-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
-- $RCSfile: mibatm2,v $
-- $Revision: 1.32.1.1 $

BIANCA-BRICK-ATM2-MIB DEFINITIONS ::= BEGIN

        IMPORTS
            IpAddress, Counter, Gauge, TimeTicks, enterprises
                FROM RFC1155-SMI

            DisplayString
                FROM RFC1158-MIB
 
	    PhysAddress 
		FROM RFC1213-MIB

            OBJECT-TYPE
                FROM RFC-1212;

    bintec 	OBJECT IDENTIFIER ::= { enterprises 272 }
    bibo	OBJECT IDENTIFIER ::= { bintec 4 }
    atm		OBJECT IDENTIFIER
	::= { bibo 16 }

---
--- ATM Interface Table
---

	atmIfTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF AtmIfEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	    	"The atmIfTable displays all available ATM capable interfaces."
	::= { atm 10 }

	atmIfEntry OBJECT-TYPE
	    SYNTAX  AtmIfEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
		"An interface entry containing objects at the
		subnetwork layer and below for a particular
		interface."
		INDEX { atmIfIndex }
	::= { atmIfTable 1 }

	AtmIfEntry ::=
	    SEQUENCE {
		atmIfIndex  		INTEGER,
		atmIfType 		INTEGER,
		atmIfDescr 		DisplayString,
		atmIfAdminStatus	INTEGER,
		atmIfOperStatus		INTEGER,
		atmIfLastChange		TimeTicks,
		atmIfInPkts		Counter,
		atmIfOutPkts		Counter,
		atmIfRxSpeed 		Gauge,
		atmIfTxSpeed 		Gauge,
		atmIfInOctets		Counter,
		atmIfInDiscards		Counter,
		atmIfInErrors		Counter,
		atmIfOutOctets		Counter,
		atmIfOutDiscards	Counter,
		atmIfOutErrors		Counter,
		atmIfMaxTxRate		INTEGER,
		atmIfOperMode 		INTEGER
	    }

	atmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The interface index of the associated ATM hardware."
	::= { atmIfEntry 1 }
        
	atmIfType OBJECT-TYPE
	    SYNTAX  INTEGER {
		other(1),
		adsl(2),
		shdsl(3),
		vdsl(4)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"This object contains an interface type."
	    DEFVAL { other }
	::= { atmIfEntry 2 }
        
	atmIfDescr OBJECT-TYPE
	    SYNTAX  DisplayString
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"Short description for this object."
	::= { atmIfEntry 3 }
        
	atmIfAdminStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	up(1),
		down(2)
	    }
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"This object contains the desired state of the ATM interface."
	    DEFVAL { up }
	::= { atmIfEntry 4 }
        
	atmIfOperStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	up(1),
		down(2)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	        "The current operational state of the ATM interface."
            DEFVAL { down }
	::= { atmIfEntry 5 }

	atmIfLastChange OBJECT-TYPE
	    SYNTAX  
		    TimeTicks
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The value of sysUpTime at the time the interface entered
		 its current operational state. If the current state was
		 entered prior to the last re-initialization of the local
		 network management subsystem, then this object contains a
		 zero value."
	::= { atmIfEntry 6 }
        
	atmIfMaxTxRate OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
                "This object enables traffic shaping on the related ATM
		 interface. If set to zero (0) there is no shaping active.
		 Otherwise this variable defines the maximum amount of bits
		 per second to be transmitted. Note that the maximum transmit
		 rate is also determined by the capabilities of the ATM
		 hardware."
            DEFVAL { 0 }
	::= { atmIfEntry 7 }

	atmIfOperMode OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	atm(1),
		efm(2)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	        "The current operational mode of the ATM interface.
		The value atm(1) means ATM is used on the line.
		The value efm(2) means ATM is used only internally
		and Ethernet with HDLC framing is used on the line."
            DEFVAL { atm }
	::= { atmIfEntry 8 }

	atmIfInPkts OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of reassembled received packets."
	::= { atmIfEntry 22 }

	atmIfOutPkts OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"This number of transmitted packets."
	::= { atmIfEntry 23 }

	atmIfRxSpeed OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"This object contains the receive interface speed."
	::= { atmIfEntry 24 }

	atmIfTxSpeed OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"This object contains the transmit interface speed."
	::= { atmIfEntry 25 }
        
	atmIfInOctets OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The total number of octets received on the interface,
		 including framing characters."
	::= { atmIfEntry 26 }

	atmIfInDiscards OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of inbound packets which were chosen to be
		 discarded even though no errors had been detected to prevent
		 their being deliverable to a higher-layer protocol. One
		 possible reason for discarding such a packet could be to
		 free up buffer space."
	::= { atmIfEntry 27 }

	atmIfInErrors OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
       	    STATUS  mandatory
     	    DESCRIPTION
		"The number of inbound packets that contained errors preventing
		 them from being deliverable to a higher-layer protocol."
    	::= { atmIfEntry 28 }

	atmIfOutOctets OBJECT-TYPE 
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The total number of octets transmitted out of the interface,
		 including framing characters."
	::= { atmIfEntry 29 }
	
	atmIfOutDiscards OBJECT-TYPE
      	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
     		"The number of outbound packets which were chosen to be
		 discarded even though no errors had been detected to prevent
		 their being transmitted.  One possible reason for discarding
		 such a packet could be to free up buffer space."
	::= { atmIfEntry 30 }

	atmIfOutErrors OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
            DESCRIPTION
		"The number of outbound packets that could not be transmitted
		 because of errors."
	::= { atmIfEntry 31 }

