ARRIS-CM-DOC30-DEVICE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, Counter32, IpAddress, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI InetAddress, InetAddressType FROM INET-ADDRESS-MIB arrisProdIdCM FROM ARRIS-MIB TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC docsDevEvLevel, docsDevEvId, docsDevEvText FROM DOCS-CABLE-DEVICE-MIB ifPhysAddress, ifIndex FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB AmplitudeData FROM DOCS-IF3-MIB TenthdB, docsIfCmCmtsAddress, docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode, docsIfCmStatusModulationType FROM DOCS-IF-MIB; -- draft-ietf-ipcdn-docs-rfmibv2-05 arrisCmDoc30Mib MODULE-IDENTITY LAST-UPDATED "1507160000Z" -- Jul 16, 2015 ORGANIZATION "ARRIS Broadband" CONTACT-INFO "Chris Hare Postal: ARRIS Broadband 3871 Lakefield Drive Suite 300 Suwanee, GA 30024-1242 U.S.A. Phone: +1 678-473-5165 E-mail: chris.hare@arrisi.com" DESCRIPTION "This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices." -- Revision history REVISION "1507160000Z" -- Jul 16, 2015 DESCRIPTION "Added the arrisCmDoc30SetupDownstreamScanMaskEnable MIB." REVISION "1503110000Z" -- Mar 11, 2015 DESCRIPTION "Added the arrisCmDoc30SetupIgnoreMtaDnsRDValidation MIB." REVISION "1412100000Z" -- Dec 10, 2014 DESCRIPTION "Added arrisCmDoc30SessionTime, arrisCmDoc30SessionDataDownloaded, arrisCmDoc30SessionDataUploaded and arrisCmDoc30ResetActivitySummary to folder 'arrisCmDoc30Access'." REVISION "1410290000Z" -- Oct 29, 2014 DESCRIPTION "Update text for channel bonding MIBs" REVISION "1409190000Z" -- Sep 19, 2014 DESCRIPTION "Restore arrisCmDoc30SwTable for the EFL feature" REVISION "1409090000Z" -- Sep 9, 2014 DESCRIPTION "Added two new MIB objects to folder 'arrisCmDoc30Setup' for expanded channel bonding." REVISION "1408050000Z" -- Aug 05, 2014 DESCRIPTION "Added new MIB 'arrisCmDoc30Setup6rdPPSupport'" REVISION "1407290000Z" -- July 29, 2014 DESCRIPTION "Added arrisCmDoc30SetupPowerSaveOption to support Puma5." REVISION "1407220000Z" -- July 22, 2014 DESCRIPTION "Added new MIB 'arrisCmDoc30DhcpExtendedSrvDUIDV6' for TR181 DHCPv6 client Profiles. Added new MIB 'arrisCmDoc30DhcpExtendedCmDUIDV6' for TR181 DHCPv6 client Profiles." REVISION "1407110000Z" -- July 11, 2014 DESCRIPTION "Added new table 'arrisCmDoc30DhcpExtendedDnsSvrTable' for TR181 DHCPv4 client Profiles. Added new MIB 'arrisCmDoc30DhcpExtendedRenewLease' for TR181 DHCPv4 client Profiles." REVISION "1406180000Z" -- June 18, 2014 DESCRIPTION "Added new MIB objects to folder 'arrisCmDoc30Spectrum' for Spectrum Analyzer." REVISION "1404080000Z" -- April 29, 2014 DESCRIPTION "Added new folder 'arrisCmDoc30TraceRtMgmt' for TR143 TraceRoute Profiles." REVISION "1404070000Z" -- April 7, 2014 DESCRIPTION "Added new folder 'arrisCmDoc30PingMgmt' for TR143 IPPing Profiles." REVISION "1401230000Z" -- Jan 23, 2014 DESCRIPTION "Added arrisCmDoc30BaseTodStatus to reflect the current TOD status." REVISION "1307040000Z" -- Jul 04, 2013 DESCRIPTION "Restore the arrisCmDoc30Software MIB group(only include arrisCmDoc30SwRegistrationState)." REVISION "1306120000Z" -- May 29, 2013 DESCRIPTION "Changed the minimum value of arrisCmDoc30SetupTftpBlkSize from 64 to 512." REVISION "1305290000Z" -- May 29, 2013 DESCRIPTION "Added 0 as a legal value in the description for arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue" REVISION "1305160000Z" -- May 16, 2013 DESCRIPTION "Removed DEFVAL for arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue since it is HW specific" REVISION "1305080000Z" -- May 8, 2013 DESCRIPTION "Removed the arrisCmDoc30Software MIB group." REVISION "1306070000Z" -- May 7, 2013 DESCRIPTION "Removed obsolete arrisCmDoc30SetupMultiColorLedBitmap and arrisCmDoc30SetupInvertMulticolorLEDs" REVISION "1304230000Z" -- Apr. 23, 2013 DESCRIPTION "Renamed Arris eSAFE mibs. Added two new mibs to Arris eSAFE mibtree. Other minor mods" REVISION "1304110000Z" -- Apr. 11, 2013 DESCRIPTION "Replaced arrisCmDoc30SetupExtendedUpstreamTransmitPowerEnable with arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue" REVISION "1304110000Z" -- Apr. 11, 2013 DESCRIPTION "Removed obsolte MIB arrisCmDoc30SetupPowerSaveOption" REVISION "1301110000Z" -- Jan. 11, 2013 DESCRIPTION "Added new MIB 'arrisCmDoc30SetupRCPBypass'" REVISION "1208150000Z" -- August, 15, 2012 DESCRIPTION "Added arrisCmDoc30AccessTechnicianPassword" REVISION "1203210000Z" -- March, 21, 2012 DESCRIPTION "Added new mode keepallusds(2) to arrisCmDoc30SetupPowerSaveMode " REVISION "1202090000Z" -- February, 09, 2012 DESCRIPTION "Added arrisCmDoc30SetupT4timeoutRebootEnable" REVISION "1202010000Z" -- February, 01, 2012 DESCRIPTION "Added arrisCmDoc30SetupExtendSwCurrentVersEnable" REVISION "1201190000Z" -- January, 19, 2012 DESCRIPTION "Added arrisCmDoc30SetupTftpTimeout and arrisCmDoc30SetupTftpBlkSize" REVISION "1110200000Z" -- October, 19, 2011 DESCRIPTION "Added arrisCmDoc30SetupL2VPNPromiscuousMode" REVISION "1108160000Z" -- August 16, 2011 DESCRIPTION "Added arrisCmDoc30SetupIgnoreMddSymbolClockIndicator" REVISION "1107210000Z" -- July 21, 2011 DESCRIPTION "Added arrisCmDoc30SetupEthernetLinkBounce" REVISION "1107140000Z" -- July 14, 2011 DESCRIPTION "Added arrisCmDoc30DhcpExtended tree" REVISION "1104280000Z" -- April 28, 2011 DESCRIPTION "Added arrisCmDoc30SetupSWDLFilenameCheckOverride and arrisCmDoc30SetupTODSyncTimeout and arrisCmDoc30DhcpMtaOpt60Override" REVISION "1104050000Z" -- April 05, 2011 DESCRIPTION "Added arrisCmDoc30SwRegistrationState" REVISION "1103140000Z" -- March 14,2011 DESCRIPTION "Added arrisCmDoc30SetupPowerSaveWifiShutdownOnly" REVISION "1102230000Z" -- February 23,2011 DESCRIPTION "Added arrisCmDoc30SetupKeepCpeOnIfDisconnect" REVISION "1012290000Z" -- Dec 29, 2010 DESCRIPTION "Corrected the description for arrisCmDoc30DhcpSecondaryTeleDhcpSvr and arrisCmDoc30DhcpPrimaryTeleDhcpSvr" REVISION "1010080000Z" -- October 8, 2010 DESCRIPTION "added arrisCmDoc30SetupPowerSaveOption" REVISION "1009010000Z" -- September 1, 2010 DESCRIPTION "Enlarged arrisCmDoc30BaseReportDuplex string to support 852" REVISION "1008100000Z" -- August 10, 2010 DESCRIPTION "Added arrisCmDoc30SetupPowerSaveMode" REVISION "1007120000Z" -- July 12, 2010 DESCRIPTION "Added arrisCmDoc30SetupReducedOORThreshold" REVISION "1007060000Z" -- July 06, 2010 DESCRIPTION "Renamed the arrisCmDoc30EsafeSmartDownload mib to arrisCmDoc30EsafeSmartDownloadMode and added arrisCmDoc30EsafeSmartDownloadStatus" REVISION "1006250000Z" -- June 25, 2010 DESCRIPTION "Added arrisCmDoc30ResetReasonLog" REVISION "1002010000Z" -- February 01, 2010 DESCRIPTION "Added the arrisCmDoc30Esafe and arrisCmDoc30EsafeFirmware branches" REVISION "0911200000Z" -- November 20, 2009 DESCRIPTION "Added the arrisCmDoc30SetupMdfSupportOverride" REVISION "0908210000Z" -- August 20, 2009 DESCRIPTION "Added the arrisCmDoc30SetupTODTimeOffset" REVISION "0908200000Z" -- August 20, 2009 DESCRIPTION "Added the arrisCmDoc30SetupUdcAllowed" REVISION "0907220000Z" -- July 22, 2009 DESCRIPTION "Added the arrisCmDoc30SetupMddIpModeOverride" REVISION "0906250000Z" -- June 25, 2009 DESCRIPTION "Added the arrisCmDoc30SetupDSTPolicy" REVISION "0906020000Z" -- June 2, 2009 DESCRIPTION "Added the arrisCmDoc30ProvisionedChannelIDs" REVISION "0905130000Z" -- May 13, 2009 DESCRIPTION "Added the arrisCmDoc30ResetAccessTime" REVISION "0904170000Z" -- April 17, 2009 DESCRIPTION "Added the arrisCmDoc30SetupPartServiceFallback20 MIB." REVISION "0904090000Z" -- April 9, 2009 DESCRIPTION "Added the arrisCmDoc30BondingMode MIB." REVISION "0904060000Z" -- April 6, 2009 DESCRIPTION "Added the arrisCmDoc30MfgCertCommunityName MIB." REVISION "0903300000Z" -- March 30, 2009 DESCRIPTION "Added the arrisCmDoc30SwCvc MIBs." REVISION "0903130000Z" -- March 13, 2009 DESCRIPTION "Added the arrisCmDoc30SetupSecDsLossReinitEnable MIB." REVISION "0903120000Z" -- March 12, 2009 DESCRIPTION "Added the arrisCmDoc30AccessSSHEnable MIB." REVISION "0903100000Z" -- March 10, 2009 DESCRIPTION "Added the arrisCmDoc30AccessHttpPwCtrl MIB." REVISION "0903050000Z" -- March 5, 2009 DESCRIPTION "Added the arrisCmDoc30Software MIB group." REVISION "0903040000Z" -- March 4, 2009 DESCRIPTION "Added the arrisCmDoc30SetupMultiColorLedBitmap MIB." REVISION "0902110000Z" -- Feb 11, 2009 DESCRIPTION "Added the arrisCmDoc30SetupPacketProcessorEnable MIB." REVISION "0812110000Z" -- Dec 11, 2008 DESCRIPTION "Added the arrisCmDoc20CLITimeout MIB." REVISION "0809030000Z" -- Sept 03, 2008 DESCRIPTION "removed the ProvmMethodIndicator MIB. This will be implemented on the MTA side." REVISION "0809020000Z" -- Sept 02, 2008 DESCRIPTION "Added new folder 'arrisCmDoc30Setup'. Added the arrisCmDoc30ProvMethodIndicator MIB to it." REVISION "0807180000Z" -- July 18, 2008 DESCRIPTION "Added new mibs for WAN/LAN HTTP access" REVISION "0806180000Z" -- June. 18, 2008 DESCRIPTION "Added new folder 'arrisCmDoc30Access' to contain all password and telnet access mibs. Added new mibs 'arrisCmDoc30AccessClientSeed','arrisCmDoc30AccessSinglePassword'" REVISION "1411060000Z" -- Nov 06, 2014 DESCRIPTION "Added the arrisCmDoc30CustomID MIB." ::= { arrisProdIdCM 4 } CvcString ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "This data type defines a string of hex bytes comprising the CVC." SYNTAX OCTET STRING (SIZE(0..255)) SpectrumAnalysisWindowFunction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object controls the windowing function which will be used when performing the discrete fourier transform for the analysis. Note that all window functions may not be supported by all devices. If an attempt is made to set the object to an unsupported window function, an error of inconsistentValue will be returned." REFERENCE "Harris, Fredric J. (Jan 1978). 