-- -- Load12.MIB -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Tuesday, July 13, 2004 at 11:37:50 -- -- Load12.MIB -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Sunday, April 18, 2004 at 13:25:43 -- -- Load12.MIB -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Sunday, April 11, 2004 at 13:05:36 -- -- Load12.MIB -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Sunday, April 11, 2004 at 12:23:34 -- -- ========================================================= -- Version 1.3.16 - 25-Oct-2009 - Shlomi Biton -- =================================================================== -- Adding INET Addresses MIB items: genOpServerInetAddressType and -- genOpServerInetAddress. -- -- ========================================================= -- Version 1.3.15 - 29-Oct-2007 - Shlomi Biton -- =================================================================== -- Adding the values of swBootRuntimeImage(35) and swBootComponentImage(36) -- to genAppFileType. -- -- ======================================================== -- ======================================================== -- MIB: Lucent Common Download / Upload MIB -- ========================================================= -- Version 1.3.14 - 14/6/2007 - Spector Pesah -- =================================================================== -- Add new file location flash(7) to genAppFileLocation. -- -- ======================================================== -- MIB: Lucent Common Download / Upload MIB -- ========================================================= -- Version 1.3.13 - 14/7/2006 - Spector Pesah -- =================================================================== -- New error code3 were defined for genOpLastFailureIndex - 210 error related to -- validation of encryption key, and wrongAuthFileID - reported when attempt is made to -- download auth file with wrong AFID -- -- Version 1.3.12 - 23-Jan-2006 - Shlomi Biton -- 1. Adding new enumerations to genOpIndex - uploadAuthFile(22), uploadLicFile(23), -- uploadSyslogFile(24) and uploadCDRFile(25). -- 2. Adding new enumeration to genOpProtocolType - usb(7). -- 3. Adding note to genOpFileName regarding usb mass storage devices. -- 4. Adding new enumerations to genAppFileType - syslogFile(22) and cdrFile(23). -- -- Version 1.3.11 - 13/10/2004 - Shlomi Biton -- -- Fixing Compilation Error -- -- Version 1.3.10 - 13/7/2004 - Shlomi Biton -- -- New error codes were defined for genOpLastFailureIndex - error related to -- vlidation of digital signature of a Gateway image -- -- Renaming genAppFileType 3 values: -- 1. phoneScriptFile(17) -- ====================================================================Version 1.3.9 - 31/May/2004 - Shlomi Biton -- -- Changing the phoneConfig term to phoneScript -- Renaming genOpIndex 4 values: -- 1. downloadPhoneScriptFile(14) -- 2. uploadPhoneScriptFile(15) -- Renaming genAppFileType 3 values: -- 1. phoneScriptFile(17) -- ==================================================================== -- -- Version 1.3.8 - 12/May/2004 - Shlomi Biton -- -- This version includes new Operation for tftp server images and configuration files and -- also for DHCP leased file. -- In general TFTP server will support downloading images and Scripts files (configuration files) -- and also uploading script files. -- The DHCP server will support uploading leased files. -- The exact changes are as follows: -- Adding to genOpIndex 4 values: -- 1. downloadPhoneConfigFile(14) -- 2. uploadPhoneConfigFile(15) -- 3. downloadPhoneImageFile(16) -- 4. uploadDhcpBindingFile(17) -- Adding to genAppFileType 3 values: -- 1. phoneConfigFile(17) -- 2. phoneImageFile(18) -- 3. dhcpBindingFile(19) -- ==================================================================== -- -- Version 1.3.7 - 11/May/2004 - Pesah Spector -- -- This version includes new Operation for license file download as defined in -- "GW Licensing SRAD for VPN and Firewall Features" SRAD (CID 103067) -- -- The Gateway will support a new enumeration value in genOpIndex MIB Table entry used for the -- download license file operation = downloadLicFile (13). -- The Gateway will support a new enumeration value in genAppFileType MIB Table entry to -- represent license file presence = licenseFile (16). -- ==================================================================== -- -- Version 1.3.6 - 11/Apr/2004 - Pesah Spector -- -- This version includes new Operation for authentication file download as defined in -- ASG SRAD for Gateways CID 101994 -- swNonDownLoadRunTimeImage(14) changed from 13 to 14 because of the conflict with -- swAPImage enumeration value -- ==================================================================== -- -- Version 1.3.5 - 7/Nov/2002 - Pesah Spector -- -- This version includes new constants defined for secure copy protocol -- (SCP) and the G700 product line -- -- 1. genOpProtocolType MIB variable was augmeneted with two new -- values- scp(5) and sftp(6) -- -- 2. genOpLastFailureIndex MIB variable was augmented with two new -- failure indications û server authentication failure and device authentication failure, -- The server authentication fails when server is unknown to device, -- device authentication fails when server cannot authenticate device in -- "hostbased" authentication. The new constants are sshServerAuth(108) and sshDeviceAuth(109) -- -- 3. To support images of non-downloadable code like, a bootstrap code a definition of -- genAppFileType object type was augmented with a new enumerated value -- swNonDownLoadRunTimeImage(13). This change was entailed by G700 development. -- -- ======================================================================== -- Version: 1.3.4 13, September 2000 -- -- Version 1.3.4 - 13/Sep/2000 - ItaiZ -- 1. syncStandbyAgent(11) replaces -- copyConfigToStandbyAgent(11),copySoftwareToStandbyAgent(12) -- Version 1.3.3 - 13/Sep/2000 - ItaiZ -- 1. Support for P550/P880 stand-by Agent -- Added copyConfigToStandbyAgent(11),copySoftwareToStandbyAgent(12) to -- genOpIndex. -- 2. genAppFileId is now bounded by range (1..65535). -- ========================================================= -- -- Copyright 1999 Lucent Technologies, Ltd. -- All Rights Reserved. -- -- Reproduction of this document is authorized on condition -- that the foregoing copyright notice is included. -- -- This Lucent Technologies SNMP Management Information Base -- Specification embodies Lucent Technologies confidential and -- proprietary intellectual property. Lucent Technologies retains all -- title and ownership in the Specification, including any revisions -- -- It is Lucent Technologies intent to encourage the widespread use of this -- Specification in connection with the management of Lucent Technologies -- products. -- -- Lucent Technologies grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in connection -- with the management of Lucent Technologies products. -- -- This Specification is supplied "as is," and Lucent Technologies makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- -- ========================================================= -- -- Overview: -- -- The Load MIB defines upload, download and copy of application software -- and configuration information. -- -- The genOperations group -- -- Each row in the genOpTable represents an operation that this system can -- perform. A walk of this table should provide a list of available -- operations that can be performed by the system. The genOpTable contains -- all configuration information nessary to perform upload, download, and -- copy operations within the system. Source, Destination, operational -- trigger, opertional status and error logging information are contained -- on a per row basis (each row again representing an operation that -- this table can perform). -- -- The genApplication Group -- -- Table of Application (FILE) entries. Each row uniquely defines an -- application in the system. Applications can be defined as any entity -- that can be read or written from or to the system. This includes -- software images, boot code, configuration files, prom code, etc. -- Each row contains information used to catalog the application (FILE) -- entries present in the system. A walk of the genAppFileTable should -- provide a directory-like listing of all application software, -- bootcode, configuration files and misc. accessable embedded software -- in the system. Each entry contains information about the application -- such as type, size, version number and date stamp. -- -- ========================================================= LOAD-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI InetAddress, InetAddressType FROM INET-ADDRESS-MIB DisplayString, RowStatus FROM SNMPv2-TC; load MODULE-IDENTITY LAST-UPDATED "190009131420Z" -- September 13, 1900 at 14:20 GMT ORGANIZATION "Lucent Technologies Inc." CONTACT-INFO "Itai Zilbershtein -- izilbers@avaya.com Yigal Nehaysi -- ynehaysi@avaya.com Virginia Brown -- vibrown@avaya.com" DESCRIPTION "Lucent Common Download / Upload Private MIB" REVISION "190009131555Z" -- September 13, 1900 at 15:55 GMT DESCRIPTION "Rev 1.3.4 -one action sync all files between standby and active agent in the P550/P880." REVISION "190009131420Z" -- September 13, 1900 at 14:20 GMT DESCRIPTION "Rev 1.3.3 -Support for P550/P880 stand-by Agent." ::= { lucentMibs 53 } -- -- Node definitions -- -- September 13, 1900 at 14:20 GMT -- September 13, 1900 at 14:20 GMT -- September 13, 1900 at 15:55 GMT -- -- Node definitions -- -- September 13, 1900 at 14:20 GMT -- September 13, 1900 at 15:55 GMT -- September 13, 1900 at 14:20 GMT -- -- Node definitions -- -- 13 Sep. 2000 -- September 13, 1900 at 14:20 GMT -- September 13, 1900 at 14:20 GMT -- September 13, 1900 at 15:55 GMT -- -- Node definitions -- lucent OBJECT IDENTIFIER ::= { enterprises 1751 } lucentProducts OBJECT IDENTIFIER ::= { lucent 1 } lucentMibs OBJECT IDENTIFIER ::= { lucent 2 } -- Groups in the Load mib genOperations OBJECT