-- Copyright (C) 2010-2012 Aricent Group . All Rights Reserved --$Id: fsmgmd.mib,v 1.12 2016/06/24 09:42:22 siva Exp $ ARICENT-MGMD-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, Counter32, Integer32, enterprises, MODULE-IDENTITY, Unsigned32, IpAddress FROM SNMPv2-SMI InetAddress, InetAddressType FROM INET-ADDRESS-MIB InterfaceIndex FROM IF-MIB RowStatus FROM SNMPv2-TC; fsmgmdMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "The MIB module for management of MGMD (Multicast Group Membership Discovery)modules IGMPv1, IGMPv2 IGMPv3, MLDv1 and MLDv2" REVISION "201209050000Z" -- August 25, 2003 DESCRIPTION "Initial Version" ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 62 } fsmgmd OBJECT IDENTIFIER ::= { fsmgmdMIB 1 } fsMgmdIgmpGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the global status of the IGMP protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables IGMP on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'." DEFVAL { disabled } ::= { fsmgmd 1 } fsMgmdIgmpTraceLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Management, 1 - Data Path, 2 - Control Plane, 3 - Rx, 4 - Tx, 5 - All Failures. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to Data Path and Control Plane will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { fsmgmd 2 } fsMgmdIgmpDebugLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows:0 - I/o, 1 - Group, 2 - Query, 3 - Timer, 4 - NP, 5 - Init Shut, 6 - OS resources, 7 - Buffer, 8 - Management,9 - Entry, 10 - Exit. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Debug statements related to Group and Query will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { fsmgmd 3 } fsMgmdMldGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables MLD on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'." DEFVAL { disabled } ::= { fsmgmd 4 } fsMgmdMldTraceLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Data Path, 1 - Control Plane, 2 - Rx, 3 - Tx, 4 - All Failures. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Data Path and Control Plane will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { fsmgmd 5 } fsMgmdMldDebugLevel OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to enable Debug Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Debug. The bits represents the levels as follows:0 - I/o, 1 - Group, 2 - Query, 3 - Timer, 4 - NP, 5 - Init Shut, 6 - OS resources, 7 - Buffer, 8 - Entry, 9 - Exit. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Debug statements related to Group and Query will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { fsmgmd 6 } -- SCALAR_TABLE_END fsmgmd -- ************************************************ -- MGMD INTERFACE TABLE -- ************************************************ fsMgmdInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMgmdInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the MGMD Statistic information for all the ports in the system." ::= { fsmgmd 7 } fsMgmdInterfaceEntry OBJECT-TYPE SYNTAX FsMgmdInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the necessary information of MGMD statistics on a logical interface." INDEX { fsMgmdInterfaceIfIndex, fsMgmdInterfaceAddrType } ::= { fsMgmdInterfaceTable 1 } FsMgmdInterfaceEntry ::= SEQUENCE { fsMgmdInterfaceIfIndex InterfaceIndex, fsMgmdInterfaceAddrType InetAddressType, fsMgmdInterfaceAdminStatus INTEGER, fsMgmdInterfaceFastLeaveStatus INTEGER, fsMgmdInterfaceOperStatus INTEGER, fsMgmdInterfaceIncomingPkts Counter32, fsMgmdInterfaceIncomingJoins Counter32, fsMgmdInterfaceIncomingLeaves Counter32, fsMgmdInterfaceIncomingQueries Counter32, fsMgmdInterfaceOutgoingQueries Counter32, fsMgmdInterfaceRxGenQueries Counter32, fsMgmdInterfaceRxGrpQueries Counter32, fsMgmdInterfaceRxGrpAndSrcQueries Counter32, fsMgmdInterfaceRxIgmpv1v2Reports Counter32, fsMgmdInterfaceRxIgmpv3Reports Counter32, fsMgmdInterfaceRxMldv1Reports Counter32, fsMgmdInterfaceRxMldv2Reports Counter32, fsMgmdInterfaceTxGenQueries Counter32, fsMgmdInterfaceTxGrpQueries Counter32, fsMgmdInterfaceTxGrpAndSrcQueries Counter32, fsMgmdInterfaceTxIgmpv1v2Reports Counter32, fsMgmdInterfaceTxIgmpv3Reports Counter32, fsMgmdInterfaceTxMldv1Reports Counter32, fsMgmdInterfaceTxMldv2Reports Counter32, fsMgmdInterfaceTxLeaves Counter32, fsMgmdInterfaceChannelTrackStatus INTEGER, fsMgmdInterfaceGroupListId Unsigned32, fsMgmdInterfaceLimit Unsigned32, fsMgmdInterfaceCurGrpCount Unsigned32, fsMgmdInterfaceCKSumError Counter32, fsMgmdInterfacePktLenError Counter32, fsMgmdInterfacePktsWithLocalIP Counter32, fsMgmdInterfaceSubnetCheckFailure Counter32, fsMgmdInterfaceQryFromNonQuerier Counter32, fsMgmdInterfaceReportVersionMisMatch