'On the use of Windows for Harmonic Analysis with the Discrete Fourier Transform'. Proceedings of the IEEE, Vol 66, Issue 1, Jan 1978 doi:10.1109/PROC.1978.10837" SYNTAX INTEGER { other(0), hann(1), blackmanHarris(2), rectangular(3), hamming(4), flatTop(5), gaussian(6), chebyshev(7) } arrisCmDoc30MibObjects OBJECT IDENTIFIER ::= { arrisCmDoc30Mib 1 } arrisCmDoc30Base OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 1 } arrisCmDoc30Access OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 2 } arrisCmDoc30Setup OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 3 } -- -- The following group describes the Dhcp parameters objects -- arrisCmDoc30Dhcp OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 4 } arrisCmDoc30DhcpLeaseParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 1 } arrisCmDoc30DhcpSvrParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 2 } arrisCmDoc30DhcpCmParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 3 } arrisCmDoc30DhcpMtaParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 4 } -- arrisCmDoc30Software OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 5 } arrisCmDoc30Esafe OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 6 } arrisCmDoc30EsafeFirmware OBJECT IDENTIFIER ::= { arrisCmDoc30Esafe 1 } arrisCmDoc30ResetReasonLog OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 7 } -- -- The following group describes the Dhcp Extended parameters objects -- arrisCmDoc30DhcpExtended OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 8 } -- -- The following group extends docsIfBaseObjects in rfc4546.mib -- arrisCmDoc30IfBaseObjectsExtended OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 9 } -- -- The following group describes the TR143 IPPing and TraceRoute Profiles -- arrisCmDoc30PingMgmt OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 10 } arrisCmDoc30TraceRtMgmt OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 11 } arrisCmDoc30ResetFactoryDefaults OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Reset a number of settings to their default factory values. This includes clearing the modem's frequency cache and restoring a number of NVM parameters to their original values." ::= { arrisCmDoc30Base 6 } arrisCmDoc30FwImageName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the firmware image currently operating on this device." ::= { arrisCmDoc30Base 7 } arrisCmDoc30FwImageBuildTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The build date and time of the firmware image currently operating on this device." ::= { arrisCmDoc30Base 8 } arrisCmDoc30MfgCertCommunityName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The community name of the Manufacturing certificate in use. 'US' for North American Docsis or 'BE' for European Docsis." ::= { arrisCmDoc30Base 9 } arrisCmDoc30BondingMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The registration mode of the modem and how many DS/US it is using." ::= { arrisCmDoc30Base 10 } arrisCmDoc30ResetAccessTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true(1) resets Access start times in NVRAM. Reading this object always returns false(2)." ::= { arrisCmDoc30Base 11 } arrisCmDoc30ProvisionedChannelIDs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays channel IDs of all upstreams or downstreams provisioned by the CMTS. Downstreams that are not currently locked are enclosed in ()." ::= { arrisCmDoc30Base 12 } arrisCmDoc30BaseReportDuplex OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the current duplex status of the Ethernet Port. Reading this object can return the strings 'Full', 'Half', or 'Unavailable'." ::= { arrisCmDoc30Base 13 } arrisCmDoc30BaseTodStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the current TOD status. 0 - Not Provisioned, 1 - Missing Server Address, 2 - Missing Server Address, 3 - Missing Server Address, 4 - Starting Request, 5 - Request Failed, 6 - No Response Received, 7 - Invalid Data Format, 8 - Retrieved, 9 - Failed" ::= { arrisCmDoc30Base 14 } arrisCmDoc30CustomID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer which represents a customer ID for customization." ::= { arrisCmDoc30Base 15} arrisCmDoc30AccessTelnetPassword OBJECT-TYPE SYNTAX DisplayString(SIZE(0..11)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password required to enable telnet." ::= { arrisCmDoc30Access 1 } arrisCmDoc30AccessTelnetEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), enableLanWan(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to turn on/off telnet access. For telnet to be enabled, the arrisCmDoc30AccessTelnetPassword MIB must be set." ::= { arrisCmDoc30Access 2 } arrisCmDoc30AccessClientSeed OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DES encoded seed--provided by the user--that will be used to generate the password for access to the CLI. When read, this object will return a zero-length string." ::= { arrisCmDoc30Access 3 } arrisCmDoc30AccessSinglePassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The encoded password--provided by the user--that will be used for single password access to the CLI. When read, this object will return a zero-length string." ::= { arrisCmDoc30Access 4 } arrisCmDoc30AccessHttpLan OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to turn on/off LAN HTTP access. For LAN HTTP to be enabled, the arrisCmDoc30AccessHttpLan MIB must be set to 1." ::= { arrisCmDoc30Access 5 } arrisCmDoc30AccessHttpWan OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), cmpage(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to turn on/off WAN HTTP access. For WAN HTTP to be enabled, the arrisCmDoc30AccessHttpWan MIB must be set to 1. 1: disable(0) - Turn off WAN HTTP access. 2: enable(1) - Turn on WAN HTTP access. 3: cmpage(3) - Only enables access to the CM Page. No redirect to the Gateway GUI is allowed." ::= { arrisCmDoc30Access 6 } arrisCmDoc30AccessHttpTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set how long after login before web gui access times out. In minutes, 0 disables timeout" ::= { arrisCmDoc30Access 7 } arrisCmDoc30CLITimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Max time that a telnet/SSH session can be idle before it is terminated. Range is 0-65535 minutes, where 0 disables the timer completely." ::= { arrisCmDoc30Access 8 } arrisCmDoc30AccessHttpPwCtrl OBJECT-TYPE SYNTAX INTEGER { none(0), advanced(1), all(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control which modem web pages are password protected. A value of 0 means no pages are protected, 1 means advanced pages, 2 means all pages." ::= { arrisCmDoc30Access 9 } arrisCmDoc30AccessSSHEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), enableLanWan(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to turn on/off SSH access. For SSH to be enabled, the arrisCmDoc30AccessTelnetPassword MIB must be set. For TWC, enable only for wan telnet enable, enableLanWan for wan and lan telnet enable. For non-TWC, enable and enableLanWan are have the same behaviour" ::= { arrisCmDoc30Access 10 } arrisCmDoc30AccessTechnicianPassword OBJECT-TYPE SYNTAX DisplayString(SIZE(12..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password for the technician." ::= { arrisCmDoc30Access 11 } arrisCmDoc30SessionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the Device was last power cycled, rebooted or since the reset activity button was last pressed." ::= { arrisCmDoc30Access 12 } arrisCmDoc30SessionDataDownloaded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data download count since the Device was last power cycled, rebooted or since the reset activity button was last pressed." ::= { arrisCmDoc30Access 13 } arrisCmDoc30SessionDataUploaded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data upload count since the Device was last power cycled, rebooted or since the reset activity button was last pressed." ::= { arrisCmDoc30Access 14 } arrisCmDoc30ResetActivitySummary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Device clears the arrisCmDoc30SessionTime, arrisCmDoc30SessionDataDownloaded and arrisCmDoc30SessionDataUploaded when set to true. Always return false(2)." ::= { arrisCmDoc30Access 15 } arrisCMDoc30AccessWANACL OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Access Control List of IPs that are allowed to originate request to access GUI via CM IP. If empty means no restrict. Format: ip[-ip](;ip[-ip])* Example: 10.0.0.0-10.255.255.255;172.44.56.0-172.44.56.244" ::= { arrisCmDoc30Access 16 } arrisCmDoc30SetupDsBonding OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB is used to enable/disable downstream channel bonding. Changes take effect at the next reboot. This MIB should only be set from the CM configuration file. If this MIB value is altered in the CM configuration file, the CM will store the new setting and reboot automatically. If the value of this MIB in NVM is 'disable' and the CM configuration file does not contain this MIB, the CM will reset this MIB value in NVM to 'enable' and reboot. The arrisCmDoc30ResetFactoryDefaults MIB will set the stored value back to 'enable'." ::= {arrisCmDoc30Setup 1} arrisCmDoc30SetupPacketProcessorEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to turn on/off the modem's packet processor." ::= { arrisCmDoc30Setup 2 } arrisCmDoc30SetupMultiColorLedBitmap OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Bitmap used to turn on/off the modem's multi-color LED functionality. A value of 1 enables the multi-color functionality and a value of 0 disables it. 0x1 Link LED 0x2 Upstream LED 0x4 Downstream LED Devices with multiple rear Ethernet ports do not support multiple colors for the front panel Link LED. They will ignore the Link LED bit 0x1." ::= { arrisCmDoc30Setup 3 } arrisCmDoc30SetupSecDsLossReinitEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB when enabled allows an outage of a bonded downstream secondary channel to force a reinitialization to occur that makes the DOCSIS modem re-register. This feature may provide an improved level of partial services support on some early DOCSIS 3.0 CMTS. This MIB should be disabled when used with CMTS that fully support DOCSIS 3.0 CM-STATUS messages." ::= { arrisCmDoc30Setup 4 } arrisCmDoc30SetupPartServiceFallback20 OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB when enabled prevents the REG-ACK message from sending up a partial services confirmation code and instead will reinitialize the primary downstream DOCSIS MAC and force the CM to fallback to DOCSIS 2.0 mode which limits the CM to 1x1. Periodically the CM with then retry to range and register in DOCSIS 3.0 mode. This feature is designed specifically to allow interoperability with early DOCSIS 3.0 CMTS releases that do not support a REG-ACK message containing a partial services confirmation code. This feature may provide an improved level of partial services support on some early DOCSIS 3.0 CMTS. This MIB should be disabled when used with any CMTS that fully supports DOCSIS 3.0 CM-STATUS messages." ::= { arrisCmDoc30Setup 5 } arrisCmDoc30SetupDSTPolicy OBJECT-TYPE SYNTAX DisplayString(SIZE(0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to get and set the daylight saving time policy. This parameter is a rule with two fields separated by semicolon (;) as shown below: start=;end= and are of the form: /// = 1,2,12 (for Jan, Feb, Dec) = [+|-]1,2,3,...,,31. If is -1, it means the on or before the end-of-the-month (in other words the last occurrence of in that month) = 1, 2, 3,..., 7 (for Mon, Tue, ..., Sun), or 0. If is 0, it means the date to start or end daylight saving is at exactly the given date. In that case, the value must not be negative. If is not zero, then the daylight saving starts or ends on the on or after the given date if is positive, or on or before the given date if is negative. = hour (0-23). The following example reflects the new change starting March 2007 in U.S.A. DST starts on the second Sunday in March and ends on the first Sunday in November: start=3/8/7/02;end=11/1/7/02" ::= { arrisCmDoc30Setup 6 } arrisCmDoc30SetupMddIpModeOverride OBJECT-TYPE SYNTAX INTEGER { disable(0), ipv4(1), ipv6(2), apm(3), dpm(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to override the IP Mode TLV in the MDD message. 0 = use the MDD value 1 = IPv4 Only 2 = IPv6 Only 3 = Alternate (APM) 4 = Dual-stack (DPM)" ::= { arrisCmDoc30Setup 7 } arrisCmDoc30SetupPacketCableRegion OBJECT-TYPE SYNTAX INTEGER { northAmerican(0), european(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB is used to set the desired region for MTA PacketCable provisioning." ::= { arrisCmDoc30Setup 8 } arrisCmDoc30SetupTodDelaySecProv OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB is used to delay secure provisioning when time-of-day retrieval fails." ::= { arrisCmDoc30Setup 9 } arrisCmDoc30SetupUdcAllowed OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to disallow upstream drop classifiers, overriding the REG-RSP value. 0 = disallow UDC, regardless of what the CMTS sets 1 = allow UDC" ::= { arrisCmDoc30Setup 10 } arrisCmDoc30SetupTODTimeOffset OBJECT-TYPE SYNTAX Integer32 (-43200..46800) MAX-ACCESS read-write STATUS current DESCRIPTION "This mib is used to update CM TOD time offset. The range of the offset is -12*60*60(-43200) to 13*60*60(46800) in seconds. 13 is Daylight Savings Time in the +12 time zone). The CM TOD time offset is overwritten when this mib is set or CM dhcp time offset option is received." DEFVAL { 0 } ::= { arrisCmDoc30Setup 11 } arrisCmDoc30SetupDhcpRetries OBJECT-TYPE SYNTAX INTEGER { retry0x(0), retry1x(1), retry2x(2), retry3x(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Retries during provisioning. This MIB object controls the number of times the MTA will ignore the received, non-Secure (Basic or Hybrid) DHCP OFFER while waiting for a Secure flow DHCP OFFER. The value of this MIB object controls the value of the CLI parameter PACM_CONFIG_PROV_DHCP_RETRIES." ::= { arrisCmDoc30Setup 12 } arrisCmDoc30SetupInvertMulticolorLEDs OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB is used to enable/disable inverted multicolor LED behavior. The value will be stored to NonVolatile memory(NVM) and will persist across reboots. 0 = Original LED color scheme: Bonded DS = Green; non-bonded DS = Yellow Bonded US = Green; non-bonded US = Yellow GigE/USB2.0 = Green; 10/100/USB1.x = Yellow 1 = Inverted LED color scheme: Bonded DS = Yellow; non-bonded DS = Green Bonded US = Yellow; non-bonded US = Green GigE/USB2.0 = Yellow; 10/100/USB1.x = Green Gateway devices with multiple Ethernet ports do not support Yellow for the front panel GigE LED. The Green color indicates one or more connections of any speed. The rear Ethernet LEDs adjacent to their respective RJ45 ports properly indicate connection speed with different colors." ::= { arrisCmDoc30Setup 13 } arrisCmDoc30SetupTurboDoxEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable TurboDox operation. Set to true(1) to enable TurboDox operation mode. Set to false(2) to disable TurboDox operation mode. This object can only be changed by the configuration file." DEFVAL { true } ::= { arrisCmDoc30Setup 14 } arrisCmDoc30SetupMdfSupportOverride OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to override MDF Support in CMTS REG-RSP value and disabling MDF Support. 0 = disable, use value CMTS sets 1 = enable, force MDF Support to be disabled" ::= { arrisCmDoc30Setup 15 } arrisCmDoc30SetupAdvancedWebPageAccess OBJECT-TYPE SYNTAX INTEGER { none (0), lan-access (1), wan-access (2), wan-lan-access (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable access to the Advanced web page. To disable all access set value to (0) To enable LAN access set value to (1) To enable WAN access set value to (2) To enable both access set value to (3)" ::= { arrisCmDoc30Setup 16 } arrisCmDoc30SetupReducedOORThreshold OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This mib controls the number Out-Of-Range packets the modem wiil discard and the minimum time it will wait before it re-syncs the 'Next Expected Packet Sequence Number' with the CMTS. When enabled, the packet threshold is set to 3 and the timeout to 1 second. When disabled, the threshold is set to 1000 packets and the timeout to 2 minutes per the Mulpi Specification" DEFVAL { 0 } ::= { arrisCmDoc30Setup 17 } arrisCmDoc30SetupPowerSaveMode OBJECT-TYPE SYNTAX INTEGER { partialservice (0), reinitmac (1), keepallusds (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This mib controls the method used for power save mode. When set to reinitmac, PowerSaveMode will trigger a mac reinit to 1x1 unbonded, and exit from PowerSaveMode will trigger another mac reinit to MxN bonded mode. When set to partialservice, PowerSaveMode will not reinitialize the mac, but will issue CM-STATUS messages to the CMTS reporting partial service when powering down the secondary channels. When set to keepallusds, PowerSaveMode will keep all upstream and downstream channels unchanged." DEFVAL { 0 } ::= { arrisCmDoc30Setup 18 } arrisCmDoc30SetupPowerSaveOption OBJECT-TYPE SYNTAX INTEGER { maxupstream (0), maxbattery (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to maxbattery, the modem will be configured to maximize battery hold up time during AC power failure. In this mode the modem will not support synchronous upstreams, such as SCDMA. When set to maxupstream the modem will support all upstream types but the battery hold up time will be reduced, even when not registered on a synchronous upstream. If this MIB value is altered the modem will reboot automatically after the change is applied." ::= { arrisCmDoc30Setup 19 } arrisCmDoc30SetupKeepCpeOnIfDisconnect OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the CPE mac address will remain in the cpe table when the interface is disconnected." DEFVAL { 0 } ::= { arrisCmDoc30Setup 20 } arrisCmDoc30SetupPowerSaveWifiShutdownOnly OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, Gateway products will not power down the entire gateway, but just the WiFi radio. This will allow the wired ethernet to remain active. When disabled (default), the entire gateway including wired ethernet will be powered down" DEFVAL { 0 } ::= { arrisCmDoc30Setup 21 } arrisCmDoc30SetupTODSyncTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value determines the interval between the TOD sync operations. Range is 0-4320 hours, where 0 disables the sync completely. This value sets the interval starting from the setting of the new value. Hence a setting of 10 causes the TOD server to sync every 10 hours from the time the value was set Feature is disable by default" DEFVAL { 0 } ::= { arrisCmDoc30Setup 22 } arrisCmDoc30SetupSWDLFilenameCheckOverride OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB when enabled will allow the modem to accept and download a new image that has the same filename as the previous download. By default this MIB is disabled to prevent an automated provisioning system from downloading an image the modem has already received. This override only affects docsDevSwAdminStatus initiated upgrades using upgradeFromMgt, using allowProvisioningUpgrade and identical filenames is still blocked." DEFVAL { 0 } ::= { arrisCmDoc30Setup 23 } arrisCmDoc30SetupEthernetLinkBounce OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB when enabled will add an additional step to the T4 DOCSIS MAC reinitialization sequence. In addition to the normal DOCSIS MAC reinitilization, this MIB will force the modem to briefly take down the ethernet link between the modem and the CPE, which may be useful to cause the attached customer CPE to drop its IP address and restart its DHCP process." DEFVAL { 0 } ::= { arrisCmDoc30Setup 24 } arrisCmDoc30SetupIgnoreMddSymbolClockIndicator OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the cable modem will ignore the Symbol Clock Locking Indicator TLV in the MDD message and always use asynchronous timing mode. In this mode, the cable modem will not lock to the downstream symbol clock on its Primary Downstream Channel. It will acquire the synchronization timebase to be used for the upstream burst timing from the SYNC messages. When disabled, the cable modem will follow the timing mode specified by the Symbol Clock Indicator TLV in the MDD message." DEFVAL { 1 } ::= { arrisCmDoc30Setup 25 } arrisCmDoc30SetupL2VPNPromiscuousMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set to true(1) to enable L2VPN promiscuous mode. When in promiscuous mode all upstream and downstream L2VPN traffic will be bridged by the CM regardless of source or destination MAC address. Learned MAC addresses from L2VPN traffic will not be added to the CPE table. Set to false(2) to disable the feature. When set to false all unknown (i.e. previously unlearned) unicast and broadcast L2VPN traffic will be processed in accordance with the DOCSIS MULPI specification as required by the BSoD L2VPN specification." DEFVAL { false } ::= { arrisCmDoc30Setup 27 } arrisCmDoc30SetupTftpBlkSize OBJECT-TYPE SYNTAX Integer32 (512..65464) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for the TFTP Blocksize Option (RFC 2348). Valid values range between 64 and 65464 octets, inclusive. If this object is set to 0,default block size of 1428 for ipv6 connection and block size of 1448 for ipv4 connections will be used. This mib is applicable