStatPriority } ::= { brcdTMDestUcastQStatTable 1 } BrcdTMDestUcastQStatEntry ::= SEQUENCE { brcdTMDestUcastQStatDestIfIndex InterfaceIndex, brcdTMDestUcastQStatPriority PortPriorityTC, brcdTMDestUcastQStatEnquePkts Counter64, brcdTMDestUcastQStatEnqueBytes Counter64, brcdTMDestUcastQStatDequePkts Counter64, brcdTMDestUcastQStatDequeBytes Counter64, brcdTMDestUcastQStatTotalQDiscardPkts Counter64, brcdTMDestUcastQStatTotalQDiscardBytes Counter64 } brcdTMDestUcastQStatDestIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ifIndex of the destination interface. All the interfaces of the LP modules that are physically present and operationally up will be included in this table. Starting from NetIron 5.3 release, all deployed LAG interfaces will also be included in this table." ::= { brcdTMDestUcastQStatEntry 1 } brcdTMDestUcastQStatPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. This is 1-based value. The priority0 maps to 1, priority1 maps to 2 etc. Priority value equal to nonPriority(128) indicates the aggregated counters for the given destination port. When the tm-max-queues is set to 4, two consecutive priorities are stored in one unicast queue. In this case, the valid values for this index are 1, 3, 5, 7 and 128." ::= { brcdTMDestUcastQStatEntry 2 } brcdTMDestUcastQStatEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all packets entering ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 3 } brcdTMDestUcastQStatEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all bytes entering ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 4 } brcdTMDestUcastQStatDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all packets dequeued/transmitted from ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 5 } brcdTMDestUcastQStatDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all bytes dequeued/transmitted from ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 6 } brcdTMDestUcastQStatTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For a virtual output queue, total aggregated count across all TMs of packets that were discarded, either before enqueueing due to WRED or maximum queue depth reached, or after enqueueing but before dequeueing due to aging." ::= { brcdTMDestUcastQStatEntry 7 } brcdTMDestUcastQStatTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For a virtual output queue, total aggregated count across all TMs of bytes that were discarded, either before enqueueing due to WRED or maximum queue depth reached, or after enqueueing but before dequeueing due to aging." ::= { brcdTMDestUcastQStatEntry 8 } brcdNPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Identifies the network processor within a module in the system." ::= { brcdNPGlobal 1 } brcdNPLockupRecoveryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Number of times the network processor undergone lockup and recovery." ::= { brcdNPGlobal 2 } -- The brcdTMCpuAggrQStatsTable table contains information of Traffic Manager(TM) -- CPU queue related statistics on NI XMR/MLX platform. brcdTMCpuAggrQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMCpuAggrQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM Aggregate CPU queue stats entries. This table contains information of Aggregation of Traffic Manager(TM) CPU queue counters supported by this system." ::= { brcdTMStatisticsInfo 9 } brcdTMCpuAggrQStatsEntry OBJECT-TYPE SYNTAX BrcdTMCpuAggrQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing Aggregation of TM CPU Queues counter information." INDEX { brcdTMCpuQStatsSlotId, brcdTMCpuQStatsTMDeviceId, brcdTMCpuQStatsPriority } ::= { brcdTMCpuAggrQStatsTable 1 } BrcdTMCpuAggrQStatsEntry ::= SEQUENCE { brcdTMCpuAggrQStatsDescription DisplayString, brcdTMCpuAggrQStatsEnquePkts Counter64, brcdTMCpuAggrQStatsEnqueBytes Counter64, brcdTMCpuAggrQStatsDequePkts Counter64, brcdTMCpuAggrQStatsDequeBytes Counter64, brcdTMCpuAggrQStatsTotalQDiscardPkts Counter64, brcdTMCpuAggrQStatsTotalQDiscardBytes Counter64, brcdTMCpuAggrQStatsOldestDiscardPkts Counter64, brcdTMCpuAggrQStatsOldestDiscardBytes Counter64, brcdTMCpuAggrQStatsWREDDroppedPkts Counter64, brcdTMCpuAggrQStatsWREDDroppedBytes Counter64 } brcdTMCpuAggrQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMCpuQStatsTMDeviceId." ::= { brcdTMCpuAggrQStatsEntry 1 } brcdTMCpuAggrQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An aggregate count of all packets entering ingress queues on this traffic manager" ::= { brcdTMCpuAggrQStatsEntry 2 } brcdTMCpuAggrQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An aggregate count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMCpuAggrQStatsEntry 3 } brcdTMCpuAggrQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A aggregate count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMCpuAggrQStatsEntry 4 } brcdTMCpuAggrQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A aggregate count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMCpuAggrQStatsEntry 5 } brcdTMCpuAggrQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A aggregate count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMCpuAggrQStatsEntry 6 } brcdTMCpuAggrQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An aggregate count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMCpuAggrQStatsEntry 7 } brcdTMCpuAggrQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An aggregate count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMCpuAggrQStatsEntry 8 } brcdTMCpuAggrQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An aggregate count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMCpuAggrQStatsEntry 9 } brcdTMCpuAggrQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An aggregate count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMCpuAggrQStatsEntry 10 } brcdTMCpuAggrQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "An agggregate count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMCpuAggrQStatsEntry 11 } END