-- ***************************************************************** -- AETHRA-MIB: Aethra Telecommunications Enterprise MIB file -- ATOS Compatible Version: 5.6 and previous, minimum version for all features is 5.6.14 -- -- Copyright (c) 2012 by -- A TLC srl - Aethra Telecommunications -- Legal Office: Via G.B. Martini,2 - 00198 ROMA - ITALY -- Operating Office: Via 1° Maggio, 26 - 60131 ANCONA - ITALY -- Phone: +39 071 250 651 -- E-Mail: info@aethra.com -- -- All rights reserved. -- -- ***************************************************************** AETHRA-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 enterprises, IpAddress, Counter, Gauge FROM RFC1155-SMI DisplayString, PhysAddress, ifDescr, ifIndex FROM RFC1213-MIB IANAifType FROM IANAifType-MIB; -- -- Node definitions -- -- Prefix: iso.org.dod.internet.private.enterprise (1.3.6.1.4.1) -- aethra OBJECT IDENTIFIER ::= { enterprises 7745 } atosnt OBJECT IDENTIFIER ::= { aethra 5 } tools OBJECT IDENTIFIER ::= { atosnt 1 } -- Tools Node system OBJECT IDENTIFIER ::= { atosnt 2 } -- System Node dsl OBJECT IDENTIFIER ::= { atosnt 3 } -- DSL Node voip OBJECT IDENTIFIER ::= { atosnt 4 } -- Voip Node traps OBJECT IDENTIFIER ::= { atosnt 5 } -- Traps Node ifc OBJECT IDENTIFIER ::= { atosnt 6 } -- Interfaces Node fileTransfer OBJECT IDENTIFIER ::= { tools 1 } -- fileTransfer Node fileTransferProtocol OBJECT-TYPE SYNTAX INTEGER { tftp(1), ftp(2), http(3), file(4), scp(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the protocol for file transfer command. The protocol file(4) reads from a local disk for download command, writes to a local disk for upload. OID: 1.3.6.1.4.1.7745.5.1.1.1" ::= { fileTransfer 1 } fileTransferFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name of the file to download or upload. When using HTTP protocol set full url as fileTransferFileName. OID: 1.3.6.1.4.1.7745.5.1.1.2" ::= { fileTransfer 2 } fileTransferServerName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or IP address of remote server when using TFTP or FTP protocol. When not configured systemDefaultTftpServer or systemDefaultFtpServer is used for the respective protocols. OID: 1.3.6.1.4.1.7745.5.1.1.3" ::= { fileTransfer 3 } fileTransferOption OBJECT-TYPE SYNTAX INTEGER { firmware(1), boot(2), userconf(3), logs(4), package(5), localfile(6), welcome(7), license(8), certificate(9), defaultconf(10), bannerPre(11), bannerPost(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the type of file you are downloading or uploading. When not configured firmware type is used. firmware(1) is the operating system file, boot(2) is the system boot, userconf(3) is the current system configuration file, logs(4) is the logs file and is available only for upload command, package(5) is bundle is a package that contains boot and os in a single file, localfile(6) is any file you want to download or upload in the system, welcome(7) is a text message displayed before access to system console by telnet or ssh, license(8) is a license file to enable advanced system features, certificate(9) is the custom certificate file for the security protocol system (SSL), defaultconf(10) is the custom default configuration file, bannerPre(10) is available only from version 5.6.11, is a custom pre login banner file, bannerPost(10)is available only from version 5.6.11, is a custom post login banner file. OID: 1.3.6.1.4.1.7745.5.1.1.4" ::= { fileTransfer 4 } fileTransferStorageFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name of the local file when using file(4) protocol. OID: 1.3.6.1.4.1.7745.5.1.1.5" ::= { fileTransfer 5 } fileTransferExec OBJECT-TYPE SYNTAX INTEGER { noaction(0), download(1), upload(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to start download or upload. OID: 1.3.6.1.4.1.7745.5.1.1.6" ::= { fileTransfer 6 } fileTransferStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the current status of file transfer command. OID: 1.3.6.1.4.1.7745.5.1.1.7" ::= { fileTransfer 7 } ping OBJECT IDENTIFIER ::= { tools 2 } -- Ping Node pingParameters OBJECT IDENTIFIER ::= { ping 1 } -- Ping Parameters Node pingHost OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the host name or IP address to ping. OID: 1.3.6.1.4.1.7745.5.1.2.1.1" ::= { pingParameters 