CADANT-CMTS-SPECTRUM-MGMT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32
        	FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue, RowStatus, DateAndTime, DisplayString    
		FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP  
		FROM SNMPv2-CONF
    InterfaceIndex 
		FROM IF-MIB
	cadIfUpstreamChannelEntry
		FROM CADANT-CMTS-UPCHANNEL-MIB
    TenthdB
		FROM DOCS-IF-MIB
    cadSpectrum
		FROM CADANT-PRODUCTS-MIB;

cadSpMgtMib  MODULE-IDENTITY
    LAST-UPDATED "201304300000Z"
    ORGANIZATION "Arris International Inc."
    CONTACT-INFO
        "Customer Support 

        Address: Arris Group Inc.
                2400 E. Ogden Avenue, Suite 180
                Lisle, IL 60532

        Phone:  +1 630 281 3000"
     DESCRIPTION
     "The MIB module describes the C4 Upstream Spectrum Management"
    REVISION "201304300000Z"
    DESCRIPTION "Support cadSpMgtStateFrequency up to 85MHz."
    REVISION "201207030000Z"
    DESCRIPTION "Added state change count in history entry."
    REVISION "201207020000Z"
    DESCRIPTION "Added cadSpMgtHistorySysUpTime in history entry."
    REVISION "200602210000Z"
    DESCRIPTION "Use cadSpMgtHistoryTime for index."
    REVISION "200602060000Z"
    DESCRIPTION "Added spectrum group id in history entry."
    REVISION "200511100000Z"
    DESCRIPTION "Initial version."
    ::= { cadSpectrum 4 }

cadSpMgtNotifications OBJECT IDENTIFIER ::= { cadSpMgtMib 1 }
cadSpMgtObjects       OBJECT IDENTIFIER ::= { cadSpMgtMib 2 }
cadSpMgtConformance   OBJECT IDENTIFIER ::= { cadSpMgtMib 3 }
cadSpMgtGroup  	      OBJECT IDENTIFIER ::= { cadSpMgtObjects 1 }
cadSpMgtRequests      OBJECT IDENTIFIER ::= { cadSpMgtObjects 2 }



--
-- Textual conventions
--

SpTriggerType ::= TEXTUAL-CONVENTION
    STATUS       current
DESCRIPTION 
   "The trigger is used to manage the state transition in C4
   Upstream Spectrum Management State Machine. The trigger has the
   following defined values:

      TOD - 
defined with <Time of Day> and reoccurring day within a week 
                                  
Periodic - 
defined with a period of time
                                  
degradation	- 
defined with 3 threshold value for the purpose of degradation
                                  
improvement - 
defined with 3 threshold value for the purpose of improvement

                "
    SYNTAX       INTEGER { tod(1),
				   periodic(2),
				   degradation(3),
				   improvement(4)
                 }

SpTriggerDay ::= TEXTUAL-CONVENTION
    STATUS       current
DESCRIPTION 
   "The trigger day is to specify the reoccurrence of the TOD
trigger for a week. 

	  The trigger day has the following defined values:
				7: every day
				0: Sunday
				1: Monday
				2: Tuesday
				3: Wednesday
				4: Thursday
				5: Friday
				6: Saturday"
                
    SYNTAX       INTEGER { 
				   sunday(0),
				   monday(1),
				   tuesday(2),
				   wednesday(3),
				   thursday(4),
				   friday(5),
				   saturday(6),
                   everyday(7)
                 }

SpTimeOfDay ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1d:1d:1d"
    STATUS       current
    DESCRIPTION
            "A time-of-day specification in hours:minutes:seconds.

            field  octets  contents                  range
            -----  ------  --------                  -----
              1       1    hour                      0..23
              2       1    minutes                   0..59
              3       1    seconds                   0..59"
    SYNTAX    OCTET STRING (SIZE (3))