IDENTIFIER ::= { load 1 } -- The genOperations group -- genLoadNumberOfSession OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of operational sessions in progress in this system" ::= { genOperations 1 } genOpTable OBJECT-TYPE SYNTAX SEQUENCE OF GenOpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of configuration attributes which define the operational functions and the results on a per module basis. This group provides the mechanism by which available operations are initiated, monitored and reported." ::= { genOperations 2 } genOpEntry OBJECT-TYPE SYNTAX GenOpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing data about a single modules operations." INDEX { genOpModuleId, genOpIndex } ::= { genOpTable 1 } GenOpEntry ::= SEQUENCE { genOpModuleId INTEGER, genOpIndex INTEGER, genOpRunningState INTEGER, genOpSourceIndex Integer32, genOpDestIndex Integer32, genOpServerIP IpAddress, genOpUserName DisplayString, genOpPassword OCTET STRING, genOpProtocolType INTEGER, genOpFileName DisplayString, genOpRunningStateDisplay DisplayString, genOpLastFailureIndex INTEGER, genOpLastFailureDisplay DisplayString, genOpLastWarningDisplay DisplayString, genOpErrorLogIndex Integer32, genOpResetSupported INTEGER, genOpEnableReset INTEGER, genOpNextBootImageIndex Integer32, genOpLastBootImageIndex Integer32, genOpFileSystemType INTEGER, genOpReportSpecificFlags INTEGER, genOpOctetsReceived Integer32, genOpServerInetAddressType InetAddressType, genOpServerInetAddress InetAddress } genOpModuleId OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Index which identifies the module inside the chassis for which this entry contains information. Equals the number of the slot by which the group is accessed or the stackable index." ::= { genOpEntry 1 } genOpIndex OBJECT-TYPE SYNTAX INTEGER { uploadConfig(1), downloadConfig(2), report(3), uploadSoftware(4), downloadSoftware(5), localConfigFileCopy(6), localSWFileCopy(7), uploadLogfile(8), eraseFile(9), show(10), syncStandbyAgent(11), downloadAuthFile(12), downloadLicFile(13), downloadPhoneScriptFile(14), uploadPhoneScriptFile(15), downloadPhoneImageFile(16), uploadDhcpBindingFile(17), uploadAnnouncements(18), -- Reserved for AVAYA-LOAD-MIB downloadAnnouncements(19), -- Reserved for AVAYA-LOAD-MIB renameAnnouncement(20), -- Reserved for AVAYA-LOAD-MIB eraseAnnouncement(21), -- Reserved for AVAYA-LOAD-MIB uploadAuthFile(22), uploadLicFile(23), uploadSyslogFile(24), uploadCDRFile(25), backupConfig(28), -- Reserved for AVAYA-LOAD-MIB restore(29) -- Reserved for AVAYA-LOAD-MIB } MAX-ACCESS read-only STATUS current DESCRIPTION "Index to identify the operation supported by this row entry. Each operation type that is supported by this module should be represented by a unique row in this MIB Table. A walk of this MIB table should reveal all the operations that are supported by the device. Note: genOpServerIP is used for IPv4 addresses only. genOpServerInetAddressType/genOpServerInetAddress are used for IPv4/IPv6 addresses. The operations supported are: uploadConfig -- The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP server. downloadConfig -- The 'genOpDestIndex' should be set to the 'genAppFileId' of the config file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the config file on the TFTP server. report -- uploadSoftware -- The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config file will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the software file you are uploading. The 'genOpFileName' should be set to the name and path of the image file on the TFTP server. downloadSoftware -- The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config file will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the image file on the TFTP server. localConfigFileCopy -- (using a 'genOpType' of 'localPeerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the config file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are copying from. The 'genOpServerIP' should be set to NULL. The 'genOpProtocolType' should be set to 'localPeerTransport'. The 'genOpFileName' should be set to NULL. localSWFileCopy -- (using a 'genOpType' of 'localPeerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the software file you are copying from. The 'genOpServerIP' should be set to NULL. The 'genOpProtocolType' should be set to 'localPeerTransport'. The 'genOpFileName' should be set to NULL. localConfigFileCopy -- (using a 'genOpType' of 'localServerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the config file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable') or ZERO (0) if copying to a localServer. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are copying from or ZERO (0) if copying from a localServer. The 'genOpServerIP' should be set to the address of the local server. The 'genOpProtocolType' should be set to 'localServerTransport'. localSWFileCopy -- (using a 'genOpType' of 'localServerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the software file you are copying from. The 'genOpServerIP' should be set to the address of the local server. The 'genOpProtocolType' should be set to 'localServerTransport'. uploadLogfile -- The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the log file you are copying from. The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpFileName' should be set to the name and path of the log file on the TFTP server. eraseFile -- The 'genOpDestIndex' Is not applicable for this command. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the file you wish to erase. The 'genOpServerIP' should be set to 0. The 'genOpProtocolType' should be set to 0. The 'genOpFileName' should be set to NULL. show -- Reporting information to the CLI. syncStandbyAgent(11) -- copy configuration AND software image files to the (non-active) standby agent in a P550/P880. The 'genOpDestIndex' should be set to 1 The 'genOpSourceIndex' should be set to 1 The 'genOpServerIP' should be set to NULL. The 'genOpProtocolType' should be set to 'localPeerTransport'. The 'genOpFileName' should be set to NULL. downloadAuthFile (12) -- copy Services Logins authentication file to the device. The 'genOpDestIndex' should be set to the 'genAppFileId' of the auth file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. downloadLicFile (13) - -- copy SLicense file to the device. The 'genOpDestIndex' should be set to the 'genAppFileId' of the auth file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. downloadPhoneScriptFile (14) - copy IP phone configuration file (or other endpoints configuration files) to the device TFTP Server directory. IP Phone configuration file includes Setting File and Upgrade Script. Non Volatile Storage. The 'genOpDestIndex' should be set to the 'genAppFileId' of the phone configuration file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. uploadPhoneScriptFile(15) - copy IP phone configuration file (or other endpoints configuration files) from the device TFTP Server directory to remote server. IP Phone configuration file includes Setting File and Upgrade Script. The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. downloadPhoneImageFile(16) - copy IP phone images file (or other endpoints images files) to the device TFTP Server Directory. Volatile Storage. The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config file will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the image file on the TFTP/ftp server. uploadDhcpBindingFile(17) - copy DHCP Binding File from the device to remote server. The binding file includes information of IP , MAC couples and leased time. Non Volatile Storage. The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. uploadAuthFile(22) - copy authentication File from the device to remote server. The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. uploadLicFile(23) - copy License File from the device to remote server. The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. uploadSyslogFile(24) - copy Syslog File from the device to remote server. The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. uploadCDRFile(25) - copy CDR File from the device to remote server. The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP/ftp/scp server. " ::= { genOpEntry 2 } genOpRunningState OBJECT-TYPE SYNTAX INTEGER { idle(1), beginOperation(2), waitingIp(3), runningIp(4), copyingLocal(5), readingConfiguration(6), executing(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the operation to perform and the state of that operation. This field acts as both the trigger to initiate the operation (via the beginOperation) and the status field of the operation itself (i.e. waiting-ip, running-ip, etc.). It is expected that all dependent MIB objects will be set before the trigger is set to beginOperation. The operations completion is triggered by the return to the idle state. idle(1), - Operation not in progress beginOperation(2), - Trigger by NMS to start the operation waitingIp(3), - Communication phase; waiting for response runningIp(4), - Communication phase; transferring data copyingLocal(5), - Local operation readingConfiguration(6), - Parsing / Executing configuration file executing(7) - Executing Command (such as erasing a file or reporting) " DEFVAL { idle } ::= { genOpEntry 3 } genOpSourceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index value (taken from the genAppFileTable) of the source of the operation. NOTE: A value of zero (0) here indicates that the Server (specified below) is the source." ::= { genOpEntry 4 } genOpDestIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index value (taken from the genAppFileTable) of the destination of the operation. NOTE: A value of zero (0) here indicates that the Server (specified below) is the Destination." ::= { genOpEntry 5 } genOpServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of the server from/to which the file has to be Download/Upload. NOTE: In the case of localPeerTransport