-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00 --------------------------------------------------------------------------- -- (C)opyright 2013-2014 bintec elmeg GmbH -- $RCSfile: mib-gps,v $ -- $Revision: 1.6 $ -- $Date: 2014-02-07 10:37:49 $ --------------------------------------------------------------------------- BINTEC-GPS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2, enterprises FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC bibo, Date FROM BINTEC-MIB; gpsMIB MODULE-IDENTITY LAST-UPDATED "201307240000Z" ORGANIZATION "bintec elmeg GmbH" CONTACT-INFO "EMail: info@bintec-elmeg.com Web: www.bintec-elmeg.com " DESCRIPTION "The MIB module for GPS data entities." REVISION "20130327000Z" DESCRIPTION "Initial version." ::= { bibo 68 } gpsConfig OBJECT IDENTIFIER ::= { gpsMIB 1 } gpsConfigNMEATcpPort OBJECT-TYPE SYNTAX INTEGER (-1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the TCP port the NMEA data is exported to, use a value of -1 to disable exporting of NMEA data via TCP." DEFVAL { -1 } ::= { gpsConfig 1 } gpsConfigTimeUpdate OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies interval for updating the system time via GPS time. -1 means don't use GPS time, 0 update on every GPS fix." DEFVAL { -1 } ::= { gpsConfig 2 } gpsConfigOnlineMap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables usgae of online maps in GUI." DEFVAL { disabled } ::= { gpsConfig 3 } gpsCoordinates OBJECT IDENTIFIER ::= { gpsMIB 2 } gpsCoordinatesLastFix OBJECT-TYPE SYNTAX Date MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the last GPS fix." ::= { gpsCoordinates 1 } gpsCoordinatesLongDeg OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The longitudinal degrees of the last fix." ::= { gpsCoordinates 2 } gpsCoordinatesLongMinInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The integer part of the longitudinal minutes of the last fix." ::= { gpsCoordinates 3 } gpsCoordinatesLongMinDec OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The decimal part of the longitudinal minutes of the last fix." ::= { gpsCoordinates 4 } gpsCoordinatesLongCard OBJECT-TYPE SYNTAX INTEGER { east(1), west(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The longitudinal cardinals of the last fix." DEFVAL { west } ::= { gpsCoordinates 5 } gpsCoordinatesLatDeg OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The latitudinal degrees of the last fix." ::= { gpsCoordinates 6 } gpsCoordinatesLatMinInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The integer part of the latitudinal minutes of the last fix." ::= { gpsCoordinates 7 } gpsCoordinatesLatMinDec OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The decimal part of the latitudinal minutes of the last fix." ::= { gpsCoordinates 8 } gpsCoordinatesLatCard OBJECT-TYPE SYNTAX INTEGER { north(1), south(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The latitudinal cardinals of the last fix." DEFVAL { north } ::= { gpsCoordinates 9 } gpsZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF GpsZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing GPS zones." ::= { gpsMIB 3 } gpsZoneEntry OBJECT-TYPE SYNTAX GpsZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a GPS zone. A zone is defined by two points A and B. A is the upper left point, B the lower right point." INDEX { gpsZoneIndex } ::= { gpsZoneTable 1 } GpsZoneEntry ::= SEQUENCE { gpsZoneIndex INTEGER, gpsZonePointALongDeg INTEGER, gpsZonePointALongMinInt INTEGER, gpsZonePointALongMinDec INTEGER, gpsZonePointALongCard INTEGER, gpsZonePointALatDeg INTEGER, gpsZonePointALatMinInt INTEGER, gpsZonePointALatMinDec INTEGER, gpsZonePointALatCard INTEGER, gpsZonePointBLongDeg INTEGER, gpsZonePointBLongMinInt INTEGER, gpsZonePointBLongMinDec INTEGER, gpsZonePointBLongCard INTEGER, gpsZonePointBLatDeg INTEGER, gpsZonePointBLatMinInt INTEGER, gpsZonePointBLatMinDec INTEGER, gpsZonePointBLatCard INTEGER, gpsZoneTimeToTrue INTEGER, gpsZoneTimeToFalse INTEGER, gpsZoneHdop INTEGER, gpsZoneRowStatus RowStatus, gpsZoneValid INTEGER, gpsZoneInitialState INTEGER, gpsZoneInitialStateTime INTEGER, gpsZoneCoverageFailState INTEGER, gpsZoneCoverageFailStateTime INTEGER, gpsZoneDescription DisplayString } gpsZoneIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The index of a GPS location zone." ::= { gpsZoneEntry 1 } gpsZonePointALongDeg OBJECT-TYPE SYNTAX INTEGER (0..180) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of the degrees for the longitudinal position of point A. This can vary between 0 and 180." ::= { gpsZoneEntry 2 } gpsZonePointALongMinInt OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the whole part of the longitudinal minutes of point A. This can vary between 0 and 59." ::= { gpsZoneEntry 3 } gpsZonePointALongMinDec OBJECT-TYPE SYNTAX INTEGER (0..9999) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the decimal part of the longitudinal minutes of point A. This can vary between 0 and 9999." ::= { gpsZoneEntry 4 } gpsZonePointALongCard OBJECT-TYPE SYNTAX INTEGER { east(1), west(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cardinal point to the longitude where the point is found. This can take the values East and West. Default is West." DEFVAL { west } ::= { gpsZoneEntry 5 } gpsZonePointALatDeg OBJECT-TYPE SYNTAX INTEGER (0..90) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of the degrees for the latitudinal position of point A. This can vary between 0 and 90." ::= { gpsZoneEntry 6 } gpsZonePointALatMinInt OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the whole part of the latitudinal minutes of point A. This can vary between 0 and 59." ::= { gpsZoneEntry 7 } gpsZonePointALatMinDec OBJECT-TYPE SYNTAX INTEGER (0..9999) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the decimal part of the latitudinal minutes of point A. This can vary between 0 and 9999." ::= { gpsZoneEntry 8 } gpsZonePointALatCard OBJECT-TYPE SYNTAX INTEGER { north(1), south(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cardinal point to the latitudinal where the point is found. This can take the values north and south. Default is north." DEFVAL { north } ::= { gpsZoneEntry 9 } gpsZonePointBLongDeg OBJECT-TYPE SYNTAX INTEGER (0..180) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of the degrees for the longitudinal position of point B. This can vary between 0 and 180." ::= { gpsZoneEntry 10 } gpsZonePointBLongMinInt OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the whole part of the longitudinal minutes of point B. This can vary between 0 and 59." ::= { gpsZoneEntry 11 } gpsZonePointBLongMinDec OBJECT-TYPE SYNTAX INTEGER (0..9999) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the decimal part of the longitudinal minutes of point B. This can vary between 0 and 9999." ::= { gpsZoneEntry 12 } gpsZonePointBLongCard OBJECT-TYPE SYNTAX INTEGER { east(1), west(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cardinal point to the longitude where the point is found. This can take the values East and West. Default is West." DEFVAL { west } ::= { gpsZoneEntry 13 } gpsZonePointBLatDeg OBJECT-TYPE SYNTAX INTEGER (0..90) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of the degrees for the latitudinal position of point B. This can vary between 0 and 90." ::= { gpsZoneEntry 14 } gpsZonePointBLatMinInt OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the whole part of the latitudinal minutes of point B. This can vary between 0 and 59." ::= { gpsZoneEntry 15 } gpsZonePointBLatMinDec OBJECT-TYPE SYNTAX INTEGER (0..9999) MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the decimal part of the latitudinal minutes of point B. This can vary between 0 and 9999." ::= { gpsZoneEntry 16 } gpsZonePointBLatCard OBJECT-TYPE SYNTAX INTEGER { north(1), south(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cardinal point to the latitudinal where the point is found. This can take the values north and south. Default is north." DEFVAL { north } ::= { gpsZoneEntry 17 } gpsZoneTimeToTrue OBJECT-TYPE SYNTAX INTEGER (0..1000000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the time that must lapse so the zone can pass from FALSE to TRUE when the device has good GPS coverage. This transition is invoked as the GPS reveiver passes to being 'inside' the zone." DEFVAL { 10 } ::= { gpsZoneEntry 18 } gpsZoneTimeToFalse OBJECT-TYPE SYNTAX INTEGER (0..1000000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object define the time that must laspe so the zone can pass from TRUE to FALSE when the device has good GPS coverage. This transition is invoked as the GPS receiver passes to being 'outside' the zone." DEFVAL { 10 } ::= { gpsZoneEntry 19 } gpsZoneHdop OBJECT-TYPE SYNTAX INTEGER (2..20) MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the HDOP limit value to take the GPS information as valid. When the HDOP calculated by the GPS receiver surpasses the value configured with this parameter, the locking information is discarded so what is shown is as if there were no GPS signal (NO SIGNAL). HDOP (Horizontal Dilution Of Precision) is the most commonly used parameter from all those offered by a GPS receiver, to evaluate the locking accuracy over the earth's surface." DEFVAL { 6 } ::= { gpsZoneEntry 20 } gpsZoneRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row-status of this GPS zone entry." ::= { gpsZoneEntry 21 } gpsZoneValid OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows if the current position is in the defined zone (true) or not (false)." DEFVAL { false } ::= { gpsZoneEntry 22} gpsZoneInitialState OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), true-time-false(3), false-time-true(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the state the GPS zone must take when the device is switched on and there is no GPS signal available. true: The initial state of the zone is TRUE. false: The initial state of the zone is FALSE. true-time-false: The initial state is TRUE and changes to FALSE if no GPS signal is available for the duration defined by InitialStateTime. false-time-true: The initial state is FALSE and changes to TRUE if no GPS signal is available for the duration defined by InitialStateTime." DEFVAL { false } ::= { gpsZoneEntry 23} gpsZoneInitialStateTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the time for state transition defined by InitialState when the device is switched on and no GPS signal is available." DEFVAL { 120 } ::= { gpsZoneEntry 24 } gpsZoneCoverageFailState OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), true-time-false(3), false-time-true(4), last-state(5), last-time-false(6), last-time-true(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the state the GPS zone must take when the GPS receiver loses coverage or doesn't have enough to accurately calculate the geographical position. true: The state of the zone is TRUE. false: The state of the zone is FALSE. true-time-false: The state is TRUE and changes to FALSE if no GPS signal is available for the duration defined by CoverageFailStateTime. false-time-true: The state is FALSE and changes to TRUE if no GPS signal is available for the duration defined by CoverageFailStateTime. last-state: The state remains in the same state. last-time-false: The state remains and changes to FALSE if no GPS signal is available for the duration defined by CoverageFailStateTime. last-time-true: The state remains and changes to TRUE if no GPS signal is available for the duration defined by CoverageFailStateTime." DEFVAL { last-state } ::= { gpsZoneEntry 25} gpsZoneCoverageFailStateTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the time for state transition defined by CoverageFailState when no GPS signal is available." DEFVAL { 120 } ::= { gpsZoneEntry 26 } gpsZoneDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "A textual string describing this zone." ::= { gpsZoneEntry 27 } END