---
--- The Virtual Path Group
--- This group is mandatory for all UNI devices.
--- Information concerning Virtual Path Connections
--- This is the lite version of ATM-FORUM-MIB
---

    	atmVpcTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF AtmVpcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	    	"A table of status and parameter information on the virtual
		 path connections which cross this UNI. There is one entry in
		 this table for each permanent virtual path connection.
	    	 This is the lite version of ATM-FORUM-MIB DEFINITIONS "
	::= { atm 11 } 

	atmVpcEntry OBJECT-TYPE
	    SYNTAX  AtmVpcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	    	"An entry in the table, containing information about a
		 particular virtual path connection."
	    INDEX	 { atmVpcPortIndex, atmVpcVpi } 
	::= { atmVpcTable 1 } 

	AtmVpcEntry ::=
	    SEQUENCE {
		atmVpcPortIndex		INTEGER,
		atmVpcVpi		INTEGER,
		atmVpcOperStatus	INTEGER
	    } 

	atmVpcPortIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The interface index of the associated ATM hardware."
	::= { atmVpcEntry 1 } 

	atmVpcVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Path Connection."
	::= { atmVpcEntry 2 } 

	atmVpcOperStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
		unknown(1),
		end2endUp(2),
		end2endDown(3),
		localUpEnd2endUnknown(4),
		localDown(5)
	    } 
	    ACCESS 		read-only
	    STATUS 		mandatory
	    DESCRIPTION
	    	"The present actual operational status of the VPC. A value of
		 end2endUp(2) or end2endDown(3) would be used if the end-to-end
	    	 status is known. If only local status information is available,
		 a value of localUpEnd2endUnknown(4) or localDown(5) would
		 be used."
            DEFVAL { unknown }
	::= { atmVpcEntry 3 } 


---
--- The Virtual Channel Group
--- This group is mandatory for all UNI devices.
--- Information concerning Virtual Channel Connections
--- This is the lite version of ATM-FORUM-MIB
---

	atmVccTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF AtmVccEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
		"A table of status and parameter information on the virtual
		 channel connections which are visible at this UNI. There is
		 one entry in this table for each permanent virtual channel
		 connection, including reserved VCCs that are supported;
		 e.g., signalling, OAM flows, and ILMI, but not unassigned
		 cells. This is the lite version of ATM-FORUM-MIB DEFINITIONS "
	::= { atm 12 } 

	atmVccEntry OBJECT-TYPE
	    SYNTAX  AtmVccEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
		"An entry in the table, containing information about a
		 particular virtual channel connection."
	    INDEX	 { atmVccPortIndex, atmVccVpi, atmVccVci } 
	::= { atmVccTable 1 } 

	AtmVccEntry ::=
	    SEQUENCE {
		atmVccPortIndex		INTEGER,
		atmVccVpi		INTEGER,
		atmVccVci		INTEGER,
		atmVccOperStatus	INTEGER
	    } 

	atmVccPortIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The interface index of the associated ATM hardware."
	    ::= { atmVccEntry 1 } 

	atmVccVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Channel Connection."
	::= { atmVccEntry 2 } 

	atmVccVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	::= { atmVccEntry 3 } 

	atmVccOperStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
		unknown(1), 
		end2endUp(2), 
		end2endDown(3), 
		localUpEnd2endUnknown(4),
		localDown(5)
	    } 
	    ACCESS 	read-only
	    STATUS 	mandatory
	    DESCRIPTION
	    	"The present actual operational status of the VCC. A value
		 of end2endUp(2) or end2endUp(3) is used if the end-to-end
		 status is known. If only local status is known a value of
		 localUpEnd2endUnknown(4) or localDown(5) is used."
            DEFVAL { unknown }
	::= { atmVccEntry 4 } 

---
--- OAM configuration table
---

	atmOamTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF AtmOamEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	    	"This tables contains all OAM configuration parameters."
	::= { atm 13 }

	atmOamEntry OBJECT-TYPE
	    SYNTAX  AtmOamEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
		""
		INDEX { atmOamAtmIfIndex, atmOamVpi, atmOamVci }
	::= { atmOamTable 1 }

	AtmOamEntry ::=
	    SEQUENCE {
		atmOamAtmIfIndex		INTEGER,
		atmOamVpi			INTEGER,
		atmOamVci			INTEGER,
		atmOamFlowLevel			INTEGER,
		atmOamLoopbackEnd2End		INTEGER,
		atmOamLoopbackSegment		INTEGER,
		atmOamLoopbackEnd2EndInterval	INTEGER,
		atmOamLoopbackSegmentInterval	INTEGER,
		atmOamLoopbackEnd2EndMaxPending	INTEGER,
		atmOamLoopbackSegmentMaxPending	INTEGER,
		atmOamCCEnd2EndActivation	INTEGER,
		atmOamCCSegmentActivation	INTEGER,
		atmOamCCEnd2EndDirection	INTEGER,
		atmOamCCSegmentDirection	INTEGER
	    }

	atmOamAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"The interface index of the associated ATM hardware."
	::= { atmOamEntry 1 }

	atmOamVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Path/Channel Connection."
	    DEFVAL { 8 }
	::= { atmOamEntry 2 }

	atmOamVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	    DEFVAL { 32 }
	::= { atmOamEntry 3 }