Unsigned16 ::= TEXTUAL-CONVENTION  
    STATUS       current  
    DESCRIPTION  
    "An unsigned 16 bit integer."  
    SYNTAX    Unsigned32 (0..65535)

--
-- Upstream Spectrum Management Group Table
--

cadSpMgtGroupTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CadSpMgtGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "Each entry in this table defines a C4 Upstream Spectrum
 Management group."
       ::= { cadSpMgtGroup 1 }

cadSpMgtGroupEntry OBJECT-TYPE
    SYNTAX     CadSpMgtGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION 
        "A set of C4 Upstream Spectrum Management group information.
         Entries in the cadSpMgtGroupTable are created and
         deleted using the cadSpMgtGroupRowStatus object."
    INDEX { cadSpMgtGroupIndex }
    ::= { cadSpMgtGroupTable 1 }

CadSpMgtGroupEntry ::=
    SEQUENCE {
		cadSpMgtGroupIndex			Integer32,		
		cadSpMgtGroupSamplePeriod	Integer32,
		cadSpMgtGroupHopPeriod		Integer32,
		cadSpMgtGroupCodeword		Integer32,
		cadSpMgtGroupRetryPeriod	Integer32,
		cadSpMgtGroupEnabled		TruthValue,
		cadSpMgtGroupRowStatus		RowStatus
    }

cadSpMgtGroupIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..40)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The index used to identify the Upstream Spectrum Group."
       ::= { cadSpMgtGroupEntry 1 }

cadSpMgtGroupSamplePeriod OBJECT-TYPE
     SYNTAX     Integer32 (0..60)
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
        "The time (in seconds) between samples used for the degradation 
	    and the improvement triggers."
    DEFVAL { 4 }
     ::= { cadSpMgtGroupEntry 2 }

cadSpMgtGroupHopPeriod OBJECT-TYPE
     SYNTAX     Integer32 (0..3600)
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
        "The minimum period of time (in seconds) that must pass between
        successive state transitions."
    DEFVAL { 1200 }
     ::= { cadSpMgtGroupEntry 3 }

cadSpMgtGroupCodeword OBJECT-TYPE
    SYNTAX	Integer32 (100..32768)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "The minimum number of codewords that must have been transmitted
       on the upstream channel before the degradation and improvement
       triggers are considered to be valid."
    DEFVAL { 256 }
     ::= { cadSpMgtGroupEntry 4 }

cadSpMgtGroupRetryPeriod OBJECT-TYPE
     SYNTAX     Integer32 (1..604800)
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
        "This object specifies the minimum wait time (in seconds) 
	    before the retry is attempted.  The retry-period timer controls 
        how quickly the state machine is allowed to retry when   
        transition failure occurred."
    DEFVAL { 86400 }
     ::= { cadSpMgtGroupEntry 5 }

cadSpMgtGroupEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "This object allows for the optional enabling and disabling of a
       spectrum group."
    DEFVAL { true }
    ::= { cadSpMgtGroupEntry 6 }

cadSpMgtGroupRowStatus OBJECT-TYPE
    SYNTAX      	RowStatus
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
	   "The status of this conceptual row. To create a row in this
       table, set this object to createAndGo(4). Support of the values
       includes createAndGo(4) and destroy(6)"
    ::= { cadSpMgtGroupEntry 7 }

--
-- Upstream Spectrum Management State Table
--

cadSpMgtStateTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CadSpMgtStateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "Each entry in this table defines a state used for C4 Upstream 
       Spectrum Management."
       ::= { cadSpMgtGroup 2 }

cadSpMgtStateEntry OBJECT-TYPE
    SYNTAX     CadSpMgtStateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION 
       "A set of Upstream Spectrum Management state information.
        Entries in the cadSpMgtStateTable are created and
        deleted using the cadSpMgtStateRowStatus object."
    INDEX { cadSpMgtGroupIndex, cadSpMgtStateIndex }
    ::= { cadSpMgtStateTable 1 }

