-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00


-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
-- $RCSfile: mibtty,v $
-- $Revision: 1.19 $

BIANCA-BOX-TTY-MIB DEFINITIONS ::= BEGIN
        IMPORTS 
            NetworkAddress, IpAddress, Counter, Gauge, TimeTicks,
            enterprises
                FROM RFC1155-SMI
        
            DisplayString
                FROM RFC1158-MIB
    
            OBJECT-TYPE
                FROM RFC-1212
            
            Date, HexValue
                FROM BINTEC-MIB;

    bintec 	OBJECT IDENTIFIER ::= { enterprises 272 }
    bibo	OBJECT IDENTIFIER ::= { bintec 4 }
    tty		OBJECT IDENTIFIER 
	::= { bibo 41 }


    -- tty  Group

        ttyIfTable OBJECT-TYPE
            SYNTAX  SEQUENCE OF TtyIfEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
		"The ttyIfTable contains information relating to the 
                serial interfaces found on the system."
		::= { tty 1 }

	ttyIfEntry OBJECT-TYPE
            SYNTAX  TtyIfEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
		"TTY Port Description Interface entry"
	    INDEX   { ttyIfIndex }
              ::= { ttyIfTable 1 }

	TtyIfEntry ::=
            SEQUENCE {
                ttyIfIndex			INTEGER,
		ttyIfName	   		DisplayString,
		ttyIfNetwork			DisplayString,
		ttyIfProfile			INTEGER,
		ttyIfSpeed                      INTEGER,
		ttyIfCSQ			INTEGER,
		ttyIfAdminStatus		INTEGER,
		ttyIfOperStatus			INTEGER,
		ttyIfCommand			DisplayString,
		ttyIfAnswer			DisplayString,
                ttyIfMode                       INTEGER,
                ttyIfCurrentMode                INTEGER,
                ttyIfCurrentSpeed               INTEGER
            }

	ttyIfIndex OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Unique index of the tty Interface."
	::= { ttyIfEntry 1 }

	ttyIfName OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..16))
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       " Name for the Port"
	::= { ttyIfEntry 2 }

	ttyIfNetwork OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..60))
	    ACCESS  read-only
	    STATUS  obsolete
	    DESCRIPTION
		"GSM Network is actually used"
	::= { ttyIfEntry 3 }

	ttyIfProfile OBJECT-TYPE
            SYNTAX  INTEGER {
		profile1 (1),
		profile2 (2),
		profile3 (3),
		profile4 (4),
		profile5 (5)
	    }
            ACCESS  read-write
            STATUS  obsolete
	    DESCRIPTION
	       " The profile for this port "
	    DEFVAL { profile1 }
	::= { ttyIfEntry 4 }

	ttyIfSpeed OBJECT-TYPE
	    SYNTAX  INTEGER {
		e9600(1), e19200(2), e38400(3), e57600(4), e115200(5),
		default(6)
	    } 
	    ACCESS  read-write
	    STATUS  obsolete
	    DESCRIPTION
		"The external speed to the modem"
	    DEFVAL { e19200 }
	::= { ttyIfEntry 5 }



	ttyIfCSQ OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  obsolete
	    DESCRIPTION
	       " The GSM receive signal level "
	    DEFVAL { -113 }
	::= { ttyIfEntry 6 }

	ttyIfAdminStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	       disable(1),
	       enable(2)
	    }
	    ACCESS  read-write
	    STATUS  obsolete
	    DESCRIPTION
	       "Disable or enbale tty for Modem connection"
	    DEFVAL { disable }
	::= { ttyIfEntry 7 }

	ttyIfOperStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	       up(1),
	       down(2),
	       init(3),
	       called(4),
	       calling(5),
	       connect(6),
	       simwait(7),
	       pinwait(8),
	       pinerror(9),
	       error(10),
	       disconnected(11)
	    }
	    ACCESS  read-only
	    STATUS  obsolete
	    DESCRIPTION
	       "Operation state for this port"
	::= { ttyIfEntry 8 }


	ttyIfCommand OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..40))
	    ACCESS  read-only
	    STATUS  obsolete
	    DESCRIPTION
	       "Last Command to the Modem"
	::= { ttyIfEntry 9 }

	ttyIfAnswer OBJECT-TYPE
	    SYNTAX  DisplayString (SIZE (0..60))
	    ACCESS  read-only
	    STATUS  obsolete
	    DESCRIPTION
	       "Last Answer from the Modem"
	::= { ttyIfEntry 10 }

	ttyIfMode OBJECT-TYPE
            SYNTAX  INTEGER {
                disabled(1),
                aux(2),
                soip(3),
                gps(4)




            }
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "The mode in which the tty interface should operate
                 from now on."
            DEFVAL { disabled }
	::= { ttyIfEntry 11 }

	ttyIfCurrentMode OBJECT-TYPE
            SYNTAX  INTEGER {
                disabled(1),
                aux(2),
                soip(3),
                gps(4)




            }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The current mode in which the tty interface operates now."
            DEFVAL { disabled }
	::= { ttyIfEntry 12 }

	ttyIfCurrentSpeed OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The current speed of the tty interface."
	::= { ttyIfEntry 13 }

	
END