	atmOamFlowLevel	OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	f5(1),
	    	f4(2),
                delete(10)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"The OAM hierarchical flow levels : VC (F5) or VP (F4)."
	    DEFVAL { f5 }
	::= { atmOamEntry 4 }

	atmOamLoopbackEnd2End OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	disabled(1),
		enabled(2)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Indicates wether OAM loopback is enabled onto the end-to-end
		 connection."
	    DEFVAL { disabled }
	::= { atmOamEntry 5 }

	atmOamLoopbackSegment OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	disabled(1),
		enabled(2)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Indicates wether active OAM loopback is enabled onto the
		 segment connection."
	    DEFVAL { disabled }
	::= { atmOamEntry 6 }

	atmOamLoopbackEnd2EndInterval OBJECT-TYPE
	    SYNTAX  INTEGER (0..999)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"OAM loopback transmit interval (in seconds) for end-to-end
		 context."
	    DEFVAL { 5 }
	::= { atmOamEntry 7 }

	atmOamLoopbackSegmentInterval OBJECT-TYPE
	    SYNTAX  INTEGER (0..999)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"OAM loopback transmit interval (in seconds) for segment
		 context."
	    DEFVAL { 5 }
	::= { atmOamEntry 8 }

	atmOamLoopbackEnd2EndMaxPending OBJECT-TYPE
	    SYNTAX  INTEGER (0..999)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Specifies the maximum number of outstanding OAM loopback
		 responses after which the associated F4/F5 instance will
		 be set into the end-to-end operational down status."
	    DEFVAL { 5 }
	::= { atmOamEntry 9 }
		
	atmOamLoopbackSegmentMaxPending OBJECT-TYPE
	    SYNTAX  INTEGER (0..999)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Specifies the maximum number of outstanding OAM loopback
		 responses after which the associated F4/F5 instance will
		 be set into the segment operational down status."
	    DEFVAL { 5 }
	::= { atmOamEntry 10 }
		
	atmOamCCEnd2EndActivation OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	passive(1),
		active(2),
		both(3),
		no-negotiation(4),
		none(5)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Determines wether OAM continuity check activation request 
		 will be activated and/or accepted for the associated
		 end-to-end connection.
		 If set to passive(1) or both(3) CC activation requests
		 will be confirmed. If set to active(2) or both CC will
		 be requested. If set to no-negotiation(4) - depending on
		 the settings in atmOamCCEnd2EndDirection - CC cells will
		 be send and/or expected periodically without any previous
		 CC activation negotiation. If set to none(5) neither
		 CC activation will be requested/confirmed nor any CC
		 cells will be generated/expected."
	    DEFVAL { passive }
	::= { atmOamEntry 11 }

	atmOamCCSegmentActivation OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	passive(1),
		active(2),
		both(3),
		no-negotiation(4),
		none(5)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Determines wether OAM continuity check activation request
		 will be activated and/or accepted for the associated
		 segment connection.
		 If set to passive(1) or both(3) CC activation requests
		 will be confirmed. If set to active(2) or both CC will
		 be requested. If set to no-negotiation(4) - depending on
		 the settings in atmOamCCSegmentDirection - CC cells will
		 be send and/or expected periodically without any previous
		 CC activation negotiation. If set to none(5) neither
		 CC activation will be requested/confirmed nor any CC
		 cells will be generated/expected."
	    DEFVAL { passive }
	::= { atmOamEntry 12 }

	atmOamCCEnd2EndDirection OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	sink(1),
		source(2),
		both(3),
		none(4)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Determines OAM continuity check direction (for end-to-end).
		 If set to sink(1) CC cells will be received only, if set to
		 source(2) CC cells will be generated periodically, if set to
		 both(3) CC cells will be received from the source as well
		 as send to the sink."
	    DEFVAL { both }
	::= { atmOamEntry 13 }

	atmOamCCSegmentDirection OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	sink(1),
		source(2),
		both(3),
		none(4)
	    }    
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"Determines OAM continuity check direction (for segment).
		 If set to sink(1) CC cells will be received only, if set to
		 source(2) CC cells will be generated periodically, if set to
		 both(3) CC cells will be received from the source as well
		 as send to the sink."
	    DEFVAL { both }
	::= { atmOamEntry 14 }


---
--- OAM statistics table
---

	atmOamStatTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF AtmOamStatEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	        "This tables displays all used VCs."
	::= { atm 14 }

	atmOamStatEntry OBJECT-TYPE
	    SYNTAX  AtmOamStatEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
		""
        INDEX { atmOamStatAtmIfIndex, atmOamStatVpi, atmOamStatVci }
	::= { atmOamStatTable 1 }

	AtmOamStatEntry ::=
	    SEQUENCE {
		atmOamStatAtmIfIndex		INTEGER,
		atmOamStatVpi          		INTEGER,
		atmOamStatVci          		INTEGER,
		atmOamStatFlowType         	INTEGER,
		atmOamStatLoopbackTxCells	Counter,
		atmOamStatLoopbackRxCells	Counter,
		atmOamStatLoopbackPending	Counter,
		atmOamStatLoopbackCorr		INTEGER,
		atmOamStatAisState		INTEGER,
		atmOamStatAisTxCells		Counter,
		atmOamStatAisRxCells		Counter,
		atmOamStatTotalAisTxCells	Counter,
		atmOamStatTotalAisRxCells	Counter,
		atmOamStatRdiState		INTEGER,
		atmOamStatRdiTxCells		Counter,
		atmOamStatRdiRxCells		Counter,
		atmOamStatTotalRdiTxCells	Counter,
		atmOamStatTotalRdiRxCells	Counter,
		atmOamStatCCActivatorState	INTEGER,
		atmOamStatCCActivatorDirection	INTEGER,
		atmOamStatCCActivatorCorr	INTEGER,
		atmOamStatCCResponderState	INTEGER,
		atmOamStatCCResponderDirection	INTEGER,
		atmOamStatCCResponderCorr	INTEGER,
		atmOamStatCCTxCells		Counter,
		atmOamStatCCRxCells		Counter
	    }

	atmOamStatAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The interface index of the associated ATM hardware."
	::= { atmOamStatEntry 1 }

	atmOamStatVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Path Connection."
	::= { atmOamStatEntry 2 }

	atmOamStatVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	::= { atmOamStatEntry 3 }
	
	atmOamStatFlowType OBJECT-TYPE
	    SYNTAX  INTEGER {
		f5-segment(1),
		f5-end2end(2),
		f4-segment(3),
		f4-end2end(4)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The OAM hierarchical flow levels: see ITU I.610"
	    DEFVAL { f5-end2end }
	::= { atmOamStatEntry 4 }
	
	atmOamStatLoopbackTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM loopback cells that have been sent 
 	         to the target in this sequence."
	::= { atmOamStatEntry 6 }

	atmOamStatLoopbackRxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM loopback cells that have been received 
 	         from the target in this sequence."
	::= { atmOamStatEntry 7 }

	atmOamStatLoopbackPending OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of currently outstanding OAM loopback responses."
	::= { atmOamStatEntry 8 }

	atmOamStatLoopbackCorr OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The correlation of the last sent loopback message."
	::= { atmOamStatEntry 9 }

	atmOamStatAisState OBJECT-TYPE
	    SYNTAX  INTEGER  { off(1), on(2) }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The AIS state is set to on(2) after receiving an AIS cell
		 or detection of LOC (Loss of Continuity). The Ais state is
		 set to off(1) either when receiving user cells
		 (same VCC context) or via timeout."
	    DEFVAL { off }
	::= { atmOamStatEntry 10 }

	atmOamStatAisTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM alarm indication signal (AIS) cells   
 	         that have been transmitted since last change of AisState."
	::= { atmOamStatEntry 11 }

	atmOamStatAisRxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM alarm indication signal (AIS) cells   
 	         that have been received since last change of AisState."
	::= { atmOamStatEntry 12 }

	atmOamStatTotalAisTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The total number of OAM alarm indication signal (AIS) cells   
 	         that have been transmitted."
	::= { atmOamStatEntry 13 }

	atmOamStatTotalAisRxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The total number of OAM alarm indication signal (AIS) cells   
 	         that have been received."
	::= { atmOamStatEntry 14 }

	atmOamStatRdiState OBJECT-TYPE
	    SYNTAX  INTEGER  { off(1), on(2) }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The RDI state is set to on(2) after receiving a RDI cell.
		 The RDI state is to off(1) via timeout."
	    DEFVAL { off }
	::= { atmOamStatEntry 15 }

	atmOamStatRdiTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM remote defect indication (RDI) cells 
 	         that have been transmitted since last change of RdiState."
	::= { atmOamStatEntry 16 }

	atmOamStatRdiRxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM remote defect indication (RDI) cells 
 	         that have been received since last change of RdiState."
	::= { atmOamStatEntry 17 }

	atmOamStatTotalRdiTxCells OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The totoal number of OAM remote defect indication (RDI) cells 
 	         that have been transmitted."
	::= { atmOamStatEntry 18 }

	atmOamStatTotalRdiRxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The total number of OAM remote defect indication (RDI) cells 
 	         that have been received."
	::= { atmOamStatEntry 19 }

	atmOamStatCCActivatorState OBJECT-TYPE
	    SYNTAX  INTEGER {
		inactive(1),
		wait-act-con(2),
		active(3),
		wait-deact-con(4)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The status of the initiated CC negotiation, inactive(1)
		 is the initial status, wait-act-con(2) is set after
		 sending an CC activation request, active(3) is reached
		 after receiving the CC activation confirmation whereas
		 wait-deact-con(4) is used to indicate awaiting the
		 CC deactivation confirmation."
            DEFVAL { inactive }
	::= { atmOamStatEntry 20 }

	atmOamStatCCActivatorDirection OBJECT-TYPE
	    SYNTAX  INTEGER {
		sink(1),
		source(2),
		both(3),
		not-applicable(4)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The direction of action indicated by a received CC activation
		 confirmation, source(1) correlates with 'A-B', sink(2) with
		 'B-A' and both(3) with 'A-B' and 'B-A'."
            DEFVAL { not-applicable }
	::= { atmOamStatEntry 21 }

	atmOamStatCCActivatorCorr OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The correlation of the last CC activation message sent
		 to the responder."
	::= { atmOamStatEntry 22 }

	atmOamStatCCResponderState OBJECT-TYPE
	    SYNTAX  INTEGER {
		inactive(1),
		active(3),
		wait-deact-con(4)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The status of the passive CC negotiation, inactive(1)
		 is the initial status, active(3) is reached after receiving
		 an CC activation request whereas wait-deact-con(4) is used
		 to indicate awaiting the CC deactivation confirmation."
            DEFVAL { inactive }
	::= { atmOamStatEntry 23 }

	atmOamStatCCResponderDirection OBJECT-TYPE
	    SYNTAX  INTEGER {
		source(1),
		sink(2),
		both(3),
		not-applicable(4)
	    }
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The direction of action indicated by a received CC activation
		 request, source(1) correlates with 'B-A', sink(2) with
		 'A-B' and both(3) with 'A-B' and 'B-A'."
            DEFVAL { not-applicable }
	::= { atmOamStatEntry 24 }

	atmOamStatCCResponderCorr OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The correlation of the received CC activation message."
	::= { atmOamStatEntry 25 }

	atmOamStatCCTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM continuity check cells
 	         that have been sent to the target in this sequence."
	::= { atmOamStatEntry 26 }

	atmOamStatCCRxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
		"The number of OAM continuity check cells
 	         that have been received from the target in this sequence."
	::= { atmOamStatEntry 27 }