CadSpMgtStateEntry ::=
    SEQUENCE {
		cadSpMgtStateIndex          Integer32,
		cadSpMgtStateFrequency      Integer32,
		cadSpMgtStateWidth          Integer32,
		cadSpMgtStateModulationProfile Unsigned32,
		cadSpMgtStateRowStatus      RowStatus
    }

cadSpMgtStateIndex OBJECT-TYPE
    SYNTAX     	Integer32 (1..16)
    MAX-ACCESS 	not-accessible
    STATUS     	current
    DESCRIPTION
       "The index used to identify the state in C4 Upstream Spectrum 
	 Management."
       ::= { cadSpMgtStateEntry 1 }

cadSpMgtStateFrequency OBJECT-TYPE
    SYNTAX     	Integer32 (0 | 5000000..85000000)
    UNITS      	"hertz"
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
       "The center of the frequency band for the upstream channel 
	   associated with this state."
	DEFVAL { 0 }
       ::= { cadSpMgtStateEntry 2 }

cadSpMgtStateWidth OBJECT-TYPE
    SYNTAX     	Integer32 (0..6400000)
    UNITS      	"hertz"
    MAX-ACCESS 	read-create
    STATUS     	current
    DESCRIPTION
       "The bandwidth for the upstream channel associated with this
 state."
    DEFVAL { 0 }
     ::= { cadSpMgtStateEntry 3 }

cadSpMgtStateModulationProfile OBJECT-TYPE
     SYNTAX     Unsigned32
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
        "An entry identical to the docsIfModIndex in the 
        docsIfCmtsModulationTable that describes the upstream channel 
        associated with this state."
    DEFVAL { 0 }
     ::= { cadSpMgtStateEntry 4 }

cadSpMgtStateRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
	 "The status of this conceptual row. To create a row in this
       table, set this object to createAndGo(4). Support of the
 values includes createAndGo(4) and destroy(6)"
       ::= { cadSpMgtStateEntry 5 }

--
-- Upstream Spectrum Management trigger table
--

cadSpMgtTriggerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CadSpMgtTriggerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "Each entry in this table defines a trigger for C4 Upstream 
 	 Spectrum Management"
       ::= { cadSpMgtGroup 3 }

cadSpMgtTriggerEntry OBJECT-TYPE
    SYNTAX     	CadSpMgtTriggerEntry
    MAX-ACCESS 	not-accessible
    STATUS    	current
    DESCRIPTION 
        "A set of Upstream Spectrum Management trigger information.
         Entries in the cadSpMgtTriggerTable are created and
         deleted using the cadSpMgtTriggerRowStatus object."
    INDEX { cadSpMgtTriggerIndex }
    ::= { cadSpMgtTriggerTable 1 }

CadSpMgtTriggerEntry ::=
    SEQUENCE {
		cadSpMgtTriggerIndex	Integer32,
		cadSpMgtTriggerType		SpTriggerType,
		cadSpMgtTriggerDay		SpTriggerDay,
		cadSpMgtTriggerTOD		SpTimeOfDay, 
		cadSpMgtTriggerPeriod	Integer32,	
		cadSpMgtTriggerThres1	Unsigned32,
		cadSpMgtTriggerThres2	Unsigned32,
		cadSpMgtTriggerThres3	TenthdB,
		cadSpMgtTriggerRowStatus RowStatus
    }

cadSpMgtTriggerIndex OBJECT-TYPE
    SYNTAX     	Integer32 (1..64)
    MAX-ACCESS 	not-accessible
    STATUS     	current
    DESCRIPTION
       "The trigger index used to identify the trigger for each state 
	 transition."
       ::= { cadSpMgtTriggerEntry 1 }

cadSpMgtTriggerType OBJECT-TYPE
    SYNTAX     	SpTriggerType
    MAX-ACCESS 	read-create
    STATUS     	current
    DESCRIPTION
       "The trigger type."
    DEFVAL { degradation }
       ::= { cadSpMgtTriggerEntry 2 }

