-- Copyright (C) 2010-2012 Aricent Group . All Rights Reserved -- ********************************************************************* -- * $Id: fshlsp.mib,v 1.4 2012/09/07 09:52:05 siva Exp $ -- ********************************************************************* Aricent-MPLS-HLSP-MIB DEFINITIONS ::= BEGIN IMPORTS MplsTunnelIndex, MplsTunnelInstanceIndex, MplsExtendedTunnelId FROM MPLS-TC-STD-MIB MODULE-IDENTITY, OBJECT-TYPE, enterprises, Unsigned32 FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC ; fsHlspMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "All rights reserved" REVISION "201209050000Z" DESCRIPTION "The Proprietory MIB for managing object definitions for Hierarchical-LSP." ::= {enterprises aricent-communication-holding-ltd(29601) iss(2) 58} fsMplsHlspConfigObjects OBJECT IDENTIFIER ::= { fsHlspMIB 1} -- Hierarchical LSP Stack Table(H-LSP) starts fsMplsLSPMapTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLSPMapTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping attribute of the tunnels to be stacked or stitched together is defined in this table. A row in mplsTunnelTable needs to be created first for the tunnels to be stacked or stitched. This table allows MPLS tunnels to be stacked with the H-LSP or two tunnels to be stitched together." ::= { fsMplsHlspConfigObjects 1 } fsMplsLSPMapTunnelEntry OBJECT-TYPE SYNTAX FsMplsLSPMapTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents the stacking/stitching between the tunnel and the associated tunnel. It is indexed by the entities that uniquely identifies the tunnel. The entry can be created only when both the tunnels are created in mplsTunnelTable.When two tunnels are to be stacked, the first four indices refers to the HLSP tunnel and the next four indices refers to the Service tunnel to be stacked over HLSP." INDEX { fsMplsLSPMapTunnelIndex, fsMplsLSPMapTunnelInstance, fsMplsLSPMapTunnelIngressLSRId, fsMplsLSPMapTunnelEgressLSRId, fsMplsLSPMapSubTunnelIndex, fsMplsLSPMapSubTunnelInstance, fsMplsLSPMapSubTunnelIngressLSRId, fsMplsLSPMapSubTunnelEgressLSRId } ::= { fsMplsLSPMapTunnelTable 1 } FsMplsLSPMapTunnelEntry ::= SEQUENCE { fsMplsLSPMapTunnelIndex MplsTunnelIndex, fsMplsLSPMapTunnelInstance MplsTunnelInstanceIndex, fsMplsLSPMapTunnelIngressLSRId MplsExtendedTunnelId, fsMplsLSPMapTunnelEgressLSRId MplsExtendedTunnelId, fsMplsLSPMapSubTunnelIndex MplsTunnelIndex, fsMplsLSPMapSubTunnelInstance MplsTunnelInstanceIndex, fsMplsLSPMapSubTunnelIngressLSRId MplsExtendedTunnelId, fsMplsLSPMapSubTunnelEgressLSRId MplsExtendedTunnelId, fsMplsLSPMaptunnelOperation Unsigned32, fsMplsLSPMaptunnelRowStatus RowStatus } fsMplsLSPMapTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a set of tunnel instance between a pair of ingress and egress LSRs. This refers to the Tunnel index of HLSP if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 1 } fsMplsLSPMapTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. This refers to the Tunnel instance of HLSP if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 2 } fsMplsLSPMapTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the ingress LSR associated with this tunnel instance. This refers to the Tunnel ingressid of HLSP if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 3 } fsMplsLSPMapTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the egress LSR associated with this tunnel instance. This refers to the Tunnel egressid of HLSP if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 4 } fsMplsLSPMapSubTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a sub tunnel instance between a pair of ingress and egress LSRs.This refers to the Tunnel index of Service tunnel if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 5 } fsMplsLSPMapSubTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a particular instance of a sub-tunnel between a pair of ingress and egress LSRs. This