1 } pingSize OBJECT-TYPE SYNTAX INTEGER (1..8192) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the size of ping packet. OID: 1.3.6.1.4.1.7745.5.1.2.1.2" ::= { pingParameters 2 } pingTries OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the number of ping tries. OID: 1.3.6.1.4.1.7745.5.1.2.1.3" ::= { pingParameters 3 } pingTTL OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure ping TTL option. OID: 1.3.6.1.4.1.7745.5.1.2.1.4" ::= { pingParameters 4 } pingTimeOut OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure ping response timeout (sec). OID: 1.3.6.1.4.1.7745.5.1.2.1.5" ::= { pingParameters 5 } pingSource OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or IP address of the ping source. OID: 1.3.6.1.4.1.7745.5.1.2.1.6" ::= { pingParameters 6 } pingStart OBJECT-TYPE SYNTAX INTEGER { noaction(0), start(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to start ping. OID: 1.3.6.1.4.1.7745.5.1.2.1.7" ::= { pingParameters 7 } pingStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the current status of ping command. OID: 1.3.6.1.4.1.7745.5.1.2.1.8" ::= { pingParameters 8 } pingStatistics OBJECT IDENTIFIER ::= { ping 2 } -- Ping Statistics Node pingTXpacket OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the number of packets transmitted. OID: 1.3.6.1.4.1.7745.5.1.2.2.1" ::= { pingStatistics 1 } pingRXpacket OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the number of packets received. OID: 1.3.6.1.4.1.7745.5.1.2.2.2" ::= { pingStatistics 2 } pingLOSTpacket OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the number of packets losted. OID: 1.3.6.1.4.1.7745.5.1.2.2.3" ::= { pingStatistics 3 } pingMinRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the minimum Round Trip Time (RTT) value. OID: 1.3.6.1.4.1.7745.5.1.2.2.4" ::= { pingStatistics 4 } pingMaxRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the maximum Round Trip Time (RTT) value. OID: 1.3.6.1.4.1.7745.5.1.2.2.5" ::= { pingStatistics 5 } pingAvgRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the average Round Trip Time (RTT) value. OID: 1.3.6.1.4.1.7745.5.1.2.2.6" ::= { pingStatistics 6 } -- System Parameters systemLoglevel OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the log level of the node system. OID: 1.3.6.1.4.1.7745.5.2.1" ::= { system 1 } systemDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure system description. OID: 1.3.6.1.4.1.7745.5.2.2 " ::= { system 2 } systemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure system name, it's also used as network hostname. OID: 1.3.6.1.4.1.7745.5.2.3" ::= { system 3 } systemLocalDomain OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure system local domain, it's also used as network workgroup. OID: 1.3.6.1.4.1.7745.5.2.4" ::= { system 4 } systemDefaultTftpServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or IP address for the default remote TFTP server. OID: 1.3.6.1.4.1.7745.5.2.5" ::= { system 5 } systemTftpLocalAdd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or the local IP address used by the TFTP client. OID: 1.3.6.1.4.1.7745.5.2.6" ::= { system 6 } systemDefaultFtpServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or IP address and port for the default remote FTP server. OID: 1.3.6.1.4.1.7745.5.2.7" ::= { system 7 } systemFtpLocalAdd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or the local IP address used by the FTP client. OID: 1.3.6.1.4.1.7745.5.2.8" ::= { system 8 } systemFtpUsername OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the username for the default remote FTP server. OID: 1.3.6.1.4.1.7745.5.2.9" ::= { system 9 } systemFtpPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the password for the default remote FTP server. OID: 1.3.6.1.4.1.7745.5.2.10" ::= { system 10 } systemAAAProfile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the AAA profile used by the system. OID: 1.3.6.1.4.1.7745.5.2.11 " ::= { system 11 } systemAAALogTimeout OBJECT-TYPE SYNTAX INTEGER (1..300) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the AAA login timeout. OID: 1.3.6.1.4.1.7745.5.2.12" ::= { system 12 } systemBackupAuth OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to enable the backup authentication system. OID: 