---
--- Ethernet over ATM (LAN emulation) PVC table
---

	ethoaPvcTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF EthoaPvcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	        "The ethoaPvcTable displays all virtual ethernets defined for
		 a VCI/VPI on a specified hardware."
	::= { atm 15 }


	ethoaPvcEntry OBJECT-TYPE
	    SYNTAX  EthoaPvcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory

	    DESCRIPTION
		""
	    INDEX { ethoaPvcVpi, ethoaPvcVci, ethoaPvcAtmIfIndex }
	::= { ethoaPvcTable 1 }

	EthoaPvcEntry ::=
	    SEQUENCE {
		ethoaPvcIfIndex  		INTEGER,
		ethoaPvcDescr			DisplayString,
		ethoaPvcAtmIfIndex		INTEGER,
		ethoaPvcVpi			INTEGER,
		ethoaPvcVci			INTEGER,
		ethoaPvcEncapsulation		INTEGER,
		ethoaPvcPhysAddress		PhysAddress
	    }

	ethoaPvcIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	        "This object contains an interface index and assigns the
                 row to an entry in ifTable. When creating new entries
                 in the table, the value of this object shall be set to 0.
                 The next free ifIndex value is than allocated and assigned
		 to the object. At the same time a new interface is created
		 in the IfTable."
            DEFVAL { 0 }
	::= { ethoaPvcEntry 1 }

        ethoaPvcDescr OBJECT-TYPE
            SYNTAX  DisplayString
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "Short description of the configured PVC"
        ::= { ethoaPvcEntry 2 }
                

	ethoaPvcAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"The Index to the ATM hardware."
	::= { ethoaPvcEntry 3 }

	ethoaPvcVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Path Connection."
	    DEFVAL { 8 }
	::= { ethoaPvcEntry 4 }

	ethoaPvcVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	    DEFVAL { 32 }
	::= { ethoaPvcEntry 5 }
	
	ethoaPvcEncapsulation OBJECT-TYPE
	    SYNTAX  INTEGER {
		bridged-no-fcs(1),	-- without frame checksum (FCS
		bridged-fcs(2),		-- with frame checksum (FCS)
		vc-multiplexed(3),	-- VC multiplexing
		delete(10)
	    }
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"This values decides whether frames are send without FCS(1),
		 with FCS(2) or wether VC multiplexing is used."
	    DEFVAL { bridged-no-fcs }
	::= { ethoaPvcEntry 6 }

	ethoaPvcPhysAddress OBJECT-TYPE
	    SYNTAX  PhysAddress
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The MAC-Address used for the virtual interface."
	::= { ethoaPvcEntry 7 }
	

---
--- raw protocol Pvc table
---

	rpoaPvcTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF RpoaPvcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	        "This table configures Vpi/Vci for raw protocols
		 (IP, IPX, etc.)"
	::= { atm 16 }

	rpoaPvcEntry OBJECT-TYPE
	    SYNTAX  RpoaPvcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory

	    DESCRIPTION
		""
	    INDEX { rpoaPvcVpi, rpoaPvcVci, rpoaPvcAtmIfIndex }
	::= { rpoaPvcTable 1 }

	RpoaPvcEntry ::=
	    SEQUENCE {
		rpoaPvcIfIndex  		INTEGER,
		rpoaPvcDescr			DisplayString,
		rpoaPvcAtmIfIndex		INTEGER,
		rpoaPvcVpi			INTEGER,
		rpoaPvcVci			INTEGER,
		rpoaPvcEncapsulation		INTEGER

	    }

	rpoaPvcIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	        "This object contains an interface index and assigns the
                 row to an entry in ifTable. When creating new entries
                 in the table, the value of this object shall be set to 0.
                 The next free ifIndex value is than allocated and assigned
		 to the object. At the same time a new interface is created
		 in the IfTable."
            DEFVAL { 0 }
	::= { rpoaPvcEntry 1 }

        rpoaPvcDescr OBJECT-TYPE
            SYNTAX  DisplayString
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "Short description of the configured PVC"
        ::= { rpoaPvcEntry 2 }

	rpoaPvcAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"The Index to the ATM hardware."
	::= { rpoaPvcEntry 3 }

	rpoaPvcVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Path Connection."
	    DEFVAL { 8 }
	::= { rpoaPvcEntry 4 }

	rpoaPvcVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	    DEFVAL { 32 }
	::= { rpoaPvcEntry 5 }
	
	rpoaPvcEncapsulation OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	non-iso(1),
		iso(2),
		vc-multiplexed(3),
		delete(10)
	    }
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"This values decides whether frames are send codes
		 with LLC 0xAA 0xAA (non-ISO), LLC 0xFE 0xFE (ISO)
		 or wether VC multiplexing is used."
	    DEFVAL { non-iso }
	::= { rpoaPvcEntry 6 }


---
--- pppoa Pvc Table
---

	pppoaPvcTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF PppoaPvcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory
	    DESCRIPTION
	        "This table configures Vpi/Vci for PPP oaver AAL5 (PPPoA)
		 permanent and on-demand sessions."

