-- Copyright (C) 2009-2012 Aricent Group . All Rights Reserved -- $Id: fsmirtm.mib,v 1.14 2016/02/08 10:40:15 siva Exp $ ARICENT-RTMMI-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, IpAddress, Integer32,Unsigned32, enterprises FROM SNMPv2-SMI TruthValue, RowStatus FROM SNMPv2-TC; fsMIRtm MODULE-IDENTITY LAST-UPDATED "201209110000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION " This mib module is for Route redistribution support provided by Route Table Manager with Virtual Context support (Virtual routing and forwarding support)" REVISION "201209110000Z" DESCRIPTION " This mib module is for Route redistribution support provided by Route Table Manager with Virtual Context support (Virtual routing and forwarding support)" ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 31} -- RTM General Variables -- These parameters apply globally to the RTMv4 Process. fsMIRtmGeneralGroup OBJECT IDENTIFIER ::= { fsMIRtm 1 } -- SCALAR VARIABLE fsMIRtmThrottleLimit OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "In order to avoid CPU hogs while processing the routes, the number of routes being processed is restricted via this throlle limit." DEFVAL { 1000 } ::= { fsMIRtmGeneralGroup 1} fsMIEcmpAcrossProtocolAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables ECMP across protocols feature." DEFVAL { enable } ::= { fsMIRtmGeneralGroup 2 } fsMIRtmRouteLeakStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable VRF Route Leaking between Default VRF and Non-Default VRF." DEFVAL { disable } ::= { fsMIRtmGeneralGroup 3 } -- SCALAR END fsMIRtmTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIRtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the parameters of RTM's Virtual context" ::= { fsMIRtm 2 } fsMIRtmEntry OBJECT-TYPE SYNTAX FsMIRtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the parameters of one of the RTM's virtual context" INDEX { fsMIRtmContextId } ::= { fsMIRtmTable 1 } FsMIRtmEntry ::= SEQUENCE { fsMIRtmContextId Integer32, fsMIRrdRouterId IpAddress, fsMIRrdFilterByOspfTag INTEGER, fsMIRrdFilterOspfTag Integer32, fsMIRrdFilterOspfTagMask Integer32, fsMIRrdRouterASNumber Integer32, fsMIRrdAdminStatus INTEGER, fsMIRrdForce INTEGER, fsMIRTMIpStaticRouteDistance Integer32 } fsMIRtmContextId OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 32-bit unique context id identifing the RTM virtual Context Minimum value of context ID is 0 (this is for defualt Virtual context. The Max context ID is system dependent and the value is taken care in virtual context manager MIB" ::= { fsMIRtmEntry 1 } fsMIRrdRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The BGP/OSPF Router Id for the RTM Virtual context." ::= { fsMIRtmEntry 2 } fsMIRrdFilterByOspfTag OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable distribution of routes from OSPF to BGP/IDRP based on the OSPF tag or the various subfields of the OSPF tag (ref RFC1745 sec 2.1). This filter takes precedence over the common RRD control table." DEFVAL { disable } ::= { fsMIRtmEntry 3 } fsMIRrdFilterOspfTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF tag based on which routes have to be filtered for export to BGP/IDRP" ::= { fsMIRtmEntry 4 } fsMIRrdFilterOspfTagMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The bitmask to be applied to fsRrdFilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering." DEFVAL { -1 } ::= { fsMIRtmEntry 5 } fsMIRrdRouterASNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Autonomous system number in which this RTM Virtual context is running." DEFVAL { 0 } ::= { fsMIRtmEntry 6 } fsMIRrdAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Admin status of this RTM Virtual Context. This object can be set to enabled only after setting the AS number and the Router ID to a valid value." DEFVAL { disabled } ::= { fsMIRtmEntry 7 } fsMIRrdForce OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " An option for giving access to the user to change the autonomous number and the router-id and send the update message to the registered protocol." DEFVAL { disabled } ::= { fsMIRtmEntry 8} fsMIRTMIpStaticRouteDistance OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default administrative distance for IPv4 static routes." ::= { fsMIRtmEntry 9 } fsMIRrdControlTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIRrdControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control Table for configuring routes allowed/denied for export, in the virtual RTM context." ::= { fsMIRtm 3 } fsMIRrdControlEntry OBJECT-TYPE SYNTAX FsMIRrdControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of fsMIRrdControlTable." INDEX { fsMIRtmContextId, fsMIRrdControlDestIpAddress, fsMIRrdControlNetMask } ::= { fsMIRrdControlTable 1 } FsMIRrdControlEntry ::= SEQUENCE { fsMIRrdControlDestIpAddress IpAddress, fsMIRrdControlNetMask IpAddress, fsMIRrdControlSourceProto INTEGER, fsMIRrdControlDestProto Integer32, fsMIRrdControlRouteExportFlag INTEGER, fsMIRrdControlRowStatus RowStatus } fsMIRrdControlDestIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address or the reserved address (Class E) value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the fsRrdControlNetMask object is not equal to x." ::= { fsMIRrdControlEntry 1 } fsMIRrdControlNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipCidrRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRoute- Dest. The mask is also used to specify the range of IP addresses. For Eg. Destination Net = 128.11.0.0 Net Mask = 255.255.0.0 specifies the range of routes starting from 128.11.0.0 to 121.11.255.255. For specifying all routes give Destination Net = 0.0.0.0 Net Mask = 255.255.255.255" ::= { fsMIRrdControlEntry 2 } fsMIRrdControlSourceProto OBJECT-TYPE SYNTAX INTEGER { any (0), -- interface based routes other (1), -- not specified local (2), -- local interface netmgmt (3), -- static route icmp (4), -- result of ICMP Redirect egp (5), -- Exterior Gateway Protocol ggp (6), -- Gateway-Gateway Protocol hello (7), -- FuzzBall HelloSpeak rip (8), -- Berkeley RIP or RIP-II isIs (9), -- Dual IS-IS esIs (10), -- ISO 9542 ciscoIgrp (11), -- Cisco IGRP bbnSpfIgp (12), -- BBN SPF IGP ospf (13), -- Open Shortest Path First bgp (14), -- Border Gateway Protocol idpr (15), -- InterDomain Policy Routing ciscoEigrp (16) -- Cisco EIGRP } MAX-ACCESS read-write STATUS current DESCRIPTION "The Identifier of the source routing protocol. A value of zero will be interpreted as 'any', which may be used to configure interface based route redistribution." DEFVAL { other } ::= { fsMIRrdControlEntry 3} fsMIRrdControlDestProto OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The identifier of the destination routing protocol. This field is a bit mask, a 1 indicates that the route has to be exported to the routing protocol corresponding to the bit-position. +---------------------------------------------------+ | ciscoEigrp | idpr | bgp | ospf | +---------------------------------------------------+ | 15 | 14 | 13 | 12 | +---------------------------------------------------+ | bbnSpfIgp | ciscoIgrp | esIs | isIs | +---------------------------------------------------+ | 11 | 10 | 9 | 8 | +---------------------------------------------------+ | rip | hello | ggp | egp | +---------------------------------------------------+ | 7 | 6 | 5 | 4 | +---------------------------------------------------+ | icmp | netmgmt | local | other | +---------------------------------------------------+ | 3 | 2 | 1 | 0 | +---------------------------------------------------+" DEFVAL { 0 } ::= { fsMIRrdControlEntry 4} fsMIRrdControlRouteExportFlag OBJECT-TYPE SYNTAX INTEGER { permit (1), deny (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This flag specifies whether the route is allowed for export or denied." DEFVAL { permit } ::= { fsMIRrdControlEntry 5} fsMIRrdControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row by which a new row can be created or deleted according to the SMIv2 conventions." ::= { fsMIRrdControlEntry 6 } --Routing Protocol Registration table. fsMIRrdRoutingProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIRrdRoutingProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Registration Table for the different routing