1.3.6.1.4.1.7745.5.2.13" ::= { system 13 } systemScrollLine OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to enable the system scroll line. OID: 1.3.6.1.4.1.7745.5.2.14" ::= { system 14 } systemKernelLogs OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to enable the system kernel logs OID: 1.3.6.1.4.1.7745.5.2.15" ::= { system 15 } systemCryptedPassword OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to enable the system crypted password. OID: 1.3.6.1.4.1.7745.5.2.16" ::= { system 16 } systemSave OBJECT-TYPE SYNTAX INTEGER { noaction(0), save(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to save current configuration. OID: 1.3.6.1.4.1.7745.5.2.17" ::= { system 17 } systemRestart OBJECT IDENTIFIER ::= { system 18 } -- Restart Node restartOption OBJECT-TYPE SYNTAX INTEGER { saveConf(0), notSaveConf(1), restoreDefaultConf(2), restoreFactoryDefault(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to choose restart command option. saveConf(0) saving configuration changes before restart the system, notSaveConf(1) restart the system without saving configuration changes, restoreDefaultConf(2) restart the system with the default configuration, restoreFactoryDefault(3) available only from version 5.6.14, restart the system with the factory default. OID: 1.3.6.1.4.1.7745.5.2.18.1" ::= { systemRestart 1 } restartDelay OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure restart timeout (sec). OID: 1.3.6.1.4.1.7745.5.2.18.2" ::= { systemRestart 2 } restartExec OBJECT-TYPE SYNTAX INTEGER { noaction(0), restart(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to restart the system. OID: 1.3.6.1.4.1.7745.5.2.18.3" ::= { systemRestart 3 } restartStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the current status of restart command. OID: OID: 1.3.6.1.4.1.7745.5.2.18.4" ::= { systemRestart 4 } performance OBJECT IDENTIFIER ::= { system 19 } -- Performance Monitor Node performanceCpuAvg1min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the CPU average utilization in 1 minute (in %). OID: 1.3.6.1.4.1.7745.5.2.19.1" ::= { performance 1 } performanceCpuAvg5min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the CPU average utilization in 5 minute (in %). OID: 1.3.6.1.4.1.7745.5.2.19.2" ::= { performance 2 } performanceCpuAvg15min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the CPU average utilization in 15 minute (in %). OID: 1.3.6.1.4.1.7745.5.2.19.3" ::= { performance 3 } performanceDynMemLoad OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the usage of dynamic memory (in %). OID: 1.3.6.1.4.1.7745.5.2.19.4" ::= { performance 4 } performanceDynMemTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the total dynamic memory (in KBytes). OID: 1.3.6.1.4.1.7745.5.2.19.5" ::= { performance 5 } performanceDynMemFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the free dynamic memory (in KBytes). OID: 1.3.6.1.4.1.7745.5.2.19.6" ::= { performance 6 } systemDefaultScpServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the name or IP address and port for the default remote SCP server. OID: 1.3.6.1.4.1.7745.5.2.20" ::= { system 20 } systemScpUsername OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the username for the default remote SCP server. OID: 1.3.6.1.4.1.7745.5.2.21" ::= { system 21 } systemScpPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the password for the default remote SCP server. OID: 1.3.6.1.4.1.7745.5.2.22" ::= { system 22 } systemConsoleEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to enable or disable serial console. OID: 1.3.6.1.4.1.7745.5.2.23" ::= { system 23 } systemLogMsgRate OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure the maximum number of log messages per minute. A value set to 0 (zero) is equivalent to unlimited. OID: 1.3.6.1.4.1.7745.5.2.24" ::= { system 24 } xdsl OBJECT IDENTIFIER ::= { dsl 1 } -- xDSL Node xdslTable OBJECT-TYPE SYNTAX SEQUENCE OF XdslEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of xdsl interface entries. OID: 1.3.6.1.4.1.7745.5.3.1.1" ::= { xdsl 1 } xdslEntry OBJECT-TYPE SYNTAX XdslEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.3.1.1.1" INDEX { xdslIndex } ::= { xdslTable 1 } XdslEntry ::= SEQUENCE { xdslIndex INTEGER, xdslLinkStatus DisplayString, xdslTc DisplayString, xdslUsAttenuation INTEGER, xdslDsAttenuation INTEGER, xdslUsNoiseMargin INTEGER, xdslDsNoiseMargin INTEGER, xdslUsCurrRate INTEGER, xdslDsCurrRate INTEGER, xdslModulationType DisplayString, xdslUsMaxTheorRate INTEGER, xdslDsMaxTheorRate INTEGER, xdslUsTotBytes INTEGER, xdslDsTotBytes INTEGER, xdslNeTotCrcErr INTEGER, xdslNeShowtimeCrcErr INTEGER } xdslIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.1" ::= { xdslEntry 1 } xdslLinkStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the link status. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.2" ::= { xdslEntry 2 } xdslTc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link transmission convergence. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.3" ::= { xdslEntry 3 } xdslUsAttenuation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link upstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.4" ::= { xdslEntry 4 } xdslDsAttenuation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link downstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.5" ::= { xdslEntry 5 } xdslUsNoiseMargin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link upstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.6" ::= { xdslEntry 6 } xdslDsNoiseMargin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link downstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.7" ::= { xdslEntry 7 } xdslUsCurrRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link upstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.8" ::= { xdslEntry 8 } xdslDsCurrRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link downstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.9" ::= { xdslEntry 9 } xdslModulationType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link modulation type. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.10" ::= { xdslEntry 10 } xdslUsMaxTheorRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link upstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.11" ::= { xdslEntry 11 } xdslDsMaxTheorRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link downstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.12" ::= { xdslEntry 12 } xdslUsTotBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link upstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.13" ::= { xdslEntry 13 } xdslDsTotBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link downstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.14" ::= { xdslEntry 14 } xdslNeTotCrcErr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link near-end total CRC errors. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.15" ::= { xdslEntry 15 } xdslNeShowtimeCrcErr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read link near-end last showtime CRC errors. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.16" ::= { xdslEntry 16 } shdsl OBJECT IDENTIFIER ::= { dsl 2 } -- SHDSL Node shdslTable OBJECT-TYPE SYNTAX SEQUENCE OF ShdslEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of shdsl physical interface entries. OID: 1.3.6.1.4.1.7745.5.3.2.1" ::= { shdsl 1 } shdslEntry OBJECT-TYPE SYNTAX ShdslEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.3.2.1.1" INDEX { shdslIndex } ::= { shdslTable 1 } ShdslEntry ::= SEQUENCE { shdslIndex INTEGER, shdslPhyStatus DisplayString, shdslTc DisplayString, shdslUsAttenuation INTEGER, shdslDsAttenuation INTEGER, shdslUsNoiseMargin INTEGER, shdslDsNoiseMargin INTEGER, shdslUsCurrRate INTEGER, shdslDsCurrRate INTEGER, shdslModulationType DisplayString, shdslUsMaxTheorRate INTEGER, shdslDsMaxTheorRate INTEGER, shdslUsTotBytes INTEGER, shdslDsTotBytes INTEGER, shdslNeTotCrcErr INTEGER, shdslNeShowtimeCrcErr INTEGER, shdslUsPower INTEGER, shdslDsPower INTEGER } shdslIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.1" ::= { shdslEntry 1 } shdslPhyStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical status. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.2" ::= { shdslEntry 2 } shdslTc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical transmission convergence. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.3" ::= { shdslEntry 3 } shdslUsAttenuation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical upstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.4" ::= { shdslEntry 4 } shdslDsAttenuation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical downstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.5" ::= { shdslEntry 5 } shdslUsNoiseMargin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical upstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.6" ::= { shdslEntry 6 } shdslDsNoiseMargin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical downstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.7" ::= { shdslEntry 7 } shdslUsCurrRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical upstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.8" ::= { shdslEntry 8 } shdslDsCurrRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical downstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.9" ::= { shdslEntry 9 } shdslModulationType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical modulation type. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.10" ::= { shdslEntry 10 } shdslUsMaxTheorRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical upstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.11" ::= { shdslEntry 11 } shdslDsMaxTheorRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical downstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.12" ::= { shdslEntry 12 } shdslUsTotBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical upstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.13" ::= { shdslEntry 13 } shdslDsTotBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical downstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.14" ::= { shdslEntry 14 } shdslNeTotCrcErr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical near-end total CRC errors. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.15" ::= { shdslEntry 15 } shdslNeShowtimeCrcErr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical near-end last showtime CRC errors. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.16" ::= { shdslEntry 16 } shdslUsPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical Us Power. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.17" ::= { shdslEntry 17 } shdslDsPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read physical Ds Power. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.18" ::= { shdslEntry 18 } trunk OBJECT IDENTIFIER ::= { voip 1 } -- Voip Trunk trunkTable OBJECT-TYPE SYNTAX SEQUENCE OF TrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of configured voip SIP trunk. OID: 1.3.6.1.4.1.7745.5.4.1.1" ::= { trunk 1 } trunkEntry OBJECT-TYPE SYNTAX TrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.4.1.1.1" INDEX { trunkIndex } ::= { trunkTable 1 } TrunkEntry ::= SEQUENCE { trunkIndex INTEGER, trunkName DisplayString, trunkType DisplayString, trunkEnable INTEGER, trunkDescription DisplayString, trunkUserName DisplayString, trunkRegHost DisplayString, trunkProxyHost DisplayString, trunkIfcStatus DisplayString, trunkRegStatus DisplayString, trunkMsgWait DisplayString } trunkIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.1" ::= { trunkEntry 1 } trunkName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk name. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.2" ::= { trunkEntry 2 } trunkType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk type. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.3" ::= { trunkEntry 3 } trunkEnable OBJECT-TYPE SYNTAX INTEGER { registered(1), unregistered(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get this parameter to read trunk registration enable. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.4" ::= { trunkEntry 4 } trunkDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk description. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.5" ::= { trunkEntry 5 } trunkUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk username. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.6" ::= { trunkEntry 6 } trunkRegHost OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk registar host. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.7" ::= { trunkEntry 7 } trunkProxyHost OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk proxy host. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.8" ::= { trunkEntry 8 } trunkIfcStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk interface status. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.9" ::= { trunkEntry 9 } trunkRegStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk registration status. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.10" ::= { trunkEntry 10 } trunkMsgWait OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk message wait status. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.11" ::= { trunkEntry 11 } trunkIsdnTable OBJECT-TYPE SYNTAX SEQUENCE OF TrunkIsdnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of configured voip ISDN trunk. OID: 1.3.6.1.4.1.7745.5.4.1.2" ::= { trunk 2 } trunkIsdnEntry OBJECT-TYPE SYNTAX TrunkIsdnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.4.1.2.1" INDEX { trunkIsdnIndex } ::= { trunkIsdnTable 1 } TrunkIsdnEntry ::= SEQUENCE { trunkIsdnIndex INTEGER, trunkIsdnName DisplayString, trunkIsdnType DisplayString, trunkIsdnEnable INTEGER, trunkIsdnDescription DisplayString, trunkIsdnB1Status DisplayString, trunkIsdnB2Status DisplayString } trunkIsdnIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.1" ::= { trunkIsdnEntry 1 } trunkIsdnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk name. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.2" ::= { trunkIsdnEntry 2 } trunkIsdnType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk type. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.3" ::= { trunkIsdnEntry 3 } trunkIsdnEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get this parameter to read trunk enable configuration. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.4" ::= { trunkIsdnEntry 4 } trunkIsdnDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk description. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.5" ::= { trunkIsdnEntry 5 } trunkIsdnB1Status OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk B1 status. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.6" ::= { trunkIsdnEntry 6 } trunkIsdnB2Status OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk B2 status. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.7" ::= { trunkIsdnEntry 7 } trunkFxoTable OBJECT-TYPE SYNTAX SEQUENCE OF TrunkFxoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of configured voip FXO trunk. OID: 1.3.6.1.4.1.7745.5.4.1.3" ::= { trunk 3 } trunkFxoEntry OBJECT-TYPE SYNTAX TrunkFxoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.4.1.3.1" INDEX { trunkFxoIndex } ::= { trunkFxoTable 1 } TrunkFxoEntry ::= SEQUENCE { trunkFxoIndex INTEGER, trunkFxoName DisplayString, trunkFxoType DisplayString, trunkFxoEnable INTEGER, trunkFxoDescription DisplayString, trunkFxoStatus DisplayString } trunkFxoIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.1" ::= { trunkFxoEntry 1 } trunkFxoName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk name. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.2" ::= { trunkFxoEntry 2 } trunkFxoType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk type. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.3" ::= { trunkFxoEntry 3 } trunkFxoEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get this parameter to read trunk enable configuration. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.4" ::= { trunkFxoEntry 4 } trunkFxoDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk description. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.5" ::= { trunkFxoEntry 5 } trunkFxoStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read trunk status. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.6" ::= { trunkFxoEntry 6 } userTerminal OBJECT IDENTIFIER ::= { voip 2 } -- Voip User Terminal usTermPotsTable OBJECT-TYPE SYNTAX SEQUENCE OF UsTermPotsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of configured voip POTS user terminal. OID: 1.3.6.1.4.1.7745.5.4.2.1" ::= { userTerminal 1 } usTermPotsEntry OBJECT-TYPE SYNTAX UsTermPotsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.4.2.1.1" INDEX { usTermPotsIndex } ::= { usTermPotsTable 1 } UsTermPotsEntry ::= SEQUENCE { usTermPotsIndex INTEGER, usTermPotsEnable INTEGER, usTermPotsDescription DisplayString, usTermPotsStatus DisplayString, usTermPotsDspSlic DisplayString } usTermPotsIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.1" ::= { usTermPotsEntry 1 } usTermPotsEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get this parameter to read user terminal enable configuration. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.2" ::= { usTermPotsEntry 2 } usTermPotsDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal description. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.3" ::= { usTermPotsEntry 3 } usTermPotsStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal status. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.4" ::= { usTermPotsEntry 4 } usTermPotsDspSlic OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal DSP Slic. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.5" ::= { usTermPotsEntry 5 } usTermISDNTable OBJECT-TYPE SYNTAX SEQUENCE OF UsTermISDNEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of configured voip ISDN user terminal. OID: 1.3.6.1.4.1.7745.5.4.2.2" ::= { userTerminal 2 } usTermISDNEntry OBJECT-TYPE SYNTAX UsTermISDNEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.4.2.2.1" INDEX { usTermISDNIndex } ::= { usTermISDNTable 1 } UsTermISDNEntry ::= SEQUENCE { usTermISDNIndex INTEGER, usTermISDNEnable INTEGER, usTermISDNDescription DisplayString, usTermIsdnStatusB1 DisplayString, usTermIsdnStatusB2 DisplayString } usTermISDNIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.1" ::= { usTermISDNEntry 1 } usTermISDNEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get this parameter to read user terminal enable configuration. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.2" ::= { usTermISDNEntry 2 } usTermISDNDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal description. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.3" ::= { usTermISDNEntry 3 } usTermIsdnStatusB1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal B1 status. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.4" ::= { usTermISDNEntry 4 } usTermIsdnStatusB2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal B2 status. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.5" ::= { usTermISDNEntry 5 } usTermDectTable OBJECT-TYPE SYNTAX SEQUENCE OF UsTermDectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of configured voip DECT user terminal. OID: 1.3.6.1.4.1.7745.5.4.2.3" ::= { userTerminal 3 } usTermDectEntry OBJECT-TYPE SYNTAX UsTermDectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OID: 1.3.6.1.4.1.7745.5.4.2.3.1" INDEX { usTermDectIndex } ::= { usTermDectTable 1 } UsTermDectEntry ::= SEQUENCE { usTermDectIndex INTEGER, usTermDectEnable INTEGER, usTermDectDescription DisplayString, usTermDectStatus DisplayString, usTermDectDspSlic DisplayString } usTermDectIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.1" ::= { usTermDectEntry 1 } usTermDectEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get this parameter to read user terminal enable configuration. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.2" ::= { usTermDectEntry 2 } usTermDectDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal description. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.3" ::= { usTermDectEntry 3 } usTermDectStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal status. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.4" ::= { usTermDectEntry 4 } usTermDectDspSlic OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read user terminal DSP Slic. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.5" ::= { usTermDectEntry 5 } voipMaxConnection OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Set this parameter to configure global voip max connections. OID: 1.3.6.1.4.1.7745.5.4.3" ::= { voip 3 } -- -- Traps v2c definitions -- genericTrap NOTIFICATION-TYPE OBJECTS { genericError } STATUS current DESCRIPTION "This trap is used to send generic string alarm messages to SNMP manager, when a particular condition occurs. OID: 1.3.6.1.4.1.7745.5.5.1" ::= { traps 1 } genericError OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Describe a generic error for generic trap. OID: 1.3.6.1.4.1.7745.5.5.2" ::= { traps 2 } interfaceUp NOTIFICATION-TYPE OBJECTS { ifDescr } STATUS current DESCRIPTION "This trap is sent when a physical interface go up. OID: 1.3.6.1.4.1.7745.5.5.3" ::= { traps 