	::= { atm 17 }

	pppoaPvcEntry OBJECT-TYPE
	    SYNTAX  PppoaPvcEntry
	    ACCESS  not-accessible
	    STATUS  mandatory

	    DESCRIPTION
		""
	    INDEX { pppoaPvcVpi, pppoaPvcVci, pppoaPvcAtmIfIndex }
	::= { pppoaPvcTable 1 }

	PppoaPvcEntry ::=
	    SEQUENCE {
		pppoaPvcIfIndex  		INTEGER,
		pppoaPvcDescr			DisplayString,
		pppoaPvcAtmIfIndex		INTEGER,
		pppoaPvcVpi			INTEGER,
		pppoaPvcVci			INTEGER,
		pppoaPvcEncapsulation		INTEGER,
		pppoaPvcClientType		INTEGER

	    }

	pppoaPvcIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	        "This object contains an interface index and refers to an
		 entry in ifTable. When creating new entries in the table,
                 the next free ifIndex value is than allocated and assigned
		 to the object. At the same time a new interface is created
		 in the IfTable with that very index."
            DEFVAL { 0 }
	::= { pppoaPvcEntry 1 }

        pppoaPvcDescr OBJECT-TYPE
            SYNTAX  DisplayString
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "Short description of the configured PVC"
        ::= { pppoaPvcEntry 2 }


	pppoaPvcAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"The Index to the ATM hardware."
	::= { pppoaPvcEntry 3 }

	pppoaPvcVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Path Connection."
	    DEFVAL { 8 }
	::= { pppoaPvcEntry 4 }

	pppoaPvcVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	    DEFVAL { 32 }
	::= { pppoaPvcEntry 5 }
	
	pppoaPvcEncapsulation OBJECT-TYPE
            SYNTAX  INTEGER {
                vc-multiplexed(1),
                llc(2),
                delete(10)
            }   
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"This value decides whether VC multiplexing or 
		 LLC encapsulation is used."
	    DEFVAL { vc-multiplexed }
	::= { pppoaPvcEntry 6 }
	
	pppoaPvcClientType OBJECT-TYPE
            SYNTAX  INTEGER {
                permanent(1),
                on-demand(2)
            }   
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"This variable defines whether the PPP over AAL5 session
		 will be established permanent(1) or initiated on-demand(2)."
	    DEFVAL { on-demand }
	::= { pppoaPvcEntry 7 }


--- VC-related ATM QoS (ATM service categories)

        atmQosVccTable OBJECT-TYPE
            SYNTAX  SEQUENCE OF AtmQosVccEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
            	"This table provides QoS information for each active ATM VC on
	     	 the related ATM interface"
        ::= { atm 19 }

        atmQosVccEntry OBJECT-TYPE
            SYNTAX  AtmQosVccEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
            	"An entry in the table, containing ATM QoS parameters about a
	     	 particular virtual connection."
            INDEX        { atmQosVccAtmIfIndex, atmQosVccVpi, atmQosVccVci }
        ::= { atmQosVccTable 1 }

        AtmQosVccEntry ::=
            SEQUENCE {
                atmQosVccAtmIfIndex	INTEGER,
                atmQosVccVpi		INTEGER,
                atmQosVccVci		INTEGER,
		atmQosVccService	INTEGER,
		atmQosVccOutPcr		INTEGER,
		atmQosVccOutScr		INTEGER,	
		atmQosVccOutMbs		INTEGER,
		atmQosVccOutMcr		INTEGER
            }

	atmQosVccAtmIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
		"The interface index of the associated ATM hardware."
	::= { atmQosVccEntry 1 }

	atmQosVccVpi OBJECT-TYPE
	    SYNTAX  INTEGER (0..255)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VPI value of this Virtual Channel Connection."
	::= { atmQosVccEntry 2 }

	atmQosVccVci OBJECT-TYPE
	    SYNTAX  INTEGER (0..65535)
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The VCI value of this Virtual Channel Connection."
	::= { atmQosVccEntry 3 }

	atmQosVccService OBJECT-TYPE
	    SYNTAX  INTEGER {	-- ATM Forum UNI 4.0
	    	cbr(1),
		vbr(2),
--		vbr2(3),
		vbr3(4),
--		vbr-rt(5),
--		vbr2-rt(6),
--		vbr3-rt(7),
		ubr(8),
--		ubr2(9),
--		abr(10),
		delete(20)
	    }
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"The ATM service category of this virtual circuit connection:
		    cbr
		    vbr
		    vbr2
		    vbr3	VBR1 + Best Effort 
		    vbr-rt	real-time
		    vbr2-rt	real-time
		    vbr3-rt	real-time
		    ubr		Best Effort
		    ubr2	Best Effort
		    abr
		    delete
		"
	    DEFVAL { ubr }
	::= { atmQosVccEntry 4 }

	atmQosVccOutPcr OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"Output Peak Cell Rate (PCR) in bps."
	::= { atmQosVccEntry 5 }

	atmQosVccOutScr OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"Output Sustained Cell Rate (SCR) in bps."
	::= { atmQosVccEntry 6 }

	atmQosVccOutMbs OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"Output Maximum Burst Size (MBS) in Bytes, only for
		 atmQosVccService vbr-rt(2) and vbr-nrt(3) (ATM service
		 service category VBR)."
	::= { atmQosVccEntry 7 }

	atmQosVccOutMcr OBJECT-TYPE
	    SYNTAX  INTEGER 
	    ACCESS  read-write
	    STATUS  mandatory
	    DESCRIPTION
	    	"Output Minimum Cell Rate (MCR) in bps for connection with
		 vbr-nrt(3)."
	::= { atmQosVccEntry 8 }

