-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00 -- (C)opyright 1999-2014 bintec elmeg GmbH -- All Rights reserved -- $RCSfile: mibvrrp,v $ -- $Revision: 1.13 $ BRRP-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Counter, TimeTicks, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- MIB-II (same prefix as MIB-I) bintec OBJECT IDENTIFIER ::= { enterprises 272 } bibo OBJECT IDENTIFIER ::= { bintec 4 } brrp OBJECT IDENTIFIER ::= { bibo 40 } -- BRRP - used by watchdog daemon to implement redundancy -- ******************************************************************* -- BRRP Operations Table -- ******************************************************************* biboBrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF BiboBrrpOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Operations table for a BRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'biboBrrpOperEntry' items." ::= { brrp 1 } biboBrrpOperEntry OBJECT-TYPE SYNTAX BiboBrrpOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the biboBrrpOperTable containing the operational characteristics of a virtual router. On a BRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `biboBrrpOperAdminState' is `disabled' and the `biboBrrpOperState' has transitioned to `initialize'." INDEX { biboBrrpVirtIfIndex, biboBrrpOperVrId } ::= { biboBrrpOperTable 1 } BiboBrrpOperEntry ::= SEQUENCE { biboBrrpOperVrId INTEGER, biboBrrpVirtIfIndex INTEGER, biboBrrpOperMasterIpAddr IpAddress, biboBrrpOperState INTEGER, biboBrrpOperAdminState INTEGER, biboBrrpOperPriority INTEGER, biboBrrpOperAuthType INTEGER, biboBrrpOperAuthKey OCTET STRING, biboBrrpOperAdvertisementInterval INTEGER, biboBrrpOperMasterDownRetries INTEGER, biboBrrpOperPreemptMode INTEGER, biboBrrpOperVirtualRouterUpTime TimeTicks, -- biboBrrpOperProtocol INTEGER, biboBrrpMasterIfIndex INTEGER, biboBrrpOperDecrPrio INTEGER } biboBrrpOperVrId OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." DEFVAL { 255 } ::= { biboBrrpOperEntry 1 } biboBrrpVirtIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index of the virtual interface used by the virtual router." ::= { biboBrrpOperEntry 2 } biboBrrpOperMasterIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The master router's real (primary) IP address. This is the IP address listed as the source in BRRP advertisement last received by this virtual router." ::= { biboBrrpOperEntry 3 } biboBrrpOperState OBJECT-TYPE SYNTAX INTEGER { initialize(1), backup(2), master(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the virtual router. This object has four defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `brrpOperAdminState' object (below) initiates transitions in the value of this object." DEFVAL { initialize } ::= { biboBrrpOperEntry 4 } biboBrrpOperAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `brrpOperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `brrpOperAdminState' object must be set to `down' prior to modifying the other read-only objects in the conceptual row. The value of the `brrpOperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'. Use `delete' to delete this table entry permanently." DEFVAL { down } ::= { biboBrrpOperEntry 5 } biboBrrpOperPriority OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in BRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." DEFVAL { 100 } ::= { biboBrrpOperEntry 6 } biboBrrpOperAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication(1), -- BRRP protocol exchanges are not -- authenticated. simpleTextPassword(2), -- Exchanges are authenticated by a -- clear text password. ipAuthenticationHeader(3) -- Exchanges are authenticated using -- the IP authentication header. } ACCESS read-write STATUS mandatory DESCRIPTION "Authentication type used for BRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track." DEFVAL { noAuthentication } ::= { biboBrrpOperEntry 7 } biboBrrpOperAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The Authentication Key. This object is set according to the value of the 'brrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, biboBrrpOperAuthKey always returns an Octet String of length zero." ::= { biboBrrpOperEntry 8 } biboBrrpOperAdvertisementInterval OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval, in seconds, between sending advertisement messages. Only the master router sends BRRP advertisements." DEFVAL { 1 } ::= { biboBrrpOperEntry 9 } biboBrrpOperMasterDownRetries OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Calculation of the MasterDownInterval from RFC 2338: Skew_Time = ((256 - Priority) / 256) MasterDownInterval = (MasterDownRetries * AdvertisementInterval) + Skew_Time" DEFVAL { 3 } ::= { biboBrrpOperEntry 10 } biboBrrpOperPreemptMode OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { biboBrrpOperEntry 11 } biboBrrpOperVirtualRouterUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This is the value of the `sysUpTime' object when this virtual router (i.e., the `brrpOperState') transitioned out of `initialized'." ::= { biboBrrpOperEntry 12 } biboBrrpMasterIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index of the master interface controlling the virtual router." ::= { biboBrrpOperEntry 14 } biboBrrpOperDecrPrio OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This is the value currently decremented from the virtual router priority to be used for the virtual router master election process Actual priority = (biboBrrpOperPriority - biboBrrpOperDecrPrio) This value could be either '0' or 'aliveSlaveBrrpDecrPrio': - it is set to 'aliveSlaveBrrpDecrPrio' when the alive surveillance (aliveSlaveBrrpState) triggers 'decrPrio' while this router state is 'up' (biboBrrpOperState). - it is cleared to '0' when the alive surveillance (aliveSlaveBrrpState) triggers 'up' while this router state is already 'up' (biboBrrpOperState). The default value is '0'." DEFVAL { 0 } ::= { biboBrrpOperEntry 15 } -- ******************************************************************* -- BRRP Router Statistics Table -- ******************************************************************* biboBrrpRouterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BiboBrrpRouterStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of virtual router statistics." ::= { brrp 2 } biboBrrpRouterStatsEntry OBJECT-TYPE SYNTAX BiboBrrpRouterStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing statistics information about a given virtual router." INDEX { biboBrrpStatsIfIndex, biboBrrpStatsVrId } ::= { biboBrrpRouterStatsTable 1 } BiboBrrpRouterStatsEntry ::= SEQUENCE { biboBrrpStatsVrId INTEGER, biboBrrpStatsIfIndex INTEGER, biboBrrpStatsBecomeMaster Counter, biboBrrpStatsAdvertiseRcvd Counter, biboBrrpStatsAdvertiseIntervalErrors Counter, biboBrrpStatsAuthFailures Counter, biboBrrpStatsIpTtlErrors Counter, biboBrrpStatsInvalidTypePktsRcvd Counter, biboBrrpStatsInvalidAuthType Counter, biboBrrpStatsAuthTypeMismatch Counter, biboBrrpStatsPacketLengthErrors Counter, biboBrrpStatsChecksumErrors Counter, biboBrrpStatsVersionErrors Counter } biboBrrpStatsVrId OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { biboBrrpRouterStatsEntry 1 } biboBrrpStatsIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the virtual interface used by the virtual router." ::= { biboBrrpRouterStatsEntry 2 } biboBrrpStatsBecomeMaster OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times that this virtual router's state has transitioned to MASTER." ::= { biboBrrpRouterStatsEntry 3 } biboBrrpStatsAdvertiseRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of BRRP advertisements received by this virtual router." ::= { biboBrrpRouterStatsEntry 4 } biboBrrpStatsAdvertiseIntervalErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of BRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router." ::= { biboBrrpRouterStatsEntry 5 } biboBrrpStatsAuthFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of BRRP packets received that do not pass the authentication check." ::= { biboBrrpRouterStatsEntry 6 } biboBrrpStatsIpTtlErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of BRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255." ::= { biboBrrpRouterStatsEntry 7 } biboBrrpStatsInvalidTypePktsRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BRRP packets received by the virtual router with an invalid value in the 'type' field." ::= { biboBrrpRouterStatsEntry 8 } biboBrrpStatsInvalidAuthType OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received with an unknown authentication type." ::= { biboBrrpRouterStatsEntry 9 } biboBrrpStatsAuthTypeMismatch OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`brrpOperAuthType')." ::= { biboBrrpRouterStatsEntry 10 } biboBrrpStatsPacketLengthErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received with a packet length less than the length of the BRRP header." ::= { biboBrrpRouterStatsEntry 11 } biboBrrpStatsChecksumErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of BRRP packets received with an invalid BRRP checksum value." ::= { biboBrrpRouterStatsEntry 12 } biboBrrpStatsVersionErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of BRRP packets received with an unknown or unsupported version number." ::= { biboBrrpRouterStatsEntry 13 } END