this value should be NULL." ::= { genOpEntry 6 } genOpUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contains the username to be used if the protocol specified in genOpProtocolType requires one. The default value will be the empty string" DEFVAL { '00'h } ::= { genOpEntry 7 } genOpPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contains the password to be used if the protocol specified in genOpProtocolType requires one. The default value will be the empty string" DEFVAL { '00'h } ::= { genOpEntry 8 } genOpProtocolType OBJECT-TYPE SYNTAX INTEGER { tftp(1), ftp(2), localPeerTransport(3), localServerTransport(4), scp(5), sftp(6), usb(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the protocol between the management station and the device for Download/Upload of the file." ::= { genOpEntry 9 } genOpFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The location (including the FULL path) of the file in the server. NOTE: In the case of localPeerTransport this value should be NULL. In case of genOpProtocolType==usb(7) the file name shall include the prefix of the usbdevice/file system as follows: /usbdevice0-127/backupdirectory/backupsubdirectory/filename. An example can be: /usbdevice0/backupg350/IPPHONE/46xx_settings.txt. If there is only one usb mass storage device connected to the gateway then use /usbdevice0/ to copy from/to this device files. " ::= { genOpEntry 10 } genOpRunningStateDisplay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the operation for Display on the terminal during operation process." ::= { genOpEntry 11 } genOpLastFailureIndex OBJECT-TYPE SYNTAX INTEGER { noError(1), genError(2), configError(3), busy(4), timeout(5), cancelled(6), incompatibleFile(7), fileTooBig(8), protocolError(9), flashWriteError(10), nvramWriteError(11), confFileGenErr(12), confFileParseError(13), confFileExecError(14), undefinedError(100), fileNotFound(101), accessViolation(102), outOfMemory(103), illegalOperation(104), unknownTransferId(105), fileAlreadyExists(106), noSuchUser(107), sshServerAuth(108), sshDeviceAuth(109), badChainOfTrust(201), badChainOfTrustFormat (202), notCodeSigningAuthority (203), illegalDSA (204), badPublicKeyFormat(205), illegalDSKeySize(206), badDSFormat(207), authDSFailure(208), configFileSecretIntegrityFault(210), wrongAuthFileID(211) } MAX-ACCESS read-only STATUS current DESCRIPTION "While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is anything other than 'no-error' then 'genOpLastFailureDisplay' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. errors below this are locally generated. Configuration files may return errors after download as a result of reading a config file into the system. confFileGenErr - General (unknown error) confFileParseError - Reading of config file resulted in parsing errors. confFileExecError - Reading of config file resulted in execution errors. sshServerAuth - SCP server failed to authenticated himself to a device. sshDeviceAuth(109)- device failed to authenticate to the SCP server (unknown user/bad password) badChainOfTrust(201) - Failed to authenticate the download with Trusted Certificate Root Authority badChainOfTrustFormat (202) - Not supported chain of trust format notCodeSigningAuthority (203) Software image was signed by non-authorized Certificate Authority illegalDSA (204) - Software image is signed with non FIPS 140-2 certified algorithm badPublicKeyFormat(205) - Not supported public key format. illegalDSKeySize(206) - Software image is signed with non FIPS 140-2 certified key size badDSFormat(207) - Not supported digital signature format authDSFailure(208) - Failed to authenticate digital image signature configFileSecretIntegrityFault(210) - The configuration file was encrypted with a different key. Configuration download operation was aborted. " ::= { genOpEntry 12 } genOpLastFailureDisplay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the last error, Null if there is no error." ::= { genOpEntry 13 } genOpLastWarningDisplay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Last warning which didn't stop the operation (not fatal error)." ::= { genOpEntry 14 } genOpErrorLogIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Index in the 'genAppFileTable' under which an error log has been created. In the case of file that produce errors this file should contain a log of errors that occurred. (This item should be zero if it does not exist)" ::= { genOpEntry 15 } genOpResetSupported OBJECT-TYPE SYNTAX INTEGER { supported(1), notSupported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if a reset (after operation completion) is supported by this Module." ::= { genOpEntry 16 } genOpEnableReset OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to do a reset after the operation completed successfully." ::= { genOpEntry 17 } genOpNextBootImageIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The row in the 'genAppFileTable' of the default Application that the device will boot from