-- ***************************************************************************** -- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved -- $Id: fspia.mib,v 1.2 2020/02/03 08:01:54 siva Exp $ -- Aricent PPPoE Intermediate Agent[PIA] Proprietary MIB Definition -- This MIB contains scalars and tables used to configure a switch running -- Aricent PPPoE Intermediate Agent Snooping. -- ***************************************************************************** PIA-SNOOPING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32, Counter32 FROM SNMPv2-SMI RowStatus, MacAddress, TruthValue FROM SNMPv2-TC InterfaceIndex FROM IF-MIB; fspiasnp MODULE-IDENTITY LAST-UPDATED "200711010000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "ARICENT COMMUNICATIONS SOFTWARE 3460 Hillview Avenue, Palo Alto, CA 94304-1388, USA, Phone : +1-650-391-1088 E-mail:support@aricent.com" DESCRIPTION "The enterprise ID 29601 belongs to Aricent." REVISION "200711010000Z" DESCRIPTION "This is the proprietary MIB module for PPPoE Intermediate Agent[PIA] Snooping." ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 9 } -- ***************************************************************************** -- Groups in the MIB -- ***************************************************************************** fsPIASnpSystem OBJECT IDENTIFIER ::= { fspiasnp 1 } fsPIASnpVlan OBJECT IDENTIFIER ::= { fspiasnp 2 } -- ***************************************************************************** -- SCALARS -- ***************************************************************************** fsPIASnoopingSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to start or shutdown PPPoEIA Snooping feature in the system. When this object is set as 'start',resources required by PPPoE IA module are allocated & PPPoE IA feature starts running in the system. When this object is shutdown, all resources used by PPPoE IA module will be released to the system." DEFVAL { 1 } ::= { fsPIASnpSystem 1 } fsPIASnoopingAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable PPPoEIA Snooping globally in the system. When this object is set as 'enabled', the PPPoEIA Snooping Module will start the protocol operation. PPPoEIA Snooping should be enabled on per VLAN basis also for the feature to function. When this object is set as 'disabled', the PPPoEIA Snooping Module will stop the protocol operation." DEFVAL { 2 } ::= { fsPIASnpSystem 2 } fsPIATraceOption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable tracing in the PPPoE Intermediate Agent Module. A 32 bit integer is used to store the tracing level in the specified module. Different Tracing Levels - BIT 1 - Function Entry trace. BIT 2 - Function Exit trace. BIT 3 - Debug trace. BIT 4 - Failure Dump. BIT 5 - Trace the packet flow inside PPPoE IA module." DEFVAL { 8 } ::= { fsPIASnpSystem 3 } fsPIASessionTimeOut OBJECT-TYPE SYNTAX Integer32(0..600) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the PPPoE session timeout in seconds and is used to clear the PPPoE IA session table entries. If the value is set to zero, session timeout is disabled. Entries will get timed out in a period of 'T' to '2T' where T is the session timeout value configured. The reconfigured value of the timer will take effect only at the next restart of the timer" DEFVAL { 300 } ::= { fsPIASnpSystem 4 } -- ***************************************************************************** -- GROUPS -- ***************************************************************************** -- **************************** Vlan Entry ************************************* fsPIASnpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPIASnpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VLAN specific informations." ::= { fsPIASnpVlan 1 } fsPIASnpVlanEntry OBJECT-TYPE SYNTAX FsPIASnpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies each entry that contains the information whether PPPoE snooping is enabled/disabled on the given Vlan." INDEX { fsPIASnpContextId, fsPIASnpVlanId } ::= { fsPIASnpVlanTable 1 } FsPIASnpVlanEntry ::= SEQUENCE { fsPIASnpContextId Integer32, fsPIASnpVlanId Integer32, fsPIASnpVlanSnpStatus INTEGER, fsPIASnpVlanStatsRxPADI Counter32, fsPIASnpVlanStatsRxPADO Counter32, fsPIASnpVlanStatsRxPADR Counter32, fsPIASnpVlanStatsRxPADS Counter32, fsPIASnpVlanStatsRxPADT