Counter32, fsMgmdInterfaceQryVersionMisMatch Counter32, fsMgmdInterfaceUnknownMsgType Counter32, fsMgmdInterfaceInvalidV1Report Counter32, fsMgmdInterfaceInvalidV2Report Counter32, fsMgmdInterfaceInvalidV3Report Counter32, fsMgmdInterfaceRouterAlertCheckFailure Counter32, fsMgmdInterfaceIncomingSSMPkts Counter32, fsMgmdInterfaceInvalidSSMPkts Counter32, fsMgmdInterfaceJoinPktRate Integer32, fsMgmdInterfaceMalformedPkts Counter32, fsMgmdInterfaceSocketErrors Counter32, fsMgmdInterfaceBadScopeErrors Counter32 } fsMgmdInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which IGMP or MLD is enabled. The table is indexed by the ifIndex value and the InetAddressType to allow for interfaces that may be configured in both IPv4 and IPv6 modes." ::= { fsMgmdInterfaceEntry 1 } fsMgmdInterfaceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this interface. This entry along with the ifIndex value acts as the index to the fsMgmdInterface table. A physical interface may be configured in multiple modes concurrently, e.g., in IPv4 and IPv6 modes connected to the same interface; however, the traffic is considered to be logically separate." ::= { fsMgmdInterfaceEntry 2 } fsMgmdInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This gives the Administrative Status of the Interface." DEFVAL { up } ::= { fsMgmdInterfaceEntry 3 } fsMgmdInterfaceFastLeaveStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the fast leave feature of the IGMPV3 or MLDv2 protocol. Making this object 'enable' supports immediate intimation to the Multicast Routing Protocol on the last member leaving the Group. Making this object 'disable' will not support fast leave support. Default value of this entry will be 'disable'. This must be enabled only on those interfaces where there is single host. This can also be enabled on those interfaces having more than one hosts only if all are IGMPv3/MLDv2 hosts in IGMPV3/MLDv2 Mode. " DEFVAL { disable } ::= { fsMgmdInterfaceEntry 4 } fsMgmdInterfaceOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface." ::= { fsMgmdInterfaceEntry 5 } fsMgmdInterfaceIncomingPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP/MLD Packets received by the router" ::= { fsMgmdInterfaceEntry 6 } fsMgmdInterfaceIncomingJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming JoinGroupMessage counter." ::= { fsMgmdInterfaceEntry 7 } fsMgmdInterfaceIncomingLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming LeaveGroupMessage counter." ::= { fsMgmdInterfaceEntry 8 } fsMgmdInterfaceIncomingQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming Queries counter." ::= { fsMgmdInterfaceEntry 9 } fsMgmdInterfaceOutgoingQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Outgoing Queries counter." ::= { fsMgmdInterfaceEntry 10 } fsMgmdInterfaceRxGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of General Queries received on this interface." ::= { fsMgmdInterfaceEntry 11 } fsMgmdInterfaceRxGrpQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group specific queries received on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 12 } fsMgmdInterfaceRxGrpAndSrcQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group and source specific queries received on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 13 } fsMgmdInterfaceRxIgmpv1v2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv1 and IGMPv2 reports reports received on this interface." ::= { fsMgmdInterfaceEntry 14 } fsMgmdInterfaceRxIgmpv3Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv3 reports received on this interface." ::= { fsMgmdInterfaceEntry 15 } fsMgmdInterfaceRxMldv1Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLDv1 reports reports received on this interface." ::= { fsMgmdInterfaceEntry 16 } fsMgmdInterfaceRxMldv2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLDv2 reports received on this interface." ::= { fsMgmdInterfaceEntry 17 } fsMgmdInterfaceTxGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of General queries sent on this interface." ::= { fsMgmdInterfaceEntry 18 } fsMgmdInterfaceTxGrpQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group specific queries sent on this interface." ::= { fsMgmdInterfaceEntry 19 } fsMgmdInterfaceTxGrpAndSrcQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group and source specific queries sent on this interface." ::= { fsMgmdInterfaceEntry 20 } fsMgmdInterfaceTxIgmpv1v2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP v1/v2 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 21 } fsMgmdInterfaceTxIgmpv3Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv3 