for only firmware downloads. Note : Changing the value of this mib to too high or too low may affect tftp performance" ::= { arrisCmDoc30Setup 28 } arrisCmDoc30SetupTftpTimeout OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for the TFTP Timeout Option (RFC 2349). Valid values range between 1 and 255, inclusive. Setting this object to 0(default) disables this option. When the smart download(arrisCmDoc30EsafeSmartDownloadMode) is enabled then the fixed timeout value will be used by the tftp client.This mib is applicable for only firmware downloads " ::= { arrisCmDoc30Setup 29 } arrisCmDoc30SetupExtendSwCurrentVersEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the Firmware version displayed in the MIB docsDevSwCurrentVers will be in the format of '-'. If disabled, the MIB docsDevSwCurrentVers will be displayed in normal format of '" DEFVAL {0} ::= { arrisCmDoc30Setup 30 } arrisCmDoc30SetupT4timeoutRebootEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable unit reboot upon T4 timeout. If it is set true(1), unit will reboot upon receipt of a T4 message. If it is set false (2), this feature is disabled." DEFVAL { false } ::= { arrisCmDoc30Setup 31 } arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue OBJECT-TYPE SYNTAX Integer32 (0 | 205..244) MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, extended upstream transmit power capabilities will be reported in REG-REQ-MP message. Setting to 0 disables this functionality. Setting to nonzero controls what Pmax the modem advertises in 0.25dB steps. The default value is hardware-specific. It is not recommended to change from default values. Exceeding the capabilities of the upstream amplifier may introduce distortions and spurs which may decrease SNR of this upstream channel and adjacent upstream channels. Please refer to the Firmware Guide and take care when setting this value." ::= { arrisCmDoc30Setup 32 } arrisCmDoc30SetupRCPBypass OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), default(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable RCP check bypass feature. If it is set to disable (0), RCP check bypass feature is disabled. If it is set to enable (1), RCP check bypass feature is enabled. If it is set to default (2), RCP check bypass feature is disabled and follow the setting in cm config file. Setting via SNMP is persistent, and will override the setting in cm config file if it is set to enable (1) or disable (0), will follow the setting in cm config file if it is set to default (2). Setting via cm config file is not persistent." DEFVAL { 2 } ::= { arrisCmDoc30Setup 33 } arrisCmDoc30Setup6rdPPSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable 6RD (protocol 41) PP support. If it is set true(1), unit will allow 6RD (protocol 41) packet passing through the packet processor. If it is set false (2), this feature is disabled." DEFVAL { false } ::= { arrisCmDoc30Setup 34 } arrisCmDoc30SetupT4EvCtrl OBJECT-TYPE SYNTAX INTEGER { every30s(0), once(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When an upstream is impaired, no ranging opportunities are provided for that upstream channel, modem would send the T4 timeout every 30s. In this situation, there will be excessive T4 timeout events sent to the syslog server. This MIB is used to control whether to send T4 timeout event when the modem is in upstream partial service mode. If the MIB is set to once, T4 timeout event is sent only when the status of one upstream is changed from in-service to impaired. If the MIB is set to every30s, T4 timeout event is sent every 30s when one upstream is impaired." DEFVAL { 0 } ::= { arrisCmDoc30Setup 35 } arrisCmDoc30SetupExpandedBondingKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This mib is used to set a key that enables bonding additional DS channels for certain modem models. When the value in the CM configuration file contains a valid license key, the CM will allow bonding additional DS channels beyond its default capability. The arrisCmDoc30BondingModeCapability MIB can be used to read the current DS bonding capability. When the key does not match or is not present in the CM configuration file, the CM will support its default DS channel bonding capability. If the value in the CM configuration file represents a change in value from the previous registration, the modem will reboot to apply the change." ::= { arrisCmDoc30Setup 36 } arrisCmDoc30BondingModeCapability OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This mib shows the number of downstream channels the modem is capable of bonding for certain modem type. If arrisCmDoc30SetupExpandedBondingKey is absent or invalid, and modem supports this feature, shipped number of DS is returned. If arrisCmDoc30SetupExpandedBondingKey is present and valid, and modem supports this feature, current number of DS is returned. If the modem does not support this feature, unknown is returned" ::= { arrisCmDoc30Setup 37 } arrisCmDoc30SetupIgnoreMtaDnsRDValidation OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the device's MTA provisioning subsystem will ignore the validation of the RD flag in the DNS response. Value is not persistent and must be in CM config file." DEFVAL { 0 } ::= { arrisCmDoc30Setup 38 } arrisCmDoc30SetupTimeoffsetWrapper OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), default(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable Timeoffset Wrapper feature. If it is set to disable (0), Timeoffset Wrapper feature is disabled. If it is set to enable (1), Timeoffset Wrapper feature is enabled. If it is set to default (2), Timeoffset Wrapper feature is disabled and follow the setting in cm config file. Setting via SNMP is persistent. It will override the setting in cm config file if it is set to enable (1) or disable (0). It will follow the setting in cm config file if it is set to default (2). Setting via cm config file is not persistent." DEFVAL { 2 } ::= { arrisCmDoc30Setup 39 } arrisCmDoc30SetupDownstreamScanMaskEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is just available for CM820B/AU product to enable/disable CM downstream scan mask." DEFVAL { 0 } ::= { arrisCmDoc30Setup 40 } -- Group which implements CM spectrum analysis for devices which are capable of -- supporting this feature arrisCmDoc30Spectrum OBJECT IDENTIFIER ::= { arrisCmDoc30Setup 209 } arrisCmDoc30SpectrumMeasurementTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30SpectrumMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides a list of spectral analysis measurements as performed across a range of center frequencies. The table is capable of representing a full scan of the spectrum." ::= { arrisCmDoc30Spectrum 1 } arrisCmDoc30SpectrumMeasurementEntry OBJECT-TYPE SYNTAX ArrisCmDoc30SpectrumMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row in the arrisCmDoc30SpectrumMeasurementTable represents the spectral analysis around a single center frequency point in the spectrum." INDEX { arrisCmDoc30SpectrumFrequency } ::= { arrisCmDoc30SpectrumMeasurementTable 1 } ArrisCmDoc30SpectrumMeasurementEntry ::= SEQUENCE { arrisCmDoc30SpectrumFrequency Integer32, arrisCmDoc30SpectrumAmplitudeData AmplitudeData, arrisCmDoc30SpectrumTotalSegmentPower TenthdB } arrisCmDoc30SpectrumFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the center frequency of the spectral anaysis span which is represented by this entry." ::= { arrisCmDoc30SpectrumMeasurementEntry 1 } arrisCmDoc30SpectrumAmplitudeData OBJECT-TYPE SYNTAX AmplitudeData MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a list of the spectral amplitudes as measured at the center frequency specified by arrisCmDoc30SpectrumFrequency. The frequency bins are ordered from lowest to highest frequencies covering the frequency span. Information about the center frequency, frequency span, number of bins and resolution bandwidth are included to provide context to the measurement point. The number of bins will always be an odd number in order to provide a spectrum representation that is symmetric about the middle data point or bin." ::= { arrisCmDoc30SpectrumMeasurementEntry 2 } arrisCmDoc30SpectrumTotalSegmentPower OBJECT-TYPE SYNTAX TenthdB MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the total RF power present in the segment with the center frequency equal to the Frequency index and the span equal to the SegmentFrequencySpan. The value represents the sum of the spectrum power in all of the associated bins. The value is computed by summing power (not dB) values and converting the final sum to TenthdB." ::= { arrisCmDoc30SpectrumMeasurementEntry 3 } arrisCmDoc30SpectrumEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable the spectrum analyzer feature. By default, the feature is disabled unless explicitly enabled. Note that the feature may be disabled by the system under certain circumstances if the spectrum analyzer would affect critical services. In such a case, the object will return 'false' when read, and will reject sets to 'true' with an 'inconsistenValue' error." DEFVAL { false } ::= { arrisCmDoc30Spectrum 2 } arrisCmDoc30SpectrumInactivityTimeout OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the length of time after the last spectrum analysis measurement before the feature is automatically disabled. If set to a value of 0, the feature will remain enabled until it is explicitly disabled." DEFVAL { 300 } ::= { arrisCmDoc30Spectrum 3 } arrisCmDoc30SpectrumFirstSegmentCenterFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the center frequency of the first segment for the spectrum analysis measurement. The frequency bins for this segment lie symmetrically to the left and right of this center frequency. If the number of bins in a segment is odd, the segment center frequency lies directly on the center bin. If the number of bins in a segment is even, the segment center frequency lies halfway between two bins. Changing the value of this attribute may result in changes to the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the attribute to the closest valid value. Setting this mib should be prior to arrisCmDoc30SpectrumEnable to make it take effect" DEFVAL { 93000000 } ::= { arrisCmDoc30Spectrum 4 } arrisCmDoc30SpectrumLastSegmentCenterFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the center frequency of the last segment of the spectrum analysis