Counter32, fsPIASnpVlanStatsTxPkt Counter32, fsPIASnpVlanStatsTxGenError Counter32, fsPIASnpVlanStatsDroppedResUntrusted Counter32, fsPIASnpVlanStatsDroppedReqTrusted Counter32, fsPIASnpVlanStatsDroppedPkt Counter32, fsPIASnpVlanStatsClear TruthValue, fsPIASnpRowStatus RowStatus } fsPIASnpContextId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies switch instance/context to which this table-entry is associated." ::= { fsPIASnpVlanEntry 1 } fsPIASnpVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies Vlan ID of the VLAN to which this table-entry is associated." ::= { fsPIASnpVlanEntry 2 } fsPIASnpVlanSnpStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This objectis used to enable or disable PPPoE-IA Snooping in the given VLAN." DEFVAL { 2 } ::= { fsPIASnpVlanEntry 3 } fsPIASnpVlanStatsRxPADI OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADI packet recieved on this VLAN." ::= { fsPIASnpVlanEntry 4 } fsPIASnpVlanStatsRxPADO OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADO packet recieved on this VLAN." ::= { fsPIASnpVlanEntry 5} fsPIASnpVlanStatsRxPADR OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADR packet recieved on this VLAN." ::= { fsPIASnpVlanEntry 6 } fsPIASnpVlanStatsRxPADS OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADS packet recieved on this VLAN." ::= { fsPIASnpVlanEntry 7 } fsPIASnpVlanStatsRxPADT OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADT packet recieved on this VLAN." ::= { fsPIASnpVlanEntry 8} fsPIASnpVlanStatsTxPkt OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of packet transmitted on this VLAN." ::= { fsPIASnpVlanEntry 9 } fsPIASnpVlanStatsTxGenError OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of generic error packets transmitted on this VLAN" ::= { fsPIASnpVlanEntry 10 } fsPIASnpVlanStatsDroppedResUntrusted OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADS/PADO packets dropped which is received on untrusted port" ::= { fsPIASnpVlanEntry 11 } fsPIASnpVlanStatsDroppedReqTrusted OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of PADI/PADR packets dropped which is received on trusted port" ::= { fsPIASnpVlanEntry 12 } fsPIASnpVlanStatsDroppedPkt OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of packets discarded in this VLAN." ::= { fsPIASnpVlanEntry 13 } fsPIASnpVlanStatsClear OBJECT-TYPE SYNTAX TruthValue (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object clear the statistics." ::= { fsPIASnpVlanEntry 14 } fsPIASnpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies row-status of PPPOE Intermediate agent entry." ::= { fsPIASnpVlanEntry 15 } -- *************************** Session Table *********************************** fsPIASnpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPIASnpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the session informations for the PPPoE IA feature." ::= { fsPIASnpSystem 5 } fsPIASnpSessionEntry OBJECT-TYPE SYNTAX FsPIASnpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies each entry that contains the PPPOE session information. An entry in this table gets created when PADI packet is received at the switch on untrusted port. Entries in this table get aged out on fsPIASessionTimeOut." INDEX { fsPIASnpSessionVlanId, fsPIASnpSessionMacAddress } ::= { fsPIASnpSessionTable 1 } FsPIASnpSessionEntry ::= SEQUENCE { fsPIASnpSessionVlanId Integer32, fsPIASnpSessionMacAddress MacAddress, fsPIASnpSessionPortId InterfaceIndex, fsPIASnpSessionId Integer32 } fsPIASnpSessionVlanId OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the VLAN identifier associated to this entry." ::= { fsPIASnpSessionEntry 1 } fsPIASnpSessionMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the client MAC address associated with the PPPOE session" ::= { fsPIASnpSessionEntry 2 } fsPIASnpSessionPortId OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the interface index of the client associated with the PPPOE session" ::= { fsPIASnpSessionEntry 3 } fsPIASnpSessionId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the session Id associated with the PPPOE session. Initially the session entry will be created with session Id as 0. This object will be updated when session id is allocated for this PPPoE session by the server through PADS packet" ::= { fsPIASnpSessionEntry 4 } END