protocols. This table is read-only and reflects the information of routing protocols held by the Route Table Manager." ::= { fsMIRtm 4 } fsMIRrdRoutingProtoEntry OBJECT-TYPE SYNTAX FsMIRrdRoutingProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in to the fsRrdRoutingProtoTable." INDEX { fsMIRtmContextId, fsMIRrdRoutingProtoId } ::= { fsMIRrdRoutingProtoTable 1 } FsMIRrdRoutingProtoEntry ::= SEQUENCE { fsMIRrdRoutingProtoId INTEGER, fsMIRrdRoutingRegnId Integer32, fsMIRrdRoutingProtoTaskIdent OCTET STRING, fsMIRrdRoutingProtoQueueIdent OCTET STRING, fsMIRrdAllowOspfAreaRoutes INTEGER, fsMIRrdAllowOspfExtRoutes INTEGER } fsMIRrdRoutingProtoId OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified local (2), -- local interface netmgmt (3), -- static route icmp (4), -- result of ICMP Redirect egp (5), -- Exterior Gateway Protocol ggp (6), -- Gateway-Gateway Protocol hello (7), -- FuzzBall HelloSpeak rip (8), -- Berkeley RIP or RIP-II isIs (9), -- Dual IS-IS esIs (10), -- ISO 9542 ciscoIgrp (11), -- Cisco IGRP bbnSpfIgp (12), -- BBN SPF IGP ospf (13), -- Open Shortest Path First bgp (14), -- Border Gateway Protocol idpr (15), -- InterDomain Policy Routing ciscoEigrp (16) -- Cisco EIGRP } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Identifier of the routing protocol registered with the RTM virtual context" ::= { fsMIRrdRoutingProtoEntry 1 } fsMIRrdRoutingRegnId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Registeration ID assigned by the RTM Virtual context for this Routing Protocol " ::= { fsMIRrdRoutingProtoEntry 2 } fsMIRrdRoutingProtoTaskIdent OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Name/Identifier of the Routing Task" ::= { fsMIRrdRoutingProtoEntry 3 } fsMIRrdRoutingProtoQueueIdent OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Name/Identifier of the Message Queue to which messages to the Routing Task are posted." ::= { fsMIRrdRoutingProtoEntry 4 } fsMIRrdAllowOspfAreaRoutes OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A single configuration parameter that enables administator to have a contol over PERMIT/deny of all OSPF inter-area and intra-area address/mask pairs to be exported into this routing protocol." DEFVAL { enable } ::= { fsMIRrdRoutingProtoEntry 5 } fsMIRrdAllowOspfExtRoutes OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A single configuration parameter that enables administator to have a contol over PERMIT/deny of all OSPF Type 1 and Type 2 Exteral address/mask pairs to be exported into this routing protocol." DEFVAL { enable } ::= { fsMIRrdRoutingProtoEntry 6 } -- RTM Common Route Table -- The RTM Common Route Table can be used to view all the -- routes present in the system. fsMIRtmCommonRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIRtmCommonRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Routing table. This table can be used to view all the routes present in the system" ::= { fsMIRtm 5 } fsMIRtmCommonRouteEntry OBJECT-TYPE SYNTAX FsMIRtmCommonRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { fsMIRtmContextId, fsMIRtmCommonRouteDest, fsMIRtmCommonRouteMask, fsMIRtmCommonRouteTos, fsMIRtmCommonRouteNextHop } ::= { fsMIRtmCommonRouteTable 1 } FsMIRtmCommonRouteEntry ::= SEQUENCE { fsMIRtmCommonRouteDest IpAddress, fsMIRtmCommonRouteMask IpAddress, fsMIRtmCommonRouteTos Integer32, fsMIRtmCommonRouteNextHop IpAddress, fsMIRtmCommonRouteIfIndex Integer32, fsMIRtmCommonRouteType INTEGER, fsMIRtmCommonRouteProto INTEGER, fsMIRtmCommonRouteAge Integer32, fsMIRtmCommonRouteInfo OBJECT IDENTIFIER, fsMIRtmCommonRouteNextHopAS Integer32, fsMIRtmCommonRouteMetric1 Integer32, fsMIRtmCommonRoutePrivateStatus TruthValue, fsMIRtmCommonRouteStatus RowStatus, fsMIRtmCommonRoutePreference Integer32 } fsMIRtmCommonRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the fsMIRtmCommonRouteMask object is not equal to x." ::= { fsMIRtmCommonRouteEntry 1 } fsMIRtmCommonRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the fsMIRtmCommonRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the fsMIRtmCommonRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the