-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
-- $RCSfile: mib-efmoatm,v $
-- $Revision: 1.4 $

BIANCA-BRICK-EFMOATM-MIB DEFINITIONS ::= BEGIN

        IMPORTS
            IpAddress, Counter, Gauge, TimeTicks, enterprises
                FROM RFC1155-SMI

            DisplayString
                FROM RFC1158-MIB
 
	    PhysAddress 
		FROM RFC1213-MIB

            OBJECT-TYPE
                FROM RFC-1212

	    atm
		FROM BINTEC-MIB;

---
--- Ethernet first mile over ATM (Utopia) PVC table
---

	efmoaPvcTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF EfmoaPvcEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
	        "The efmoaPvcTable displays all virtual ethernets defined for
		 a VCI/VPI on a specified hardware."
	::= { atm 22 }


	efmoaPvcEntry OBJECT-TYPE
	    SYNTAX  EfmoaPvcEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current

	    DESCRIPTION
		""
	    INDEX { efmoaPvcAtmIfIndex, efmoaPvcDescr }
	::= { efmoaPvcTable 1 }

	EfmoaPvcEntry ::=
	    SEQUENCE {
		efmoaPvcIfIndex  		INTEGER,
		efmoaPvcFilter  		INTEGER,
		efmoaPvcDescr			DisplayString,
		efmoaPvcAtmIfIndex		INTEGER,
		efmoaPvcVpi			INTEGER,
		efmoaPvcVci			INTEGER,
		efmoaPvcEncapsulation		INTEGER,
		efmoaPvcPhysAddress		PhysAddress
	    }

	efmoaPvcIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
	        "This object contains an interface index and assigns the
                 row to an entry in ifTable. When creating new entries
                 in the table, the value of this object shall be set to 0.
                 The next free ifIndex value is than allocated and assigned
		 to the object. At the same time a new interface is created
		 in the IfTable."
            DEFVAL { 0 }
	::= { efmoaPvcEntry 1 }

        efmoaPvcFilter OBJECT-TYPE
	    SYNTAX  INTEGER {
		none(2),        -- PVC for packets not matching other filters
		vlan-id(3),     -- vlan id
		dst-mac(4)     -- destination MAC address
	    }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "The VLAN-Tag-Id used for the EFM interface.
                 "
            DEFVAL { none }
        ::= { efmoaPvcEntry 2 }

        efmoaPvcDescr OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "Short description of the configured PVC"
        ::= { efmoaPvcEntry 3 }
                
	efmoaPvcAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The Index to the ATM hardware."
	::= { efmoaPvcEntry 4 }

	efmoaPvcVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
	    	"The VPI value of this Virtual Path Connection."
	    DEFVAL { 0 }
	::= { efmoaPvcEntry 5 }

	efmoaPvcVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	    DEFVAL { 0 }
	::= { efmoaPvcEntry 6 }
	
	efmoaPvcEncapsulation OBJECT-TYPE
	    SYNTAX  INTEGER {
		bridged-no-fcs(1),	-- without frame checksum (FCS
		bridged-fcs(2),		-- with frame checksum (FCS)
		vc-multiplexed(3),	-- VC multiplexing
		delete(10)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"This values decides whether frames are send without FCS(1),
		 with FCS(2) or wether VC multiplexing is used."
	    DEFVAL { bridged-no-fcs }
	::= { efmoaPvcEntry 7 }

	efmoaPvcPhysAddress OBJECT-TYPE
	    SYNTAX  PhysAddress
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
	    	"The MAC-Address used for the virtual interface."
	::= { efmoaPvcEntry 8 }
	
END