---
--- ATM ATUR Performance Data Table
---

    atmAturPerfDataTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF AtmAturPerfDataEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION 
	    ""
	::= { atm 20 }

    atmAturPerfDataEntry OBJECT-TYPE
	SYNTAX      AtmAturPerfDataEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION 
	    "An entry in atmAturPerfDataTable."
	INDEX       { atmAturPerfIfIndex }
	::= { atmAturPerfDataTable 1 }

    AtmAturPerfDataEntry ::= SEQUENCE {
	atmAturPerfIfIndex                 INTEGER,
	atmAturPerfIdleCells               INTEGER,
	atmAturPerfDataCells               INTEGER,
	atmAturPerfLcds                    INTEGER,
	atmAturPerfHecs                    INTEGER,
	atmAturPerfCurr15MinTimeElapsed    INTEGER,
	atmAturPerfCurr15MinIdleCells      INTEGER,
	atmAturPerfCurr15MinDataCells      INTEGER,
	atmAturPerfCurr15MinLcds           INTEGER,
	atmAturPerfCurr15MinHecs           INTEGER,
	atmAturPerfCurr1DayTimeElapsed     INTEGER,
	atmAturPerfCurr1DayIdleCells       INTEGER,
	atmAturPerfCurr1DayDataCells       INTEGER,
	atmAturPerfCurr1DayLcds            INTEGER,
	atmAturPerfCurr1DayHecs            INTEGER,
	atmAturPerfPrev1DayIdleCells       INTEGER,
	atmAturPerfPrev1DayDataCells       INTEGER,
	atmAturPerfPrev1DayLcds            INTEGER,
	atmAturPerfPrev1DayHecs            INTEGER
	}
	
    atmAturPerfIfIndex OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Specifies the ATM interface index."
	::= { atmAturPerfDataEntry 1 }
	
    atmAturPerfIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM idle cells."
	::= { atmAturPerfDataEntry 2 }

    atmAturPerfDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM data cells."
	::= { atmAturPerfDataEntry 3 }

   atmAturPerfLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
 	    "Count of the number of Loss of Cell Delineation failures since
	    agent reset."
	::= { atmAturPerfDataEntry 4 }

    atmAturPerfHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
 	    "Count of the number of Header Error Check failures since
	     agent reset."
	::= { atmAturPerfDataEntry 5 }
    
    atmAturPerfCurr15MinTimeElapsed OBJECT-TYPE
	SYNTAX      INTEGER (0..899)
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Total elapsed seconds in this interval."
	::= { atmAturPerfDataEntry 11 }
    
    atmAturPerfCurr15MinIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM idle cells in the mandatory 15 minute interval."
	::= { atmAturPerfDataEntry 12 }

    atmAturPerfCurr15MinDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM data cells in the mandatory 15 minute interval."
	::= { atmAturPerfDataEntry 13 }

    atmAturPerfCurr15MinLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of seconds in the mandatory 15 minute interval
	     when there was Loss of Cell Delineation."
	::= { atmAturPerfDataEntry 14 }

    atmAturPerfCurr15MinHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of seconds in the mandatory 15 minute interval
	     when there was Header Error Check failures."
	::= { atmAturPerfDataEntry 15 }

    atmAturPerfCurr1DayTimeElapsed OBJECT-TYPE
	SYNTAX      INTEGER (0..86399)
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Number of seconds that have elapsed since the
	     beginning of the mandatory 1-day interval."
	::= { atmAturPerfDataEntry 18 }

    atmAturPerfCurr1DayIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM idle cells during the mandatory day as measured
	     by atmAturPerfCurr1DayTimeElapsed."
	::= { atmAturPerfDataEntry 19 }
	    
    atmAturPerfCurr1DayDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM data cells during the mandatory day as measured
	     by atmAturPerfCurr1DayTimeElapsed."
	::= { atmAturPerfDataEntry 20 }

    atmAturPerfCurr1DayLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of the number of seconds when there was Loss
	     of Cell Delineation during the mandatory day as measured
	     by atmAturPerfCurr1DayTimeElapsed."
	::= { atmAturPerfDataEntry 21 }

    atmAturPerfCurr1DayHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of the number of seconds when there was Header
	     Error Check failures during the mandatory day as measured
	     by atmAturPerfCurr1DayTimeElapsed."
	::= { atmAturPerfDataEntry 22 }

    atmAturPerfPrev1DayIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "The number of ATM idle cells within the most recent previous
	     1-day period."
	::= { atmAturPerfDataEntry 26 }

    atmAturPerfPrev1DayDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "The number of ATM data cells within the most recent previous
	     1-day period."
	::= { atmAturPerfDataEntry 27 }

    atmAturPerfPrev1DayLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Count of seconds in the interval when there was
	     Loss of Cell Delineation within the most recent previous
	     1-day period."
	::= { atmAturPerfDataEntry 28 }

    atmAturPerfPrev1DayHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Count of seconds in the interval when there was
 	     Header Error Check within the most recent previous
	     1-day period."
	::= { atmAturPerfDataEntry 29 }