when a standard reboot is performed." ::= { genOpEntry 18 } genOpLastBootImageIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Index in the 'genAppFileTable' of the default Application that the device was last booted from." ::= { genOpEntry 19 } genOpFileSystemType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates what type of file system is supported by this module. A value of 'static' indicates that rows in the 'genAppFileTable' are not removable nor can new entries be created. A value of 'dynamic' indicates that entries in the 'genAppFileTable' are both removable and can be created." ::= { genOpEntry 20 } -- without OSPF database genOpReportSpecificFlags OBJECT-TYPE SYNTAX INTEGER { fullReport(1), partialReport(2), notSupported(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Contain modifiers to the Report operation. fullReport - Full configuration report partialReport - A report without the information stored in the OSPF database notSupported - For operations other than report, this MIB has no meaning and can return not Supported or not be supported." ::= { genOpEntry 21 } genOpOctetsReceived OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "While a download is in progress this indicates the number of bytes transferred so far. " ::= { genOpEntry 22 } genOpServerInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The address type of genOpServerInetAddress. " ::= { genOpEntry 23 } genOpServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Inet Address of the remote file server. 1. The address type of this object is specified in genOpInetAddressType. 2. Management applications can use genOpServerIP or genOpServerInetAddressType/genOpServerInetAddress to set IPv4 server address and only genOpServerInetAddressType/genOpServerInetAddress to set IPv6 server address. 3. The genOpServerInetAddressType must always been set before the genOpServerInetAddress is set (the genOpServerInetAddress must conform to the genOpServerInetAddressType). 4. Setting genOpServerIP address mib item will change genOpServerInetAddressType to IPv4(1) and genOpServerInetAddress to IPv4 address configured. 5. Setting genOpServerInetAddress as IPv4 address will also set genOpServerIP. 6. Setting genOpServerInetAddress as IPv6 address will also set genOpServerIP to 0.0.0.0. 7. Default of genOpServerInetAddressType is unknown(0) and genOpServerInetAddress is zero length. 8. Setting genOpServerInetAddressType to IPv4 will return genOpServerIP and genOpServerInetAddress to default value of 0.0.0.0. Setting genOpServerInetAddressType to value other than IPv4 return genOpServerIP to default value of 0.0.0.0 and genOpServerInetAddress to default value of null string. " ::= { genOpEntry 24 } genApplications OBJECT IDENTIFIER ::= { load 2 } -- The genApplication Group -- genAppFileTable OBJECT-TYPE SYNTAX SEQUENCE OF GenAppFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Application (FILE) entries. Each row uniquely defines an application in the system. Applications can be defined as any entity that can be read or written from or to the system. This includes software images, boot code, configuration files, prom code, etc." ::= { genApplications 1 } genAppFileEntry OBJECT-TYPE SYNTAX GenAppFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing data about a single application / config file." INDEX { genOpModuleId, genAppFileId } ::= { genAppFileTable 1 } GenAppFileEntry ::= SEQUENCE { genAppFileId INTEGER, genAppFileName DisplayString, genAppFileType INTEGER, genAppFileDescription DisplayString, genAppFileSize Integer32, genAppFileVersionNumber OCTET STRING, genAppFileLocation INTEGER, genAppFileDateStamp DisplayString, genAppFileRowStatus RowStatus } genAppFileId OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Index which uniquely identifies the application. NOTE: This index CANNOT BE ZERO (0) since the index of zero is reserved as an indication of network server location in the genOpSourceIndex and genOpDestIndex above." ::= { genAppFileEntry 1 } genAppFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the application." ::= { genAppFileEntry 2 } genAppFileType OBJECT-TYPE SYNTAX INTEGER { runningConfiguration(1), startupConfiguration(2), defaultConfiguration(3), report(4), genConfigFile(5), logFile(6), nvramFile(7), swRuntimeImage(8), swBootImage(9), swComponent(10), other(11), swWebImage(12), swAPImage(13), swNonDownLoadRunTimeImage(14), asgAuthFile(15), licenseFile(16), phoneScriptFile(17), phoneImageFile(18), dhcpBindingFile(19), announcementFile(20), -- Reserved for AVAYA-LOAD-MIB backupDatabase(21), -- Reserved for AVAYA-LOAD-MIB syslogFile(22), cdrFile(23), swRuntimeServicePack(24), -- Reserved for AVAYA-LOAD-MIB swComponentServicePack(25), -- Reserved for AVAYA-LOAD-MIB trustedCertificate(26), -- Reserved for AVAYA-LOAD-MIB certificateRequest(27), -- Reserved for AVAYA-LOAD-MIB serverCertificate(28), -- Reserved for AVAYA-LOAD-MIB privateKey(29), -- Reserved for AVAYA-LOAD-MIB