-- Copyright (C) 2015 Aricent. All Rights Reserved -- $Id: fsmsrst.mib,v 1.8 2016/02/18 09:47:31 siva Exp $ ARICENT-MIStdRSTP-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------------------- -- MIB for IEEE 802.1w Rapid Spanning Tree Protocol -- ------------------------------------------------------------- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC fsDot1dBridge, fsDot1dStp, fsDot1dStpPortEntry, fsDot1dStpEntry, BridgeId, Timeout FROM ARICENT-MIStdBRIDGE-MIB; fsRstpMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "The Bridge MIB Extension module for managing devices that support the multiple instance Rapid Spanning Tree Protocol defined by IEEE 802.1w." REVISION "201209050000Z" DESCRIPTION "The Bridge MIB Extension module for managing devices that support the multiple instance Rapid Spanning Tree Protocol defined by IEEE 802.1w." ::= { fsDot1dBridge 11 } fsRstpMIBObjects OBJECT IDENTIFIER ::= { fsRstpMIB 1 } -- ------------------------------------------------------------- -- groups in the P-BRIDGE MIB -- ------------------------------------------------------------- -- fsDot1dStp OBJECT IDENTIFIER ::= { fsRstpMIBObjects 1 } -- ------------------------------------------------------------- -- Addition to the fsDot1dStp group -- ------------------------------------------------------------- fsDot1dStpExtTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot1dStpExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ExtStpScalars per Virtual Context." ::= { fsDot1dStp 3 } fsDot1dStpExtEntry OBJECT-TYPE SYNTAX FsDot1dStpExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per Virtual Context Stp Scalars." AUGMENTS { fsDot1dStpEntry } ::= { fsDot1dStpExtTable 1 } FsDot1dStpExtEntry ::= SEQUENCE { fsDot1dStpVersion INTEGER, fsDot1dStpTxHoldCount INTEGER, fsDot1dStpPathCostDefault INTEGER } fsDot1dStpVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatible(0), rstp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w. New value may be defined as future versions of the protocol become available." REFERENCE "IEEE 802.1w clause 14.8.1, 17.12, 17.16.1" DEFVAL { rstp } ::= { fsDot1dStpExtEntry 1 } fsDot1dStpTxHoldCount OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate." REFERENCE "IEEE 802.1w clause 17.16.6" DEFVAL { 6 } ::= { fsDot1dStpExtEntry 2 } fsDot1dStpPathCostDefault OBJECT-TYPE SYNTAX INTEGER { stp8021d1998(1), stp8021t2001(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "******************Object is obsolete**************** The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t." REFERENCE "IEEE 802.1D & 802.1t Table 8-5" ::= { fsDot1dStpExtEntry 3 } fsDot1dStpExtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot1dStpExtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains port-specific Rapid Spanning Tree information." ::= { fsDot1dStp 4 } fsDot1dStpExtPortEntry OBJECT-TYPE SYNTAX FsDot1dStpExtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Rapid Spanning Tree information maintained by each port." AUGMENTS { fsDot1dStpPortEntry } ::= { fsDot1dStpExtPortTable 1 } FsDot1dStpExtPortEntry ::= SEQUENCE { fsDot1dStpPortProtocolMigration TruthValue, fsDot1dStpPortAdminEdgePort TruthValue, fsDot1dStpPortOperEdgePort TruthValue, fsDot1dStpPortAdminPointToPoint INTEGER, fsDot1dStpPortOperPointToPoint TruthValue, fsDot1dStpPortAdminPathCost Integer32 } fsDot1dStpPortProtocolMigration OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read." REFERENCE "IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26" ::= { fsDot1dStpExtPortEntry 1 } fsDot1dStpPortAdminEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port." REFERENCE "IEEE 802.1t clause 14.8.2, 18.3.3" ::= { fsDot1dStpExtPortEntry 2 } fsDot1dStpPortOperEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the operational value of the Edge Port parameter. The object is initialized to the value of fsDot1dStpPortAdminEdgePort and is set FALSE on reception of a BPDU." REFERENCE "IEEE 802.1t clause 14.8.2, 18.3.4" ::= { fsDot1dStpExtPortEntry 3 } fsDot1dStpPortAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue(0), forceFalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" ::= { fsDot1dStpExtPortEntry 4 } fsDot1dStpPortOperPointToPoint OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the fsDot1dStpPortAdminPointToPoint object." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" ::= { fsDot1dStpExtPortEntry 5 } fsDot1dStpPortAdminPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost or dot1dStpPortPathCost32, which returns the operational value of the path cost. The value of this object MUST be retained across reinitializations of the management system." REFERENCE "IEEE 802.1D-1998: Section 8.5.5.3" ::= { fsDot1dStpExtPortEntry 6 } -- ------------------------------------------------------------- -- fsRstpMIB - Conformance Information -- ------------------------------------------------------------- fsRstpConformance OBJECT IDENTIFIER ::= { fsRstpMIB 2 } fsRstpGroups OBJECT IDENTIFIER ::= { fsRstpConformance 1 } fsRstpCompliances OBJECT IDENTIFIER ::= { fsRstpConformance 2 } -- ------------------------------------------------------------- -- Units of conformance -- ------------------------------------------------------------- fsRstpBridgeGroup OBJECT-GROUP OBJECTS { fsDot1dStpVersion, fsDot1dStpTxHoldCount } STATUS current DESCRIPTION "Rapid Spanning Tree information for the bridge." ::= { fsRstpGroups 1 } fsRstpPortGroup OBJECT-GROUP OBJECTS { fsDot1dStpPortProtocolMigration, fsDot1dStpPortAdminEdgePort, fsDot1dStpPortOperEdgePort, fsDot1dStpPortAdminPointToPoint, fsDot1dStpPortOperPointToPoint } STATUS current DESCRIPTION "Rapid Spanning Tree information for individual ports." ::= { fsRstpGroups 2 } -- ------------------------------------------------------------- -- Compliance statements -- ------------------------------------------------------------- fsRstpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for device support of bridging services." MODULE MANDATORY-GROUPS { fsRstpBridgeGroup, fsRstpPortGroup } ::= { fsRstpCompliances 1 } END