-- ============================================================================ -- AT-ALMMON-MIB, Allied Telesis enterprise MIB: -- Alarm Monitoring MIB objects. -- -- Copyright (c) 2014 by Allied Telesis, Inc. -- All rights reserved. -- -- ============================================================================ AT-ALMMON-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayStringUnsized FROM AT-SMI-MIB sysinfo FROM AT-SYSINFO-MIB Unsigned32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC; atAlmMon MODULE-IDENTITY LAST-UPDATED "201902120000Z" ORGANIZATION "Allied Telesis, Inc" CONTACT-INFO "http://www.alliedtelesis.com" DESCRIPTION "The AT Alarm Monitoring MIB for managing and reporting device alarms." REVISION "201902120000Z" DESCRIPTION "Extended to support per stack member configuration." REVISION "201809200000Z" DESCRIPTION "Added UFO alarm type. Removed AtAlmMonAlarmType zero enumeration." REVISION "201702080000Z" DESCRIPTION "Added g8032 as an alarm type." REVISION "201405120015Z" DESCRIPTION "Changes from maintainer review" REVISION "201312131146Z" DESCRIPTION "Initial Revision" ::= { sysinfo 26 } -- -- Textual conventions -- AtAlmMonAlarmType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the type of a monitored alarm." SYNTAX INTEGER { externalPSU(1), epsr(2), contactInput(3), portLinkDown(4), loopDetect(5), mainPse(6), portPoeFailure(7), temperature(8), g8032(9), ufo(10) } AtAlmMonActionUseOutput ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates whether or not the output device (relay or fault LED) is used for this alarm." SYNTAX INTEGER { unused(1), used(2) } AtAlmMonAbnormalState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the abnormal (i.e. alarm active) state for a contact input alarm monitor." SYNTAX INTEGER { open(1), closed(2) } AtAlmMonActionState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the current state of this alarm monitor." SYNTAX INTEGER { inactive(1), active(2) } AtAlmMonContactPosition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the position state for a contact input." SYNTAX INTEGER { open(1), closed(2) } -- -- Node definitions -- -- ---------------------------------------------------------- -- -- The Alarm Monitoring actions table -- ---------------------------------------------------------- -- atAlmMonActionTable OBJECT-TYPE SYNTAX SEQUENCE OF AtAlmMonActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information describing alarm monitoring inputs and consequent actions (i.e. fault LED & relay outputs)." ::= { atAlmMon 1 } atAlmMonActionEntry OBJECT-TYPE SYNTAX AtAlmMonActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The description and configuration of what to do for a specific monitored alarm." INDEX { atAlmMonActionStackMemberId, atAlmMonActionIndex } ::= { atAlmMonActionTable 1 } AtAlmMonActionEntry ::= SEQUENCE { atAlmMonActionStackMemberId Unsigned32, atAlmMonActionIndex Unsigned32, atAlmMonAlarmType AtAlmMonAlarmType, atAlmMonAlarmTypeSelection Unsigned32, atAlmMonActionDescription DisplayStringUnsized, atAlmMonActionUseRelay1 AtAlmMonActionUseOutput, atAlmMonActionUseRelay2 AtAlmMonActionUseOutput, atAlmMonActionUseRelay3 AtAlmMonActionUseOutput, atAlmMonActionUseFaultLed AtAlmMonActionUseOutput, atAlmMonAbnormalState AtAlmMonAbnormalState, atAlmMonActionState AtAlmMonActionState } atAlmMonActionStackMemberId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the stack member of this alarm action." ::= { atAlmMonActionEntry 1 } atAlmMonActionIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numeric identifier of this alarm action." ::= { atAlmMonActionEntry 2 } atAlmMonAlarmType OBJECT-TYPE SYNTAX AtAlmMonAlarmType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of alarm that this action monitors." ::= { atAlmMonActionEntry 3 } atAlmMonAlarmTypeSelection OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The 1-based index of the alarm of the particular type (as catagorised by atAlmMonAlarmType)." ::= { atAlmMonActionEntry 4 } atAlmMonActionDescription OBJECT-TYPE SYNTAX DisplayStringUnsized (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of this alarm monitoring entry." ::= { atAlmMonActionEntry 5 } atAlmMonActionUseRelay1 OBJECT-TYPE SYNTAX AtAlmMonActionUseOutput MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates/controls whether or not this alarm monitor drives the first relay output." ::= { atAlmMonActionEntry 6 } atAlmMonActionUseRelay2 OBJECT-TYPE SYNTAX AtAlmMonActionUseOutput MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates/controls whether or not this alarm monitor drives the second relay output." ::= { atAlmMonActionEntry 7 } atAlmMonActionUseRelay3 OBJECT-TYPE SYNTAX AtAlmMonActionUseOutput MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates/controls whether or not this alarm monitor drives the third relay output." ::= { atAlmMonActionEntry 8 } atAlmMonActionUseFaultLed OBJECT-TYPE SYNTAX AtAlmMonActionUseOutput MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates/controls whether or not this alarm monitor drives the fault LED." ::= { atAlmMonActionEntry 9 } atAlmMonAbnormalState OBJECT-TYPE SYNTAX AtAlmMonAbnormalState MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates/sets the abnormal (i.e. alarm active) state for a contact input. Only used for contactInput alarm monitors, ignored for all other types." ::= { atAlmMonActionEntry 10 } atAlmMonActionState OBJECT-TYPE SYNTAX AtAlmMonActionState MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state of this alarm monitor." ::= { atAlmMonActionEntry 11 } -- -- Tables to support per stack configuration -- -- ---------------------------------------------------------- -- -- The Alarm Monitoring available alarms table -- ---------------------------------------------------------- -- atAlmMonPerStackConfiguration OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether to support per stack member configuration. A true value means that atAlmMonAvailableTable, atAlmMonOutputRelayTable, atAlmMonOutputLedTable and atAlmMonIutputContactTable are supported. A notTrue value means that atAlmMonActionTable is supported. This object should be set to a value that reflects the way that alarm monitors are actually configured or to be configured." ::= { atAlmMon 2 } atAlmMonAvailableTable OBJECT-TYPE SYNTAX SEQUENCE OF AtAlmMonAvailableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information listing available alarms on the device." ::= { atAlmMon 3 } atAlmMonAvailableEntry OBJECT-TYPE SYNTAX AtAlmMonAvailableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The description and configuration of each available alarm." INDEX { atAlmMonAvailableAlarmId } ::= { atAlmMonAvailableTable 1 } AtAlmMonAvailableEntry ::= SEQUENCE { atAlmMonAvailableAlarmId Unsigned32, atAlmMonAvailableType AtAlmMonAlarmType, atAlmMonAvailableTypeIndex Unsigned32, atAlmMonAvailableStkId Unsigned32, atAlmMonAvailableIfName DisplayStringUnsized, atAlmMonAvailableState AtAlmMonActionState } atAlmMonAvailableAlarmId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique numeric identifier for this alarm." ::= { atAlmMonAvailableEntry 1 } atAlmMonAvailableType OBJECT-TYPE SYNTAX AtAlmMonAlarmType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this alarm, such as externalPSU(1), epsr(2), etc." ::= { atAlmMonAvailableEntry 2 } atAlmMonAvailableTypeIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the particular alarm type (catagorised by atAlmMonAlarmType). For some alarms there are multiple sources on the device (i.e. power supplies). In these cases this object indicates which source the alarm is for (i.e. power supply 1, or power supply 2). This object is used for externalPSU(1) and contactInput(3) alarm only." ::= { atAlmMonAvailableEntry 3 } atAlmMonAvailableStkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of stack member this alarm triggers on. This object is used for externalPSU(1), contactInput(3), portLinkDown(4), portPoeFailure(7) and temperature(8) alarm only." ::= { atAlmMonAvailableEntry 4 } atAlmMonAvailableIfName OBJECT-TYPE SYNTAX DisplayStringUnsized (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the specific interface that this alarm triggers on, such as 'port1.0.1. This object is used for portLinkDown(4) and portPoeFailure(7) alarm only." ::= { atAlmMonAvailableEntry 5 } atAlmMonAvailableState OBJECT-TYPE SYNTAX AtAlmMonActionState MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state of this alarm." ::= { atAlmMonAvailableEntry 6 } -- ---------------------------------------------------------- -- -- The Alarm Monitoring output relay table -- ---------------------------------------------------------- -- atAlmMonOutputRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AtAlmMonOutputRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all associations existing on the device between output relays and alarms. Theoretically, an output relay on the device can be triggered by multiple alarms and an alarm can trigger multiple output relays." ::= { atAlmMon 4 } atAlmMonOutputRelayEntry OBJECT-TYPE SYNTAX AtAlmMonOutputRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry reprents an association between one ouput relay and one alarm. To configure an alarm to use an output relay, a user needs to create a new entry. This can be done through writing a value of used(2) to object atAlmMonOutputRelayUsage that is specified by atAlmMonOutputRelayStkId, atAlmMonOutputRelayNumber, and atAlmMonOutputRelayAlarmId. To reconfigure an alarm not to use an output relay, a user needs to delete the entry. This can be done by writing a value of unused(1) to object atAlmMonOutputRelayUsage." INDEX { atAlmMonOutputRelayStkId, atAlmMonOutputRelayNumber, atAlmMonOutputRelayAlarmId } ::= { atAlmMonOutputRelayTable 