staticLanguagePack(30), -- Reserved for AVAYA-LOAD-MIB phoneAvayaUnicodeMessageFile(31), -- Reserved for AVAYA-LOAD-MIB phoneCustomUnicodeMessageFile(32), -- Reserved for AVAYA-LOAD-MIB startupConfigurationWizardTaskFile(33), -- Reserved for AVAYA-LOAD-MIB genConfigurationWizardTaskFile(34), -- Reserved for AVAYA-LOAD-MIB swBootRuntimeImage(35), swBootComponentImage(36) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type (class) of the application. This class serves to catagorize the many application files in the system into some fixed types: runningConfiguration -- This entry represents a virtual file in the system. Use of this entry in the genOpTable should serve to cause the system to generate it's configuration or to force the system to read a new config into it's configuration. startupConfiguration -- This entry represents a real file that is used at start-up to configure the device. defaultConfiguration -- This entry represents a file which contains the default configuration of the device. report -- ?? genConfigFile -- This entry represents a file which contains configuration information (similar to the 'startupConfiguration' above but is not automatically read by the device. This entry is used to represent 'alternate', 'backup' or 'experimental' configurations that the user may which to store on the device. nvramFile -- This entry represents a file that is contain in the nvram files system that does not fit any of the other pre-defined types. swRuntimeImage -- This entry represents a software images that contains operational code that is currently being used to run the device. swBootImage -- This entry represents a software image that contain operational code that is used to initally boot the device. swComponent -- This entry represents a file that is stored as an 'alternate', 'backup' or 'experimental' version of operational code. other -- other swWebImage -- The Image file of the embedded Web application (java application, etc). swAPImage -- the firmware of the Light AP. Device stores the image to support Light AP firmwareless operation. image boot service swNonDownLoadRunTimeImage - image of a non-downloadable code e.g. a bootstrap code asgAuthFile - encrypted Services Logins file licenseFile - file controlling licensed features activation phoneScriptFile(17) - Avaya IP Phone Configuration files (or other endpoints configuration files) as Setting file and Upgrade Script, Stored in device TFTP Server directory, Non Volatile Storage. phoneImageFile(18) - Avaya IP Phone Images files (or other endpoints images files), stored in device TFTP Server directory, Volatile Storage. dhcpBindingFile(19) - Device DHCP server IP binding file. Includes information about bindings of IP to MAC and leased time. " ::= { genAppFileEntry 3 } genAppFileDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "A description of the application." ::= { genAppFileEntry 4 } genAppFileSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The size (expressed as the number of bytes) of the application." ::= { genAppFileEntry 5 } genAppFileVersionNumber OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The current version of the application. If this files does not carry a version this field should be NULL." ::= { genAppFileEntry 6 } genAppFileLocation OBJECT-TYPE SYNTAX INTEGER { ram(1), flashBankA(2), flashBankB(3), nvram(4), bootProm(5), flash(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The physical location of the application." ::= { genAppFileEntry 7 } genAppFileDateStamp OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp is the Real Time if supported otherwise sysUpTime. The convention for this field is as follows: Real Time: Entry is prefixed with an 'R' character and time is formatted using the convention for date-and-time (rfc1903) DISPLAY-HINT 'R-2d-1d-1d,1d:1d:1d.1d,1a1d:1d' field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: R-1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SysUpTime: Entry is prefixed with an 'S' character and time is formatted using a portion of that date-and-time convention DISPLAY-HINT 'S-1d-1d,1d:1d:1d.1d' field octets contents range ----- ------ -------- ----- 1 3 month 1..12 2 4 day 1..31 3 5 hour 0..23 4 6 minutes 0..59 5 7 seconds 0..60 6 8 deci-seconds 0..9 For example, S-5-26,13:30:15.0 Represents a file that has existed in the system for 5 months, 26 days, 13 hours, 30 minutes, 15 seconds exactly. This value will be reset after a reboot of the system." ::= { genAppFileEntry 8 } genAppFileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry in the table. Note the available states: active(1), -- Fully configured and active. notInService(2) -- NOT SUPPORTED. notReady(3), -- Entry NOT FULLY configured. createAndGo(4), -- Used to add new Applications in the system. createAndWait(5) -- Used to add new Applications in the system. destroy(6) -- Used to delete Applications in the system." ::= { genAppFileEntry 9 } END -- -- Load12.MIB --