-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


---------------------------------------------------------------------------
-- (C)opyright 2009-2014 bintec elmeg GmbH
-- $RCSfile: mib-sysped,v $
-- $Revision: 1.7 $
-- $Date: 2014-02-07 10:37:50 $
---------------------------------------------------------------------------

FEC-SYSPED-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Unsigned32,
    mib-2, enterprises
        FROM SNMPv2-SMI

    DisplayString, TimeStamp, TruthValue
        FROM SNMPv2-TC

    sys, Date
	FROM BINTEC-MIB

    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF;

---------------------------------------------------------------------------

sysPEDMIB MODULE-IDENTITY
    LAST-UPDATED "201201240000Z"
    ORGANIZATION "bintec elmeg GmbH"
    CONTACT-INFO
            "EMail:   info@bintec-elmeg.com
	     Web:     www.bintec-elmeg.com
	    "
    DESCRIPTION
            "The MIB module for PED specific parts.
            "

    ::= { sys 6 }

---------------------------------------------------------------------------
-- OID groups & all tables 
---------------------------------------------------------------------------
sysPedRelay		OBJECT IDENTIFIER	::= { sysPEDMIB 1 }
--        	sysPedRelay1State				1
--        	sysPedRelay2State				2
--        	sysPedRelayCount			       31

sysPedTemperature	OBJECT IDENTIFIER	::= { sysPEDMIB 2 }
--        	sysPedTemperatureCurrent		1
--        	sysPedTemperatureMax			2
--        	sysPedTemperatureMaxTime		3
--        	sysPedTemperatureMin			4
--        	sysPedTemperatureMinTime		5
--        	sysPedTemperatureUpdatePeriod	6
--        	sysPedTemperatureLowerThreshold	7
--        	sysPedTemperatureUpperThreshold	8
--        	sysPedTemperatureAlarm			9


---------------------------------------------------------------------------

---------------------------------------------------------------------------
--  sysPedRelais
---------------------------------------------------------------------------

sysPedRelay1State  OBJECT-TYPE
	SYNTAX 		INTEGER  { open(1), closed(2) }
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Relay control.
		open  : Relay is open.
		closed: Relay is closed.

		Default state is open."
	DEFVAL { open }
::= { sysPedRelay 1 }

sysPedRelay2State  OBJECT-TYPE
	SYNTAX 		INTEGER  { open(1), closed(2) }
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Relay control.
		open  : Relay is open.
		closed: Relay is closed.

		Default state is open."
	DEFVAL { open }
::= { sysPedRelay 2 }

sysPedRelayCount  OBJECT-TYPE
	SYNTAX 		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of available relays in the system."
::= { sysPedRelay 31 }

---------------------------------------------------------------------------

---------------------------------------------------------------------------
--  sysPedTemperature
---------------------------------------------------------------------------

sysPedTemperatureCurrent  OBJECT-TYPE
	SYNTAX 		INTEGER (-55..150)
	UNITS		"degree Centigrade"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Temperature during the last measurement time."
::= { sysPedTemperature 1 }

sysPedTemperatureMax  OBJECT-TYPE
	SYNTAX 		INTEGER (-55..150)
	UNITS		"degree Centigrade"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Maximum observed temperature."
::= { sysPedTemperature 2 }

sysPedTemperatureMaxTime  OBJECT-TYPE
	SYNTAX 		Date
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Point in time the maximum temperature was observed."
::= { sysPedTemperature 3 }

sysPedTemperatureMin  OBJECT-TYPE
	SYNTAX 		INTEGER (-55..150)
	UNITS		"degree Centigrade"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Minimum observed temperature."
::= { sysPedTemperature 4 }

sysPedTemperatureMinTime  OBJECT-TYPE
	SYNTAX 		Date
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Point in time the minimum temperature was observed."
::= { sysPedTemperature 5 }

sysPedTemperatureUpdatePeriod  OBJECT-TYPE
	SYNTAX 		Unsigned32
	UNITS		"seconds"
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Measurement interval of temperature update in seconds.
		0: Disable measurements."
	DEFVAL { 10 }
::= { sysPedTemperature 6 }

sysPedTemperatureLowerThreshold  OBJECT-TYPE
	SYNTAX 		INTEGER (-55..125)
	UNITS		"degree Centigrade"
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Minimal allowed temperature. If temperature falls below
		this threshold, a syslog message is generated."
	DEFVAL { -25 }
::= { sysPedTemperature 7 }

sysPedTemperatureUpperThreshold  OBJECT-TYPE
	SYNTAX 		INTEGER (-55..125)
	UNITS		"degree Centigrade"
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Maximal allowed temperature. If temperature raises above
		this threshold, a syslog message is generated."
	DEFVAL { 70 }
::= { sysPedTemperature 8 }

sysPedTemperatureAlarm  OBJECT-TYPE
	SYNTAX 		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Indicates if the defined temperature thresholds are
		violated."
	DEFVAL { false }
::= { sysPedTemperature 9 }

---------------------------------------------------------------------------
END