refers to the Tunnel instance of Service tunnel if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 6 } fsMplsLSPMapSubTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the ingress LSR associated with this sub-tunnel instance. This refers to the Tunnel ingressid of Service tunnel if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 7 } fsMplsLSPMapSubTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the egress LSR associated with this sub tunnel instance. This refers to the Tunnel egressid of Service tunnel if 'fsMplsLSPMaptunnelOperation' is set to stack." ::= { fsMplsLSPMapTunnelEntry 8 } fsMplsLSPMaptunnelOperation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the operation to be performed with the mapped tunnels. The Operation can be either stack or stitch. The value of 1 specifies that the service tunnel is to be stacked with the HLSP. The value of 2 refers that the two tunnels are to be stitched together." ::= { fsMplsLSPMapTunnelEntry 9 } fsMplsLSPMaptunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to create, and/or delete a row in this table. The Row can be made active only when 'fsMplsLSPMaptunnelOperation' is set either to 'stack/stitch'. This object cannot be set to 'Not-In-Service' to modify the 'fsMplsLSPMaptunnelOperation' that is set. In that case, the row in this table needs to be deleted and re-created." ::= { fsMplsLSPMapTunnelEntry 10 } -- Hierarchical LSP Stack Table(H-LSP) ends -- Hierarchical LSP Table starts fsMplsHLSPTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsHLSPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains extension to the mplsTunnelTable to represent infomation specific to HLSP tunnels. This table will be populated when bit for HLSP is set in 'fsMplsTunnelType' of fsmpte.mib." ::= { fsMplsHlspConfigObjects 2 } fsMplsHLSPEntry OBJECT-TYPE SYNTAX FsMplsHLSPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table will be created when the H-LSP bit is set in the fsMplsTunnelType. The objects in this table are updated when the tunnels are stacked over this H-LSP by creating a row in fsMplsLSPMapTunnelTable and setting 'fsMplsLSPMapTunnelOperation' as 'stack'. It reports the H-LSP Available BW and the number of tunnels stacked on top of H-LSP." INDEX { fsMplsHLSPIndex, fsMplsHLSPInstance, fsMplsHLSPIngressLSRId, fsMplsHLSPEgressLSRId } ::= { fsMplsHLSPTable 1 } FsMplsHLSPEntry ::= SEQUENCE { fsMplsHLSPIndex MplsTunnelIndex, fsMplsHLSPInstance MplsTunnelInstanceIndex, fsMplsHLSPIngressLSRId MplsExtendedTunnelId, fsMplsHLSPEgressLSRId MplsExtendedTunnelId, fsMplsHLSPAvailableBW Unsigned32, fsMplsHLSPNoOfStackedTunnels Unsigned32 } fsMplsHLSPIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a H-LSP tunnel instance between a pair of ingress and egress LSRs." ::= { fsMplsHLSPEntry 1 } fsMplsHLSPInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a particular instance of a H-LSP tunnel between a pair of ingress and egress LSRs." ::= { fsMplsHLSPEntry 2 } fsMplsHLSPIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the ingress LSR associated with this H-LSP tunnel instance." ::= { fsMplsHLSPEntry 3 } fsMplsHLSPEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the egress LSR associated with this H-LSP tunnel instance." ::= { fsMplsHLSPEntry 4 } fsMplsHLSPAvailableBW OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the available BandWidth of the H-LSP. The value of this object will be same as that of mplsTunnelResourceMaxRate when no tunnels are stacked on to this H-LSP. If any Service tunnel is stacked over this H-LSP, then this is obtained by calculating the remaining BW other than that used by the stacked tunnels." ::= { fsMplsHLSPEntry 5 } fsMplsHLSPNoOfStackedTunnels OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of Service tunnels stacked on to this H-LSP tunnel." ::= { fsMplsHLSPEntry 6 } -- Hierarchical LSP Table end END