fsMIRtmCommonRouteDest object is not equal to fsMIRtmCommonRoute- Dest." ::= { fsMIRtmCommonRouteEntry 2 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. fsMIRtmCommonRouteTos OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30" ::= { fsMIRtmCommonRouteEntry 3 } fsMIRtmCommonRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { fsMIRtmCommonRouteEntry 4 } fsMIRtmCommonRouteIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." DEFVAL { 0 } ::= { fsMIRtmCommonRouteEntry 5 } fsMIRtmCommonRouteType OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified by this MIB reject (2), -- route which discards traffic local (3), -- local interface remote (4) -- remote destination } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes." ::= { fsMIRtmCommonRouteEntry 6 } fsMIRtmCommonRouteProto OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified local (2), -- local interface netmgmt (3), -- static route icmp (4), -- result of ICMP Redirect -- the following are all dynamic -- routing protocols egp (5), -- Exterior Gateway Protocol ggp (6), -- Gateway-Gateway Protocol hello (7), -- FuzzBall HelloSpeak rip (8), -- Berkeley RIP or RIP-II isIs (9), -- Dual IS-IS esIs (10), -- ISO 9542 ciscoIgrp (11), -- Cisco IGRP bbnSpfIgp (12), -- BBN SPF IGP ospf (13), -- Open Shortest Path First bgp (14), -- Border Gateway Protocol idpr (15), -- InterDomain Policy Routing ciscoEigrp (16) -- Cisco EIGRP } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols." ::= { fsMIRtmCommonRouteEntry 7 } fsMIRtmCommonRouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." DEFVAL { 0 } ::= { fsMIRtmCommonRouteEntry 8 } fsMIRtmCommonRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's fsMIRtmCommonRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value." ::= { fsMIRtmCommonRouteEntry 9 } fsMIRtmCommonRouteNextHopAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's fsMIRtmCommonRouteProto value. When this object is unknown or not relevant its value should be set to zero." DEFVAL { 0 } ::= { fsMIRtmCommonRouteEntry 10 } fsMIRtmCommonRouteMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's fsMIRtmCommonRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { fsMIRtmCommonRouteEntry 11 } fsMIRtmCommonRoutePrivateStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicapble only for static routes. If the private status is enabled, this route can not be redistributed to other routing protocols.Else the route can be considered for redistribution" ::= { fsMIRtmCommonRouteEntry 12 } fsMIRtmCommonRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { fsMIRtmCommonRouteEntry 13 } fsMIRtmCommonRoutePreference OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the preference for the method by which the route was learned. This value will be used by the forwarding algorithm to choose the best route." ::= { fsMIRtmCommonRouteEntry 14 } fsMIRtmRedTest OBJECT IDENTIFIER ::= { fsMIRtm 6 } -- RTM_RED TIME Group -- This group defines objects for RTM_RED TIME. fsMIRtmRedEntryTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time when the node starts entering active state from standby state " ::= { fsMIRtmRedTest 1 } fsMIRtmRedExitTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time when the node completes entering active state from standby state " ::= { fsMIRtmRedTest 2 } fsMIRtmMaximumBgpRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object configures the number of BGP routes to be programmed in RTM" ::= { fsMIRtm 7} fsMIRtmMaximumOspfRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object configures the number of OSPF routes to be programmed in RTM" ::= { fsMIRtm 8} fsMIRtmMaximumRipRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object configures the number of RIP routes to be programmed in RTM" ::= { fsMIRtm 9} fsMIRtmMaximumStaticRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object configures the number of STATIC routes to be programmed in RTM" ::= { fsMIRtm 10} fsMIRtmMaximumISISRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object configures the number of ISIS routes to be programmed in RTM" ::= { fsMIRtm 11} END