--**************************************************************************** -- -- Copyright (c) 2009 Broadcom Corporation -- -- This program is the proprietary software of Broadcom Corporation and/or -- its licensors, and may only be used, duplicated, modified or distributed -- pursuant to the terms and conditions of a separate, written license -- agreement executed between you and Broadcom (an "Authorized License"). -- Except as set forth in an Authorized License, Broadcom grants no license -- (express or implied), right to use, or waiver of any kind with respect to -- the Software, and Broadcom expressly reserves all rights in and to the -- Software and all intellectual property rights therein. IF YOU HAVE NO -- AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE IN ANY WAY, -- AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE ALL USE OF THE -- SOFTWARE. -- -- Except as expressly set forth in the Authorized License, -- -- 1. This program, including its structure, sequence and organization, -- constitutes the valuable trade secrets of Broadcom, and you shall use all -- reasonable efforts to protect the confidentiality thereof, and to use this -- information only in connection with your use of Broadcom integrated circuit -- products. -- -- 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED -- "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES, REPRESENTATIONS -- OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH -- RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY DISCLAIMS ANY AND ALL -- IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR -- A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET -- ENJOYMENT, QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. YOU ASSUME -- THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE. -- -- 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM -- OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL, -- INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY -- RELATING TO YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM -- HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN -- EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR U.S. $1, -- WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY -- FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. -- --************************************************************************** -- Filename: brcm-iptv.mib -- Author: Maurice Turcotte -- Creation Date: 22 AUG 09 -- --************************************************************************** -- Description: -- -- enterprise MIB for eCM data to support IP TV -- --************************************************************************** -- Revision History: -- --************************************************************************** BRCM-IPTV-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TruthValue, MacAddress, DisplayString, RowStatus FROM SNMPv2-TC InetAddress, InetAddressType FROM INET-ADDRESS-MIB cableDataMgmtMIBObjects FROM BRCM-CABLEDATA-MGMT-MIB; brcmIptvMgmt MODULE-IDENTITY LAST-UPDATED "200903100000Z" ORGANIZATION "Broadcom Corporation" CONTACT-INFO " BANANA-CABLEDATA (cableData branch of the Broadcom Assigned Numbers and Naming Authority) Broadcom Corporation Postal: 4385 River Green Parkway Duluth, GA 30096 USA Tel: +1 770 232-0018 E-mail: banana-cabledata@broadcom.com" DESCRIPTION "Broadcom proprietary MIB for runtime management and configuration of objects related to IP TV." REVISION "200908220000Z" DESCRIPTION "Initial version of this MIB module." ::= { cableDataMgmtMIBObjects 13 } iptvMgmtBase OBJECT IDENTIFIER ::= { brcmIptvMgmt 1 } brcmIptvChannelInfo OBJECT IDENTIFIER ::= { iptvMgmtBase 1 } -- brcmIptvChannelTable brcmIptvChannelTableDescr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual description of this version of the channel table. It may contain descriptive text, version numbers, dates, or any other printable text, or it may be an empty string." ::= { brcmIptvChannelInfo 1 } brcmIptvChannelTableLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime the last time any entry in the brcmIptvChannelTable was added, deleted or changed." ::= { brcmIptvChannelInfo 2 } brcmIptvChannelTableNotificationInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds to wait between sending notifications of the contents of the table. Setting this object to a value of 0 means that notifications will not be sent." ::= { brcmIptvChannelInfo 3 } brcmIptvChannelTableNotifyNow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true(1) causes a notification of the contents of the table to be sent as soon as possible. Reading this object always returns false(2)." ::= { brcmIptvChannelInfo 4 } brcmIptvChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcmIptvChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of IP TV program information to enable some very basic channel tuning and channel capabilities. This is information gleaned from various Mpeg tables." ::= { brcmIptvChannelInfo 5 } brcmIptvChannelEntry OBJECT-TYPE SYNTAX BrcmIptvChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing tuning info for a single IPTV channel." INDEX { brcmIptvChanId } ::= { brcmIptvChannelTable 1 } BrcmIptvChannelEntry ::= SEQUENCE { brcmIptvChanId Unsigned32, brcmIptvChanName DisplayString, brcmIptvChanVideoPid Unsigned32, brcmIptvChanAudioPid Unsigned32, brcmIptvChanSecondaryAudioPid Unsigned32, brcmIptvChanPmtPid Unsigned32, brcmIptvChanMcastGroupAddrType InetAddressType, brcmIptvChanMcastGroupAddr InetAddress, brcmIptvChanPort Unsigned32, brcmIptvChanFreq Unsigned32, brcmIptvChanRowStatus RowStatus } brcmIptvChanId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The channel ID for this channel." ::= { brcmIptvChannelEntry 1 } brcmIptvChanName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The printable name that will be displayed for this channel." ::= { brcmIptvChannelEntry 2 } brcmIptvChanFreq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The tuner frequency where the Mpeg encoding for this channel is carried." ::= { brcmIptvChannelEntry 3 } brcmIptvChanVideoPid OBJECT-TYPE SYNTAX Unsigned32 (0..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "The Mpeg Pid that carries the video for this channel." ::= { brcmIptvChannelEntry 4 } brcmIptvChanAudioPid OBJECT-TYPE SYNTAX Unsigned32 (0..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "The Mpeg Pid that carries the primary audio for this channel." ::= { brcmIptvChannelEntry 5 } brcmIptvChanSecondaryAudioPid OBJECT-TYPE SYNTAX Unsigned32 (0..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "The Mpeg Pid that carries the secondary audio for this channel. If there is no secondary audio, then this object takes the value 0." DEFVAL { 0 } ::= { brcmIptvChannelEntry 6 } brcmIptvChanPmtPid OBJECT-TYPE SYNTAX Unsigned32 (0..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "The Mpeg Pid that carries the PMT for this channel." ::= { brcmIptvChannelEntry 7 } brcmIptvChanMcastGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of internet address used for brcmIptvChanAddress." ::= { brcmIptvChannelEntry 8 } brcmIptvChanMcastGroupAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The multicast group address that an IPTV device must join in order to receive this channel." ::= { brcmIptvChannelEntry 9 } brcmIptvChanPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The port that an IPTV device must listen on, in order to receive this channel." ::= { brcmIptvChannelEntry 10 } brcmIptvChanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row in the brcmIptvChannelTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The brcmIptvChanName, brcmIptvChanVideoPid, brcmIptvChanAudioPid, brcmIptvChanPmtPid, brcmIptvChanMcastGroupAddrType, brcmIptvChanMcastGroupAddrType, and brcmIptvChanPort objects must be explicitly set. There is no restriction on setting columns in this table when the value of brcmIptvChannelStatus is active(1)." ::= { brcmIptvChannelEntry 11 } END