BD-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI SwPortIndex FROM Brocade-TC fcSwitch, bcsiModules FROM Brocade-REG-MIB swVfId FROM SW-MIB; bd MODULE-IDENTITY LAST-UPDATED "201404101146Z" -- Apr 10, 2014 11:46am ORGANIZATION "Brocade Communications Systems, Inc.," CONTACT-INFO "Customer Support Group Brocade Communications Systems, 1745 Technology Drive, San Jose, CA 95110 U.S.A Tel: +1-408-392-6061 Fax: +1-408-392-6656 Email: support@Brocade.COM WEB: www.brocade.com" DESCRIPTION "The MIB module is for Brocade's Bottleneck detection feature.Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved." REVISION "201404101146Z" -- Apr 10, 2014 11:46am DESCRIPTION "Added slotPort object in bdStatsEntry and included it in bdTrap and bdClearTrap." ::= { fcSwitch 51 } BdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BD type" SYNTAX INTEGER { congestion (1), latency (2) } bdTraps OBJECT-IDENTITY STATUS current DESCRIPTION "The OID represents the BD Traps." ::= { bd 0 } bdConfig OBJECT-IDENTITY STATUS current DESCRIPTION "The OID represents the BD config." ::= { bd 1 } bdStats OBJECT-IDENTITY STATUS current DESCRIPTION "This OID represents the BD stats." ::= { bd 2 } bdStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the status of bottleneck detection feature if enabled in the switch. The value of this OID if true(1) or false(2)." ::= { bdConfig 1 } bdLThreshold OBJECT-TYPE SYNTAX DisplayString(SIZE(1..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the severity threshold for latency bottleneck. This threshold indicates the percentage of one-second intervals affected by latency conditions within a specified time window. The value of this OID is between 0 and 1." ::= { bdConfig 2 } bdCThreshold OBJECT-TYPE SYNTAX DisplayString(SIZE(1..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the severity threshold for congestion bottleneck. This threshold indicates the percentage of one-second intervals affected by congestion conditions within a specified time window. The value of this OID is between 0 and 1" ::= { bdConfig 3 } bdQTime OBJECT-TYPE SYNTAX INTEGER(1..1000) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of seconds between consecutive alerts. The value assigned to this parameter applies to both latency and congestion monitoring. In this duration, there will not be any traps sent." ::= { bdConfig 4 } bdWinAvgTime OBJECT-TYPE SYNTAX INTEGER (1..100) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time window in seconds over which the percentage of seconds affected by bottleneck conditions is computed and compared with the threshold." ::= { bdConfig 5 } bdThreshold OBJECT-TYPE SYNTAX DisplayString(SIZE(1..5)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This is the severity threshold for latency or congestion bottleneck. This is accessible only for traps. This object is one of the variable binding in bdTrap and bdClearTrap." ::= { bdConfig 6 } nBdType OBJECT-TYPE SYNTAX BdType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This is the type of bottleneck.This is accessible only for traps. This object is one of the variable binding in bdTrap and bdClearTrap. This can have a value of congestion(1) or latency(2)." ::= { bdConfig 7 } bdNumOfEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows in the stats table." ::= { bdStats 1 } bdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of stats entries represents both types of bottleneck. Each sample in the stats is taken every 10 seconds.The maximum number of entries for each port, each type [congestion/latency] is 30." ::= { bdStats 2 } bdStatsEntry OBJECT-TYPE SYNTAX BdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of BD stats information." INDEX { userPortNumber, bdType, bdSampleTime} ::= { bdStatsTable 1 } BdStatsEntry ::= SEQUENCE { userPortNumber SwPortIndex, bdSampleTime Unsigned32, bdType BdType, bdStatsValue10SecsSample DisplayString, bdStatsValue60SecsSample DisplayString, bdStatsValue300SecsSample DisplayString, slotPort DisplayString } userPortNumber OBJECT-TYPE SYNTAX SwPortIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the user port indices of bottleneck monitored ports like F-port, E-port, L-port, FCOE-port." ::= { bdStatsEntry 1 } bdSampleTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the sample time in Unix time format. Ex:1265259069 The above Unix time is equal to Thu, 04 Feb 2010 04:51:09 GMT ." ::= { bdStatsEntry 2 } bdType OBJECT-TYPE SYNTAX BdType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the bottleneck type. The value of this object can be congestion(1) or latency(2)." ::= { bdStatsEntry 3 } bdStatsValue10SecsSample OBJECT-TYPE SYNTAX DisplayString(SIZE(1..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "This sample is average of 10 samples collected every second. If the sample has not been taken yet then bdStatsValue10SecsSample return -1." ::= { bdStatsEntry 4 } bdStatsValue60SecsSample OBJECT-TYPE SYNTAX DisplayString(SIZE(1..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "This sample is average of 60 samples collected every second. If the sample has not been taken yet then bdStatsValue60SecsSample return -1." ::= { bdStatsEntry 5 } bdStatsValue300SecsSample OBJECT-TYPE SYNTAX DisplayString(SIZE(1..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "This sample is average of 300 samples collected every second. If the sample has not been taken yet then bdStatsValue300SecsSample return -1." ::= { bdStatsEntry 6 } slotPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents the slot/port format of userPortNumber for bottleneck monitored ports like F-port, E-port, L-port, FCOE-port." ::= { bdStatsEntry 7 } bdAggrStats OBJECT-TYPE SYNTAX DisplayString(SIZE(1..12)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents the aggregrate stats value. This value is the sum of all the samples divided by average window and multiplied by 100.This is accessible only for traps. This obejct is one of the variable binding in bdTrap and bdClearTrap." ::= { bdStats 3 } bdAbsoluteValue OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents the absolute value of bdAggrStats. It is the number of affected seconds. This object is accessible only for traps and it is one of the variable binding in bdTrap and bdClearTrap." ::= { bdStats 4 } bdAvgFrameSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents the average size in bytes of all frames that were transmitted on the ports during the averaging window. This object is accessible only for traps and it is one of the variable binding in bdTrap and bdClearTrap." ::= { bdStats 5 } bdTrap NOTIFICATION-TYPE OBJECTS { userPortNumber, slotPort, bdWinAvgTime, nBdType, bdThreshold, bdAggrStats, bdAbsoluteValue, swVfId, bdAvgFrameSize } STATUS current DESCRIPTION "trap to be send for bottleneck detection." ::= { bdTraps 1 } bdClearTrap NOTIFICATION-TYPE OBJECTS { userPortNumber, slotPort, bdWinAvgTime, nBdType, bdThreshold, bdAggrStats, bdAbsoluteValue, swVfId, bdAvgFrameSize } STATUS current DESCRIPTION "trap to be send for bottleneck clearance." ::= { bdTraps 2 } END