AVAYA-SURV-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, enterprises, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TruthValue, DateAndTime, TimeInterval, DisplayString FROM SNMPv2-TC InetAddressType, InetAddress, InetPortNumber, InetAddressIPv6 FROM INET-ADDRESS-MIB IpAddress FROM RFC1155-SMI avGatewayMibs FROM AVAYAGEN-MIB; avSurvMib MODULE-IDENTITY LAST-UPDATED "200810221615Z" ORGANIZATION "Avaya" CONTACT-INFO " Avaya Customer Services Postal: Avaya, Inc. 211 Mt Airy Rd. Basking Ridge, NJ 07920 USA Tel: +1 908 953 6000 E-mail: executiveoffic@avaya.com WWW: http://www.avaya.com " DESCRIPTION " R4.1 Standard Local Survivability (SLS) MIB This module defines an interface to Survivability mode of operation.This allows a gateway to have a basic set of call features if it loses communication with a main call controller (CC). When the gateway is in survivabilty mode of operation, it will continue to register to H.248 controller IP addresses in the MGC list. If a re-registration to the H.248 controller can be made, the survivability mode will be disabled and any new calls will be managed by the MGC. Active calls between two local IP phones will be maintained because they are established as shuffled calls. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification)embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisions. It is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties non-exclusive license to use this Specification in connection with the management of AVAYA products. This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. avSurvMib | + .0 avSurvNotification | + .1 avSurvConfig | + .2 avSurvStationTable | (index: avSurvStationIndex) | + .3 avSurvTrunkGroupTable | (index: avSurvTrunkGroupNum) | + .4 avSurvTrunkTable | (indexes: avSurvTrunkRefNumber, | avSurvTrunkIndex) | + .5 avSurvArsTable | (index: avSurvDialIndex) | + .6 avSurvFacTable | (index: avSurvFacIndex) | + .7 avSurvIpVoiceCodecSetTable | (indexes: avSurvIpVoiceCodecSetNum,) | avSurvIpVoiceCodecSetIndex) | + .8 avSurvIpCodecSetConfig | | + .9 avSurvSlotConfigTable | (index: avSurvSlotConfigIndex) | + .10 avSurvDs1Table | (index: avSurvDs1Index) | + .11 avSurvSigGroupTable | (index: avSurvSigGroupIndex) | + .12 avSurvBriTable | (index: avSurvBriIndex) | + .13 avSurvIncomingRoutingTable | (indexes: avSurvIncomingRoutingGroupRefNumber, | avSurvIncomingRoutingIndex) | + .14 avSurvNfasTable | (indexes: avSurvNfasSigGroupRefNumber, | avSurvNfasIndex) | + .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex. | Change avSurvBriIndex to be 1..64 instead of 1..24. " ::= { avGatewayMibs 4 } -- 1.3.6.1.4.1.6889.2.6.4.0 avSurvNotification OBJECT IDENTIFIER ::= { avSurvMib 0 } -- 1.3.6.1.4.1.6889.2.6.4.0.1 avSurvEnabled NOTIFICATION-TYPE OBJECTS { avSurvNotificationSeverity } STATUS current DESCRIPTION "This trap indicates that survivability.o has been administratively enabled." ::= { avSurvNotification 1 } -- 1.3.6.1.4.1.6889.2.6.4.0.2 avSurvDisabled NOTIFICATION-TYPE OBJECTS { avSurvNotificationSeverity } STATUS current DESCRIPTION "This trap indicates that survivability.o has been administratively disabled." ::= { avSurvNotification 2 } -- 1.3.6.1.4.1.6889.2.6.4.0.3 avSurvActive NOTIFICATION-TYPE OBJECTS { avSurvNotificationSeverity } STATUS current DESCRIPTION "This trap indicates that survivability.o is now the call controller of record and is processing calls." ::= { avSurvNotification 3 } -- 1.3.6.1.4.1.6889.2.6.4.0.4 avSurvInactive NOTIFICATION-TYPE OBJECTS { avSurvNotificationSeverity } STATUS current DESCRIPTION "This trap indicates that survivability.o has stopped processing calls. A more powerful controller may have taken over, either an LSP or a primary call controller." ::= { avSurvNotification 4 } -- 1.3.6.1.4.1.6889.2.6.4.1 avSurvConfig OBJECT IDENTIFIER ::= { avSurvMib 1 } -- 1.3.6.1.4.1.6889.2.6.4.1.1 avSurvAdminState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows craft or PIM to enable the SLS call engine or read its current state" ::= { avSurvConfig 1 } -- 1.3.6.1.4.1.6889.2.6.4.1.2 avSurvStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational status of SLS call engine" ::= { avSurvConfig 2 } -- 1.3.6.1.4.1.6889.2.6.4.1.3 avSurvMaxIPReg OBJECT-TYPE SYNTAX Integer32 (1..240) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum IP phone registrations allowed. Gateway SLS firmware will restrict per model. G250 R3.0 = 10; G250 R3.1 and R4.0 = 12; G350 R4.0 = 72; IG550 [Juniper gateways(4350, 6350) R4.0 = 100; IG550 [Juniper gateways(2320, 2350) R4.1 = 100; G450 R4.1 =240 G430 = 150" ::= { avSurvConfig 3 } -- 1.3.6.1.4.1.6889.2.6.4.1.4 avSurvDateFormat OBJECT-TYPE SYNTAX INTEGER { mmDdYy (1), ddMmYy (2), yyMmDd (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Date Format. This is used for calendar/clock display on DCP & IP phones" ::= { avSurvConfig 4 } -- 1.3.6.1.4.1.6889.2.6.4.1.5 avSurvEndDLTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Date/Timestamp of last download from PIM. This is written by PIM after it completes initialization of all configuration parameters" ::= { avSurvConfig 5 } -- 1.3.6.1.4.1.6889.2.6.4.1.6 avSurvNotificationSeverity OBJECT-TYPE SYNTAX INTEGER { cleared (1), indeterminate (2), critical (3), major (4), minor (5), warning (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Severity of last sent trap" ::= { avSurvConfig 6 } -- 1.3.6.1.4.1.6889.2.6.4.1.7 avSurvConfigCommand OBJECT-TYPE SYNTAX INTEGER { clear (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear Running Configuration Command, write only" ::= { avSurvConfig 7 } -- 1.3.6.1.4.1.6889.2.6.4.1.8 avSurvGatewayNumber OBJECT-TYPE SYNTAX Integer32 (1..250) MAX-ACCESS read-only STATUS current DESCRIPTION "Gateway Identification Number (see CM Media Gateway form)" ::= { avSurvConfig 8 } -- 1.3.6.1.4.1.6889.2.6.4.1.9 avSurvPimLockout OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows Craft to prevent PIM updates from being downloaded during local diagnostic session" ::= { avSurvConfig 9 } -- 1.3.6.1.4.1.6889.2.6.4.1.10 avSurvAttendantAccessCode OBJECT-TYPE SYNTAX DisplayString (SIZE (1..3)) MAX-ACCESS read-create STATUS current DESCRIPTION "Allows a station in the branch office to be able to directly dial an attendant position" ::= { avSurvConfig 10 } -- 1.3.6.1.4.1.6889.2.6.4.1.11 avSurvAttendantExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (1..13)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the station which shall serve as the branch office attendant position. Used as destination to direct un-routable incoming trunk calls." ::= { avSurvConfig 