--**************************************************************************** -- -- Copyright (c) 2002-2011 Broadcom Corporation -- -- This program is the proprietary software of Broadcom Corporation and/or -- its licensors, and may only be used, duplicated, modified or distributed -- pursuant to the terms and conditions of a separate, written license -- agreement executed between you and Broadcom (an "Authorized License"). -- Except as set forth in an Authorized License, Broadcom grants no license -- (express or implied), right to use, or waiver of any kind with respect to -- the Software, and Broadcom expressly reserves all rights in and to the -- Software and all intellectual property rights therein. IF YOU HAVE NO -- AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS SOFTWARE IN ANY WAY, -- AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE ALL USE OF THE -- SOFTWARE. -- -- Except as expressly set forth in the Authorized License, -- -- 1. This program, including its structure, sequence and organization, -- constitutes the valuable trade secrets of Broadcom, and you shall use all -- reasonable efforts to protect the confidentiality thereof, and to use this -- information only in connection with your use of Broadcom integrated circuit -- products. -- -- 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED -- "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES, REPRESENTATIONS -- OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH -- RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY DISCLAIMS ANY AND ALL -- IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR -- A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET -- ENJOYMENT, QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. YOU ASSUME -- THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE. -- -- 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM -- OR ITS LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL, -- INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY -- RELATING TO YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM -- HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN -- EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE SOFTWARE ITSELF OR U.S. $1, -- WHICHEVER IS GREATER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY -- FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. -- --**************************************************************************** -- Filename: brcm-cabledata-factory.mib -- Author: Kevin O'Neal -- Creation Date: 19-june-2002 -- --**************************************************************************** -- Description: -- -- factory MIB for cablemodem factory -- --**************************************************************************** -- Revision History: -- --**************************************************************************** BRCM-CABLEDATA-FACTORY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, IpAddress FROM SNMPv2-SMI TruthValue, DisplayString, MacAddress FROM SNMPv2-TC cableDataPrivateMIBObjects FROM BRCM-CABLEDATA-PRIVATE-MIB; cableDataFactory MODULE-IDENTITY LAST-UPDATED "201105120000Z" ORGANIZATION "Broadcom Corporation" CONTACT-INFO " BANANA-CABLEDATA (cableData branch of the Broadcom Assigned Numbers and Naming Authority) Broadcom Corporation Postal: 4385 River Green Parkway Duluth, GA 30096 USA Tel: +1 770 232-0018 E-mail: banana-cabledata@broadcom.com" DESCRIPTION "Broadcom proprietary MIB for factory configuration and management of objects common to many cableData products." REVISION "201105120000Z" DESCRIPTION "Added object cdFactNonVolOperStatus." REVISION "200702050000Z" DESCRIPTION "Module description was updated. Compilability issues were cleaned up. - Range restriction was added to objects cdSerialNumIndex and cdMacAddrIndex." REVISION "200206190000Z" DESCRIPTION "Initial version of this MIB module." ::= { cableDataPrivateMIBObjects 2 } cableDataFactoryBase OBJECT IDENTIFIER ::= { cableDataFactory 1 } cdFactCommitSettings OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true(1) causes any factory settings which have been provisioned to be committed to permanent storage on the device. Reading this object always returns false(2)." ::= { cableDataFactoryBase 1 } -- 32 bit scratch pad (NEW NV REQUIRED) cdFactScratchPad OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides a 32 bit scratch pad which may be used for any purpose desired. Data written to this scratch pad will be permanently stored on the device." ::= { cableDataFactoryBase 2 } cdFactSerialNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF CdFactSerialNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of serial numbers for this device. A table is necessary for this purpose to accomodate possibly multiple serial numbers for a given device - internal vs. published serial numbers, integrated devices with multiple components, etc." ::= { cableDataFactoryBase 3 } cdFactSerialNumberEntry OBJECT-TYPE SYNTAX CdFactSerialNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry defining a single serial number for this device." INDEX { cdSerialNumIndex } ::= { cdFactSerialNumberTable 1 } CdFactSerialNumberEntry ::= SEQUENCE { cdSerialNumIndex Integer32, cdSerialNumber OCTET STRING, cdSerialNumDescr DisplayString } cdSerialNumIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the