measurement. The frequency bins for this segment lie symmetrically to the left and right of this center frequency. If the number of bins in a segment is odd, the segment center frequency lies directly on the center bin. If the number of bins in a segment is even, the segment center frequency lies halfway between two bins. The value of the LastSegmentCenterFrequency attribute should be equal to the FirstSegmentCenterFrequency plus and integer number of segment spans as determined by the SegmentFrequencySpan. Changing the value of this attribute may result in changes to the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the attribute to the closest valid value. Setting this mib should be prior to arrisCmDoc30SpectrumEnable to make it take effect" DEFVAL { 993000000 } ::= { arrisCmDoc30Spectrum 5 } arrisCmDoc30SpectrumSegmentFrequencySpan OBJECT-TYPE SYNTAX Unsigned32 (1000000..900000000) UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the frequency span of each segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable. If set to a value of 0, then a default span will be chosen based on the hardware capabilities of the device. Segments are contiguous from the FirstSegementCenterFrequency to the LastSegmentCenterFrequency and the center frequency for each successive segment is incremented by the SegmentFequencySpan. The number of segments is (LastSegmentCenterFrequency - FirstSegmentCenterFrequency)/SegmentFrequencySpan + 1. A segment is equivalent to an instance in the docsIf3CmSpectrumAnalysisMeasTable. The chosen SegmentFrequencySpan affects the number of entries in the docsIf3CmSpectrumAnalysisMeasTable. A more granular SegmentFrequencySpan may adversely affect the amount of time needed to query the table entries in addition to possibly increasing the acquisition time. Changing the value of this attribute may result in changes to the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the object to the closest valid value. Setting this mib should be prior to arrisCmDoc30SpectrumEnable to make it take effect" DEFVAL { 7500000 } ::= { arrisCmDoc30Spectrum 6 } arrisCmDoc30SpectrumNumBinsPerSegment OBJECT-TYPE SYNTAX Unsigned32 (2..2048) UNITS "bins-per-segment" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the number of bins collected by the measurement performed for each segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable. Note that if this attribute is set to an invalid value, the device may return an error, or may adjust the value of the attribute to the closest valid value. Setting this mib should be prior to arrisCmDoc30SpectrumEnable to make it take effect" DEFVAL { 64 } ::= { arrisCmDoc30Spectrum 7 } arrisCmDoc30SpectrumEquivalentNoiseBandwidth OBJECT-TYPE SYNTAX Unsigned32 (50..500) UNITS "hundredthsbin" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the user to request an equivalent noise bandwidth for the resolution bandwidth filter used in the spectrum analysis. This corresponds to the spectral width of the window function used when performing a discrete Fourier transform for the analysis. The window function which corresponds to a value written to this object may be obtained by reading the value of the WindowFunction attribute. If an unsupported value is requested, the device may return an error, or choose the closest valid value to the one which is requested. If the closest value is chosen, then a subsequent read of this attribute will return the actual value which is in use." DEFVAL { 150 } ::= { arrisCmDoc30Spectrum 8 } arrisCmDoc30SpectrumWindowFunction OBJECT-TYPE SYNTAX SpectrumAnalysisWindowFunction MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls or indicates the windowing function which will be used when performing the discrete Fourier transform for the analysis. The WindowFunction and the Equivalent Noise Bandwidth are related. If a particular WindowFunction is selected, then the EquivalentNoiseBandwidth for the function which is in use, will be reported by the EquivalentNoiseBandwidth attribute. Alternatively if an EquivalentNoiseBandwidth value is chosen then if a WindowFunction function representing that EquivalentNoiseBandwidth is defined in the CM, that value will be reported in the WindowFunction MIB object, or a value of 'other' will be reported. Use of 'modern ' windowing functions not yet defined will likely be reported as 'other'. Note that all window functions may not be supported by all devices. If an attempt is made to set the object to an unsupported window function, or if writing of the WindowFunction is not supported, an error will be returned." ::= { arrisCmDoc30Spectrum 9 } arrisCmDoc30SpectrumNumberOfAverages OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the number of averages that will be performed on spectral bins. The average will be computed using the 'leaky integrator' method, where: reported bin value = alpha*accumulated bin values + (1-alpha)*current bin value. Alpha is one minus the reciprocal of the number of averages. For example, if N=25, then alpha = 0.96. A value of 1 indicates no averaging. Re-writing the number of averages will restart the averaging process. If there are no accumulated values, the accumulators are made equal to the first measured bin amplitudes. If an attempt is made to set the attribute to an unsupported number of averages, an error will be returned." DEFVAL { 8 } ::= { arrisCmDoc30Spectrum 10 } -- -- arrisCmDoc30DhcpLeaseParameters MIB objects -- arrisCmDoc30DhcpOfferedLeaseTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the Offered IP Lease time expressed in seconds." ::= { arrisCmDoc30DhcpLeaseParameters 1 } arrisCmDoc30DhcpTimeUntilRenew OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current time remaining before the MTA starts the lease renewal process. This time is expressed in seconds." ::= { arrisCmDoc30DhcpLeaseParameters 2 } arrisCmDoc30DhcpTimeUntilRebind OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current time remaining before the CM starts the lease rebinding process. This time is expressed in seconds." ::= { arrisCmDoc30DhcpLeaseParameters 3 } arrisCmDoc30DhcpLeaseTimeRemaining OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the Remaining IP Lease time expressed in seconds." ::= { arrisCmDoc30DhcpLeaseParameters 4 } -- arrisCmDoc30DhcpSvrParameters MIB objects -- arrisCmDoc30DhcpState OBJECT-TYPE SYNTAX INTEGER { init-selecting (0), requesting (1), bound (2), renewing (3), rebinding (4), init-reboot (5), renew-requested (6), released (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Dhcp state of the CM." ::= { arrisCmDoc30DhcpSvrParameters 1 } arrisCmDoc30DhcpPrimaryDhcpServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the primary Dhcp server address." ::= { arrisCmDoc30DhcpSvrParameters 2 } arrisCmDoc30DhcpTftpSvrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Tftp Server IP address in use." ::= { arrisCmDoc30DhcpSvrParameters 3 } arrisCmDoc30DhcpTimeSvrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Time server IP address in use." ::= { arrisCmDoc30DhcpSvrParameters 4 } arrisCmDoc30DhcpCmTimeOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Time offset being used by the CM." ::= { arrisCmDoc30DhcpSvrParameters 5 } arrisCmDoc30DhcpPrimaryTeleDhcpSvr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the primary MTA Dhcp server address." ::= { arrisCmDoc30DhcpSvrParameters 6 } arrisCmDoc30DhcpSecondaryTeleDhcpSvr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the secondary MTA Dhcp server address." ::= { arrisCmDoc30DhcpSvrParameters 7 } -- arrisCmDoc30DhcpCmParameters MIB objects -- arrisCmDoc30DhcpCmIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the type of the currently leased IP address ." ::= { arrisCmDoc30DhcpCmParameters 1 } arrisCmDoc30DhcpCmIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the currently leased IP address ." ::= { arrisCmDoc30DhcpCmParameters 2 } arrisCmDoc30DhcpCmSubNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current IP subnet mask in use." ::= { arrisCmDoc30DhcpCmParameters 3 } arrisCmDoc30DhcpCmGatewayIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current IP gateway address in use." ::= { arrisCmDoc30DhcpCmParameters 4 } arrisCmDoc30DhcpCmConfigFile OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the CM configuration file to be retrived." ::= { arrisCmDoc30DhcpCmParameters 5 } -- arrisCmDoc30DhcpMtaParameters MIB objects -- arrisCmDoc30DhcpMtaOpt60Override OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable/disable SIP advertisement in MTA DHCP Option60. This MIB can only be set via the CM configuration file." DEFVAL { 0 } ::= { arrisCmDoc30DhcpMtaParameters 1 } -- arrisCmDoc30Software MIB objects -- arrisCmDoc30SwTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30SwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for the Touchstone Software Upgrade System." ::= { arrisCmDoc30Software 1 } arrisCmDoc30SwEntry OBJECT-TYPE SYNTAX ArrisCmDoc30SwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for the Touchstone Software Upgrade System." INDEX { arrisCmDoc30SwIndex } ::= { arrisCmDoc30SwTable 1 } ArrisCmDoc30SwEntry ::= SEQUENCE { arrisCmDoc30SwIndex INTEGER, arrisCmDoc30SwCustomerLoadId DisplayString, arrisCmDoc30SwHwModel DisplayString, arrisCmDoc30SwHwRev INTEGER, arrisCmDoc30SwFilename DisplayString, arrisCmDoc30SwServerAddressType InetAddressType, arrisCmDoc30SwServerAddress InetAddress } arrisCmDoc30SwIndex OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used to order the arrisCmDoc30SwTable entries." ::= { arrisCmDoc30SwEntry 1 } arrisCmDoc30SwCustomerLoadId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Custom string to identify Touchstone Software Upgrade load lineups. (OPTIONAL)" ::= { arrisCmDoc30SwEntry 2 } arrisCmDoc30SwHwModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "HW Model of Touchstone product to be downloaded. (REQUIRED)" ::= { arrisCmDoc30SwEntry 3 } arrisCmDoc30SwHwRev OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "HW Revision of Touchstone product to be downloaded. (OPTIONAL)" ::= { arrisCmDoc30SwEntry 4 } arrisCmDoc30SwFilename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name of the Touchstone software image to be loaded on to this device. (REQUIRED)" ::= { arrisCmDoc30SwEntry 5 } arrisCmDoc30SwServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The IP type (IPv4 or IPv6) of the TFTP server specified in arrisCmDoc30SwServerAddress. (REQUIRED)" ::= { arrisCmDoc30SwEntry 6 } arrisCmDoc30SwServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 or IPv6 address of the TFTP server that will be used to download the Touchstone software image. Note that before setting this object, setting arrisCmDoc30SwServerAddressType to the appropriate value is required. (REQUIRED)" ::= { arrisCmDoc30SwEntry 7 } arrisCmDoc30SwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromArrisMgt(1), allowArrisProvisioningUpgrade(2), ignoreArrisProvisioningUpgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If set to upgradeFromArrisMgt(1), the device will initiate a TFTP software image download using arrisCmDoc30SwFilename for the matching HW model type and revision in the arrisCmDoc30SwTable. If set to allowArrisProvisioningUpgrade(2), the device will use the Touchstone Software Upgrade information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreArrisProvisioningUpgrade(3), the device will disregard Touchstone Software Upgrade information from the provisioning server. At initial startup, this object has the default value of ignoreArrisProvisioningUpgrade(3)." ::= { arrisCmDoc30Software 2 } arrisCmDoc30SwOperStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), completeFromArrisProvisioning(2), completeFromArrisMgt(3), failed(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "InProgress(1) indicates that a TFTP download is currently underway. CompleteFromProvisioning(2) indicates that the last software upgrade was a result of version mismatch at provisioning. CompleteFromArrisMgt(3) indicates that the last software upgrade was a result of setting arrisCmDoc30SwAdminStatus to upgradeFromMgt. Failed(4) indicates that the last attempted download failed." ::= { arrisCmDoc30Software 3 } arrisCmDoc30SwCvcStatus OBJECT-TYPE SYNTAX INTEGER { cvcNotIncluded(1), cvcNotValidated(2), cvcValidated(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "cvcNotIncluded indicates the modem did not receive a CVC via EFL, and will use the standard manufacturing CVC TLV. cvcNotValidated indicates the modem received a CVC via EFL, but the CVC is invalid. cvcValidated indicates the modem received a CVC via EFL, and it was able to validate the CVC." ::= { arrisCmDoc30Software 4 } arrisCmDoc30SwCvc1 OBJECT-TYPE SYNTAX CvcString MAX-ACCESS read-write STATUS current DESCRIPTION "The first string of hex bytes forming the CVC. Reading from this MIB returns the entire CVC." ::= { arrisCmDoc30Software 5 } arrisCmDoc30SwCvc2 OBJECT-TYPE SYNTAX CvcString MAX-ACCESS read-write STATUS current DESCRIPTION "The second string of hex bytes forming the CVC. Reading from this MIB returns the entire CVC." ::= { arrisCmDoc30Software 6 } arrisCmDoc30SwCvc3 OBJECT-TYPE SYNTAX CvcString MAX-ACCESS read-write STATUS current DESCRIPTION "The third string of hex bytes forming the CVC. Reading from this MIB returns the entire CVC." ::= { arrisCmDoc30Software 7 } arrisCmDoc30SwCvc4 OBJECT-TYPE SYNTAX CvcString MAX-ACCESS read-write STATUS current DESCRIPTION "The fourth (and final) string of hex bytes forming the CVC. Reading from this MIB returns the entire CVC." ::= { arrisCmDoc30Software 8 } arrisCmDoc30SwRegistrationState OBJECT-TYPE SYNTAX INTEGER { docsis-DownstreamScanning (1), docsis-DownstreamRanging (2), docsis-UpstreamRanging (3), docsis-DHCP (4), docsis-TFTP (5), docsis-DataRegComplete (6), telephony-DHCP (7), telephony-TFTP (8), telephony-RegWithCallServer (9), telephony-RegComplete (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last registration step completed as the E-MTA provisioning progresses through the DOCSIS/PacketCable registration and provisioning steps." ::= { arrisCmDoc30Software 9 } -- arrisCmDoc30EsafeFirmware MIB objects -- arrisCmDoc30EsafeFwTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30EsafeFwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required to upgrade Touchstone ESAFE devices." ::= { arrisCmDoc30EsafeFirmware 1 } arrisCmDoc30EsafeFwEntry OBJECT-TYPE SYNTAX ArrisCmDoc30EsafeFwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required to upgrade Touchstone ESAFE devices." INDEX { arrisCmDoc30EsafeFwDeviceIndex } ::= { arrisCmDoc30EsafeFwTable 1 } ArrisCmDoc30EsafeFwEntry ::= SEQUENCE { arrisCmDoc30EsafeFwDeviceIndex INTEGER, arrisCmDoc30EsafeFwServerAddressType InetAddressType, arrisCmDoc30EsafeFwServerAddress InetAddress, arrisCmDoc30EsafeFwFilename DisplayString, arrisCmDoc30EsafeFwAdminStatus INTEGER, arrisCmDoc30EsafeFwOperStatus INTEGER, arrisCmDoc30EsafeFwCurrentVers DisplayString, arrisCmDoc30EsafeFwCurrentFilename DisplayString, arrisCmDoc30EsafeFwName DisplayString } arrisCmDoc30EsafeFwDeviceIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used to order the arrisCmDoc30SwTable entries. Limited to 2 entries currently. Expandable to 5 entries. ESAFE Index: 1 - GW Firmware 2 - Application Processor Firmware 3 - Unused (inaccessible for now) 4 - Unused (inaccessible for now) 5 - Unused (inaccessible for now)" ::= { arrisCmDoc30EsafeFwEntry 1 } arrisCmDoc30EsafeFwServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The IP type (IPv4 or IPv6) of the TFTP server specified in arrisCmDoc30EsafeFwServerAddress (REQUIRED)" ::= { arrisCmDoc30EsafeFwEntry 2 } arrisCmDoc30EsafeFwServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 or IPv6 address of the TFTP server that will be used to download the Touchstone firmware image. Note that before setting this object, setting arrisCmDoc30EsafeFwServerAddressType to the appropriate value is required. (REQUIRED)" ::= { arrisCmDoc30EsafeFwEntry 3 } arrisCmDoc30EsafeFwFilename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name of the Touchstone ESAFE firmware image to be loaded on to this device. (REQUIRED)" ::= { arrisCmDoc30EsafeFwEntry 4 } arrisCmDoc30EsafeFwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If set to upgradeFromMgt(1), the device will initiate a TFTP firmware image download using arrisCmDoc30EsafeFwFilename for the currently indexed esafe device in arrisCmDoc30EsafeFwDeviceIndex. If set to allowProvisioningUpgrade(2), the device will use the firmware version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard firmware image upgrade information from the provisioning server." ::= { arrisCmDoc30EsafeFwEntry 5 } arrisCmDoc30EsafeFwOperStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), completeFromProvisioning(2), completeFromMgt(3), failed(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "InProgress(1) indicates that a TFTP download is currently underway. CompleteFromProvisioning(2) indicates that the last firmware upgrade was a result of version mismatch at provisioning. CompleteFromMgt(3) indicates that the last firmware upgrade was a result of setting arrisCmDoc30EsafeFwAdminStatus to upgradeFromMgt. Failed(4) indicates that the last attempted download failed." ::= { arrisCmDoc30EsafeFwEntry 6 } arrisCmDoc30EsafeFwCurrentVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware version currently operating on this device. This string's syntax is that used by the individual vendor to identify firmware versions." ::= { arrisCmDoc30EsafeFwEntry 7 } arrisCmDoc30EsafeFwCurrentFilename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The filename of the eSAFE firmware currently operating on this device." ::= { arrisCmDoc30EsafeFwEntry 8 } arrisCmDoc30EsafeFwName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this eSAFE device" ::= { arrisCmDoc30EsafeFwEntry 9 } arrisCmDoc30EsafeSmartDownloadMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), autonegotiate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to turn ARRIS Smart Downloads on/off/auto for esafe-enabled products. The smart download feature allows the modem to pause and resume the TFTP of its firmware file in order to intelligently decide what needs to be done during the download. The upside of this feature is downloads are shorter because only the exact amount of flash that is needed by the file is erased. It also does not need to erase backup flash banks for esafe images it is not downloading. It also will enable more advanced download features in the future. If this feature is disabled then the backup images for all esafes as well as the main image will need to be erased before the download begins. There is also an autonegotiate mode that can be enabled by the flag. This will allow the modem to use the RFC2349 timeout option negotiation with the TFTP server to decide if smart downloads will be enabled or disabled for subsequent downloads. This mode will allow the modem to adapt its behavior to the server. This mib is DEPRECATED for all Puma6 and later processors (16xx, 24xx, etc). Supported Value: 0 - Smart Downloads DISABLE 1 - Smart Downloads ENABLE 2 - Smart Downloads AUTONEGOTIATE" ::= { arrisCmDoc30EsafeFirmware 2 } arrisCmDoc30EsafeSmartDownloadStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current status of the smart download feature. This result may be either statically provisioned or autonegotiated depending on the smart download mode. This mib is DEPRECATED for all Puma6 and later processors (16xx, 24xx, etc). Expected Values: 0 - Smart Downloads DISABLED 1 - Smart Downloads ENABLED" ::= { arrisCmDoc30EsafeFirmware 3 } -- arrisCmDoc30ResetReasonLog MIB objects -- arrisCmDoc30LastHwResetReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The last reset reason retrieved from the actual processor HW. This reason is used to determine if the HW or FW caused the reset. The majority of the time this reset will indicate that the FW reset the device. It should be noted that this reason is not stored off and will show only the last reason for the HW to reset." ::= { arrisCmDoc30ResetReasonLog 1 } arrisCmDoc30ResetReasonLogTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30ResetReasonLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the last 10 reset reasons." ::= { arrisCmDoc30ResetReasonLog 2 } arrisCmDoc30ResetReasonLogEntry OBJECT-TYPE SYNTAX ArrisCmDoc30ResetReasonLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the last 10 reset reasons." INDEX { arrisCmDoc30ResetReasonLogIndex } ::= { arrisCmDoc30ResetReasonLogTable 1 } ArrisCmDoc30ResetReasonLogEntry ::= SEQUENCE { arrisCmDoc30ResetReasonLogIndex INTEGER, arrisCmDoc30ResetReasonLogText DisplayString } arrisCmDoc30ResetReasonLogIndex OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used to report log reasons." ::= { arrisCmDoc30ResetReasonLogEntry 1 } arrisCmDoc30ResetReasonLogText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The reported reset reason log text." ::= { arrisCmDoc30ResetReasonLogEntry 2 } -- arrisCmDoc30DhcpExtended MIB objects -- arrisCmDoc30DhcpExtendedProvisionedMode OBJECT-TYPE SYNTAX INTEGER { ipv4-only (0), ipv6-only (1), alternate-prov-mode (2), dual-prov-mode (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Cm Provisioned Mode" ::= { arrisCmDoc30DhcpExtended 1 } arrisCmDoc30DhcpExtendedPreferredMode OBJECT-TYPE SYNTAX INTEGER { ipv4 (0), ipv6 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Cm preffered IP Mode" ::= { arrisCmDoc30DhcpExtended 2 } arrisCmDoc30DhcpExtendedActiveMode OBJECT-TYPE SYNTAX INTEGER { ipv4 (0), ipv6 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Cm active IP Mode" ::= { arrisCmDoc30DhcpExtended 3 } arrisCmDoc30DhcpExtendedLeaseParametersTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedLeaseParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for showing the dhcp lease parameters." ::= { arrisCmDoc30DhcpExtended 5} arrisCmDoc30DhcpExtendedLeaseParametersEntry OBJECT-TYPE SYNTAX ArrisCmDoc30DhcpExtendedLeaseParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for showing the dhcp lease parameters." INDEX { arrisCmDoc30DhcpExtendedLeaseParametersIndex } ::= { arrisCmDoc30DhcpExtendedLeaseParametersTable 1 } ArrisCmDoc30DhcpExtendedLeaseParametersEntry ::= SEQUENCE { arrisCmDoc30DhcpExtendedLeaseParametersIndex INTEGER, arrisCmDoc30DhcpExtendedLeaseParametersType INTEGER, arrisCmDoc30DhcpExtendedOfferedLeaseTime INTEGER, arrisCmDoc30DhcpExtendedTimeUntilRenew INTEGER, arrisCmDoc30DhcpExtendedTimeUntilRebind INTEGER, arrisCmDoc30DhcpExtendedLeaseTimeRemaining INTEGER, arrisCmDoc30DhcpExtendedRenewLease INTEGER } arrisCmDoc30DhcpExtendedLeaseParametersIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used to order the arrisCmDoc30DhcpExtendedLeaseParametersTable entries." ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 1 } arrisCmDoc30DhcpExtendedLeaseParametersType OBJECT-TYPE SYNTAX INTEGER { dhcpv4 (0), dhcpv6 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This mib displays the Dhcp Type(dhcpv4,dhcpv6)" ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 2} arrisCmDoc30DhcpExtendedOfferedLeaseTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the Offered IP Lease time expressed in seconds." ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 3} arrisCmDoc30DhcpExtendedTimeUntilRenew OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current time remaining before the MTA starts the lease renewal process. This time is expressed in seconds." ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 4 } arrisCmDoc30DhcpExtendedTimeUntilRebind OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current time remaining before the CM starts the lease rebinding process. This time is expressed in seconds." ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 5 } arrisCmDoc30DhcpExtendedLeaseTimeRemaining OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the Remaining IP Lease time expressed in seconds." ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 6 } arrisCmDoc30DhcpExtendedRenewLease OBJECT-TYPE SYNTAX INTEGER { noApply(0), apply(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to apply(1) to renew the WAN(0) DHCP lease" ::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 7 } arrisCmDoc30DhcpExtendedSvrParametersTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedSvrParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for the Dhcp Svr. Parameters." ::= { arrisCmDoc30DhcpExtended 6} arrisCmDoc30DhcpExtendedSvrParametersEntry OBJECT-TYPE SYNTAX ArrisCmDoc30DhcpExtendedSvrParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for the Dhcp Svr. Parameters." INDEX { arrisCmDoc30DhcpExtendedSvrParametersIndex } ::= { arrisCmDoc30DhcpExtendedSvrParametersTable 1 } ArrisCmDoc30DhcpExtendedSvrParametersEntry ::= SEQUENCE { arrisCmDoc30DhcpExtendedSvrParametersIndex INTEGER, arrisCmDoc30DhcpExtendedSvrParametersType INTEGER, arrisCmDoc30DhcpExtendedState INTEGER, arrisCmDoc30DhcpExtendedPrimaryDhcpServerIpAddr InetAddress, arrisCmDoc30DhcpExtendedTftpSvrIpAddr InetAddress, arrisCmDoc30DhcpExtendedTimeSvrIpAddr InetAddress, arrisCmDoc30DhcpExtendedCmTimeOffset INTEGER, arrisCmDoc30DhcpExtendedPrimaryTeleDhcpSvr InetAddress, arrisCmDoc30DhcpExtendedSecondaryTeleDhcpSvr InetAddress, arrisCmDoc30DhcpExtendedSrvDUIDV6 DisplayString } arrisCmDoc30DhcpExtendedSvrParametersIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used to order the arrisCmDoc30DhcpExtendedSvrParametersTable entries." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 1 } arrisCmDoc30DhcpExtendedSvrParametersType OBJECT-TYPE SYNTAX INTEGER { dhcpv4 (0), dhcpv6 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This mib displays the Dhcp Type(dhcpv4,dhcpv6)." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 2 } arrisCmDoc30DhcpExtendedState OBJECT-TYPE SYNTAX INTEGER { init-selecting (0), requesting (1), bound (2), renewing (3), rebinding (4), init-reboot (5), renew-requested (6), released (7), dhcp6c-init (8), dhcp6c-solicit (9), dhcp6c-inforeq (10), dhcp6c-request (11), dhcp6c-renew (12), dhcp6c-rebind (13), dhcp6c-release (14), dhcp6c-decline (15), dhcp6c-confirm (16), dhcp6c-idle (17) } MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Dhcp state of the CM." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 3 } arrisCmDoc30DhcpExtendedPrimaryDhcpServerIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the primary Dhcp server address." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 4 } arrisCmDoc30DhcpExtendedTftpSvrIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Tftp Server IP address in use." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 5 } arrisCmDoc30DhcpExtendedTimeSvrIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Time server IP address in use." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 6 } arrisCmDoc30DhcpExtendedCmTimeOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current Time offset being used by the CM." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 7 } arrisCmDoc30DhcpExtendedPrimaryTeleDhcpSvr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the primary MTA Dhcp server address." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 8 } arrisCmDoc30DhcpExtendedSecondaryTeleDhcpSvr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the secondary MTA Dhcp server address." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 9 } arrisCmDoc30DhcpExtendedSrvDUIDV6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "server DUID." ::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 10 } arrisCmDoc30DhcpExtendedCmParametersTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedCmParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for the DHCP cm Parameters." ::= { arrisCmDoc30DhcpExtended 7} arrisCmDoc30DhcpExtendedCmParametersEntry OBJECT-TYPE SYNTAX ArrisCmDoc30DhcpExtendedCmParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the MIB variables required for the DHCP cm Parameters." INDEX { arrisCmDoc30DhcpExtendedCmParametersIndex } ::= { arrisCmDoc30DhcpExtendedCmParametersTable 1 } ArrisCmDoc30DhcpExtendedCmParametersEntry ::= SEQUENCE { arrisCmDoc30DhcpExtendedCmParametersIndex INTEGER, arrisCmDoc30DhcpExtendedCmParametersType INTEGER, arrisCmDoc30DhcpExtendedCmIpAddr InetAddress, arrisCmDoc30DhcpExtendedCmSubNetMask InetAddress, arrisCmDoc30DhcpExtendedCmPrefix INTEGER, arrisCmDoc30DhcpExtendedCmGatewayIpAddr InetAddress, arrisCmDoc30DhcpExtendedCmConfigFile SnmpAdminString, arrisCmDoc30DhcpExtendedCmDUIDV6 DisplayString } arrisCmDoc30DhcpExtendedCmParametersIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used to order the arrisCmDoc30DhcpExtendedCmParametersTable entries." ::= { arrisCmDoc30DhcpExtendedCmParametersEntry 1 } arrisCmDoc30DhcpExtendedCmParametersType OBJECT-TYPE SYNTAX INTEGER { dhcpv4 (0), dhcpv6 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This mib displays the Dhcp Type(dhcpv4,dhcpv6)." ::= { arrisCmDoc30DhcpExtendedCmParametersEntry 2 } arrisCmDoc30DhcpExtendedCmIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the currently leased IP address ." ::= { arrisCmDoc30DhcpExtendedCmParametersEntry 3 } arrisCmDoc30DhcpExtendedCmSubNetMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current IP subnet mask in use." ::= {arrisCmDoc30DhcpExtendedCmParametersEntry 4 } arrisCmDoc30DhcpExtendedCmPrefix OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current IP Prefix in use." ::= {arrisCmDoc30DhcpExtendedCmParametersEntry 5 } arrisCmDoc30DhcpExtendedCmGatewayIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the current IP gateway address in use." ::= { arrisCmDoc30DhcpExtendedCmParametersEntry 6 } arrisCmDoc30DhcpExtendedCmConfigFile OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This displays the CM configuration file to be retrived." ::= { arrisCmDoc30DhcpExtendedCmParametersEntry 7 } arrisCmDoc30DhcpExtendedCmDUIDV6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "CM DUID." ::= { arrisCmDoc30DhcpExtendedCmParametersEntry 8 } arrisCmDoc30DhcpExtendedDnsSvrTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedDnsSvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains information for DNS Servers." ::= { arrisCmDoc30DhcpExtended 8 } arrisCmDoc30DhcpExtendedDnsSvrEntry OBJECT-TYPE SYNTAX ArrisCmDoc30DhcpExtendedDnsSvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains information for DNS Servers." INDEX { arrisCmDoc30DhcpExtendedDnsSvrIPIndex } ::= { arrisCmDoc30DhcpExtendedDnsSvrTable 1 } ArrisCmDoc30DhcpExtendedDnsSvrEntry ::= SEQUENCE { arrisCmDoc30DhcpExtendedDnsSvrIPIndex Unsigned32, arrisCmDoc30DhcpExtendedDnsSvrIPAddrType INTEGER, arrisCmDoc30DhcpExtendedDnsSvrIPAddr InetAddress } arrisCmDoc30DhcpExtendedDnsSvrIPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DNS Servers IP Index." ::= { arrisCmDoc30DhcpExtendedDnsSvrEntry 1 } arrisCmDoc30DhcpExtendedDnsSvrIPAddrType OBJECT-TYPE SYNTAX INTEGER { dhcpv4 (0), dhcpv6 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This mib displays the Dhcp Type(dhcpv4,dhcpv6)." ::= { arrisCmDoc30DhcpExtendedDnsSvrEntry 