---
--- ATM ATUC Performance Data Table
---

    atmAtucPerfDataTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF AtmAtucPerfDataEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION 
	    ""
	::= { atm 21 }

    atmAtucPerfDataEntry OBJECT-TYPE
	SYNTAX      AtmAtucPerfDataEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION 
	    "An entry in atmAtucPerfDataTable."
	INDEX       { atmAtucPerfIfIndex }
	::= { atmAtucPerfDataTable 1 }

    AtmAtucPerfDataEntry ::= SEQUENCE {
	atmAtucPerfIfIndex                 INTEGER,
	atmAtucPerfIdleCells               INTEGER,
	atmAtucPerfDataCells               INTEGER,
	atmAtucPerfLcds                    INTEGER,
	atmAtucPerfHecs                    INTEGER,
	atmAtucPerfCurr15MinTimeElapsed    INTEGER,
	atmAtucPerfCurr15MinIdleCells      INTEGER,
	atmAtucPerfCurr15MinDataCells      INTEGER,
	atmAtucPerfCurr15MinLcds           INTEGER,
	atmAtucPerfCurr15MinHecs           INTEGER,
	atmAtucPerfCurr1DayTimeElapsed     INTEGER,
	atmAtucPerfCurr1DayIdleCells       INTEGER,
	atmAtucPerfCurr1DayDataCells       INTEGER,
	atmAtucPerfCurr1DayLcds            INTEGER,
	atmAtucPerfCurr1DayHecs            INTEGER,
	atmAtucPerfPrev1DayIdleCells       INTEGER,
	atmAtucPerfPrev1DayDataCells       INTEGER,
	atmAtucPerfPrev1DayLcds            INTEGER,
	atmAtucPerfPrev1DayHecs            INTEGER
	}
	
    atmAtucPerfIfIndex OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Specifies the ATM interface index."
	::= { atmAtucPerfDataEntry 1 }
	
    atmAtucPerfIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM idle cells."
	::= { atmAtucPerfDataEntry 2 }

    atmAtucPerfDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM data cells."
	::= { atmAtucPerfDataEntry 3 }

   atmAtucPerfLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
 	    "Count of the number of Loss of Cell Delineation failures since
	    agent reset."
	::= { atmAtucPerfDataEntry 4 }

    atmAtucPerfHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
 	    "Count of the number of Header Error Check failures since
	     agent reset."
	::= { atmAtucPerfDataEntry 5 }

    atmAtucPerfCurr15MinTimeElapsed OBJECT-TYPE
	SYNTAX      INTEGER (0..899)
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Total elapsed seconds in this interval."
	::= { atmAtucPerfDataEntry 11 }
    
    atmAtucPerfCurr15MinIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM idle cells in the mandatory 15 minute interval."
	::= { atmAtucPerfDataEntry 12 }

    atmAtucPerfCurr15MinDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM data cells in the mandatory 15 minute interval."
	::= { atmAtucPerfDataEntry 13 }

    atmAtucPerfCurr15MinLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of seconds in the mandatory 15 minute interval
	     when there was Loss of Cell Delineation."
	::= { atmAtucPerfDataEntry 14 }

    atmAtucPerfCurr15MinHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of seconds in the mandatory 15 minute interval
	     when there was Header Error Check failures."
	::= { atmAtucPerfDataEntry 15 }
    
    atmAtucPerfCurr1DayTimeElapsed OBJECT-TYPE
	SYNTAX      INTEGER (0..86399)
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Number of seconds that have elapsed since the
	     beginning of the mandatory 1-day interval."
	::= { atmAtucPerfDataEntry 18 }

    atmAtucPerfCurr1DayIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM idle cells during the mandatory day as measured
	     by atmAtucPerfCurr1DayTimeElapsed."
	::= { atmAtucPerfDataEntry 19 }
	    
    atmAtucPerfCurr1DayDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "The number of ATM data cells during the mandatory day as measured
	     by atmAtucPerfCurr1DayTimeElapsed."
	::= { atmAtucPerfDataEntry 20 }

    atmAtucPerfCurr1DayLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of the number of seconds when there was Loss
	     of Cell Delineation during the mandatory day as measured
	     by atmAtucPerfCurr1DayTimeElapsed."
	::= { atmAtucPerfDataEntry 21 }

    atmAtucPerfCurr1DayHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION
	    "Count of the number of seconds when there was Header
	     Error Check failures during the mandatory day as measured
	     by atmAtucPerfCurr1DayTimeElapsed."
	::= { atmAtucPerfDataEntry 22 }

    atmAtucPerfPrev1DayIdleCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "The number of ATM idle cells within the most recent previous
	     1-day period."
	::= { atmAtucPerfDataEntry 26 }

    atmAtucPerfPrev1DayDataCells OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "The number of ATM data cells within the most recent previous
	     1-day period."
	::= { atmAtucPerfDataEntry 27 }

    atmAtucPerfPrev1DayLcds OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Count of seconds in the interval when there was
	     Loss of Cell Delineation within the most recent previous
	     1-day period."
	::= { atmAtucPerfDataEntry 28 }

    atmAtucPerfPrev1DayHecs OBJECT-TYPE
	SYNTAX      INTEGER
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION 
	    "Count of seconds in the interval when there was
	     Header Error Check within the most recent previous
	     1-day period."
	::= { atmAtucPerfDataEntry 29 }

END