-- ***************************************************************** -- NMS-VLAN-EXT-MIB.my: NMS VLAN EXT MIB -- -- January 2010 -- Edit by LIUQIANG -- Copyright (c) 2010 by NMS, Inc. -- All rights reserved. -- ***************************************************************** NMS-VLAN-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,INTEGER, Integer32, Unsigned32,Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TimeStamp, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF nmsMgmt, nmslocal FROM NMS-SMI IpAddress, Counter FROM RFC1155-SMI DisplayString, PhysAddress,ifIndex FROM RFC1213-MIB VlanIndex FROM Q-BRIDGE-MIB EnabledStatus FROM P-BRIDGE-MIB; --definition of nms device VLAN extended informations nmsvlanExt OBJECT IDENTIFIER ::= { nmsMgmt 182 } dot1qVlanTransparentMode OBJECT-TYPE SYNTAX INTEGER{ True(1), False(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Vlan global transport mode.Not supported in S8500 series. " ::= { nmsvlanExt 1 } dot1qVlanUntagged OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Vlan global transport mode.Not supported in S8500 series. " ::= { nmsvlanExt 2 } dot1qPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1qPortVlanTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of dot1qVlan operation." ::= { nmsvlanExt 3 } dot1qPortVlanTableEntry OBJECT-TYPE SYNTAX Dot1qPortVlanTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of dot1qVlan operation." INDEX { ifIndex } ::= { dot1qPortVlanTable 1 } Dot1qPortVlanTableEntry ::= SEQUENCE { dot1qPvid VlanIndex, dot1qPortType INTEGER, dot1qPortSwitchingMode INTEGER, dot1qPortAllowedVlans OCTET STRING, dot1qPortUntaggedVlans OCTET STRING, dot1qPortAcceptableFrameTypes INTEGER, dot1qPortIngressFiltering TruthValue, dot1qPortGvrpStatus EnabledStatus, dot1qPortGvrpFailedRegistrations Counter64, dot1qPortGvrpLastPduOrigin PhysAddress, dot1qUplinkPortTpid INTEGER } dot1qPvid OBJECT-TYPE SYNTAX VlanIndex ACCESS read-write STATUS mandatory DESCRIPTION "The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1, the same name with Q-BRIDGE-MIB" DEFVAL { 1 } ::= { dot1qPortVlanTableEntry 1 } dot1qPortType OBJECT-TYPE SYNTAX INTEGER{FastEthernet(2), GigaEthernet(3), TGigaEthernet(4), EPON(5), EPONLLID(6), PortChannel(11) } ACCESS read-only STATUS mandatory DESCRIPTION "value for port vlan type." ::= { dot1qPortVlanTableEntry 2 } dot1qPortSwitchingMode OBJECT-TYPE SYNTAX INTEGER{Access(1), Trunk(2), Dot1qTunnel(3), Dot1qTranslatingTunnel(4), Dot1qTunnelUplink(5) } ACCESS read-write STATUS mandatory DESCRIPTION "value for port vlan mode." ::= { dot1qPortVlanTableEntry 3 } dot1qPortAllowedVlans OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "value for port allowed vlan list." ::= { dot1qPortVlanTableEntry 4 } dot1qPortUntaggedVlans OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "value for port untagged vlan list." ::= { dot1qPortVlanTableEntry 5 } dot1qPortAcceptableFrameTypes OBJECT-TYPE SYNTAX INTEGER { admitAll(1), admitOnlyVlanTagged(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.3" DEFVAL { admitAll } ::= { dot1qPortVlanTableEntry 6 } dot1qPortIngressFiltering OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.4" DEFVAL { false } ::= { dot1qPortVlanTableEntry 7 } dot1qPortGvrpStatus OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port." DEFVAL { enabled } ::= { dot1qPortVlanTableEntry 8 } dot1qPortGvrpFailedRegistrations OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of failed GVRP registrations, for any reason, on this port." ::= { dot1qPortVlanTableEntry 9 } dot1qPortGvrpLastPduOrigin OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Source MAC Address of the last GVRP message received on this port." ::= { dot1qPortVlanTableEntry 10 } dot1qUplinkPortTpid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Default value is 0x8100. Note: only when the value of 'dot1qPortSwitchingMode' is 'Dot1qTunnelUplink', this value is available." ::= { dot1qPortVlanTableEntry 11 } dot1qPortVlanTranslateTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1qPortVlanTranslateTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of dot1q Port Vlan Translate Table operation." ::= { nmsvlanExt 4 } dot1qPortVlanTranslateTableEntry OBJECT-TYPE SYNTAX Dot1qPortVlanTranslateTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of dot1qVlan Translate operation. Attention: When VLAN is created, dttTeMode,dttTeOldVlanId¡¢dttTeNewVlanId should be provided, and dttTePri is optional. When item is deleted, only dttTeMode and dttTeOldVlanId needs to provide." INDEX { ifIndex, dttTeOldVlanId} ::= { dot1qPortVlanTranslateTable 1 } Dot1qPortVlanTranslateTableEntry ::= SEQUENCE { dttTeMode INTEGER, dttTeOldVlanId INTEGER, dttTeNewVlanId INTEGER, dttTePri INTEGER, dttTeRowStatus RowStatus } dttTeMode OBJECT-TYPE SYNTAX INTEGER{DttTeModeFlat(1), DttTeModeQinQ(2) } ACCESS read-write STATUS mandatory DESCRIPTION "value for port vlan translation item mode. The default value is DttTeModeQinQ(2)." ::= { dot1qPortVlanTranslateTableEntry 1 } dttTeOldVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "value for port old vlan id to be translated." ::= { dot1qPortVlanTranslateTableEntry 2 } dttTeNewVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "value for port new vlan id to be translated." ::= { dot1qPortVlanTranslateTableEntry 3 } dttTePri OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "value for port new vlan id priority to be translated." ::= { dot1qPortVlanTranslateTableEntry 4 } dttTeRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "value for port vlan translation row status." ::= { dot1qPortVlanTranslateTableEntry 5 } dot1qTunnel OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Dot1qTunnel enable operation. enabled(1),disabled(2). Default value is disable." ::= { nmsvlanExt 5 } END