cadSpMgtTriggerDay OBJECT-TYPE
    SYNTAX     	SpTriggerDay
    MAX-ACCESS 	read-create
    STATUS     	current
    DESCRIPTION
       "The trigger day is to specify the reoccurrence of the TOD 
   	   trigger for a week. The trigger day has the following defined 
       values:
				0: Sunday
				1: Monday
				2: Tuesday
				3: Wednesday
				4: Thursday
				5: Friday
				6: Saturday
				7: Everyday
                "
    ::= { cadSpMgtTriggerEntry 3 }

cadSpMgtTriggerTOD OBJECT-TYPE
   SYNTAX		SpTimeOfDay
   MAX-ACCESS	read-create
   STATUS     	current
   DESCRIPTION
      "Time of day to transition to next state, in HH:MM:SS format"
    DEFVAL { '000000'h }
       ::= { cadSpMgtTriggerEntry 4 }

cadSpMgtTriggerPeriod OBJECT-TYPE
SYNTAX		Integer32 (1..604800)
UNITS		"seconds"
    MAX-ACCESS 	read-create
    STATUS     	current
    DESCRIPTION
       "The amount of time that should be loaded into a timer, in
       seconds, once the state machine has transitioned into the 
       associated current state. When the timer expires, the transition 
       to next state defined in the state machine is executed. This 
       value is an integer between 1 and 604,800 (which covers a period 
       of a week). This object is applicable for trigger type of   
       periodic(2)"
       ::= { cadSpMgtTriggerEntry 5 }

cadSpMgtTriggerThres1 OBJECT-TYPE
    SYNTAX	    Unsigned32 (0..100000)
    UNITS		"0.001 percentage"  
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
       "This object is applicable for trigger type of degradation (3) 
	   and improvement (4).
       For degradation trigger, this is the maximum acceptable
       percentage of FEC errors (uncorrectable plus correctable).
       For improvement trigger, this is the minimum acceptable
       percentage of FEC errors (uncorrectable plus correctable)"
    DEFVAL { 0 }
       ::= { cadSpMgtTriggerEntry 6 }

cadSpMgtTriggerThres2 OBJECT-TYPE
    SYNTAX	    Unsigned32 (0..100000)
    UNITS		"0.001 percentage"  
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
       "This object is applicable for trigger type of degradation (3) 
	   and improvement (4).
       For degradation trigger, this is the maximum acceptable  
       percentage of uncorrectable FEC errors.
       For improvement trigger, this is the minimum acceptable  
       percentage of uncorrectable FEC errors."
    DEFVAL { 0 }
       ::= { cadSpMgtTriggerEntry 7 }

cadSpMgtTriggerThres3 OBJECT-TYPE
SYNTAX      	TenthdB (0..1000)
UNITS       	"dB"
    MAX-ACCESS 	read-create
    STATUS     	current
    DESCRIPTION
       "This object is applicable for trigger type of degradation (3) 
	   and improvement (4).
       For degradation trigger, this is the minimum acceptable   
       Signal/Noise ratio (in dB).
       For improvement trigger, this is the maximum acceptable   
       Signal/Noise ratio (in dB). "
    DEFVAL { 1000 }
       ::= { cadSpMgtTriggerEntry 8 }

cadSpMgtTriggerRowStatus OBJECT-TYPE
    SYNTAX	      RowStatus
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
	   "The status of this conceptual row. To create a row in this
       table, set this object to createAndGo(4). Support of the values
       includes createAndGo(4) and destroy(6)"
       ::= { cadSpMgtTriggerEntry 9 }

--
-- Upstream Spectrum Management State Transition Table
--

cadSpMgtStateTransTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CadSpMgtStateTransEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "Each entry in this table defines the state machine in C4 Upstream Spectrum Management."
       ::= { cadSpMgtGroup 4 }

cadSpMgtStateTransEntry OBJECT-TYPE
    SYNTAX     CadSpMgtStateTransEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION 
      ""
    INDEX { cadSpMgtGroupIndex, cadSpMgtStateIndex, cadSpMgtTriggerIndex }
    ::= { cadSpMgtStateTransTable 1 }

