--****************************************************************************** --Copyright (C) 2012 Aricent Inc . All Rights Reserved -- --$Id: fs11ac.mib,v 1.5 2016/05/23 12:40:14 siva Exp $ -- --Description : This file contains MIB definitions for ISS module. -- --******************************************************************************/ -- AricentISS MIB Definition -- MIB for 'Wireless Switch Solution' -- The 'Wireless Switch Solution' MIB definition is as follows: ARICENT-DOT11AC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Unsigned32, Integer32 FROM SNMPv2-SMI ifIndex FROM IF-MIB TruthValue FROM SNMPv2-TC; fs11AC MODULE-IDENTITY LAST-UPDATED "201503050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "ARICENT COMMUNICATIONS SOFTWARE 3460 Hillview Avenue, Palo Alto, CA 94304-1388, USA, Phone : +1-650-391-1088 E-mail:support@aricent.com" DESCRIPTION "The enterprise ID 29601 is assigned to Aricent Communication Holdings Limitied." REVISION "201503050000Z" DESCRIPTION "The MIB for 802.11AC in WSS module." ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 100 } -- ----------------------------------------------------------------- -- -- groups in the MIB -- ----------------------------------------------------------------- -- fsDot11ACConfig OBJECT IDENTIFIER ::= { fs11AC 1 } fsDot11VHTStationConfig OBJECT IDENTIFIER ::= { fs11AC 2 } fsDot11PhyVHT OBJECT IDENTIFIER ::= { fs11AC 3 } -- *********************** 11ac Configuration *************************** -- ********************11ac Congiguration Table ************************* fsDot11ACConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11ACConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Station Configuration attributes in tabular form to allow for multiple instances on an agent." ::= { fsDot11ACConfig 1 } fsDot11ACConfigEntry OBJECT-TYPE SYNTAX FsDot11ACConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry (conceptual row) in the dot11HTStationConfig Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { fsDot11ACConfigTable 1 } FsDot11ACConfigEntry ::= SEQUENCE { fsDot11ACMaxMPDULength INTEGER, fsDot11ACMaxMPDULengthConfig INTEGER, fsDot11ACVHTMaxRxAMPDUFactor Unsigned32, fsDot11ACVHTMaxRxAMPDUFactorConfig Unsigned32, fsDot11ACVHTControlFieldSupported TruthValue, fsDot11ACVHTTXOPPowerSaveOptionImplemented TruthValue, fsDot11ACVHTRxMCSMap OCTET STRING, fsDot11ACVHTRxHighestDataRateSupported Unsigned32, fsDot11ACVHTTxMCSMap OCTET STRING, fsDot11ACVHTTxHighestDataRateSupported Unsigned32, fsDot11ACVHTOBSSScanCount Unsigned32, fsDot11ACCurrentChannelBandwidth INTEGER, fsDot11ACCurrentChannelBandwidthConfig INTEGER, fsDot11ACCurrentChannelCenterFrequencyIndex0 Unsigned32, fsDot11ACCurrentChannelCenterFrequencyIndex0Config Unsigned32, fsDot11ACCurrentChannelCenterFrequencyIndex1 Unsigned32, fsDot11ACVHTShortGIOptionIn80Implemented TruthValue, fsDot11ACVHTShortGIOptionIn80Activated TruthValue, fsDot11ACVHTShortGIOptionIn160and80p80Implemented TruthValue, fsDot11ACVHTShortGIOptionIn160and80p80Activated TruthValue, fsDot11ACVHTLDPCCodingOptionImplemented TruthValue, fsDot11ACVHTLDPCCodingOptionActivated TruthValue, fsDot11ACVHTTxSTBCOptionImplemented TruthValue, fsDot11ACVHTTxSTBCOptionActivated TruthValue, fsDot11ACVHTRxSTBCOptionImplemented TruthValue, fsDot11ACVHTRxSTBCOptionActivated TruthValue, fsDot11ACVHTMUMaxUsersImplemented Unsigned32, fsDot11ACVHTMUMaxNSTSPerUserImplemented Unsigned32, fsDot11ACVHTMUMaxNSTSTotalImplemented Unsigned32, fsDot11ACSuBeamFormer INTEGER, fsDot11ACSuBeamFormee INTEGER, fsDot11ACMuBeamFormer INTEGER, fsDot11ACMuBeamFormee INTEGER, fsDot11ACVHTLinkAdaption INTEGER, fsDot11ACRxAntennaPattern INTEGER, fsDot11ACTxAntennaPattern INTEGER, fsDot11ACBasicMCSMap OCTET STRING, fsDot11ACVHTRxMCSMapConfig OCTET STRING, fsDot11ACVHTTxMCSMapConfig OCTET STRING, fsDot11ACCurrentChannelCenterFrequencyIndex1Config Unsigned32, fsDot11VHTOptionImplemented TruthValue, fsDot11OperatingModeNotificationImplemented TruthValue, fsDot11ExtendedChannelSwitchActivated TruthValue, fsDot11FragmentationThreshold Unsigned32 } fsDot11ACMaxMPDULength OBJECT-TYPE SYNTAX INTEGER { short(3895), medium(7991), long(11454) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the supported maximum MPDU size, and is determined by device capabilities." DEFVAL { short } ::= { fsDot11ACConfigEntry 1 } fsDot11ACMaxMPDULengthConfig OBJECT-TYPE SYNTAX INTEGER { short(3895), medium(7991), long(11454) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the supported maximum MPDU size and its maximum value can only be less than or equal to device capability(fsDot11ACMaxMPDULength)." DEFVAL { short } ::= { fsDot11ACConfigEntry 2 } fsDot11ACVHTMaxRxAMPDUFactor OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum length of A-MPDU that the STA can receive. The Maximum Rx A-MPDU defined by this field is equal to 2^(13+fsDot11ACVHTMaxRxAMPDUFactor) -1 octets." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 3 } fsDot11ACVHTMaxRxAMPDUFactorConfig OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum length of A-MPDU that the STA can receive. The Maximum Rx A-MPDU defined by this field is equal to 2^(13+fsDot11ACVHTMaxRxAMPDUFactorConfig) -1 octets and its value can only be less than or equal to the device capability (fsDot11ACVHTMaxRxAMPDUFactor)" DEFVAL { 0 } ::= { fsDot11ACConfigEntry 4 } fsDot11ACVHTControlFieldSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the station implementation is capable of receiving the VHT variant HT Control field." DEFVAL { false } ::= { fsDot11ACConfigEntry 5 } fsDot11ACVHTTXOPPowerSaveOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the station implementation is capable of TXOP Power Save operation." DEFVAL { false } ::= { fsDot11ACConfigEntry 6 } fsDot11ACVHTRxMCSMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the highest MCS supported (for Rx) on the number of streams represented by the octet position (first octet represents 1 stream, second octet represents 2 streams, etc.). A value 0 indicates that MCSs 0-7 are supported. A value 1 indicates that MCSs 0-8 are supported. A value 2 indicates that MCSs 0-9 are supported. A value 3 indicates no support for that number of spatial streams." ::= { fsDot11ACConfigEntry 7 } fsDot11ACVHTRxHighestDataRateSupported OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the highest data rate in Mb/s that the STA is capable of receiving." ::= { fsDot11ACConfigEntry 8 } fsDot11ACVHTTxMCSMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the highest MCS supported (for Tx) on the number of streams represented by the octet position (first octet represents 1 stream, second octet represents 2 streams, etc.). A value 0 indicates that MCSs 0-7 are supported. A value 1 indicates that MCSs 0-8 are supported. A value 2 indicates that MCSs 0-9 are supported. A value 3 indicates no support for that number of spatial streams." ::= { fsDot11ACConfigEntry 9 } fsDot11ACVHTTxHighestDataRateSupported OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the highest data rate in Mb/s that the STA is capable of transmitting." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 10 } fsDot11ACVHTOBSSScanCount OBJECT-TYPE SYNTAX Unsigned32 (3..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the minimum number of scan operations performed on a channel to detect another OBSS." DEFVAL { 3 } ::= { fsDot11ACConfigEntry 11 } fsDot11ACCurrentChannelBandwidth OBJECT-TYPE SYNTAX INTEGER { cbw20(0), cbw40(1), cbw80(2), cbw160(3), cbw80p80(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the operating channel width." DEFVAL { cbw20 } ::= { fsDot11ACConfigEntry 12 } fsDot11ACCurrentChannelBandwidthConfig OBJECT-TYPE SYNTAX INTEGER { cbw20(0), cbw40(1), cbw80(2), cbw160(3), cbw80p80(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the operating channel width and its value that can be less than or equal to the status variable (fsDot11ACCurrentChannelBandwidth)" DEFVAL { cbw20 } ::= { fsDot11ACConfigEntry 13 } fsDot11ACCurrentChannelCenterFrequencyIndex0 OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the channel center frequency such as 20 MHz, 40 MHz, 80 MHz or 160 MHz channel(Ed) where an 80+80 MHz channel(Ed), denotes the center frequency of frequency segment 0." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 14 } fsDot11ACCurrentChannelCenterFrequencyIndex0Config OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the channel center frequency such as 20 MHz, 40 MHz, 80 MHz or 160 MHz channel(Ed), where an 80+80 MHz channel(Ed), denotes the center frequency of frequency segment 0. The value of the frequency cannot exceed the status variable's value (fsDot11ACCurrentChannelCenterFrequencyIndex0)." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 15 } fsDot11ACCurrentChannelCenterFrequencyIndex1 OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the channel center frequency such as 20 MHz, 40 MHz, 80 MHz or 160 MHz channel(Ed), where an 80+80 MHz channel(Ed), denotes the center frequency of frequency segment 1." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 16 } fsDot11ACVHTShortGIOptionIn80Implemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the device is capable of receiving 80 MHz short guard interval packets." DEFVAL { false } ::= { fsDot11ACConfigEntry 17 } fsDot11ACVHTShortGIOptionIn80Activated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the reception of 80 MHz short guard interval packets is enabled. Changes made while associated with an AP or while operating a BSS should take effect only after disassociation or the deactivation of the BSS, respectively." DEFVAL { false } ::= { fsDot11ACConfigEntry 18 } fsDot11ACVHTShortGIOptionIn160and80p80Implemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the device is capable of receiving 160 MHz and 80+80 MHz short guard interval packets." DEFVAL { false } ::= { fsDot11ACConfigEntry 19 } fsDot11ACVHTShortGIOptionIn160and80p80Activated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the reception of 160 MHz and 80+80 MHz short guard interval packets is enabled. Changes take effect as soon as practical in the implementation. Changes made while associated with an AP or while operating a BSS should take effect only after disassociation or the deactivation of the BSS, respectively." DEFVAL { false } ::= { fsDot11ACConfigEntry 20 } fsDot11ACVHTLDPCCodingOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the LDPC coding option for VHT packets is implemented." DEFVAL { false } ::= { fsDot11ACConfigEntry 21 } fsDot11ACVHTLDPCCodingOptionActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the LDPC coding option for VHT packets is enabled. Changes take effect as soon as practical in the implementation. Changes made while associated with an AP or while operating a BSS should take effect only after disassociation or the deactivation of the BSS, respectively." DEFVAL { false } ::= { fsDot11ACConfigEntry 22 } fsDot11ACVHTTxSTBCOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the device is capable of transmitting VHT PPDUs using STBC." DEFVAL { false } ::= { fsDot11ACConfigEntry 23 } fsDot11ACVHTTxSTBCOptionActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the entity's capability for transmitting VHT PPDUs using STBC is enabled. Changes take effect as soon as practical in the implementation. Changes made while associated with an AP or while operating a BSS should take effect only after disassociation or the deactivation of the BSS, respectively." DEFVAL { false } ::= { fsDot11ACConfigEntry 24 } fsDot11ACVHTRxSTBCOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the device is capable of receiving VHT PPDUs using STBC." DEFVAL { false } ::= { fsDot11ACConfigEntry 25 } fsDot11ACVHTRxSTBCOptionActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the entity's capability for receiving VHT PPDUs using STBC is enabled. Changes take effect as soon as practical in the implementation. Changes made while associated with an AP or while operating a BSS should take effect only after disassociation or the deactivation of the BSS, respectively." DEFVAL { false } ::= { fsDot11ACConfigEntry 26 } fsDot11ACVHTMUMaxUsersImplemented OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum number of users to which the device is capable of transmitting within a MU PPDU." DEFVAL { 1 } ::= { fsDot11ACConfigEntry 27 } fsDot11ACVHTMUMaxNSTSPerUserImplemented OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum number of space-time streams per user that the device is capable of transmitting within a MU PPDU." DEFVAL { 1 } ::= { fsDot11ACConfigEntry 28 } fsDot11ACVHTMUMaxNSTSTotalImplemented OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum number of space-time streams for all users that the device is capable of transmitting within a MU DU." DEFVAL { 1 } ::= { fsDot11ACConfigEntry 29 } fsDot11ACSuBeamFormer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the support for operation as an SU beamformer where the value is set to 0 if not supported or is set to 1 if supported." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 30 } fsDot11ACSuBeamFormee OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the support for operation as an SU beamformee where the value is set to 0 if not supported or is set to 1 if supported." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 31 } fsDot11ACMuBeamFormer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the support for operation as an MU beamformer where the value is set to 0 if not supported or if SU Beamformer Capable or if sent by a non-AP STA or is set to 1 if supported and SU Beamformer Capable." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 32 } fsDot11ACMuBeamFormee OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the support for operation as an MU beamformee where the value is set to 0 if not supported or if SU Beamformee Capable or if sent by an AP or is set to 1 if supported and SU Beamformee Capable." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 33 } fsDot11ACVHTLinkAdaption OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not the STA supports link adaptation using VHT variant HT Control field. If +HTC-VHT Capable is 1: Set to 0 (No Feedback) if the STA does not provide VHT MFB. Set to 2 (Unsolicited) if the STA provides only unsolicited VHT MFB. Set to 3 (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the STA provides unsolicited VHT MFB. The value 1 is reserved. it is reserved even when +HTC-VHT Capable is 0." DEFVAL { 1 } ::= { fsDot11ACConfigEntry 34 } fsDot11ACRxAntennaPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the possibility of Rx antenna pattern change where the value is set to 0 if Rx antenna pattern might change during the lifetime of the current association. or is set to 1 if Rx antenna pattern does not change during the lifetime of the current association." DEFVAL { 1 } ::= { fsDot11ACConfigEntry 35 } fsDot11ACTxAntennaPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the possibility of Tx antenna pattern change where the value is set to 0 if Rx antenna pattern might change during the lifetime of the current association. or is set to 1 if Tx antenna pattern does not change during the lifetime of the current association." DEFVAL { 1 } ::= { fsDot11ACConfigEntry 36 } fsDot11ACBasicMCSMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the MCSs for each number of spatial streams in VHT PPDUs that are supported by all VHT STAs in the BSS (including IBSS and MBSS). It is a bitmap of size 16 bits; each 2 bits indicates the supported MCS set for NSS from 1 to 8." ::= { fsDot11ACConfigEntry 37 } fsDot11ACVHTRxMCSMapConfig OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Rx MCS Map that is to be configured to the access point from the controller. Its value depends on the capability variable(fsDot11ACVHTRxMCSMap). Each octet represents the highest MCS supported (for Rx) on the number of streams represented by the octet position (first octet represents 1 stream, second octet represents 2 streams, etc.). A value 0 indicates that MCSs 0-7 are supported. A value 1 indicates that MCSs 0-8 are supported. A value 2 indicates that MCSs 0-9 are supported. A value 3 indicates no support for that number of spatial streams." ::= { fsDot11ACConfigEntry 38 } fsDot11ACVHTTxMCSMapConfig OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Tx MCS Map that is to be configured to the access point from the controller. Its value depends on the capability variable(fsDot11ACVHTTxMCSMap). Each octet represents the highest MCS supported (for Rx) on the number of streams represented by the octet position (first octet represents 1 stream, second octet represents 2 streams, etc.). A value 0 indicates that MCSs 0-7 are supported. A value 1 indicates that MCSs 0-8 are supported. A value 2 indicates that MCSs 0-9 are supported. A value 3 indicates no support for that number of spatial streams." ::= { fsDot11ACConfigEntry 39 } fsDot11ACCurrentChannelCenterFrequencyIndex1Config OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the channel center frequency such as 20 MHz, 40 MHz, 80 MHz or 160 MHz channel(Ed), where an 80+80 MHz channel(Ed), denotes the center frequency of frequency segment 1. The value of this cannot exceed the status variable's value (fsDot11ACCurrentChannelCenterFrequencyIndex1)." DEFVAL { 0 } ::= { fsDot11ACConfigEntry 40 } fsDot11VHTOptionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the entity is VHT capable." ::= { fsDot11ACConfigEntry 