1 } AtAlmMonOutputRelayEntry ::= SEQUENCE { atAlmMonOutputRelayStkId Unsigned32, atAlmMonOutputRelayNumber Unsigned32, atAlmMonOutputRelayAlarmId Unsigned32, atAlmMonOutputRelayUsage AtAlmMonActionUseOutput } atAlmMonOutputRelayStkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of stack member that the relay(s) reside on." ::= { atAlmMonOutputRelayEntry 1 } atAlmMonOutputRelayNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number (i.e. the 1 based index) of the relay." ::= { atAlmMonOutputRelayEntry 2 } atAlmMonOutputRelayAlarmId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of the alarm that may use this relay output." ::= { atAlmMonOutputRelayEntry 3 } atAlmMonOutputRelayUsage OBJECT-TYPE SYNTAX AtAlmMonActionUseOutput MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether or not the relay output is used. Since there are entries only for existing associations between the output relays and the alarms, the object value should be always used(2). If a user sets a value of unused(1) to this object, then the whole entry will be deleted. If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id, relay number and alarm id are specified properly in the index." ::= { atAlmMonOutputRelayEntry 4 } -- ---------------------------------------------------------- -- -- The Alarm Monitoring output led table -- ---------------------------------------------------------- -- atAlmMonOutputLedTable OBJECT-TYPE SYNTAX SEQUENCE OF AtAlmMonOutputLedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all associations existing on the device between output LED(s) and alarms. Theoretically, an output LED on the device can be triggered by multiple alarms and an alarm can trigger multiple LED(s)." ::= { atAlmMon 5 } atAlmMonOutputLedEntry OBJECT-TYPE SYNTAX AtAlmMonOutputLedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry reprents an association between one LED and one alarm. To configure an alarm to use an output LED, a user needs to create a new entry. This can be done through writing a value of used(2) to object atAlmMonOutputLedUsage that is specified by atAlmMonOutputLedStkId and atAlmMonOutputRelayAlarmId. To reconfigure an alarm not to use an output LED, a user needs to delete the entry. This can be done by writing a value of unused(1) to object atAlmMonOutputLedUsage." INDEX { atAlmMonOutputRelayStkId, atAlmMonOutputRelayAlarmId } ::= { atAlmMonOutputLedTable 1 } AtAlmMonOutputLedEntry ::= SEQUENCE { atAlmMonOutputLedStkId Unsigned32, atAlmMonOutputLedAlarmId Unsigned32, atAlmMonOutputLedUsage AtAlmMonActionUseOutput } atAlmMonOutputLedStkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of stack member that the output LED resides on." ::= { atAlmMonOutputLedEntry 1 } atAlmMonOutputLedAlarmId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of the alarm that may use this output LED." ::= { atAlmMonOutputLedEntry 2 } atAlmMonOutputLedUsage OBJECT-TYPE SYNTAX AtAlmMonActionUseOutput MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether or not an LED is used. Since there are entries only for existing associations between the output LED(s) and the alarms, the object value should be always used(2). If a user sets a value of unused(1) to this object, then the whole entry will be deleted. If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id and alarm id are specified properly in the index." ::= { atAlmMonOutputLedEntry 3 } -- ---------------------------------------------------------- -- -- The Alarm Monitoring input contact table -- ---------------------------------------------------------- -- atAlmMonInputContactTable OBJECT-TYPE SYNTAX SEQUENCE OF AtAlmMonInputContactEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all input contacts on the device and their positions." ::= { atAlmMon 6 } atAlmMonInputContactEntry OBJECT-TYPE SYNTAX AtAlmMonInputContactEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of each input contact configuration." INDEX { atAlmMonInputContactStkId, atAlmMonInputContactNumber } ::= { atAlmMonInputContactTable 1 } AtAlmMonInputContactEntry ::= SEQUENCE { atAlmMonInputContactStkId Unsigned32, atAlmMonInputContactNumber Unsigned32, atAlmMonInputContactPosition AtAlmMonContactPosition } atAlmMonInputContactStkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of stack member that the input contact reside on." ::= { atAlmMonInputContactEntry 1 } atAlmMonInputContactNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number (i.e. the 1 based index) of the input contact." ::= { atAlmMonInputContactEntry 2 } atAlmMonInputContactPosition OBJECT-TYPE SYNTAX AtAlmMonContactPosition MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the position of the input contact. It is either open or closed. A user can reconfigure the position of an input contact by setting a different value to this object." ::= { atAlmMonInputContactEntry 3 } END -- -- at-almmon.mib --