2 } arrisCmDoc30DhcpExtendedDnsSvrIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address for DNS Servers." ::= { arrisCmDoc30DhcpExtendedDnsSvrEntry 3 } -- arrisCmDoc30IfBaseObjectsExtended MIB objects -- arrisCmDoc30IfUpstreamChannelExtendedTable OBJECT-TYPE SYNTAX SEQUENCE OF ArrisCmDoc30IfUpstreamChannelExtendedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table Extends to describe the attributes of attached upstream channels." ::= { arrisCmDoc30IfBaseObjectsExtended 2 } arrisCmDoc30IfUpstreamChannelExtendedEntry OBJECT-TYPE SYNTAX ArrisCmDoc30IfUpstreamChannelExtendedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended list of attributes for a single upstream channel, like Symbol Rate, Modulation and so on." INDEX { ifIndex } ::= { arrisCmDoc30IfUpstreamChannelExtendedTable 1 } ArrisCmDoc30IfUpstreamChannelExtendedEntry ::= SEQUENCE { arrisCmDoc30IfUpChannelExtendedId Integer32, arrisCmDoc30IfUpChannelExtendedSymbolRate Integer32, arrisCmDoc30IfUpChannelExtendedModulation INTEGER } arrisCmDoc30IfUpChannelExtendedId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The CMTS identification of the upstream channel." ::= { arrisCmDoc30IfUpstreamChannelExtendedEntry 1 } arrisCmDoc30IfUpChannelExtendedSymbolRate OBJECT-TYPE SYNTAX Integer32 (0..160000) MAX-ACCESS read-only STATUS current DESCRIPTION "The Symbol Rate in kSym/s of this upstream interface. This object returns 0 if the interface symbol rate is undefined or unknown." ::= { arrisCmDoc30IfUpstreamChannelExtendedEntry 2 } arrisCmDoc30IfUpChannelExtendedModulation OBJECT-TYPE SYNTAX INTEGER { qpsk (1), qam8 (2), qam16 (3), qam32 (4), qam64 (5), qam128 (6), qam256 (7), err (-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The modulation type of this upstream interface, This object returns err(-1) if the interface modulation is undefined or unknown." ::= { arrisCmDoc30IfUpstreamChannelExtendedEntry 3 } -- arrisCmDoc30PingMgmt MIB objects -- arrisCmDoc30PingTargetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of internet address used for arrisRouterPingTargetAddress. This object may be changed while a ping is in progress." DEFVAL { ipv4 } ::= { arrisCmDoc30PingMgmt 1 } arrisCmDoc30PingTargetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the internet address of the entity to be pinged. Note that if an all-zeros value is specified for this object, then the ping will be sent to the default gateway, if one exists. This object may be changed while a ping is in progress." ::= { arrisCmDoc30PingMgmt 2 } arrisCmDoc30PingNumPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the client to set the number of pings to be sent. This can be set to any number between 1 and (2^32 - 1), or can be set to 'infinite' by setting the value to 0. Note that if set to infinite, then the ping must be stopped explicitly in order to get it to stop. This object may be changed while a ping is in progress." DEFVAL { 3 } ::= { arrisCmDoc30PingMgmt 3 } arrisCmDoc30PingPktSize OBJECT-TYPE SYNTAX Unsigned32 (64..1518) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the client to set the initial size of the ping packets that will be sent. This size includes the LLC header, IP header, ICMP header, and the CRC32 at the end. You must specify values between 64 and 1518, which are the min and max size Ethernet frames. This object may be changed while a ping is in progress." DEFVAL { 64 } ::= { arrisCmDoc30PingMgmt 4 } arrisCmDoc30PingInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the client to set the amount of time (in milliseconds) that the device will sleep before sending a ping. Generally, this is the time between when a ping reply is received and when the next ping will be sent. Note that the amount of time between sending one ping and sending the next ping varies depending on whether or not you enable waiting for replies, and how long it takes to receive the reply. If waiting for replies is disabled, then this is the time between sending one ping and sending the next ping. This object may be changed while a ping is in progress." DEFVAL { 0 } ::= { arrisCmDoc30PingMgmt 5 } arrisCmDoc30PingTimeout OBJECT-TYPE SYNTAX Integer32 (-1..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the client to set the amount of time (in milliseconds) that the device should wait for a reply after sending a ping. If set to any non-negative value, then the device will send a ping and wait for a response for the specified amount of time. Event if set to 0, the thread will check for and process a reply packet. If set to -1, then the device will not wait at all, and won't even check for any replies. This object may be changed while a ping is in progress." DEFVAL { 5000 } ::= { arrisCmDoc30PingMgmt 6 } arrisCmDoc30PingVerifyReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables verification of ping replies. If enabled, and if waiting for replies is enabled, then if a reply is received, it will verify that it matches the ping that was sent, and that all of the data is intact. This object may be changed while a ping is in progress." DEFVAL { true } ::= { arrisCmDoc30PingMgmt 7 } arrisCmDoc30PingIpStackNumber OBJECT-TYPE SYNTAX Integer32 (300) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the client to select the IP stack from which the pings will be sent. Specifying 0 means that the pings will be sent from the same IP stack on which this MIB is hosted. This object may not be changed while a ping is in progress." DEFVAL { 300 } ::= { arrisCmDoc30PingMgmt 8 } arrisCmDoc30PingStartStop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Starts or stops the pings, as well as indicating whether a ping is in progress when read. If a ping is already in progress and this object is set to true(1), then the ping will continue but the ping statistics will be reset. This object may be changed while a ping is in progress." DEFVAL { true } ::= { arrisCmDoc30PingMgmt 9 } arrisCmDoc30PingPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent since the ping was started." ::= { arrisCmDoc30PingMgmt 10 } arrisCmDoc30PingRepliesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of replies received since the ping was started." ::= { arrisCmDoc30PingMgmt 11 } arrisCmDoc30PingRepliesVerified OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of replies which were verified since the ping was started." ::= { arrisCmDoc30PingMgmt 12 } arrisCmDoc30PingOctetsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of octets that have been sent in pings since the ping was started." ::= { arrisCmDoc30PingMgmt 13 } arrisCmDoc30PingOctetsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of octets that have been sent in pings since the ping was started." ::= { arrisCmDoc30PingMgmt 14 } arrisCmDoc30PingIcmpErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total ICMP errors which have been received since the ping was started." ::= { arrisCmDoc30PingMgmt 15 } arrisCmDoc30PingLastIcmpError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates value of the last ICMP error which was received, if any. If there have been no errors, this object will have a value of 0." ::= { arrisCmDoc30PingMgmt 16 } arrisCmDoc30PingAverageRtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The current average ping round-trip-time (RTT)." ::= { arrisCmDoc30PingMgmt 17 } arrisCmDoc30PingMinRtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { arrisCmDoc30PingMgmt 18 } arrisCmDoc30PingRepliesMaxRtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { arrisCmDoc30PingMgmt 19 } -- arrisCmDoc30TraceRtMgmt MIB objects -- arrisCmDoc30TraceRtTargAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of internet address used for arrisRouterTraceRtTargetAddress." DEFVAL { ipv4 } ::= { arrisCmDoc30TraceRtMgmt 1 } arrisCmDoc30TraceRtTargetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the internet address of the entity for the trace route." ::= { arrisCmDoc30TraceRtMgmt 2 } arrisCmDoc30TraceRtMaxHops OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of hops for the trace route" ::= { arrisCmDoc30TraceRtMgmt 3 } arrisCmDoc30TraceRtDataSize OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The data size of the trace route packet" ::= { arrisCmDoc30TraceRtMgmt 4 } arrisCmDoc30TraceRtResolveHosts OBJECT-TYPE SYNTAX INTEGER { noResolve(0), resolve(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to resolve host names" DEFVAL { resolve } ::= { arrisCmDoc30TraceRtMgmt 5 } arrisCmDoc30TraceRtBasePort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Base port to use for trace route" ::= { arrisCmDoc30TraceRtMgmt 6 } arrisCmDoc30TraceRtStart OBJECT-TYPE SYNTAX INTEGER { traceRouteNotRunning(0), traceRouteRunning(1), startTrace(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Start a running trace route. Will return traceRouteRunning(0) if a trace route is currently running. " ::= { arrisCmDoc30TraceRtMgmt 7 } arrisCmDoc30TraceRtLog OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent output log for trace route. Up to 255 bytes. Individual lines are separated by a newline \n" ::= { arrisCmDoc30TraceRtMgmt 8 } arrisCmDoc30TraceRtTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time-out value, in seconds, for a traceroute request." DEFVAL { 3 } ::= { arrisCmDoc30TraceRtMgmt 9 } arrisCmDoc30TraceRtDiffServ OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the value to store in the Type of Service (TOS) octet in the IPv4 header or in the Traffic Class octet in the IPv6 header, respectively, of the IP packet used to encapsulate the traceroute probe. The octet to be set in the IP header contains the Differentiated Services (DS) Field in the six most significant bits. This option can be used to determine what effect an explicit DS Field setting has on a traceroute response. Not all values are legal or meaningful. A value of 0 means that the function represented by this option is not supported. DS Field usage is often not supported by IP implementations, and not all values are supported. Refer to RFC 2474 and RFC 3260 for guidance on usage of this field." REFERENCE "Refer to RFC 1812 for the definition of the IPv4 TOS octet and to RFC 2460 for the definition of the IPv6 Traffic Class octet. Refer to RFC 2474 and RFC 3260 for the definition of the Differentiated Services Field." DEFVAL { 0 } ::= { arrisCmDoc30TraceRtMgmt 10 } END