CadSpMgtStateTransEntry ::=
    SEQUENCE {
		cadSpMgtTransNextState			Integer32,
		cadSpMgtStateTransRowStatus		RowStatus
    }

cadSpMgtTransNextState OBJECT-TYPE
    SYNTAX     Integer32 (1..16)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "The index used to identify the next state to which the state
        machine may transition to as a result of this trigger."
       ::= { cadSpMgtStateTransEntry 1 }

cadSpMgtStateTransRowStatus OBJECT-TYPE
    SYNTAX      	RowStatus
    MAX-ACCESS	read-create
    STATUS		current
    DESCRIPTION
	 "The status of this conceptual row. To create a row in this
 table, set this object to createAndGo(4). Support of the values
 includes createAndGo(4) and destroy(6)"
       ::= { cadSpMgtStateTransEntry 2 }

cadSpMgtRequestUpChannelIfIndex OBJECT-TYPE
    SYNTAX     	InterfaceIndex
    MAX-ACCESS 	read-write
    STATUS     	current
    DESCRIPTION
       "IfIndex of the upstream channel."
       ::= { cadSpMgtRequests 1 }

cadSpMgtRequestTriggerIndex OBJECT-TYPE
    SYNTAX     	Integer32 
    MAX-ACCESS 	read-write
    STATUS     	current
    DESCRIPTION
 "The trigger index used to identify the trigger. A value of 0  
 indicates no trigger is attempted."
       ::= { cadSpMgtRequests 2 }

cadSpMgtRequestNextState OBJECT-TYPE
    SYNTAX     	Integer32 
    MAX-ACCESS 	read-write
    STATUS     	current
    DESCRIPTION
       "The index used to identify the next state to which the state
        machine may transition to."
       ::= { cadSpMgtRequests 3 }

cadSpMgtRequestSNR OBJECT-TYPE
SYNTAX      	TenthdB
UNITS       	"dB"
    MAX-ACCESS 	read-write
    STATUS     	current
    DESCRIPTION
       "This object is the measured Signal/Noise ratio (in dB) for the 
       upstream channel. This object is applicable when the value in 
       cadSpMgtRequestTriggerIndex defines the trigger of type 
       degradation or improvement."
       ::= { cadSpMgtRequests 4 }

cadSpMgtRequestUFecError OBJECT-TYPE
    SYNTAX	    Unsigned32 (0..100000)
    UNITS		"0.001 percentage"       
    MAX-ACCESS	read-write
    STATUS		current
    DESCRIPTION
       "This object is the measured percentage of uncorrectable
       FEC errors for the upstream channel.
       This object is applicable when the value in 
       cadSpMgtRequestTriggerIndex defines the trigger of type 
       degradation or improvement."
       ::= { cadSpMgtRequests 5 }

cadSpMgtRequestFecError OBJECT-TYPE
    SYNTAX		Unsigned32 (0..100000)
    UNITS		"0.001 percentage"       
    MAX-ACCESS	read-write
    STATUS		current
	DESCRIPTION
       "This object is the measured percentage of FEC errors 
       (uncorrectable plus correctable) for the upstream channel.
       This object is applicable when the value in 
       cadSpMgtRequestTriggerIndex defines the trigger of type 
       degradation or improvement."
       ::= { cadSpMgtRequests 6 }

cadSpMgtRequestCommit OBJECT-TYPE 
    SYNTAX 		TruthValue 
    MAX-ACCESS 	read-write 
    STATUS 		current 
    DESCRIPTION 
       "The command to execute the request when set to
       true(1). 
       The following are reasons for rejecting an SNMP 
       SET to this object: 
       -	An operation is commited for a non-existing upstream channel ID or the corresponding ifOperStatus is down(2).
       -	An operation is committed but cadSpMgtRequestNextState is not an existing state index in cadSpMgtStateEntry.
       -	An operation is committed but the value in cadSpMgtRequestTriggerIndex is non-zero and not an existing trigger index in cadSpMgtTriggerEntry. 
       Reading this object always returns false(2)." 
    DEFVAL {false} 
    ::= { cadSpMgtRequests 7 }

