-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved -- $Id: fsicch.mib,v 1.9 2016/03/04 11:10:34 siva Exp $ -- ICCH Proprietary MIB Definition -- This MIB explains the propreitery information implemented -- for ICCH product. ARICENT-ICCH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, enterprises, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus, DisplayString FROM SNMPv2-TC ZeroBasedCounter32 FROM RMON2-MIB VlanId FROM Q-BRIDGE-MIB; fsIcchMIB MODULE-IDENTITY LAST-UPDATED "201412110000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "The proprietary MIB module for ICCH. This MIB supports Inter-Chassis Communication Handling." REVISION "201412110000Z" DESCRIPTION "The proprietary MIB module for ICCH. This MIB supports Inter-Chassis Communication Handling. " ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 94 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- FsIcchState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The State of the node." SYNTAX INTEGER { init(0), -- Node state is INIT master(1), -- Node state is MASTER slave(2) -- Node state is SLAVE } -- Groups fsIcch OBJECT IDENTIFIER ::= { fsIcchMIB 1 } fsIcchStatistics OBJECT IDENTIFIER ::= { fsIcchMIB 2 } fsIcchNotification OBJECT IDENTIFIER ::= { fsIcchMIB 3 } fsIcchTrap OBJECT IDENTIFIER ::= { fsIcchNotification 0 } fsIcclSession OBJECT IDENTIFIER ::= { fsIcchMIB 4 } -- Scalar objects fsIcchTrcLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the level of trace required for ICCH. The levels are defined as follows: 0x00000001 -- Management Trace. 0x00000002 -- Packet dump Trace. 0x00000004 -- All failure Trace. 0x00000008 -- Critical Trace. 0x00000010 -- Sync events trace 0x00000020 -- Sync message trace 0x00000040 -- Notification trace 0x0000007D -- All Trace." DEFVAL { '00000000'H } ::= {fsIcch 1} fsIcchStatsEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable the statistics collection of the Inter-Chassis Communication handler module. By default, statistics collection is enabled on ICCH." DEFVAL {enabled} ::= {fsIcch 2} fsIcchClearStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear the statistics collection of the Inter Chassis Communication handler module. This object has no effect when it is set to false. By default, the statistics value is false. When it is set to true, the statistics are cleared and the value is set back to false. This object always returns false when read." DEFVAL {false} ::= {fsIcch 3} fsIcchEnableProtoSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies synchronization messages that need to be enabled in ICCL. By default, all synchronization messages are blocked on ICCL." DEFVAL { '00000000'H } ::= {fsIcch 4} fsIcchFetchRemoteFdb OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to fetch remote FDB entries when MC-LAG is enabled and FDB sync-up is enabled in the system. This object can be used after the complete MAC table is cleared in the local MC-LAG nodes.This object will be reset once the complete remote FDB database is Retrieved." DEFVAL { false } ::= {fsIcch 5} fsIcchPeerNodeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to specify the IP Address of Peer Node used for ICCL TCP /IP communication . This IP address corresponds to the Layer 3 interface that will be created over the remote node ICCL interface." ::= {fsIcch 6} fsIcchPeerNodeState OBJECT-TYPE SYNTAX FsIcchState MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the state of the peer Node.The state of the node is decided after election by heart beat module. Election is based on the fsIcchPeerNodeIpAddress and fsIcclSessionIpAddress." ::= {fsIcch 7} -- ******************************************************************* -- ICCH session Table -- ******************************************************************* fsIcclSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF FsIcclSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to access the stored ICCL information" ::= { fsIcclSession 1 } fsIcclSessionEntry OBJECT-TYPE SYNTAX FsIcclSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the ICCL information entry of a session" INDEX { fsIcclSessionInstanceId } ::= { fsIcclSessionTable 1 } FsIcclSessionEntry ::= SEQUENCE { fsIcclSessionInstanceId Unsigned32, fsIcclSessionInterface DisplayString, fsIcclSessionIpAddress IpAddress, fsIcclSessionSubnetMask IpAddress, fsIcclSessionVlan VlanId, fsIcclSessionNodeState FsIcchState, fsIcclSessionRowStatus RowStatus } fsIcclSessionInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an unique value, that identifies ICCL instance." ::= {fsIcclSessionEntry 1} fsIcclSessionInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the port to be used for ICCH TCP/IP Communication . This value is read from iccl.conf file. ICCH interface is a manually aggregated, high bandwidth link to co-ordinate the control information and data exchange of Multi-chassis LAG. Inter-Chassis Communication Handler Interface is a trunk port. MAC learning will be disabled on this port. However, MAC addresses learnt on the remote MC-LAG node can be installed in the local node, with ICCL interface as the destination port. Spanning tree will be disabled always on ICCL interface to make sure the ICCL is always in forwarding state. When this object is configured, the iccl.conf file is updated automatically and the value will take effect in ISS on next reboot. This ICCL inerface should be a port-channel interface" DEFVAL {"po4094"} ::= {fsIcclSessionEntry 2} fsIcclSessionIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the IP Address to be used for ICCH TCP /IP communication . This IP address corresponds to the Layer 3 interface that will be created over the fsIcchInterface. This value is read from iccl.conf file.If it is not available, A link local IP Address 169.254.1.1 is used as the Default IP Address. Configuring this object will result in an update to iccl.conf. The configured value will take effect in ISS on next reboot." DEFVAL {'A9FE0101'h} ::= {fsIcclSessionEntry 3} fsIcclSessionSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the Subnet Mask to be associated withIP Address to be used for ICCH TCP /IP communication. Configuring this object will result in an update to iccl.conf file. The configured value will take effect in ISS on next reboot." DEFVAL {'FF000000'h} ::= {fsIcclSessionEntry 4} fsIcclSessionVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLAN ID to be used for ICCH TCP /IP communication. Configuring this object will result in an update to iccl.conf file. The configured value will take effect in ISS on next reboot." DEFVAL {4094} ::= {fsIcclSessionEntry 5} fsIcclSessionNodeState OBJECT-TYPE SYNTAX FsIcchState MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the state of the node. The state of the node is decided after election by heart beat module. Election is based on the fsIcchIpAddress." ::= {fsIcclSessionEntry 6} fsIcclSessionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the row status of ICCH session table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. The value 'CreateAndGo' adds the entry to iccl.conf and 'destroy' deletes the entry from iccl.conf." ::= { fsIcclSessionEntry 7 } -- ******************************************************************* -- END of ICCH session Table -- ******************************************************************* -- ******************************************************************* -- Statistics Counters -- ******************************************************************* -- -- TX Statistics -- fsIcchStatsSyncMsgTxCount OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of synchronization messages successfully sent from this node." ::= {fsIcchStatistics 1} fsIcchStatsSyncMsgTxFailedCount OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of sync-up messages failed while sending." ::= {fsIcchStatistics 2} -- -- RX Statistics -- fsIcchStatsSyncMsgRxCount OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of sync-up messages received at this node." ::= {fsIcchStatistics 3} fsIcchStatsSyncMsgProcCount OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of sync-up messages received and processed at this node." ::= {fsIcchStatistics 4} fsIcchStatsSyncMsgMissedCount OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ICCH module receives and processes the synchronization messages with the help of the sequence number in the message. In some failure cases, when the message with a particular sequence number is lost, this counter is incremented." ::= {fsIcchStatistics 5} -- ******************************************************************* -- Trap Definitions -- ******************************************************************* fsIcchTrapNodeStatusChange NOTIFICATION-TYPE OBJECTS { fsIcclSessionNodeState, fsIcclSessionInstanceId, fsIcclSessionInterface, fsIcclSessionIpAddress, fsIcclSessionSubnetMask, fsIcclSessionVlan } STATUS current DESCRIPTION "This object indicates that there is a significant status change in the Inter-chassis communication handler state. This trap should be generated when the node status changes" ::= { fsIcchTrap 1 } fsIcchTrapPeerNodeStatusChange NOTIFICATION-TYPE OBJECTS { fsIcchPeerNodeIpAddress, fsIcchPeerNodeState } STATUS current DESCRIPTION "This object indicates that there is a significant status change in the Peer node.This trap should be generated when peer node status changes" ::= { fsIcchTrap 2 } END