3 } interfaceDown NOTIFICATION-TYPE OBJECTS { ifDescr } STATUS current DESCRIPTION "This trap is sent when a physical interface go down. OID: 1.3.6.1.4.1.7745.5.5.4" ::= { traps 4 } trunkRegistered NOTIFICATION-TYPE OBJECTS { trunkName } STATUS current DESCRIPTION "This trap is sent when a voip SIP Trunk registered. OID: 1.3.6.1.4.1.7745.5.5.5" ::= { traps 5 } trunkUnregistered NOTIFICATION-TYPE OBJECTS { trunkName } STATUS current DESCRIPTION "This trap is sent when a voip SIP Trunk unregistered. OID: 1.3.6.1.4.1.7745.5.5.6" ::= { traps 6 } mgmtAccesses OBJECT IDENTIFIER ::= { traps 7 } -- Management Access Traps mgmtUser OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing user name. OID: 1.3.6.1.4.1.7745.5.5.7.1" ::= { mgmtAccesses 1 } mgmtPrivilege OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing user privilege. OID: 1.3.6.1.4.1.7745.5.5.7.2" ::= { mgmtAccesses 2 } mgmtTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing time and date of event. OID: 1.3.6.1.4.1.7745.5.5.7.3" ::= { mgmtAccesses 3 } mgmtType OBJECT-TYPE SYNTAX INTEGER { console(1), telnet(2), web(3), snmp(4), ssh(5), tr069(6), unknown(7) } ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing user access type. OID: 1.3.6.1.4.1.7745.5.5.7.4" ::= { mgmtAccesses 4 } mgmtAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing ip for remote access type. OID: 1.3.6.1.4.1.7745.5.5.7.5" ::= { mgmtAccesses 5 } mgmtLogin NOTIFICATION-TYPE OBJECTS { mgmtUser, mgmtPrivilege, mgmtTime, mgmtType, mgmtAddress } STATUS current DESCRIPTION "This trap is sent when a user login in the system console. OID: 1.3.6.1.4.1.7745.5.5.7.6" ::= { mgmtAccesses 6 } mgmtLogout NOTIFICATION-TYPE OBJECTS { mgmtUser, mgmtPrivilege, mgmtTime, mgmtType, mgmtAddress } STATUS current DESCRIPTION "This trap is sent when a user logout from the system console. OID: 1.3.6.1.4.1.7745.5.5.7.7" ::= { mgmtAccesses 7 } mgmtChange NOTIFICATION-TYPE OBJECTS { mgmtUser, mgmtTime, mgmtType, mgmtAddress } STATUS current DESCRIPTION "This trap is sent when a logged user change param in the system console. OID: 1.3.6.1.4.1.7745.5.5.7.8" ::= { mgmtAccesses 8 } ifcTable OBJECT-TYPE SYNTAX SEQUENCE OF IfcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a table showing the list of interface entries. The number of entries is given by the value of mib-2 ifNumber. The indexes for the rows are equivalent to mib-2 ifIndex. OID: 1.3.6.1.4.1.7745.5.6.1" ::= { ifc 1 } ifcEntry OBJECT-TYPE SYNTAX IfcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " OID: 1.3.6.1.4.1.7745.5.6.1.1" INDEX { ifIndex } ::= { ifcTable 1 } IfcEntry ::= SEQUENCE { ifcName DisplayString, ifcDescr DisplayString, ifcType IANAifType, ifcPhysAddress PhysAddress, ifcMtu INTEGER, ifcSpeed Gauge, ifcRxRate Counter, ifcTxRate Counter } ifcName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read interface name. OID: 1.3.6.1.4.1.7745.5.6.1.1.1" ::= { ifcEntry 1 } ifcDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read interface description. OID: 1.3.6.1.4.1.7745.5.6.1.1.2" ::= { ifcEntry 2 } ifcType OBJECT-TYPE SYNTAX IANAifType ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read interface type. The types refer to those assigned by the Internet Assigned Numbers Authority (IANA). OID: 1.3.6.1.4.1.7745.5.6.1.1.3" ::= { ifcEntry 3 } ifcPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read interface physical address (mac address). OID: 1.3.6.1.4.1.7745.5.6.1.1.4" ::= { ifcEntry 4 } ifcMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read interface MTU, the size of the largest datagram which can be sent/received on the interface, specified in octets. OID: 1.3.6.1.4.1.7745.5.6.1.1.5" ::= { ifcEntry 5 } ifcSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read interface speed, an estimate of the interface's current bandwidth in bits per second. OID: 1.3.6.1.4.1.7745.5.6.1.1.6" ::= { ifcEntry 6 } ifcRxRate OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the current and effective RX rate in bit per second. OID: 1.3.6.1.4.1.7745.5.6.1.1.7" ::= { ifcEntry 7 } ifcTxRate OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this parameter to read the current and effective TX rate in bit per second. OID: 1.3.6.1.4.1.7745.5.6.1.1.8" ::= { ifcEntry 8 } END