--
-- Upstream Spectrum Management History Table
--

cadSpMgtHistoryTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CadSpMgtHistoryEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "Table of state transition history."
       ::= { cadSpMgtGroup 5 }

cadSpMgtHistoryEntry OBJECT-TYPE
    SYNTAX     CadSpMgtHistoryEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION 
      "Entry of state transition history."
    INDEX { cadSpMgtHistoryUpChannelIfIndex, cadSpMgtHistoryTime }
    ::= { cadSpMgtHistoryTable 1 }

CadSpMgtHistoryEntry::=
    SEQUENCE {
		cadSpMgtHistoryUpChannelIfIndex     InterfaceIndex,
		cadSpMgtHistoryTime                 DateAndTime,
		cadSpMgtHistoryTriggerIndex         Integer32,
		cadSpMgtHistoryFromStateIndex       Integer32,
		cadSpMgtHistoryNextStateIndex       Integer32,
		cadSpMgtHistoryResultStateIndex     Integer32,
		cadSpMgtHistorySNR                  TenthdB,
		cadSpMgtHistoryUFecError            Unsigned32,
		cadSpMgtHistoryFecError             Unsigned32,
		cadSpMgtHistorySpareCardId          Integer32,
		cadSpMgtHistoryText                 DisplayString,
		cadSpMgtHistoryGroupId              Integer32,
		cadSpMgtHistoryStateChangeCount     Unsigned16,
		cadSpMgtHistorySysUpTime            Unsigned32
    }

cadSpMgtHistoryUpChannelIfIndex OBJECT-TYPE
    SYNTAX     	InterfaceIndex
    MAX-ACCESS 	not-accessible
    STATUS     	current
    DESCRIPTION
       "IfIndex of the upstream channel."
       ::= { cadSpMgtHistoryEntry 1 }

cadSpMgtHistoryTime OBJECT-TYPE
    SYNTAX     	DateAndTime
    MAX-ACCESS 	not-accessible
    STATUS     	current
    DESCRIPTION
       "The value of this object is the actual clock time
        when this entry was created."
       ::= { cadSpMgtHistoryEntry 2 }

cadSpMgtHistoryTriggerIndex OBJECT-TYPE
    SYNTAX     	Integer32 
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "The trigger index used to identify the trigger for state 
       transition. A value of 0 indicates a manual trigger."
       ::= { cadSpMgtHistoryEntry 3 }

cadSpMgtHistoryFromStateIndex OBJECT-TYPE
    SYNTAX     	Integer32 
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "The index used to identify the current state."
       ::= { cadSpMgtHistoryEntry 4 }

cadSpMgtHistoryNextStateIndex OBJECT-TYPE
    SYNTAX     	Integer32 
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "The index used to identify the next state to which the state
        machine may transition to."
       ::= { cadSpMgtHistoryEntry 5 }

cadSpMgtHistoryResultStateIndex OBJECT-TYPE
    SYNTAX     	Integer32 
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "The index used to identify the result state to which the state
       machine has transitioned to. For a successful state transition
       request, the value of this object is the same as 
       cadSpMgtHistoryNextState."
       ::= { cadSpMgtHistoryEntry 6 }

cadSpMgtHistorySNR OBJECT-TYPE
    SYNTAX      TenthdB
    UNITS       "dB"
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "This object is the measured Signal/Noise ratio (in dB) for the 
       upstream channel. This object is applicable when the value in 
       cadSpMgtHistoryTriggerIndex defines the trigger of type 
       degradation or improvement."
       ::= { cadSpMgtHistoryEntry 7 }