11 } -- 1.3.6.1.4.1.6889.2.6.4.2 avSurvStationTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Table" ::= { avSurvMib 2 } -- 1.3.6.1.4.1.6889.2.6.4.2.1 avSurvStationEntry OBJECT-TYPE SYNTAX AvSurvStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name" INDEX { avSurvStationIndex } ::= { avSurvStationTable 1 } AvSurvStationEntry ::= SEQUENCE { avSurvStationIndex Integer32, avSurvStationExt DisplayString, avSurvStationType INTEGER, avSurvStationInterfaceIndex Integer32, avSurvStationCOR INTEGER, avSurvStationTrunkDest TruthValue, avSurvStationRowStatus RowStatus, avSurvStationExpansionModule TruthValue, avSurvStationSlotPort DisplayString, avSurvStationSwitchHookFlash TruthValue, avSurvStationIpAddressRegistered OCTET STRING, avSurvStationName DisplayString } -- 1.3.6.1.4.1.6889.2.6.4.2.1.1 avSurvStationIndex OBJECT-TYPE SYNTAX Integer32 (1..340) MAX-ACCESS read-create STATUS current DESCRIPTION "Station Table Index" ::= { avSurvStationEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.2 avSurvStationExt OBJECT-TYPE SYNTAX DisplayString (SIZE (1..13)) MAX-ACCESS read-create STATUS current DESCRIPTION "Station Extension number" ::= { avSurvStationEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.3 avSurvStationType OBJECT-TYPE SYNTAX INTEGER { ip4601 (1), ip4602 (2), ip4602Sw (3), ip4606 (4), ip4610Sw (5), ip4612 (6), ip4620 (7), ip4620Sw (8), ip4624 (9), analog2500 (10), ip4621 (11), ip4622 (12), ip4625 (13), dcp2402 (20), dcp2410 (21), dcp2420 (22), dcp6402 (30), dcp6402D (31), dcp6408 (32), dcp6408plus (33), dcp6408D (34), dcp6408Dplus (35), dcp6416Dplus (36), dcp6424Dplus (37), dcp8403B (40), dcp8405B (41), dcp8405Bplus (42), dcp8405D (43), dcp8405Dplus (44), dcp8410B (45), dcp8410D (46), dcp8411B (47), dcp8411D (48), dcp8434D (49) } MAX-ACCESS read-create STATUS current DESCRIPTION "Station model type" ::= { avSurvStationEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.4 avSurvStationInterfaceIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type. Note: This element has been deprecated in SLS R4.1. For legacy stations, use avSurvStationSlotPort to communicate slot-port info." ::= { avSurvStationEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.5 avSurvStationCOR OBJECT-TYPE SYNTAX INTEGER { emergency (1), internal (2), local (3), toll (4), unrestricted (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Station Class of Outgoing Restriction (COR) level" ::= { avSurvStationEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.6 avSurvStationTrunkDest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Station trunk destination. Can be used to answer incomming trunk calls" ::= { avSurvStationEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.7 avSurvStationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry" ::= {avSurvStationEntry 7 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.8 avSurvStationExpansionModule OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Station set has an expansion module in place. This is only allowed for the digital phones (IP and DCP. IP phone models 4620, 4621, 4625 may use EU24 and EU24BL. DCP phone models 2420 may use EU24 and EU24BL. DCP phone models 6416 and 6424 may use modesl 801A and XM24." ::= {avSurvStationEntry 8 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.9 avSurvStationSlotPort OBJECT-TYPE SYNTAX DisplayString (SIZE (4..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "CM slot/port in the Vyxx format" ::= {avSurvStationEntry 9 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.10 avSurvStationSwitchHookFlash OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Switchhook flash is allowed only for analog phones" ::= {avSurvStationEntry 10 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.11 avSurvStationIpAddressRegistered OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of registered IP station. Note only for IP stations" ::= {avSurvStationEntry 11 } -- 1.3.6.1.4.1.6889.2.6.4.2.1.12 avSurvStationName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..27)) MAX-ACCESS read-create STATUS current DESCRIPTION "Station or user's Name" ::= { avSurvStationEntry 12 } -- 1.3.6.1.4.1.6889.2.6.4.3 avSurvTrunkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvTrunkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group Table" ::= { avSurvMib 3 } -- 1.3.6.1.4.1.6889.2.6.4.3.1 avSurvTrunkGroupEntry OBJECT-TYPE SYNTAX AvSurvTrunkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode" INDEX { avSurvTrunkGroupNum } ::= { avSurvTrunkGroupTable 1 } AvSurvTrunkGroupEntry ::= SEQUENCE { avSurvTrunkGroupNum INTEGER, avSurvTrunkGroupType INTEGER, avSurvTrunkGroupTAC DisplayString, avSurvTrunkGroupDial INTEGER, avSurvTrunkGroupRowStatus RowStatus, avSurvTrunkGroupDidDigitTreatment INTEGER, avSurvTrunkGroupDidDigitsInsert DisplayString, avSurvTrunkGroupDidSupervision INTEGER, avSurvTrunkGroupName DisplayString, avSurvTrunkGroupCodesetDisplay INTEGER, avSurvTrunkGroupCodesetNational INTEGER, avSurvTrunkGroupChannelPreference INTEGER, avSurvTrunkGroupDigitHandling INTEGER, avSurvTrunkGroupJapanDisconnect INTEGER, avSurvTrunkGroupSendName INTEGER, avSurvTrunkGroupSendCallingNumber INTEGER, avSurvTrunkGroupNumberingFormat INTEGER, avSurvTrunkGroupIncomingDestination DisplayString, avSurvTrunkGroupIncomingDialTone INTEGER, avSurvTrunkGroupR2MFCSignaling INTEGER, avSurvTrunkGroupTrunkHunt INTEGER, avSurvTrunkGroupDs1Supervision INTEGER, avSurvTrunkGroupCbc INTEGER, avSurvTrunkGroupCbcServiceFeature INTEGER, avSurvTrunkGroupCbcParameter INTEGER, avSurvTrunkGroupBusyDisconnect INTEGER } -- 1.3.6.1.4.1.6889.2.6.4.3.1.1 avSurvTrunkGroupNum OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Number" ::= { avSurvTrunkGroupEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.2 avSurvTrunkGroupType OBJECT-TYPE SYNTAX INTEGER { analogLoopStart (1), analogDid (2), analogGroundStart (3), bri (4), t1InBandSignaling (5), t1IsdnSignaling (6), e1InBandSignaling (7), e1IsdnSignaling (8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Type" ::= { avSurvTrunkGroupEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.3 avSurvTrunkGroupTAC OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Trunk Access Code (TAC)" ::= { avSurvTrunkGroupEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.4 avSurvTrunkGroupDial OBJECT-TYPE SYNTAX INTEGER { rotary (1), dtmf (2), mf (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Outward Dial. Note MF not supported in SLS" ::= { avSurvTrunkGroupEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.5 avSurvTrunkGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry" ::= {avSurvTrunkGroupEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.6 avSurvTrunkGroupDidDigitTreatment OBJECT-TYPE SYNTAX INTEGER { absorb1 (1), absorb2 (2), absorb3 (3), absorb4 (4), absorb5 (5), insert1 (11), insert2 (12), insert3 (13), insert4 (14), blank (99) } MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group DID digit treatment option. This applies for analog DID trunks and non-ISDN digital tie trunks. Note: blank means take no action." ::= { avSurvTrunkGroupEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.7 avSurvTrunkGroupDidDigitsInsert OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "Digit string to be inserted for DID treatment This applies for analog DID trunks and non-ISDN digital tie trunks." ::= { avSurvTrunkGroupEntry 7 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.8 avSurvTrunkGroupDidSupervision OBJECT-TYPE SYNTAX INTEGER { immediate (1), wink (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of incoming supervision used on DID trunk. This applies only for analog DID trunks." ::= { avSurvTrunkGroupEntry 8 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.9 avSurvTrunkGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..27)) MAX-ACCESS read-create STATUS current DESCRIPTION "Customer's name for trunk group" ::= { avSurvTrunkGroupEntry 9 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.10 avSurvTrunkGroupCodesetDisplay OBJECT-TYPE SYNTAX INTEGER { codeset0 (0), codeset6 (6), codeset7 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Which Q.931 codesets are allowed to send Display IE's to the user phones This applies only to ISDN BRI/PRI trunks." ::= { avSurvTrunkGroupEntry 10 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.11 avSurvTrunkGroupCodesetNational OBJECT-TYPE SYNTAX INTEGER { codeset6 (6), codeset7 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Which codesets are allowed to send National supported IE's. This applies only to ISDN BRI/PRI trunks." ::= { avSurvTrunkGroupEntry 11 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.12 avSurvTrunkGroupChannelPreference OBJECT-TYPE SYNTAX INTEGER { exclusive (1), preferred (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Used for encoding Channel-ID IE. This applies only to ISDN BRI/PRI trunks." ::= { avSurvTrunkGroupEntry 12 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.13 avSurvTrunkGroupDigitHandling OBJECT-TYPE SYNTAX INTEGER { enblocEnbloc (0), enblocOverlap (1), overlapEnbloc (2), overlapOverlap (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks." ::= { avSurvTrunkGroupEntry 13 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.14 avSurvTrunkGroupJapanDisconnect OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Send a Q.931 CONNECT msg right before sending DISCONNECT msg. This applies only to ISDN BRI/PRI trunks in Japan." ::= { avSurvTrunkGroupEntry 14 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.15 avSurvTrunkGroupSendName OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), restricted (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether Calling, Connected, Called party's name is to be shared with network. This applies only to ISDN BRI/PRI trunks. Default is no." ::= { avSurvTrunkGroupEntry 15 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.16 avSurvTrunkGroupSendCallingNumber OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), restricted (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. Default is no." ::= { avSurvTrunkGroupEntry 16 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.17 avSurvTrunkGroupNumberingFormat OBJECT-TYPE SYNTAX INTEGER { unknown (1), public (2), private (3), unknownPrivate (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. SLS only supports unknown(1) and public(2). Default is unknown." ::= { avSurvTrunkGroupEntry 17 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.18 avSurvTrunkGroupIncomingDestination OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) MAX-ACCESS read-create STATUS current DESCRIPTION " Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls" ::= { avSurvTrunkGroupEntry 18 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.19 avSurvTrunkGroupIncomingDialTone OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure" ::= { avSurvTrunkGroupEntry 19 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.20 avSurvTrunkGroupR2MFCSignaling OBJECT-TYPE SYNTAX INTEGER { set1 (1), set2 (2), set3 (3), set4 (4), set5 (5), set6 (6), set7 (7), set8 (8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines MFC signaling set to be used. This only applies to R2MFC trunks. This feature not supported in SLS for R4.0" ::= { avSurvTrunkGroupEntry 20 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.21 avSurvTrunkGroupTrunkHunt OBJECT-TYPE SYNTAX INTEGER { ascend (1), cyclical (2), descend (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines the method in which the SLS call engine selects from the trunk group pool of available trunks. This only applies to digital trunks." ::= { avSurvTrunkGroupEntry 21 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.22 avSurvTrunkGroupDs1Supervision OBJECT-TYPE SYNTAX INTEGER { loopStart (3), groundStart (4), winkWink (5), winkImmediate (6), winkAuto (7), immediateImmediate (8), autoAuto (9), autoWink (10) } MAX-ACCESS read-create STATUS current DESCRIPTION "Applies to non-ISDN DS1 trunks: Specifies the type of incomming/outgoing supervision that is used on these trunks." ::= { avSurvTrunkGroupEntry 22 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.23 avSurvTrunkGroupCbc OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Applies to ISDN DS1 trunks: Specifies whether the trunk is to operate in call-by-call basis. If yes, then send the NSF IE." ::= { avSurvTrunkGroupEntry 23 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.24 avSurvTrunkGroupCbcServiceFeature OBJECT-TYPE SYNTAX INTEGER { sdn (225), megacom (227), operator (197), suboperator (198), lds (231), scocs (246) } MAX-ACCESS read-create STATUS current DESCRIPTION "Applies to ISDN DS1 trunks: Specifies the type of service or feature specifed in the NSF IE for outbound trunk calls. Only valid if CBC=yes." ::= { avSurvTrunkGroupEntry 24 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.25 avSurvTrunkGroupCbcParameter OBJECT-TYPE SYNTAX INTEGER (0..99999) MAX-ACCESS read-create STATUS current DESCRIPTION "Applies to ISDN DS1 trunks: Specifies the class of service being offered as part of Selective Class of Call Selection (scocs)service mode. Only valid if service mode is scocs." ::= { avSurvTrunkGroupEntry 