-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved -- $Id: fsissmet.mib,v 1.8 2012/09/07 09:52:14 siva Exp $ ARICENT-ISS-MET-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI enterprises FROM SNMPv2-SMI issL2FilterEntry, issL3FilterEntry FROM ARICENT-ISS-MIB; issMet MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "Proprietary MIB definition for Metro Feature" REVISION "201209050000Z" DESCRIPTION "Proprietary MIB definition for Metro Feature" ::= { enterprises futuresoftware (2076) iss (81) issExt (8) 4} -- ----------------------------------------------------------------- -- -- groups in the MIB -- ----------------------------------------------------------------- -- issMetroL2Filter OBJECT IDENTIFIER ::= { issMet 1 } issMetroL3Filter OBJECT IDENTIFIER ::= { issMet 2 } -- ------------------------------------------------------------------ -- L2 Filter Group -------------------------------------------------- issMetroL2FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF IssMetroL2FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure L2 filter rules defined for the metro ethernet features of the switch." ::= { issMetroL2Filter 1 } issMetroL2FilterEntry OBJECT-TYPE SYNTAX IssMetroL2FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. An entry in this table will be created when the L2 Filter entry (issL2FilterStatus) in the fsissext.mib is created." AUGMENTS { issL2FilterEntry} ::= { issMetroL2FilterTable 1 } IssMetroL2FilterEntry ::= SEQUENCE { issMetroL2FilterOuterEtherType Integer32, issMetroL2FilterSVlanId Integer32, issMetroL2FilterSVlanPriority Integer32, issMetroL2FilterCVlanPriority Integer32, issMetroL2FilterPacketTagType INTEGER } issMetroL2FilterOuterEtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies the Ether type of the Outer VLAN tag of a packet. By Default, the value of the Outer Ether type will be zero, which means dont care condition ie) Packet with any ether type." DEFVAL { 0 } ::= { issMetroL2FilterEntry 1 } issMetroL2FilterSVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Service Vlan Id / Outer Vlan Id / Vlan Id present in Outer tag to be filtered. A value of '0' means, the service Vlan Id becomes dont care" DEFVAL { 0 } ::= { issMetroL2FilterEntry 2 } issMetroL2FilterSVlanPriority OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Service Vlan Priority / Outer Vlan Priority / Vlan Priority present in Outer tag to be filtered. A value of '-1' means, the Service Vlan priority becomes dont care" DEFVAL { -1 } ::= { issMetroL2FilterEntry 3 } issMetroL2FilterCVlanPriority OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Customer Vlan Priority / Inner Vlan Priority / Vlan Priority present in Inner tag to be filtered. A value of '-1' means, the Customer Vlan priority becomes dont care" DEFVAL { -1 } ::= { issMetroL2FilterEntry 4 } issMetroL2FilterPacketTagType OBJECT-TYPE SYNTAX INTEGER { singleTag (1), doubleTag (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the configured filter parameters are applied on single VLAN tagged packets or double VLAN tagged packets. The default value for this field is 'singleTag' when any of issMetroL2FilterSVlanId, issMetroL2FilterSVlanPriority, issMetroL2FilterOuterEtherType are configured other than the default value. When any of these parameters is configured, the value of this field can be only 'doubleTag' and cannot be modified. However, this field can be configured as 'doubleTag' when none of these parameters are specified and only customer vlan id is configured" DEFVAL { singleTag } ::= { issMetroL2FilterEntry 5 } -- ------------------------------------------------------------------ -- L3 Filter Group -------------------------------------------------- issMetroL3FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF IssMetroL3FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table to configure L3 filter rules defined for the metro ethernet features of the switch." ::= { issMetroL3Filter 1 } issMetroL3FilterEntry OBJECT-TYPE SYNTAX IssMetroL3FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each entry in this table is a L3 filter rule. Index to the table is L3 filter number. An entry in this table is created when issL3FilterStatus is created in fsissext.mib" AUGMENTS { issL3FilterEntry} ::= { issMetroL3FilterTable 1 } IssMetroL3FilterEntry ::= SEQUENCE { issMetroL3FilterSVlanId Integer32, issMetroL3FilterSVlanPriority Integer32, issMetroL3FilterCVlanId Integer32, issMetroL3FilterCVlanPriority Integer32, issMetroL3FilterPacketTagType INTEGER } issMetroL3FilterSVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Service Vlan Id / Outer Vlan Id / Vlan Id present in Outer tag to be filtered. A value of '0' means, the Service Vlan Id becomes dont care" DEFVAL { 0 } ::= { issMetroL3FilterEntry 1 } issMetroL3FilterSVlanPriority OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Service Vlan Priority / Outer Vlan Priority / Vlan Priority present in Outer tag to be filtered. A value of '-1' means, the service vlan priority becomes dont care" DEFVAL { -1 } ::= { issMetroL3FilterEntry 2 } issMetroL3FilterCVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Customer Vlan Id / Inner Vlan Id / Vlan Id present in Inner tag to be filtered. A value of '0' means, the Customer Vlan Id becomes dont care" DEFVAL { 0 } ::= { issMetroL3FilterEntry 3 } issMetroL3FilterCVlanPriority OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Customer Vlan Priority / Inner Vlan Priority / Vlan Priority present in Inner tag to be filtered. A value of '-1' means, the customer vlan priority becomes dont care" DEFVAL { -1 } ::= { issMetroL3FilterEntry 4 } issMetroL3FilterPacketTagType OBJECT-TYPE SYNTAX INTEGER { singleTag (1), doubleTag (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the configured filter parameters are applied on single VLAN tagged packets or double VLAN tagged packets. The default value for this field is 'singleTag' when any of issMetroL3FilterSVlanId, issMetroL3FilterSVlanPriority or issMetroL3FilterCVlanPriority are not configured. When any of these parameters is configured, the value of this field can be only 'doubleTag' and cannot be modified. However, this field can be configured as 'doubleTag' when none of these parameters are specified and only customer vlan id is configured" DEFVAL { singleTag } ::= { issMetroL3FilterEntry 5 } END