-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


---------------------------------------------------------------------------
-- (C)opyright 2008-2014 bintec elmeg GmbH
-- $RCSfile: mib-itp,v $
-- $Revision: 1.9 $
-- $Date: 2014-02-07 10:37:49 $
-- Author: mmossner
--------------------------------------------------------------------------


BINTEC-ITP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Integer32, Unsigned32, Counter32, Counter64, IpAddress, TimeTicks,
    mib-2, enterprises
        FROM SNMPv2-SMI

    DisplayString, TimeStamp
        FROM SNMPv2-TC

    isdn, Date, BitValue, HexValue
	FROM BINTEC-MIB

    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF;


itpMIB MODULE-IDENTITY
    LAST-UPDATED "200702270000Z"
    ORGANIZATION "bintec elmeg GmbH"
    CONTACT-INFO
            "EMail: info@bintec-elmeg.com
         Web: www.bintec-elmeg.com
        "
    DESCRIPTION
        "MIB for ISDN Theft Protection"
    REVISION    "200702270000Z"
    DESCRIPTION
        "ITP MIB."

    ::= { isdn 18 }

itp OBJECT IDENTIFIER ::= { itpMIB 1 }

itpAdmin  OBJECT IDENTIFIER ::= { itp 1 }
    itpAdminMode OBJECT-TYPE
    SYNTAX Integer32 { 
        enabled(1),
        disabled(2)
    }
    ACCESS read-write
    STATUS current
    DESCRIPTION
    "This object represents the operation mode of the ISDN Theft Protection.
     In enabled(1) mode ITP is active, setting the mode to disabled(2) ITP is
     inactive. 
    "
    DEFVAL { disabled }
    ::= { itpAdmin 1 }

    itpAdminDialNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..63))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This represents the number which should be dialled."
    ::= { itpAdmin 2 }
    
    itpAdminOutgoingNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..63))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This represents the number which should be send as outgoing/dialing
         number."
    ::= { itpAdmin 3 }

    itpAdminIncomingNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..63))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This represents the number which an incoming call number should
         match to."
    ::= { itpAdmin 4 }

    itpAdminStkMask OBJECT-TYPE
    SYNTAX      BitValue 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This binary number defines the ISDN stack(s) to use.
         Each bit corresponds to one entry in the isdnStkTable,
         the rightmost bit selects entry 0, the next bit selects
         entry 1, and so forth. A mask of 0 disables dialup completely,
         while a mask of -1 (default) enables dialup on all available
         ISDN stacks."
    DEFVAL { 4294967295 }            
    ::= { itpAdmin 5 }

    itpAdminTimeOut OBJECT-TYPE
    SYNTAX      Integer32 (2..20)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Sets the TimeOut for a calling try."
    DEFVAL { 5 }            
    ::= { itpAdmin 6 }

    itpAdminMaxRetries OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of retries which should be made before ITP should be
         set to failed."
    DEFVAL { 3 }
    ::= { itpAdmin 7 }

    itpAdminRetriesStat OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Shows how much retries are already made."
    DEFVAL { 0 }
    ::= { itpAdmin 8 }

    itpAdminStatus OBJECT-TYPE
    SYNTAX      Integer32 { pending(1), successful(2), failed(3) } 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the status of the ISDN Theft Protection.
         pending(1) means it is still at work, on success the status is
         successful(2), else the status is failed(3)."
    DEFVAL { 1 }
    ::= { itpAdmin 9 }


itpIfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF ItpIfEntry
    MAX-ACCESS          not-accessible
    STATUS              current
    DESCRIPTION
        "The itpIfTable contains the interfaces which should be
         controlled by the ISDN Theft Protection.
        " 
    ::= { itp 2 }

itpIfEntry OBJECT-TYPE
    SYNTAX      ItpIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An entry of the itpIfTable."
    INDEX { itpIfStartIndex, itpIfStopIndex }
    ::= { itpIfTable 1 }


ItpIfEntry ::=
    SEQUENCE {
        itpIfAdminMode     INTEGER,
        itpIfStartIndex    Integer32,
        itpIfStopIndex     Integer32
    }

    itpIfAdminMode OBJECT-TYPE
    SYNTAX      INTEGER { enabled(1), disabled(2), delete(3) } 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Indicates whether this entry should be used for ITP or not."
    DEFVAL { 1 }             
    ::= { itpIfEntry 1 }
    
    itpIfStartIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Defines the index where this range should start."
    DEFVAL { 0 }
    ::= { itpIfEntry 2 }

    itpIfStopIndex OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Defines the index where this range should stop."
    DEFVAL { 0 }
    ::= { itpIfEntry 3 }

END