cadSpMgtHistoryUFecError OBJECT-TYPE
    SYNTAX	    Unsigned32 (0..100000)
    UNITS		"0.001 percentage"  
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION
       "This object is the measured percentage of uncorrectable
       FEC errors for the upstream channel. This object is applicable 
	   when the value in cadSpMgtHistoryTriggerIndex defines the trigger 
	   of type degradation or improvement."
       ::= { cadSpMgtHistoryEntry 8 }

cadSpMgtHistoryFecError OBJECT-TYPE
    SYNTAX	    Unsigned32 (0..100000)
    UNITS		"0.001 percentage"  
    MAX-ACCESS	read-only
    STATUS		current
	DESCRIPTION
       "This object is the measured percentage of FEC errors 
	   (uncorrectable plus correctable) for the upstream channel.
       This object is applicable when the value in 
       cadSpMgtHistoryTriggerIndex defines the trigger of type 
       degradation or improvement."
       ::= { cadSpMgtHistoryEntry 9 }

cadSpMgtHistorySpareCardId OBJECT-TYPE
    SYNTAX     	Integer32 (0..99)
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       " The cardId of the spare CAM. The value of 0 indicates the
       CAM is not spared at the time the request is received."       
       ::= { cadSpMgtHistoryEntry 10 }

cadSpMgtHistoryText OBJECT-TYPE
    SYNTAX     	DisplayString
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "This object provides a human-readable description of the entry,
       including all relevant context."       
       ::= { cadSpMgtHistoryEntry 11 }

cadSpMgtHistoryGroupId OBJECT-TYPE
    SYNTAX     	Integer32
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "The Upstream Spectrum Group index associated with the upstream channel."       
       ::= { cadSpMgtHistoryEntry 12 }

cadSpMgtHistoryStateChangeCount OBJECT-TYPE
    SYNTAX     	Unsigned16
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "Provides the count of state changes in the history entry. This object will
       always increase. It is 16 bits, once it is at 0xffff, the counter will roll
       over and start from beginning."       
       ::= { cadSpMgtHistoryEntry 13 }

cadSpMgtHistorySysUpTime OBJECT-TYPE
    SYNTAX     	Unsigned32
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "Provides the system up time in the history entry. This object will
       always increase."       
       ::= { cadSpMgtHistoryEntry 14 }

--
-- Upstream Spectrum Management History Table
--

cadSpMgtUpChannelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CadSpMgtUpChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table describes Upstream Frequency Agility attributes of 
			attached upstream channels."
       ::= { cadSpMgtGroup 6 }

cadSpMgtUpChannelEntry OBJECT-TYPE
        SYNTAX      CadSpMgtUpChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The List of Upstream Frequency Agility attributes associated with
			an upstream channel."
		AUGMENTS { cadIfUpstreamChannelEntry }
        ::= { cadSpMgtUpChannelTable 1 }

CadSpMgtUpChannelEntry ::= SEQUENCE {
		cadSpMgtUpChannelCurrState       Integer32,
        cadSpMgtUpChannelStateTransTime  DateAndTime
        }

cadSpMgtUpChannelCurrState OBJECT-TYPE
	SYNTAX          Integer32
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION     
	   "The current state as a result of the upstream spectrum group 
	   state transition.  This object is only applicable if upstream
	   spectrum management is enabled for this upstream channel."
	REFERENCE      
	    "C4 CMTS Upstream Frequency Agility"
	::= { cadSpMgtUpChannelEntry 1 }

cadSpMgtUpChannelStateTransTime OBJECT-TYPE
    SYNTAX     	DateAndTime
    MAX-ACCESS 	read-only
    STATUS     	current
    DESCRIPTION
       "The value of this object is the actual clock time when the current 
	   state information in cadIfUpChannelSpGroupCurrState is most 
	   recently updated."
       ::= { cadSpMgtUpChannelEntry 2 }
END