--**MOD+************************************************************************ --* Module: ARUBAWIRED-PROVIDER-BRIDGE-MIB.mib --* --* (c) Copyright 2021-2022 Hewlett Packard Enterprise Development LP --* All Rights Reserved. --* --* The contents of this software are proprietary and confidential --* to the Hewlett-Packard Development Company, L.P. No part of this --* program may be photocopied, reproduced, or translated into another --* programming language without prior written consent of the --* Hewlett-Packard Development Company, L.P. --* --* Purpose: This file contains MIB definition of ARUBAWIRED-PROVIDER-BRIDGE-MIB --* --**MOD-************************************************************************ ARUBAWIRED-PROVIDER-BRIDGE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF VlanId FROM Q-BRIDGE-MIB InterfaceIndex FROM IF-MIB wndFeatures FROM ARUBAWIRED-NETWORKING-OID; arubaWiredProviderBridgeMIB MODULE-IDENTITY LAST-UPDATED "202111120000Z" -- Nov 12, 2021 ORGANIZATION "HPE/Aruba Networking Division" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains the HPE 'version' of the standard Provider Bridge MIB and the proprietary extensions to it." REVISION "202111120000Z" -- Nov 12, 2021 DESCRIPTION "Initial revision." ::= { wndFeatures 23 } --********************************************************************** -- The ProviderBridge MIB Objects -- ********************************************************************** arubaWiredProviderBridgeNotifications OBJECT IDENTIFIER ::= { arubaWiredProviderBridgeMIB 0 } arubaWiredProviderBridgeObjects OBJECT IDENTIFIER ::= { arubaWiredProviderBridgeMIB 1 } arubaWiredProviderBridgeConformance OBJECT IDENTIFIER ::= { arubaWiredProviderBridgeMIB 2 } arubaWiredProviderBridgeBase OBJECT IDENTIFIER ::= { arubaWiredProviderBridgeObjects 0 } -- ********************************************************************** -- Scalar Objects -- ********************************************************************** -- This is a HPE specific define - where we can configure a device as a -- regular vlanBridge, s-vlan bridge, provider edge bridge or a vlanSvlanBridge. arubaWiredProviderBridgeType OBJECT-TYPE SYNTAX INTEGER { vlanBridge(1), svlanBridge(2), providerEdgeBridge(3), vlanSvlanBridge(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "arubaWiredProviderBridgeType controls bridge mode configuration. A device can function in one of the 4 modes defined above. vlanBridge - provider bridge feature disabled mode, all VLANs are cvlans. svlanBridge - provider bridge mode with only svlans. providerEdgeBridge - provider bridge mode with cvlans and svlans and mappings between them. vlanSvlanBridge - provider bridge mode with independent cvlans and svlans on the same device. Changing from one mode to another will empty out the current configuration information and reboot the device." DEFVAL { vlanBridge } ::= { arubaWiredProviderBridgeBase 1 } -- This is a HPE specific define - to configure the EtherType for Provider -- tagged frames. Applicable to s-vlan bridge, provider edge bridge or -- a vlanSvlanBridge. arubaWiredProviderBridgeEtherType OBJECT-TYPE SYNTAX Integer32 (1536..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the 2-byte ethertype for provider tagged frames. The default is 0x88a8. Changing from one tag-type to another with a given arubaWiredProviderBridgeType configuration will save current configurations and reboot the device, the new tag-type will take effect subsequently." DEFVAL { 34984 } ::= { arubaWiredProviderBridgeBase 2 } -- ********************************************************************** -- Tabular Objects -- ********************************************************************** -- ------------------------------------------------------------------------ -- VLAN Classification Table -- ------------------------------------------------------------------------ arubaWiredProviderBridgeVlanTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF ArubaWiredProviderBridgeVlanTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HPE proprietary table to classify a VLAN as a cvlan or an svlan" ::= { arubaWiredProviderBridgeBase 3} arubaWiredProviderBridgeVlanTypeEntry OBJECT-TYPE SYNTAX ArubaWiredProviderBridgeVlanTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for HPE Specific extension table" INDEX { arubaWiredProviderBridgeVlanTypeVlanID } ::= { arubaWiredProviderBridgeVlanTypeTable 1 } ArubaWiredProviderBridgeVlanTypeEntry ::= SEQUENCE { arubaWiredProviderBridgeVlanTypeVlanID VlanId, arubaWiredProviderBridgeVlanType INTEGER } arubaWiredProviderBridgeVlanTypeVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID to which this entry belongs." ::= { arubaWiredProviderBridgeVlanTypeEntry 1 } arubaWiredProviderBridgeVlanType OBJECT-TYPE SYNTAX INTEGER { cvlan(1), svlan(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the VLANtype." ::= { arubaWiredProviderBridgeVlanTypeEntry 2 } -- ------------------------------------------------------------------------ -- Provider Bridge Port Table -- ------------------------------------------------------------- arubaWiredProviderBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF ArubaWiredProviderBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This specifies the designated type of an externally accessible port on a Provider Bridge." ::= { arubaWiredProviderBridgeBase 4 } arubaWiredProviderBridgePortEntry OBJECT-TYPE SYNTAX ArubaWiredProviderBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that specifies the designated type of an externally accessible port on a Provider Bridge." INDEX { arubaWiredProviderBridgePortifIndex } ::= { arubaWiredProviderBridgePortTable 1 } ArubaWiredProviderBridgePortEntry ::= SEQUENCE { arubaWiredProviderBridgePortifIndex InterfaceIndex, arubaWiredProviderBridgePortType INTEGER } arubaWiredProviderBridgePortifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { arubaWiredProviderBridgePortEntry 1 } arubaWiredProviderBridgePortType OBJECT-TYPE SYNTAX INTEGER { customerEdge(1), customerNetwork(2), providerNetwork (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of an externally accessible port on a Provider Bridge. A customer-edge port is a C-VLAN component Port on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits frames for a single customer. Designating a port as a Customer Edge Port implies Provider Edge Bridge functionality and, specifically, the existence of a C-VLAN component associated with that port. This C-VLAN component is uniquely identified within the Bridge by the port number of the associated Customer Edge Port. A customer-network port is an S-VLAN component Port on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a single customer. A provider-network port is an S-VLAN component Port on a Provider Bridge that can transmit and receive frames for multiple customers." REFERENCE "IEEE 802.1ad Sec 3" DEFVAL { customerEdge } ::= { arubaWiredProviderBridgePortEntry 2 } -- ********************************************************************** -- Conformance information -- ********************************************************************** arubaWiredProviderBridgeCompliances OBJECT IDENTIFIER ::= { arubaWiredProviderBridgeConformance 1 } arubaWiredProviderBridgeGroups OBJECT IDENTIFIER ::= { arubaWiredProviderBridgeConformance 2 } arubaWiredProviderBridgeBaseGroup OBJECT-GROUP OBJECTS { arubaWiredProviderBridgeType, arubaWiredProviderBridgeEtherType, arubaWiredProviderBridgePortType, arubaWiredProviderBridgeVlanType } STATUS current DESCRIPTION "Basic Provider Bridge configuration information." ::= { arubaWiredProviderBridgeGroups 1 } arubaWiredProviderBridgeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HPE Switches with IEEE standard Provider Bridge MIBs." MODULE MANDATORY-GROUPS { arubaWiredProviderBridgeBaseGroup } ::= { arubaWiredProviderBridgeCompliances 1 } END