-- Copyright (C) 2012 Aricent Group . All Rights Reserved --****************************************************************************** --$Id: fsusermgm.mib,v 1.6 2012/09/07 09:52:06 siva Exp $ -- --Description : This file contains MIB definitions for FPAM module. -- --******************************************************************************/ -- ISS MIB Definition -- MIB for 'Password Authentication Management' -- The 'User Management' MIB definition is as follows: ARICENT-USERMGM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, enterprises FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC; --- futuresoftware OBJECT IDENTIFIER ::= { enterprises 2076 } fsusrMgmt MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "This MIB implementation is used to maintain User account management" REVISION "201209050000Z" DESCRIPTION "This MIB implementation is used to maintain User account management" ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 70 } fsusrMgmtStats OBJECT IDENTIFIER ::= { fsusrMgmt 1 } fsusrMgmtUserList OBJECT IDENTIFIER ::= { fsusrMgmt 2 } fsusrMgmtStatsNumOfUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of users who have created account." ::= { fsusrMgmtStats 1 } fsusrMgmtStatsActiveUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of users who have currently logged in via different sessions will be tracked here." ::= { fsusrMgmtStats 2 } fsusrMgmtMinPasswordLen OBJECT-TYPE SYNTAX Unsigned32 (8..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This is to configure the minimum length of password by the administrator. Minimum length value must be 8" ::= { fsusrMgmtStats 3 } fsusrMgmtPasswdValidationChars OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This is to configure the type of characters to be considered for password validation rules. Following four type of characters are considered - Alphabetical lower case, Alphabetical upper case, numerical and special characters. This object takes values as bit mask. BIT 0 - Alphabetical lower case characters. BIT 1 - Alphabetical upper case characters. BIT 2 - Numeric characters. BIT 3 - Special characters. Note: BIT 0 - Least significant bit BIT 3 - Most significant bit For example, setting the password validation as 3 (i.e., 0011), will enable validation corresponds to first (i.e., lower case) and second bit (i.e., upper case). Setting all the bits enables validation of lower case, upper case, numeric and special symbols in password. By default, all flags will be enabled." DEFVAL { 15 } ::= { fsusrMgmtStats 4 } fsusrMgmtPasswdValidateNoOfLowerCase OBJECT-TYPE SYNTAX Unsigned32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This is to configure the minimum number of lower case characters that are to be present in the password. If the given password has less than the configured number of lower case characters, it will not be allowed." DEFVAL { 1 } ::= { fsusrMgmtStats 5 } fsusrMgmtPasswdValidateNoOfUpperCase OBJECT-TYPE SYNTAX Unsigned32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This is to configure the minimum number of upper case characters that are to be present in the password. If the given password has less than the configured number of upper case characters, it will not be allowed." DEFVAL { 1 } ::= { fsusrMgmtStats 6 } fsusrMgmtPasswdValidateNoOfNumericals OBJECT-TYPE SYNTAX Unsigned32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This is to configure the minimum number of numerical characters that are to be present in the password. If the given password has less than the configured number of numerical characters, it will not be allowed." DEFVAL { 1 } ::= { fsusrMgmtStats 7 } fsusrMgmtPasswdValidateNoOfSplChars OBJECT-TYPE SYNTAX Unsigned32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "This is to configure the minimum number of special characters that are to be present in the password. If the given password has less than the configured number of special characters, it will not be allowed." DEFVAL { 1 } ::= { fsusrMgmtStats 8 } fsusrMgmtPasswdMaxLifeTime OBJECT-TYPE SYNTAX Unsigned32 (0..366) MAX-ACCESS read-write STATUS current DESCRIPTION "The time after which the user password has to be expired (in days). By Default, the Password Max Life Time is set to 0 and password wont expire." DEFVAL { 0 } ::= { fsusrMgmtStats 9 } fsusrMgmtStatsEnableUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of enabled users" ::= { fsusrMgmtStats 10 } fsusrMgmtStatsDisableUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of disabled users" ::= { fsusrMgmtStats 11 } fsusrMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF FsUsrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This fsusrMgmtTable table contains the user account details. User login information like username, password, previlege, number of logins happened are stored in this table." ::= { fsusrMgmtUserList 1 } fsusrMgmtEntry OBJECT-TYPE SYNTAX FsUsrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry of a user account." INDEX { fsusrMgmtUserName, fsusrMgmtAuthString } ::= { fsusrMgmtTable 1 } FsUsrMgmtEntry ::= SEQUENCE { fsusrMgmtUserName DisplayString, fsusrMgmtAuthString DisplayString, fsusrMgmtUserPassword DisplayString, fsusrMgmtUserPrivilege Unsigned32, fsusrMgmtUserLoginCount Integer32, fsusrMgmtUserStatus INTEGER, fsusrMgmtUserLockRelTime Unsigned32, fsusrMgmtUserRowStatus RowStatus, fsusrMgmtUserConfirmPwd DisplayString } fsusrMgmtUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the login user. Name must be unique to differ from other user." ::= { fsusrMgmtEntry 1 } fsusrMgmtAuthString OBJECT-TYPE SYNTAX DisplayString (SIZE (6..42)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is to provide security to configure User management via SNMP. The format of fsusrMgmtAuthString shall be `adminusername:password`. Values for this fsusrMgmtTable can be set only when this index is set with proper string format (ie. default/admin username and password should be known to the user to add/edit the entry in this table)." ::= { fsusrMgmtEntry 2 } fsusrMgmtUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (8..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Enter the text values for password. This value is used to login along with the user name" DEFVAL { "Password123#" } ::= { fsusrMgmtEntry 3 } fsusrMgmtUserPrivilege OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The privilege number of the user. Each user are created with privilege value to set the level of access of that user." DEFVAL { 1 } ::= { fsusrMgmtEntry 4 } fsusrMgmtUserLoginCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "To track number of times login and logout has happened. This count is incremented irrespective of any mode of user login via cli, web, telnet or ssh." ::= { fsusrMgmtEntry 5 } fsusrMgmtUserStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is to indicate the user status it can be enable or disable By Default the Status of user is enable." DEFVAL { enable } ::= { fsusrMgmtEntry 6 } fsusrMgmtUserLockRelTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time after which the password locked user can be released automatically." DEFVAL { 0 } ::= { fsusrMgmtEntry 7 } fsusrMgmtUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of the entry." ::= { fsusrMgmtEntry 8 } fsusrMgmtUserConfirmPwd OBJECT-TYPE SYNTAX DisplayString (SIZE (8..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Enter the text values for confirmation password. This field is used to confirm the password with the fsusrMgmtUserPassword" DEFVAL { "Password123#" } ::= { fsusrMgmtEntry 9 } END