-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
-- $Revision: 1.10 $ 

BIANCA-ETH-IF-MIB DEFINITIONS ::= BEGIN


	IMPORTS
	    NetworkAddress, IpAddress, Counter, Gauge, TimeTicks, enterprises
		FROM RFC1155-SMI

	    OBJECT-TYPE
		FROM RFC-1212;

	--  This MIB module uses the extended OBJECT-TYPE macro as
	--  defined in [14];


	--  MIB-II (same prefix as MIB-I)
	bintec 		OBJECT IDENTIFIER ::= { enterprises 272 }
	bibo		OBJECT IDENTIFIER ::= { bintec 4 }
	eth		OBJECT IDENTIFIER 
	::= { bibo 37 }

    -- Interfaces Group

    -- Management Information for non-standard interface settings of
    -- BIANCA/BRICK

	Date ::= INTEGER
	HexValue ::= INTEGER
        PhysAddress ::= OCTET STRING


        ethIfTable OBJECT-TYPE
            SYNTAX  SEQUENCE OF EthIfEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
		"The ethIfTable allows to perform interface status changes of
		 one or more interfaces based on a status transition of another
		 interface."
	::= { eth 1 }

	ethIfEntry OBJECT-TYPE
            SYNTAX  EthIfEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
		""
	    INDEX   { ethIfIndex }
              ::= { ethIfTable 1 }

	EthIfEntry ::=
            SEQUENCE {
		ethIfIndex			INTEGER,
		ethIfPortGroup			INTEGER,
		ethIfMACSlot			INTEGER,
		ethIfMACUnit			INTEGER,
		ethIfAdminStatus		INTEGER
            }

        ethIfIndex OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-only
              STATUS  mandatory

              DESCRIPTION
		"A unique value for each interface. Its value ranges  
                between 1000 and the value of ifNumber. The following 
                information is encoded in the ifIndex:
                
                 a. An ifIndex between 1000 and 9999 define  
                    hardware  interfaces with the following attributes.
                 
                 b. An ifIndex greater than or equal to 10000 defines
                    a software interface. Examples include the 
                    dialup-interfaces as defined in the  biboPPPTable."

              ::= { ethIfEntry 1 }

-- obsolete	ethIfPhysAddr OBJECT-TYPE ::= { ethIfEntry 2 }

-- obsolete	ethIfOrigPhysAddr OBJECT-TYPE ::= { ethIfEntry 3 }

	ethIfPortGroup OBJECT-TYPE
              SYNTAX  INTEGER (0..99)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The port group the interface is member of."
              ::= { ethIfEntry 4 }

	ethIfMACSlot OBJECT-TYPE
              SYNTAX  INTEGER (0..9)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The slot of the connected media access controller."
              ::= { ethIfEntry 5 }

	ethIfMACUnit OBJECT-TYPE
              SYNTAX  INTEGER (0..9)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The unit of the connected media access controller."
              ::= { ethIfEntry 6 }

	ethIfAdminStatus OBJECT-TYPE
              SYNTAX  INTEGER { 
	          down(1),
		  up(2)
	      }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      ""
	      DEFVAL  { down }
              ::= { ethIfEntry 7 }

END