-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
-- $Revision: 1.16 $ 

BIANCA-BRICK-ALIVE-MIB DEFINITIONS ::= BEGIN


	IMPORTS
	    NetworkAddress, IpAddress, Counter, Gauge, TimeTicks,
	    enterprises
		FROM RFC1155-SMI

            Date, HexValue
                FROM BINTEC-MIB

	    OBJECT-TYPE
		FROM RFC-1212;


	--  MIB-II (same prefix as MIB-I)
	bintec 		OBJECT IDENTIFIER ::= { enterprises 272 }
	bibo		OBJECT IDENTIFIER ::= { bintec 4 }
	alive		OBJECT IDENTIFIER 
	::= { bibo 36 }

    -- Alive Group

    -- Management Information for alive surveillance on BIANCA/BRICK


        aliveTable OBJECT-TYPE
            SYNTAX  SEQUENCE OF AliveEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
		"The aliveTable contains entries defining any kind of
		 surveillance. It is a more general version of
		 ipHostsAliveTable that only deals with reachability of hosts
		 via ICMP messages. Additionally interfaces can now be
		 monitored, further extensions are possible in future."
	::= { alive 1 }

	aliveEntry OBJECT-TYPE
            SYNTAX  AliveEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
		""
	    INDEX   { aliveIfIndex }
              ::= { aliveTable 1 }

	AliveEntry ::=
            SEQUENCE {
		aliveSurveillance		INTEGER,
                aliveIfIndex 			INTEGER,
		aliveState			INTEGER,
		aliveTrigger			INTEGER,
		aliveAction			INTEGER,
		aliveFirstIfIndex		INTEGER,
		aliveIfIndexRange		INTEGER,
		aliveTaskId			INTEGER,
		aliveMasterProto		INTEGER,
		aliveMasterVrId			INTEGER,
		aliveMasterBrrpState		INTEGER,
		aliveSlaveProto			INTEGER,
		aliveSlaveVrId			INTEGER,
		aliveSlaveBrrpState		INTEGER,
		aliveSlaveBrrpDecrPrio	INTEGER
            }

	aliveSurveillance OBJECT-TYPE
            SYNTAX  INTEGER {
		interface(1),
		ping(2),
		brrp(3)
	    }
            ACCESS  read-write
            STATUS  mandatory

            DESCRIPTION
                "Specifies what kind of event may trigger an alive entry.
		 Being a generalisation of MIB table ipHostsAliveTable the
		 latter table may be replaced by it.  Possible values are:

		 o interface - the interface operation status is monitored.
		 o ping - the reachablity is monitored via ICMP echo requests.
		 o brrp - monitoring via the Bintec Router Redundancy Protocol
		          which is a derivate of the popular VRRP (RFC 2338).

		 The default value is interface.
		"
	    DEFVAL { interface }
	::= { aliveEntry 1 }

	aliveIfIndex OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-write
            STATUS  mandatory

            DESCRIPTION
                "The index of interface to monitor the operation status.
		 Like referenced in the ifTable.
		 Applicable for surveillance mode 'interface'.
		"
	::= { aliveEntry 2 }

	aliveState OBJECT-TYPE
	    SYNTAX  INTEGER {
		      up(1),
		      down(2),
		      unknown(3)
		    }
	    ACCESS  read-only
	    STATUS  mandatory
            DESCRIPTION
		"The state of the watched entity.
		 Possible values are 'unknown', 'up' or 'down'.
		 This value is not used for surveillance mode 'brrp'.

		 The default value is 'unknown'.
		"
            DEFVAL { unknown }
	::= { aliveEntry 3 }

	aliveTrigger OBJECT-TYPE
	    SYNTAX  INTEGER {
		      up(1),
		      down(2)
		    }
	    ACCESS  read-write
	    STATUS  mandatory
            DESCRIPTION
		"The variable trigger defines on change to what state
		 (depending on the surveillance mode) the defined action
		 is performed.
		 Possible values are 'up' or 'down'.
		"
	    DEFVAL { up }
	::= { aliveEntry 4 }

	aliveAction OBJECT-TYPE
	    SYNTAX  INTEGER {
		      up(1),
		      down(2),
		      none(4),
		      delete(255)
		    }
	    ACCESS  read-write
	    STATUS  mandatory
            DESCRIPTION
		"This action is performed upon status change of the
		 respective entity to the given trigger condition.
		 Possible actions are 'up', 'down' or 'none'.

		 The default value is 'none'.
		"
            DEFVAL { none }
	::= { aliveEntry 5 }

	aliveFirstIfIndex OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The first interface index affected by the action.
		 This value is not used for surveillance mode 'brrp'.
		"
	::= { aliveEntry 6 }

	aliveIfIndexRange OBJECT-TYPE
	    SYNTAX  INTEGER
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"A range of interface indexes affected by the action
		 counted from aliveFirstIfIndex. Value '0' means that
		 only interface aliveFirstIfIndex is affected.
		 This value is not used for surveillance mode 'brrp'.