41} fsDot11OperatingModeNotificationImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the entity is Operating Mode Notification capable." ::= { fsDot11ACConfigEntry 42 } fsDot11ExtendedChannelSwitchActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object when true, indicates that the station implementation is capable of supporting Extended Channel Switch Announcement. The capability is disabled, otherwise." DEFVAL { false } ::= { fsDot11ACConfigEntry 43 } fsDot11FragmentationThreshold OBJECT-TYPE SYNTAX Unsigned32 (256..11500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the current maximum size of the MPDU (in octets) that may be delivered to the security encapsulation. This maximum size does not apply when an MSDU is transmitted using an HT-immediate or HTdelayed Block Ack agreement, or when an MSDU or MMPDU is carried in an AMPDU that does not contain a VHT single MPDU. Fields added to the frame by security encapsulation are not counted against the limit specified by this object. Except as described above, an MSDU or MMPDU is fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold, excluding security encapsulation fields. The default value for this object is less than 11500 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY. This object is the extension of the previously available fragmentation threshold Mib available in fswlan.mib" ::= { fsDot11ACConfigEntry 44 } -- ******************************************************************** -- * End of 11acConfigTable TABLE -- ******************************************************************** -- ******************************************************************** -- * fsDot11VHTStationConfigTABLE -- ******************************************************************** fsDot11VHTStationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11VHTStationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the entry in VHTStationConfig TABLE to allow multiple instances on an agent." ::= { fsDot11VHTStationConfig 1 } fsDot11VHTStationConfigEntry OBJECT-TYPE SYNTAX FsDot11VHTStationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry (conceptual row) in the dot11VHTStationConfig Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { fsDot11VHTStationConfigTable 1 } FsDot11VHTStationConfigEntry ::= SEQUENCE { fsDot11VHTRxHighestDataRateConfig Unsigned32, fsDot11VHTTxHighestDataRateConfig Unsigned32 } fsDot11VHTRxHighestDataRateConfig OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the highest data rate in Mb/s that the STA is capable of receiving." DEFVAL { 0 } ::= { fsDot11VHTStationConfigEntry 1 } fsDot11VHTTxHighestDataRateConfig OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the highest data rate in Mb/s that the STA is capable of transmitting." DEFVAL { 0 } ::= { fsDot11VHTStationConfigEntry 2 } -- ******************************************************************** -- * End of fsDot11VHTStationConfig TABLE -- ******************************************************************** -- ****************************** ************************************** -- * fsDot11PhyVHT TABLE -- ******************************************************************** fsDot11PhyVHTTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11PhyVHTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the entry of attributes in dot11PhyVHTTable. Implemented as a table indexed on ifIndex to allow for multiple instances on an agent." ::= { fsDot11PhyVHT 1 } fsDot11PhyVHTEntry OBJECT-TYPE SYNTAX FsDot11PhyVHTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry in the dot11PhyVHTEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX {ifIndex} ::= { fsDot11PhyVHTTable 1 } FsDot11PhyVHTEntry ::= SEQUENCE { fsDot11NumberOfSpatialStreamsImplemented Unsigned32, fsDot11NumberOfSpatialStreamsActivated Unsigned32 } fsDot11NumberOfSpatialStreamsImplemented OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum number of spatial streams implemented." DEFVAL { 3 } ::= { fsDot11PhyVHTEntry 1 } fsDot11NumberOfSpatialStreamsActivated OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum number of spatial streams enabled." DEFVAL { 3 } ::= { fsDot11PhyVHTEntry 2 } -- ******************************************************************** -- * End of fsDot11PhyVHT TABLE -- ******************************************************************** END