25 } -- 1.3.6.1.4.1.6889.2.6.4.3.1.26 avSurvTrunkGroupBusyDisconnect OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Applies to Analog Loop Start Trunks: Specifies whether the presence of busy tone signal will cause the trunk call to be disconnected. Default = no." ::= { avSurvTrunkGroupEntry 26 } -- 1.3.6.1.4.1.6889.2.6.4.4 avSurvTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk table" ::= { avSurvMib 4 } -- 1.3.6.1.4.1.6889.2.6.4.4.1 avSurvTrunkEntry OBJECT-TYPE SYNTAX AvSurvTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number" INDEX { avSurvTrunkGroupRefNumber, avSurvTrunkIndex } ::= { avSurvTrunkTable 1 } AvSurvTrunkEntry ::= SEQUENCE { avSurvTrunkGroupRefNumber INTEGER, avSurvTrunkIndex Integer32, avSurvTrunkInterfaceIndex Integer32, avSurvTrunkRowStatus RowStatus, avSurvTrunkSlotPort DisplayString, avSurvTrunkSigGroupRefNumber INTEGER } -- 1.3.6.1.4.1.6889.2.6.4.4.1.1 avSurvTrunkGroupRefNumber OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Pool Group Reference Number - Association of trunk pool with trunk group" ::= { avSurvTrunkEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.4.1.2 avSurvTrunkIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "trunk table index" ::= { avSurvTrunkEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.4.1.3 avSurvTrunkInterfaceIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type Note: This element has been deprecated in SLS R4.1. For legacy trunks, use avSurvTrunkSlotPort to communicate slot-port info." ::= { avSurvTrunkEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.4.1.4 avSurvTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry" ::= {avSurvTrunkEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.4.1.5 avSurvTrunkSlotPort OBJECT-TYPE SYNTAX DisplayString (SIZE(4..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "ACM slot/port in the Vyxx format" ::= {avSurvTrunkEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.4.1.6 avSurvTrunkSigGroupRefNumber OBJECT-TYPE SYNTAX INTEGER (1..650) MAX-ACCESS read-create STATUS current DESCRIPTION "Signaling Group Number that is the manager of this ISDN trunk member" ::= { avSurvTrunkEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.5 avSurvArsTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvArsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Automatic Route Selection (ARS) Table" ::= { avSurvMib 5 } -- 1.3.6.1.4.1.6889.2.6.4.5.1 avSurvArsEntry OBJECT-TYPE SYNTAX AvSurvArsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length" INDEX { avSurvDialIndex } ::= { avSurvArsTable 1 } AvSurvArsEntry ::= SEQUENCE { avSurvDialIndex Integer32, avSurvDialString DisplayString, avSurvDialType INTEGER, avSurvDialMaximumLength INTEGER, avSurvDialGroupRefNumber INTEGER, avSurvDialAction INTEGER, avSurvDialRowStatus RowStatus, avSurvDialDeleteDigits INTEGER, avSurvDialInsertDigits DisplayString, avSurvDialMinimumLength INTEGER } -- 1.3.6.1.4.1.6889.2.6.4.5.1.1 avSurvDialIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "Call Pattern index" ::= { avSurvArsEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.2 avSurvDialString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..18)) MAX-ACCESS read-create STATUS current DESCRIPTION "Dialed string entry that is used to match a pattern within the user-dialed number" ::= { avSurvArsEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.3 avSurvDialType OBJECT-TYPE SYNTAX INTEGER { emergency (1), foreignNumberingPlanArea (2), homeNumberingPlanArea (3), international (4), internationalOperator (5), local (6), national (7), operator (8), service (9) } MAX-ACCESS read-create STATUS current DESCRIPTION "Call Type" ::= { avSurvArsEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.4 avSurvDialMaximumLength OBJECT-TYPE SYNTAX INTEGER (1..28) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the dialed string" ::= { avSurvArsEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.5 avSurvDialGroupRefNumber OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "Call group reference number" ::= { avSurvArsEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.6 avSurvDialAction OBJECT-TYPE SYNTAX INTEGER { denyCall (1), allowCall (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Call dial action" ::= { avSurvArsEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.7 avSurvDialRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry" ::= {avSurvArsEntry 7 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.8 avSurvDialDeleteDigits OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the number of dialed digits to be deleted from the beginning of the string" ::= { avSurvArsEntry 8 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.9 avSurvDialInsertDigits OBJECT-TYPE SYNTAX DisplayString (SIZE (0..36)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the digit string to be inserted. Includes ',' for pause." ::= { avSurvArsEntry 9 } -- 1.3.6.1.4.1.6889.2.6.4.5.1.10 avSurvDialMinimumLength OBJECT-TYPE SYNTAX INTEGER (1..28) MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the avSurvDialString element" ::= { avSurvArsEntry 10 } -- 1.3.6.1.4.1.6889.2.6.4.6 avSurvFacTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvFacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Automatic Route Selection Facility Table" ::= { avSurvMib 6 } -- 1.3.6.1.4.1.6889.2.6.4.6.1 avSurvFacEntry OBJECT-TYPE SYNTAX AvSurvFacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains index, an ARS Facility dialing code and the Type of FAC feature" INDEX { avSurvFacIndex } ::= { avSurvFacTable 1 } AvSurvFacEntry ::= SEQUENCE { avSurvFacIndex Integer32, avSurvFacId DisplayString, avSurvFacRowStatus RowStatus, avSurvFacType INTEGER } -- 1.3.6.1.4.1.6889.2.6.4.6.1.1 avSurvFacIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-create STATUS current DESCRIPTION "Fac Index" ::= { avSurvFacEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.6.1.2 avSurvFacId OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "ARS Facility dialing code" ::= { avSurvFacEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.6.1.3 avSurvFacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry" ::= { avSurvFacEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.6.1.4 avSurvFacType OBJECT-TYPE SYNTAX INTEGER { ars1 (1), ars2 (2), hold (3), contactOpen (4), contactClose (5), contactPulse (6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Feature Access Code(FAC) dial codes Supported" ::= { avSurvFacEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.1.7 avSurvIpVoiceCodecSetTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvIpVoiceCodecSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip Voice Codec Set Table" ::= { avSurvMib 7 } -- 1.3.6.1.4.1.6889.2.6.4.7.1 avSurvIpVoiceCodecSetEntry OBJECT-TYPE SYNTAX AvSurvIpVoiceCodecSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames" INDEX { avSurvIpVoiceCodecSetNum, avSurvIpVoiceCodecSetIndex } ::= { avSurvIpVoiceCodecSetTable 1 } AvSurvIpVoiceCodecSetEntry ::= SEQUENCE { avSurvIpVoiceCodecSetNum Integer32, avSurvIpVoiceCodecSetIndex Integer32, avSurvIpVoiceCodecSetPriority INTEGER, avSurvIpVoiceCodecSetType INTEGER, avSurvIpVoiceCodecSetSilence TruthValue, avSurvIpVoiceCodecSetFrames INTEGER, avSurvIpVoiceCodecSetRowStatus RowStatus } -- 1.3.6.1.4.1.6889.2.6.4.7.1.1 avSurvIpVoiceCodecSetNum OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Ip Codec Set Identification" ::= { avSurvIpVoiceCodecSetEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.7.1.2 avSurvIpVoiceCodecSetIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Ip Codec Index" ::= { avSurvIpVoiceCodecSetEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.7.1.3 avSurvIpVoiceCodecSetPriority OBJECT-TYPE SYNTAX INTEGER (1 .. 7) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority of codec set type (determines preferential use)" ::= { avSurvIpVoiceCodecSetEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.7.1.4 avSurvIpVoiceCodecSetType OBJECT-TYPE SYNTAX INTEGER { g711u (1), g711a (2), g723 (3), g729 (4), g729a (5), g729b (6), g729ab (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ip Codec Type" ::= { avSurvIpVoiceCodecSetEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.7.1.5 avSurvIpVoiceCodecSetSilence OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "IP Codec Silence Suppression" ::= { avSurvIpVoiceCodecSetEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.7.1.6 avSurvIpVoiceCodecSetFrames OBJECT-TYPE SYNTAX INTEGER (1..6) MAX-ACCESS read-create STATUS current DESCRIPTION "IP Codec number of frames" ::= { avSurvIpVoiceCodecSetEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.1.7.1.7 avSurvIpVoiceCodecSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry" ::= { avSurvIpVoiceCodecSetEntry 7 } -- 1.3.6.1.4.1.6889.2.6.4.8 avSurvIpCodecSetConfig OBJECT IDENTIFIER ::= { avSurvMib 8 } -- 1.3.6.1.4.1.6889.2.6.4.8.1 avSurvIpCodecSetFaxMode OBJECT-TYPE SYNTAX INTEGER { off (1), relay (2), passthru (3), t38 (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Fax operational protocol mode" ::= { avSurvIpCodecSetConfig 1 } -- 1.3.6.1.4.1.6889.2.6.4.8.2 avSurvIpCodecSetFaxRedundancy OBJECT-TYPE SYNTAX INTEGER (0 .. 3) MAX-ACCESS read-create STATUS current DESCRIPTION " Redundant packets encoded during fax mode" ::= { avSurvIpCodecSetConfig 2 } -- 1.3.6.1.4.1.6889.2.6.4.8.3 avSurvIpCodecSetModemMode OBJECT-TYPE SYNTAX INTEGER { off (1), relay (2), passthru (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Data modem protocol mode" ::= { avSurvIpCodecSetConfig 3 } -- 1.3.6.1.4.1.6889.2.6.4.8.4 avSurvIpCodecSetModemRedundancy OBJECT-TYPE SYNTAX INTEGER (0 .. 3) MAX-ACCESS read-create STATUS current DESCRIPTION " Redundant packets encoded for Modem mode" ::= { avSurvIpCodecSetConfig 4 } -- 1.3.6.1.4.1.6889.2.6.4.8.5 avSurvIpCodecSetTtyMode OBJECT-TYPE SYNTAX INTEGER { off (1), us (2), uk (3), passthru (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "TTY protocol mode" ::= { avSurvIpCodecSetConfig 5 } -- 1.3.6.1.4.1.6889.2.6.4.8.6 avSurvIpCodecSetTtyRedundancy OBJECT-TYPE SYNTAX INTEGER (0 .. 3) MAX-ACCESS read-create STATUS current DESCRIPTION "Redundant packets encoded for TTY mode" ::= { avSurvIpCodecSetConfig 6 } -- 1.3.6.1.4.1.6889.2.6.4.8.7 avSurvIpCodecSetClearChanMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Clear channel protocol mode. Preference for G711 wrapping" ::= { avSurvIpCodecSetConfig 7 } -- 1.3.6.1.4.1.6889.2.6.4.8.8 avSurvIpCodecSetClearChanRedundancy OBJECT-TYPE SYNTAX INTEGER (0 .. 1) MAX-ACCESS read-create STATUS current DESCRIPTION "Redundant packets encoded for clear channel mode" ::= { avSurvIpCodecSetConfig 8 } -- 1.3.6.1.4.1.6889.2.6.4.8.9 avSurvIpCodecSetEncryptPriority1 OBJECT-TYPE SYNTAX INTEGER { aes (1), aea (2), none (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Media Encryption type - 1st priority" ::= { avSurvIpCodecSetConfig 9 } -- 1.3.6.1.4.1.6889.2.6.4.8.10 avSurvIpCodecSetEncryptPriority2 OBJECT-TYPE SYNTAX INTEGER { aes (1), aea (2), none (3), unused (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Media Encryption type - 2nd priority " ::= { avSurvIpCodecSetConfig 10 } -- 1.3.6.1.4.1.6889.2.6.4.8.11 avSurvIpCodecSetEncryptPriority3 OBJECT-TYPE SYNTAX INTEGER { aes (1), aea (2), none (3), unused (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Media Encryption type - 3rd priority" ::= { avSurvIpCodecSetConfig 11 } -- 1.3.6.1.4.1.6889.2.6.4.9 avSurvSlotConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvSlotConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot Configuration Table" ::= { avSurvMib 9 } -- 1.3.6.1.4.1.6889.2.6.4.9.1 avSurvSlotConfigEntry OBJECT-TYPE SYNTAX AvSurvSlotConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains an index, number id, board type, and row status" INDEX { avSurvSlotConfigIndex } ::= { avSurvSlotConfigTable 1 } AvSurvSlotConfigEntry ::= SEQUENCE { avSurvSlotConfigIndex Integer32, avSurvSlotConfigNumberId DisplayString, avSurvSlotConfigBoardType INTEGER, avSurvSlotConfigRowStatus RowStatus } -- 1.3.6.1.4.1.6889.2.6.4.9.1.1 avSurvSlotConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "Slot Config Table Index" ::= { avSurvSlotConfigEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.9.1.2 avSurvSlotConfigNumberId OBJECT-TYPE SYNTAX DisplayString (SIZE (2)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1" ::= { avSurvSlotConfigEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.9.1.3 avSurvSlotConfigBoardType OBJECT-TYPE SYNTAX INTEGER { mm312 (32), mm710 (5), mm711 (4), mm712 (3), mm714 (7), mm716 (22), mm717 (14), mm720 (2), mm722 (8), anaImm1t2l (9), anaImm4t2l (16), briImm (17), dcpImm (18), ds1Imm (19), tgm550 (23), tim508 (29), tim510 (25), tim514 (24), tim516 (30), tim518 (31), tim521 (26) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of media module in the associated slot mm312 has 24 low-density DCP station ports mm710 has one DS1 interface mm711 has 8 port universal analog mm712 has 8 DCP station ports mm714 has 4 analog trunk ports and 4 analog station ports mm716 has 24 high-density analog station ports mm717 has 24 high-density DCP station ports mm720 has 8 bri trunk ports (16 channels) mm722 has 2 bri trunk ports (4 channels) anaImm1t2l is G250 Internal media module 1 Analog Trunk + 2 Analog Lines anaImm4t2l is G250 Internal media module 4 Analog Trunks + 2 Analog Lines briImm is G250 Internal media module 2 port BRI dcpImm is G250 Internal media module 12 port DCP ds1Imm is G250 Internal media module DS1 tgm550 is IG550 telephony gateway module with 2 Analog Trunks + 2 Analog Lines tim508 is IG550 telephony interface module 8 analog station ports tim510 is IG550 telephony interface module DS1 tim514 is IG550 telephony interface module 4 Analog Trunks + 2 Analog stations tim516 is IG550 telephony interface module 16 analog station ports tim518 is IG550 telephony interface module 8 analog stations and 8 analog trunks tim521 is IG550 telephony interface module 4 port BRI" ::= { avSurvSlotConfigEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.9.1.4 avSurvSlotConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry in this table" ::= { avSurvSlotConfigEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.1.10 avSurvDs1Table OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DS1 trunk instantiation Table" ::= { avSurvMib 10 } -- 1.3.6.1.4.1.6889.2.6.4.10.1 avSurvDs1Entry OBJECT-TYPE SYNTAX AvSurvDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id. " INDEX { avSurvDs1Index } ::= { avSurvDs1Table 1 } AvSurvDs1Entry ::= SEQUENCE { avSurvDs1Index Integer32, avSurvDs1Name DisplayString, avSurvDs1BitRate INTEGER, avSurvDs1SignalingMode INTEGER, avSurvDs1ChannelNumbering INTEGER, avSurvDs1Connect INTEGER, avSurvDs1Interface INTEGER, avSurvDs1Side INTEGER, avSurvDs1CountryProtocol INTEGER, avSurvDs1ProtocolVersion INTEGER, avSurvDs1BearerCapability INTEGER, avSurvDs1InterfaceCompanding INTEGER, avSurvDs1LongTimer INTEGER, avSurvDs1RowStatus RowStatus, avSurvDs1SlotNumberId DisplayString } -- 1.3.6.1.4.1.6889.2.6.4.10.1.1 avSurvDs1Index OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "DS1 Table Index" ::= { avSurvDs1Entry 1 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.2 avSurvDs1Name OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the service provider and/or site destination of DS1 facility" ::= { avSurvDs1Entry 2 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.3 avSurvDs1BitRate OBJECT-TYPE SYNTAX INTEGER { rate1544 (1), rate2048 (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum transmission rate for DS1 interface" ::= { avSurvDs1Entry 3 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.4 avSurvDs1SignalingMode OBJECT-TYPE SYNTAX INTEGER { cas (1), robbedBit (2), isdnPri (3), isdnExt (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Selects the signaling method deployed on the given DS1 facility" ::= { avSurvDs1Entry 4 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.5 avSurvDs1ChannelNumbering OBJECT-TYPE SYNTAX INTEGER { sequential (1), timeSlot (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Channel numbering scheme; E1 interface for ETSI and QSIG requires sequential encoding from 1 to 30" ::= { avSurvDs1Entry 5 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.6 avSurvDs1Connect OBJECT-TYPE SYNTAX INTEGER { host (1), network (2), pbx (3), lineSide (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies what type of equipment is at the far end of the DS1 link" ::= { avSurvDs1Entry 6 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.7 avSurvDs1Interface OBJECT-TYPE SYNTAX INTEGER { user (0), network (1), peerMaster (3), peerSlave (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines glare handling" ::= { avSurvDs1Entry 7 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.8 avSurvDs1Side OBJECT-TYPE SYNTAX INTEGER { a (0), b (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "QSIG glare handling when interface field is peerSlave" ::= { avSurvDs1Entry 8 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.9 avSurvDs1CountryProtocol OBJECT-TYPE SYNTAX INTEGER { country1 (1), country2 (2), country3 (3), country4 (4), country5 (5), country6 (6), country7 (7), country8 (8), country9 (9), country10 (10), country11 (11), country12 (12), country13 (13), country14 (14), country15 (15), country16 (16), country17 (17), country18 (18), country19 (19), country20 (20), country21 (21), country22 (22), country23 (23), country24 (24), country25 (25), etsi (62), qsig (63) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the Layer 3 signaling protocol used by the country-specific service provider. This applies to ISDN trunk." ::= { avSurvDs1Entry 9 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.10 avSurvDs1ProtocolVersion OBJECT-TYPE SYNTAX INTEGER { a (0), b (1), c (2), d (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Used in countries whose public networks allow multiple Layer-3 signaling protocols for ISDN PRI service." ::= { avSurvDs1Entry 10 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.11 avSurvDs1BearerCapability OBJECT-TYPE SYNTAX INTEGER { threeKhz (0), speech (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sets the information transfer capability in the Bearer Capability IE of SETUP message for ISDN PRI service." ::= { avSurvDs1Entry 11 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.12 avSurvDs1InterfaceCompanding OBJECT-TYPE SYNTAX INTEGER { alaw (1), ulaw (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the companding method used by the far-end switch" ::= { avSurvDs1Entry 12 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.13 avSurvDs1LongTimer OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether the duration of the T302 and T303 Q.931 timers should be extended to a longer duration. Used for Russia country code" ::= { avSurvDs1Entry 13 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.14 avSurvDs1RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry in this table" ::= { avSurvDs1Entry 14 } -- 1.3.6.1.4.1.6889.2.6.4.10.1.15 avSurvDs1SlotNumberId OBJECT-TYPE SYNTAX DisplayString (SIZE (2)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1" ::= { avSurvDs1Entry 15 } -- 1.3.6.1.4.1.6889.2.6.4.1.11 avSurvSigGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvSigGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Signaling Group, associated with an ISDN trunk group, Table" ::= { avSurvMib 11 } -- 1.3.6.1.4.1.6889.2.6.4.11.1 avSurvSigGroupEntry OBJECT-TYPE SYNTAX AvSurvSigGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains an index, channel selection, associated signaling, primary D channel, and row status" INDEX { avSurvSigGroupIndex } ::= { avSurvSigGroupTable 1 } AvSurvSigGroupEntry ::= SEQUENCE { avSurvSigGroupIndex Integer32, avSurvSigGroupChannelSelection INTEGER, avSurvSigGroupAssociatedSignaling INTEGER, avSurvSigGroupPrimaryDChannel DisplayString, avSurvSigGroupRowStatus RowStatus } -- 1.3.6.1.4.1.6889.2.6.4.11.1.1 avSurvSigGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..650) MAX-ACCESS read-create STATUS current DESCRIPTION "SigGroup Table Index" ::= { avSurvSigGroupEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.11.1.2 avSurvSigGroupChannelSelection OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "If there is more than one trunk group assigned to this signaling group, the channel selection number is the trunk group that can accept incoming calls" ::= { avSurvSigGroupEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.11.1.3 avSurvSigGroupAssociatedSignaling OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether the D-channel is physically associated in the DS1 facility, yes = D-channel present" ::= { avSurvSigGroupEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.11.1.4 avSurvSigGroupPrimaryDChannel OBJECT-TYPE SYNTAX DisplayString (SIZE (7)) MAX-ACCESS read-create STATUS current DESCRIPTION "The identity for the D-channel 3 digit gw number + 2 character slot number + 2 digit port circuit number" ::= { avSurvSigGroupEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.11.1.5 avSurvSigGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry in this table" ::= { avSurvSigGroupEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.1.12 avSurvBriTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvBriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BRI trunk instantiation Table" ::= { avSurvMib 12 } -- 1.3.6.1.4.1.6889.2.6.4.12.1 avSurvBriEntry OBJECT-TYPE SYNTAX AvSurvBriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains an index, name, interface, side, country-protocol, bearer-capability, interface-companding, tei-assignment, directory-numberA, directory-numberB, spidA, spidB, endpoint-initialization, layer1-stable, and slot-number-id. This table instantiation completely specifies a BRI circuit, consisting of channel B1 and channel B2" INDEX { avSurvBriIndex } ::= { avSurvBriTable 1 } AvSurvBriEntry ::= SEQUENCE { avSurvBriIndex Integer32, avSurvBriName DisplayString, avSurvBriInterface INTEGER, avSurvBriSide INTEGER, avSurvBriCountryProtocol INTEGER, avSurvBriBearerCapability INTEGER, avSurvBriInterfaceCompanding INTEGER, avSurvBriTeiAssignment INTEGER, avSurvBriDirectoryNumberA DisplayString, avSurvBriDirectoryNumberB DisplayString, avSurvBriSpidA DisplayString, avSurvBriSpidB DisplayString, avSurvBriEndpointInit INTEGER, avSurvBriLayer1Stable INTEGER, avSurvBriRowStatus RowStatus, avSurvBriSlotPortNumberId DisplayString } -- 1.3.6.1.4.1.6889.2.6.4.12.1.1 avSurvBriIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-create STATUS current DESCRIPTION "BRI Table Index Note: G250-BRI supports 2 ports (4-channels) G350/IG550 is allocated a max of 24 ports (48-channels) G430/G450 is allocated a max of 64 ports (128 channels). " ::= { avSurvBriEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.2 avSurvBriName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the service provider and/or site destination of BRI facility" ::= { avSurvBriEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.3 avSurvBriInterface OBJECT-TYPE SYNTAX INTEGER { user (0), network (1), peerMaster (3), peerSlave (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines glare handling. Non-QSIG calls: a-network, b-user; QSIG calls: a-peerMaster, b-peerSlave" ::= { avSurvBriEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.4 avSurvBriSide OBJECT-TYPE SYNTAX INTEGER { a (0), b (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "QSIG glare handling when interface field is peerSlave" ::= { avSurvBriEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.5 avSurvBriCountryProtocol OBJECT-TYPE SYNTAX INTEGER { country1 (1), country2 (2), country3 (3), country4 (4), country5 (5), country6 (6), country7 (7), country8 (8), country9 (9), country10 (10), country11 (11), country12 (12), country13 (13), country14 (14), country15 (15), country16 (16), country17 (17), country18 (18), country19 (19), country20 (20), country21 (21), country22 (22), country23 (23), country24 (24), country25 (25), etsi (62), qsig (63) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the Layer 3 signaling protocol used by the country-specific service provider" ::= { avSurvBriEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.6 avSurvBriBearerCapability OBJECT-TYPE SYNTAX INTEGER { threeKhz (0), speech (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sets the information transfer capability in the Bearer Capability IE of SETUP message" ::= { avSurvBriEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.7 avSurvBriInterfaceCompanding OBJECT-TYPE SYNTAX INTEGER { alaw (1), ulaw (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the companding method used )for all circuits on this media module) by the far-end switch" ::= { avSurvBriEntry 7 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.8 avSurvBriTeiAssignment OBJECT-TYPE SYNTAX INTEGER { auto (1), zero (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "LAPD address assignment for TEI field, auto is assigned by network provider" ::= { avSurvBriEntry 8 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.9 avSurvBriDirectoryNumberA OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Channel B1's directory number" ::= { avSurvBriEntry 9 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.10 avSurvBriDirectoryNumberB OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Channel B2's directory number" ::= { avSurvBriEntry 10 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.11 avSurvBriSpidA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) MAX-ACCESS read-create STATUS current DESCRIPTION "Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B1" ::= { avSurvBriEntry 11 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.12 avSurvBriSpidB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) MAX-ACCESS read-create STATUS current DESCRIPTION "Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B2" ::= { avSurvBriEntry 12 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.13 avSurvBriEndpointInit OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines whether the far end supports endpoint initialization" ::= { avSurvBriEntry 13 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.14 avSurvBriLayer1Stable OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Determines whether to expect the network to drop BRI layer 1 when no calls are active. yes = keep layer 1 stable" ::= { avSurvBriEntry 14 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.15 avSurvBriRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry in this table" ::= { avSurvBriEntry 15 } -- 1.3.6.1.4.1.6889.2.6.4.12.1.16 avSurvBriSlotPortNumberId OBJECT-TYPE SYNTAX DisplayString (SIZE (4..