		 The default value is 0.
		"
	    DEFVAL { 0 }
	::= { aliveEntry 7 }

	aliveTaskId OBJECT-TYPE
	    SYNTAX  INTEGER (1..255)
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The id of the task definition used exclusively for
		 table sorting purposes (multiple instances are possible).

		 The default value is 1.
		"
	    DEFVAL { 1 }
	::= { aliveEntry 8 }

	aliveMasterProto OBJECT-TYPE
	    SYNTAX  INTEGER {
		      brrp(1),
		      ifstat(2),
		      ping(3)
		    }
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The protocol used for interface keepalive monitoring.
		 Possible values are:

		 o brrp - monitoring via the Bintec Router Redundancy Protocol
		          which is a derivate of the popular VRRP (RFC 2338).
		 o ifstat - the interface operation status is monitored.
		 o ping - the reachablity is monitored via ICMP echo requests.

		 The default value is 'brrp'.
		"
	    DEFVAL { brrp }
	::= { aliveEntry 9 }

	aliveMasterVrId OBJECT-TYPE
	    SYNTAX  INTEGER (1..255)
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The id of the virtual router used for monitoring
		 the interface.  The associated BRRP configuration
		 is stored in the biboBrrpOperTable.
		"
	    DEFVAL { 1 }
	::= { aliveEntry 10 }

	aliveMasterBrrpState OBJECT-TYPE
	    SYNTAX  INTEGER {
		      initialize(1),
		      backup(2),
		      master(3),
		      any(4)
		    }
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The operation state of the virtual router which triggers
		 the specified action on the slave BRRP virtual router.
		 The states 'initialize', 'backup' and 'master' are
		 identical to the definition from RFC 2338.

		 The special state 'any' should be used in conjunction with
		 aliveSlaveBrrpState_sync for a synchronized operation of
		 the MASTER and BACKUP virtual router.

		 The default value is 'any'.
		"
	    DEFVAL { any }
	::= { aliveEntry 11 }

	aliveSlaveProto OBJECT-TYPE
	    SYNTAX  INTEGER {
		brrp(1),
		ifstat(2),
		ping(3)
	    }
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The protocol used for the slave (or backup) interface
		 (or virtual router) keepalive operation status switching.

		 o brrp - monitoring via the Bintec Router Redundancy Protocol
		          which is a derivate of the popular VRRP (RFC 2338).
		 o ifstat - the interface operation status is monitored.
		 o ping - the reachablity is monitored via ICMP echo requests.

		 The default value is 'brrp'.
		"
	    DEFVAL { brrp }
	::= { aliveEntry 12 }

	aliveSlaveVrId OBJECT-TYPE
	    SYNTAX  INTEGER (1..255)
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The virtual router id used for interface admin status
		 switching.  The associated BRRP configuration is stored
		 in the biboBrrpOperTable.
		"
	    DEFVAL { 1 }
	::= { aliveEntry 13 }

	aliveSlaveBrrpState OBJECT-TYPE
	    SYNTAX  INTEGER {
		      down(1),
		      up(2),
		      sync(3),
		      decrPrio(4)
		    }
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"The admin state of the virtual router controlling the
		 slave interface.

		 down(1) -- the virtual routes enters the initialize state
		 up(2)   -- the virtual router switches to the backup or
		            master state according to the basic configuration
		            found in the biboBrrpOperTable.
		 sync(3) -- the virtual router tries to enter the same actual
		            state as the master. If this is impossible both
		            (master and slave) enter the initalize state.
		 decrPrio(4) -- the virtual router stays in the 'up' state,
		            but its VRRP priority is decremented by 
		            'aliveSlaveBrrpDecrPrio' (see biboBrrpOperPriority
		            and biboBrrpOperDecrPrio to know the 'real' priority)

		 The default value is 'sync'.
		"
	    DEFVAL { sync }
	::= { aliveEntry 14 }

	aliveSlaveBrrpDecrPrio OBJECT-TYPE
	    SYNTAX  INTEGER (1..254)
	    ACCESS  read-write
	    STATUS  mandatory

	    DESCRIPTION
		"This value is used to decrement 'biboBrrpOperPriority' when
		 virtual router state switches from 'up' to 'decrPrio'
		 (see 'aliveSlaveBrrpState')

		 It is used again to increment 'biboBrrpOperPriority' when
		 the virtual router state switches from 'decrPrio' to 'up'
		 (see 'aliveSlaveBrrpState')

		 If this value changes while router is in state decrPrio, the
		 old value is internally stored so that the correct inverse
		 operation can be performed once condition for decremented
		 priority becomes false again.

		 Default value is '10'.
		"
	    DEFVAL { 10 }
	::= { aliveEntry 15 }


END