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 22 } fsMgmdInterfaceTxMldv1Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLD v1 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 23 } fsMgmdInterfaceTxMldv2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of MLDv2 reports sent on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 24 } fsMgmdInterfaceTxLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv2 leaves or MLDv1 leaves sent on this interface. This object is specific to MGMD Proxy implementation." ::= { fsMgmdInterfaceEntry 25 } fsMgmdInterfaceChannelTrackStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the explicit channel tracking feature of the IGPMV3 protocol. Configuring this object as 'enable' makes the router to keep track of each individual host that is joined to a particular multicast group or channel. Making this object 'disable' will not support explicit channel tracking feature support. Default value of this entry will be 'disable'. This must be enabled only on IGMPv3 interfaces." DEFVAL { disable } ::= { fsMgmdInterfaceEntry 26 } fsMgmdInterfaceGroupListId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicate multicast GroupList Id mapped to this interface.This grouplist will be exempted for limiting on this interface. Grouplist support is provided for IGMPv1, IGMPv2 IGMPv3 only." ::= { fsMgmdInterfaceEntry 27 } fsMgmdInterfaceLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the total number of multicast groups can be allowed for this interface.If fsMgmdInterfaceCurGrpCount reaches this InterfaceLimit then no membership reports will be honored on this interface except the grouplist mapped to this interface.This feature supports for IGMPv1, IGMPv2 IGMPv3 only." ::= { fsMgmdInterfaceEntry 28 } fsMgmdInterfaceCurGrpCount OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current count of multicast groups that were added to the interface.This counter will be incremented for each valid membership report on this interface and decremented for leave report." ::= { fsMgmdInterfaceEntry 29 } fsMgmdInterfaceCKSumError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received with checksum error on an interface." ::= { fsMgmdInterfaceEntry 30 } fsMgmdInterfacePktLenError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received with packet length error on an interface." ::= { fsMgmdInterfaceEntry 31 } fsMgmdInterfacePktsWithLocalIP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received on an interface with local IP address as source address." ::= { fsMgmdInterfaceEntry 32 } fsMgmdInterfaceSubnetCheckFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets dropped due to subnet check failure." ::= { fsMgmdInterfaceEntry 33 } fsMgmdInterfaceQryFromNonQuerier OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of queries received from a non-querier on an interface." ::= { fsMgmdInterfaceEntry 34 } fsMgmdInterfaceReportVersionMisMatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of reports received by with version mismatch on an interface." ::= { fsMgmdInterfaceEntry 35 } fsMgmdInterfaceQryVersionMisMatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of queries received with version mismatch on an interface." ::= { fsMgmdInterfaceEntry 36 } fsMgmdInterfaceUnknownMsgType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets received with unknown message type on an interface." ::= { fsMgmdInterfaceEntry 37 } fsMgmdInterfaceInvalidV1Report OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid V2 reports received on an interface." ::= { fsMgmdInterfaceEntry 38 } fsMgmdInterfaceInvalidV2Report OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid V2 reports received on an interface." ::= { fsMgmdInterfaceEntry 39 } fsMgmdInterfaceInvalidV3Report OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid V3 reports received on an interface." ::= { fsMgmdInterfaceEntry 40 } fsMgmdInterfaceRouterAlertCheckFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of packets dropped due to router alert check failure." ::= { fsMgmdInterfaceEntry 41 } fsMgmdInterfaceIncomingSSMPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of V3 reports received on an interface for SSM group range." ::= { fsMgmdInterfaceEntry 42 } fsMgmdInterfaceInvalidSSMPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of invalid SSM v3 reports received on an interface." ::= { fsMgmdInterfaceEntry 43 } fsMgmdInterfaceJoinPktRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the rate at which the join packets can be received on an interface." DEFVAL { 0 } ::= { fsMgmdInterfaceEntry 44 } fsMgmdInterfaceMalformedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of