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the string identifier formed by the combination of the slot identifier that CM uses to identify the slot of the media gateway(first character is a v followed by one numeric character). The port consists of two numeric characters that identify the first B-channel of the physical BRI port circuit(for example the 1st port is always 01)." ::= { avSurvBriEntry 16 } -- 1.3.6.1.4.1.6889.2.6.4.1.13 avSurvIncomingRoutingTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvIncomingRoutingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Incoming Routing Table" ::= { avSurvMib 13 } -- 1.3.6.1.4.1.6889.2.6.4.13.1 avSurvIncomingRoutingEntry OBJECT-TYPE SYNTAX AvSurvIncomingRoutingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a dual index(trunk-group-reference-number and table index), match-pattern, delete-digits, insert-digits specification and routing-mode. This table instantiation completely specifies an the digit handling for an incoming dial-string pattern. Note 1: If the trunk-group employs Overlap Receiving, there will only be one entry (this may only have a delete or an insert operand). Note 2: If the trunk-group employs Enbloc Receiving, there may be a maximum of 50 entries. Each entry will have a Match-pattern, Length, Delete, and Insert element." INDEX { avSurvIncomingRoutingGroupRefNumber,avSurvIncomingRoutingIndex } ::= { avSurvIncomingRoutingTable 1 } AvSurvIncomingRoutingEntry ::= SEQUENCE { avSurvIncomingRoutingGroupRefNumber INTEGER, avSurvIncomingRoutingIndex Integer32, avSurvIncomingRoutingMatchPattern DisplayString, avSurvIncomingRoutingLength INTEGER, avSurvIncomingRoutingDeleteDigits INTEGER, avSurvIncomingRoutingInsertDigits DisplayString, avSurvIncomingRoutingMode INTEGER, avSurvIncomingRoutingRowStatus RowStatus } -- 1.3.6.1.4.1.6889.2.6.4.13.1.1 avSurvIncomingRoutingGroupRefNumber OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "Incoming trunk-group reference number" ::= { avSurvIncomingRoutingEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.2 avSurvIncomingRoutingIndex OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-create STATUS current DESCRIPTION "Incoming Routing Table Index" ::= { avSurvIncomingRoutingEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.3 avSurvIncomingRoutingMatchPattern OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Dial-string entry that is used to match a pattern on inbound trunk calls. Note that '0' is used to designate the blank or empty string value as a wild card match." ::= { avSurvIncomingRoutingEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.4 avSurvIncomingRoutingLength OBJECT-TYPE SYNTAX INTEGER { len0 (0), len1 (1), len2 (2), len3 (3), len4 (4), len5 (5), len6 (6), len7 (7), len8 (8), len9 (9), len10 (10), len11 (11), len12 (12), len13 (13), len14 (14), len15 (15), len16 (16), len17 (17), len18 (18), len19 (19), len20 (20), len21 (21), blank (99) } MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum length of the user-dialed number that the SLS call-engine collects before beginning the pattern matching. Note that CM uses the blank as a wild card, subject to rule of the MatchPattern field being set to a wild card value as well." ::= { avSurvIncomingRoutingEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.5 avSurvIncomingRoutingDeleteDigits OBJECT-TYPE SYNTAX INTEGER (0..21) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the number of dialed digits to be deleted from the beginning of the incoming trunk's received digit string" ::= { avSurvIncomingRoutingEntry 5 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.6 avSurvIncomingRoutingInsertDigits OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the digit string to be inserted (after the deletion process has been completed) to the incoming trunk digit string" ::= { avSurvIncomingRoutingEntry 6 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.7 avSurvIncomingRoutingMode OBJECT-TYPE SYNTAX INTEGER { enbloc (0), overlap (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks." ::= { avSurvIncomingRoutingEntry 7 } -- 1.3.6.1.4.1.6889.2.6.4.13.1.8 avSurvIncomingRoutingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry in this table" ::= { avSurvIncomingRoutingEntry 8 } -- 1.3.6.1.4.1.6889.2.6.4.1.14 avSurvNfasTable OBJECT-TYPE SYNTAX SEQUENCE OF AvSurvNfasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Signaling Group Nfas , associated with an ISDN trunk group, Table" ::= { avSurvMib 14 } -- 1.3.6.1.4.1.6889.2.6.4.14.1 avSurvNfasEntry OBJECT-TYPE SYNTAX AvSurvNfasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status" INDEX { avSurvNfasSigGroupRefNumber, avSurvNfasIndex } ::= { avSurvNfasTable 1 } AvSurvNfasEntry ::= SEQUENCE { avSurvNfasSigGroupRefNumber INTEGER, avSurvNfasIndex Integer32, avSurvNfasInterface DisplayString, avSurvNfasInterfaceId INTEGER, avSurvNfasRowStatus RowStatus } -- 1.3.6.1.4.1.6889.2.6.4.14.1.1 avSurvNfasSigGroupRefNumber OBJECT-TYPE SYNTAX INTEGER (1..650) MAX-ACCESS read-create STATUS current DESCRIPTION "Entry pointing to the associated signaling group number in the signaling group table" ::= { avSurvNfasEntry 1 } -- 1.3.6.1.4.1.6889.2.6.4.14.1.2 avSurvNfasIndex OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "Nfas Table Index" ::= { avSurvNfasEntry 2 } -- 1.3.6.1.4.1.6889.2.6.4.14.1.3 avSurvNfasInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (5)) MAX-ACCESS read-create STATUS current DESCRIPTION "The identity for the NFAS DS1 facility group: 3 digit gateway number + 2 character slot number" ::= { avSurvNfasEntry 3 } -- 1.3.6.1.4.1.6889.2.6.4.14.1.4 avSurvNfasInterfaceId OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-create STATUS current DESCRIPTION "For an NFAS circuit, this specifies the identification number of the DS1 circuit that is associated with this NFAS group. Note that this ID number must be coordinated with the PSTN provider so that the signaling protocol will operate correctly with respect to physical facility circuit selection." ::= { avSurvNfasEntry 4 } -- 1.3.6.1.4.1.6889.2.6.4.14.1.5 avSurvNfasRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create/Delete a row entry in this table" ::= { avSurvNfasEntry 5 } END