instance of this serial number." ::= { cdFactSerialNumberEntry 1 } cdSerialNumber OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this serial number." ::= { cdFactSerialNumberEntry 2 } cdSerialNumDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of what this serial number is used for." ::= { cdFactSerialNumberEntry 3 } cdFactMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF CdFactMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MAC addresses used by this device. MAC addresses in this table may be internal to the device or external, meaning they are assigned by the device to an externally attached peripheral." ::= { cableDataFactoryBase 4 } cdFactMacAddressEntry OBJECT-TYPE SYNTAX CdFactMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry defining a single MAC address for this device." INDEX { cdMacAddrIndex } ::= { cdFactMacAddressTable 1 } CdFactMacAddressEntry ::= SEQUENCE { cdMacAddrIndex Integer32, cdMacAddress MacAddress, cdMacAddrType INTEGER, cdMacAddrDescr DisplayString } cdMacAddrIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the instance of this MAC address." ::= { cdFactMacAddressEntry 1 } cdMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this serial number." ::= { cdFactMacAddressEntry 2 } cdMacAddrType OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the use of this MAC address. A value of internal(1) indicates that this MAC address is used internally by this device. A value of external(2) indicates that this device maintains this MAC address, but rather than using it internally, it is assigned to an attached peripheral." ::= { cdFactMacAddressEntry 3 } cdMacAddrDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of what this MAC address is used for." ::= { cdFactMacAddressEntry 4 } cdFactIpSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF CdFactIpSettingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of settings used when provisioning the IP stack(s) on this device." ::= { cableDataFactoryBase 5 } cdFactIpSettingsEntry OBJECT-TYPE SYNTAX CdFactIpSettingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry defining the characteristics of a single IP stack on this device. This table is indexed by the cdMacAddrIndex value which corresponds to the MAC address associated with this IP stack instance." INDEX { cdMacAddrIndex } ::= { cdFactIpSettingsTable 1 } CdFactIpSettingsEntry ::= SEQUENCE { cdIpDescr DisplayString, cdIpProvMethod INTEGER, cdIpStaticAddress IpAddress, cdIpStaticSubnet IpAddress, cdIpStaticGateway IpAddress } cdIpDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of this IP stack." ::= { cdFactIpSettingsEntry 1 } cdIpProvMethod OBJECT-TYPE SYNTAX INTEGER { static(0), dynamic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether this IP stack will provision itself using the static configuration from this table, or will be dynamically provisioned via DHCP or some other protocol." ::= { cdFactIpSettingsEntry 2 } cdIpStaticAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the IP address that will be assigned to this IP stack if cmIpProvMethod is set to static(0)." ::= { cdFactIpSettingsEntry 3 } cdIpStaticSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the subnet that will be assigned to this IP stack if cmIpProvMethod is set to static(0)." ::= { cdFactIpSettingsEntry 4 } cdIpStaticGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the default gateway that will be assigned to this IP stack if cmIpProvMethod is set to static(0)." ::= { cdFactIpSettingsEntry 5 } cdFactNonVolOperStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), readPending(1), reading(2), writePending(3), writing(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the current state of the non volatile storage on this device. If no read or write operation is currently pending or in progress, then the object will return a value of idle(0). If a read or write operation is currently pending or in progress, the appropriate value will be returned. This object may be polled to determine when a write operation initiated by cdFactCommitSettings is complete." ::= { cableDataFactoryBase 6 } -- -- List of nodes under the factory node. -- -- As new nodes are added they should be added to this MIB to provide a central -- repository of nodes which have been allocated. -- -- BRCM-CM-FACTORY-MIB -- cablemodemFactory MODULE-IDENTITY ::= { cableDataFactory 2 } -- BRCM-CABLEHOME-FACTORY-MIB -- cableHomeFactory MODULE-IDENTITY ::= { cableDataFactory 3 } -- BRCM-V2-FACTORY-MIB -- v2Factory MODULE-IDENTITY ::= { cableDataFactory 4 } -- BRCM-80211-MGMT-MIB -- homeplugFactory MODULE-IDENTITY ::= { cableDataFactory 9 } -- BRCM-EMTA-FACTORY-MIB -- emtaFactory MODULE-IDENTITY ::= { cableDataFactory 6 } -- BRCM-RG-FACTORY-MIB -- residentialGatewayFactory MODULE-IDENTITY ::= { cableDataFactory 7 } -- BRCM-USB-FACTORY-MIB -- usbFactory MODULE-IDENTITY ::= { cableDataFactory 8 } -- BRCM-HOMEPLUG-FACTORY-MIB -- homeplugFactory MODULE-IDENTITY ::= { cableDataFactory 9 } -- This node is provided for vendor extensions to the cableDataFactory MIB. -- Each vendor may request any objects under a node which is located at -- cableDataFactoryVendor.vendorEnterpriseNumber. For example, Broadcom's -- node would be cableDataFactoryVendor.4413 cableDataFactoryVendor OBJECT IDENTIFIER ::= { cableDataFactory 99 } END