Malformed packets received. Packet is just not as expected in the protocol specifications." ::= { fsMgmdInterfaceEntry 45 } fsMgmdInterfaceSocketErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of socket errors." ::= { fsMgmdInterfaceEntry 46 } fsMgmdInterfaceBadScopeErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the number of MLD packets received on the link scope IPv6 multicast address. " ::= { fsMgmdInterfaceEntry 47 } -- ************************************************ -- MGMD CACHE TABLE -- ************************************************ fsMgmdCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMgmdCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IGMP/MLD group statistic information" ::= { fsmgmd 26 } fsMgmdCacheEntry OBJECT-TYPE SYNTAX FsMgmdCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the necessary Statistics of Multicast Groups" INDEX { fsMgmdCacheAddrType, fsMgmdCacheAddress, fsMgmdCacheIfIndex } ::= { fsMgmdCacheTable 1 } FsMgmdCacheEntry ::= SEQUENCE { fsMgmdCacheAddrType InetAddressType, fsMgmdCacheAddress InetAddress, fsMgmdCacheIfIndex InterfaceIndex, fsMgmdCacheGroupCompMode Integer32 } fsMgmdCacheAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this interface. It can be IPv4 or IPv6. This entry along with the ifIndex and CacheAddress acts as the index to the fsMgmdCache table. A physical interface may be configured in multiple modes concurrently, e.g., in IPv4 and IPv6 modes connected to the same interface; however, the traffic is considered to be logically separate." ::= { fsMgmdCacheEntry 1 } fsMgmdCacheAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { fsMgmdCacheEntry 2 } fsMgmdCacheIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface for which this entry contains information for an IP multicast group address." ::= { fsMgmdCacheEntry 3 } fsMgmdCacheGroupCompMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Group Compatibility Mode of the particular Group." ::= { fsMgmdCacheEntry 4 } fsMgmdScalarGroup OBJECT IDENTIFIER ::= {fsmgmd 8} fsMgmdGlobalLimit OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the total number of multicast groups can be allowed.This support is for IGMPv1, IGMPv2 IGMPv3 only" ::= { fsMgmdScalarGroup 1 } fsMgmdGlobalCurGrpCount OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current count of groups that were added. If this reaches to fsMgmdGlobalLimit no membership reports will be honored for any interface." ::= { fsMgmdScalarGroup 2 } fsMgmdSSMMapStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the global status of the SSM Mapping functionality in the router. When the SSM map status is enabled, if SSM mapping is configured for a set of groups, then on receving ( * G) join from the IGMP hosts, the router translates the (* G) into (S G) entry with the configured source address. Making this object 'disabled' will remove all dynamic multicast entries learnt via SSM mapped group and source addresses. Default value of this variable will be 'disabled'." DEFVAL { disabled } ::= { fsMgmdScalarGroup 3 } -- ************************************************ -- IGMP SSM MAP GROUP TABLE -- ************************************************ fsMgmdSSMMapGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMgmdSSMMapGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IGMP SSM Mapped group and source information. Multiple range of groups will be mapped to a single source address." ::= { fsmgmd 9 } fsMgmdSSMMapGroupEntry OBJECT-TYPE SYNTAX FsMgmdSSMMapGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about the range of group address mapped to source address." INDEX { fsMgmdSSMMapStartGrpAddress,fsMgmdSSMMapEndGrpAddress,fsMgmdSSMMapSourceAddress } ::= { fsMgmdSSMMapGroupTable 1 } FsMgmdSSMMapGroupEntry ::= SEQUENCE { fsMgmdSSMMapStartGrpAddress IpAddress, fsMgmdSSMMapEndGrpAddress IpAddress, fsMgmdSSMMapSourceAddress IpAddress, fsMgmdSSMMapRowStatus RowStatus } fsMgmdSSMMapStartGrpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates the Start Group IP address for which SSM mapping has to be applied." ::= { fsMgmdSSMMapGroupEntry 1 } fsMgmdSSMMapEndGrpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates the End Group IP address upto which SSM mapping has to be applied." ::= { fsMgmdSSMMapGroupEntry 2 } fsMgmdSSMMapSourceAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates the Source IP address that has to be mapped to the given group IP address range." ::= { fsMgmdSSMMapGroupEntry 3 } fsMgmdSSMMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus of SSM Mapped Multicast Group record" ::= { fsMgmdSSMMapGroupEntry 4 } END