-- ======================================================================= -- File : osaTwap.mib -- Description : Private MIB for TWAMP (Two Way Active Measurments Protocol) -- By : Maoz -- Version : $Revision: 1.1.1.1 $ -- Date : $Date: 2021/02/07 -- ======================================================================= OSA-TWAMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI -- TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC VlanId FROM IEEE8021-CFM-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF advaMIB FROM ADVA-MIB; osaTwamp MODULE-IDENTITY LAST-UPDATED "202108150000Z" -- August 15, 2021 ORGANIZATION "ADVA AG Optical Networking" CONTACT-INFO "ADVA AG Optical Networking Justus-von-Liebig-Str. 7 12489 Berlin, Germany Support Europe: Phone: +49 89 89 0665 848 Fax: +49 89 89 0665 22848 e-mail: support@advaoptical.com Support USA: Phone: +1 201 995 0080 Fax: +1 201 995 0081 e-mail: support-usa@advaoptical.com Support Asia: Phone: +81 3 5408 5891 Fax: +81 3 5408 5899 e-mail: support-asia@advaoptical.com" DESCRIPTION "TWAMP ADVA Private MIB for XG150 family products." REVISION "202108150000Z" -- August 15, 2021 DESCRIPTION "Initial revision." ::= { advaMIB 8 } -- ************************************************************ -- MIB place Definition -- ************************************************************ osaTwampNotifications OBJECT IDENTIFIER ::= { osaTwamp 0 } osaTwampGlobals OBJECT IDENTIFIER ::= { osaTwamp 1 } osaTwampConformance OBJECT IDENTIFIER ::= { osaTwamp 100 } osaTwampMIBCompliances OBJECT IDENTIFIER ::= { osaTwampConformance 1 } osaTwampMIBGroups OBJECT IDENTIFIER ::= { osaTwampConformance 2 } -- ************************************************************ -- Textual convention -- ************************************************************ -- ************************************************************ -- osaTwampGlobals -- ************************************************************ osaTwampResponderIgnoreEs OBJECT-TYPE SYNTAX INTEGER { ignore (1), notIgnore (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "According to RFC5357 Error estimate multiplier field MUST NOT be set to zero. If multiplier is zero the packet considered corrupt and should be discarded. For backward compatiblity and in order to support senders who can not support this requirements `ignore` option exists." DEFVAL { ignore } ::= { osaTwampGlobals 1 } -- ************************************************************ -- The osaTwampResponderTable Table -- ************************************************************ osaTwampResponderTable OBJECT-TYPE SYNTAX SEQUENCE OF OsaTwampResponderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains TWAMP Responders." ::= { osaTwamp 2 } osaTwampResponderEntry OBJECT-TYPE SYNTAX OsaTwampResponderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains an entry of the table." INDEX { osaTwampResponderIndex } ::= { osaTwampResponderTable 1 } OsaTwampResponderEntry ::= SEQUENCE { osaTwampResponderIndex Integer32, osaTwampResponderAlias DisplayString, osaTwampResponderControlMode INTEGER, osaTwampResponderIdleTimeout Unsigned32, osaTwampResponderAgingTimeout Unsigned32, osaTwampResponderVlanTag VlanId, osaTwampResponderSourceIpAddress DisplayString, osaTwampResponderRemoteClientIpAddress DisplayString, osaTwampResponderSourceUdpPort Unsigned32, osaTwampResponderRemoteClientUdpPort Unsigned32, osaTwampResponderSequenceAction INTEGER, osaTwampResponderState INTEGER, osaTwampResponderRowStatus RowStatus } osaTwampResponderIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index used to uniquely identify a TWAMP Responder." ::= { osaTwampResponderEntry 1 } osaTwampResponderAlias OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-create STATUS current DESCRIPTION "An alias associated with the TWAMP Responder." ::= { osaTwampResponderEntry 2 } osaTwampResponderControlMode OBJECT-TYPE SYNTAX INTEGER { controlDisabled (1), controlEnabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Responder control mode. When ControlMode is set to ControlDisabled - TWAMP Light Mode is used." DEFVAL { controlDisabled } ::= { osaTwampResponderEntry 3 } osaTwampResponderIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "When a TWAMP Test packet Is not received for this timeout period the TWAMP Session will go to IDLE state where Aging timer is started. This time is specified in seconds." DEFVAL { 5 } ::= { osaTwampResponderEntry 4 } osaTwampResponderAgingTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..9000) MAX-ACCESS read-create STATUS current DESCRIPTION "After a Session goes into IDLE state this timer with this timeout is started and on expiry the Session will terminate. This time is specified in seconds." DEFVAL { 900 } ::= { osaTwampResponderEntry 5 } osaTwampResponderVlanTag OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This is the outer VLAN ID of the received TWAMP test packets." ::= { osaTwampResponderEntry 6 } osaTwampResponderSourceIpAddress OBJECT-TYPE SYNTAX DisplayString(SIZE (8..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "IPv4/IPv6 Address of the local Responder interface." ::= { osaTwampResponderEntry 7 } osaTwampResponderRemoteClientIpAddress OBJECT-TYPE SYNTAX DisplayString(SIZE (8..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "IPv4/IPv6 Address of the remote client sender." ::= { osaTwampResponderEntry 8 } osaTwampResponderSourceUdpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the UDP Port of the local Responder." DEFVAL { 862 } ::= { osaTwampResponderEntry 9 } osaTwampResponderRemoteClientUdpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the UDP Port of the remote client. This UDP port is used by the TWAMP sender as the source udp port" ::= { osaTwampResponderEntry 10 } osaTwampResponderSequenceAction OBJECT-TYPE SYNTAX INTEGER { noAction (1), clearSequenceNumber (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sequence number action clearSequenceNumber will reset the reflector sequence numbering." ::= { osaTwampResponderEntry 11 } osaTwampResponderState OBJECT-TYPE SYNTAX INTEGER { init (1), testReady (2), waitingForTransitTimeout (3), end (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state describing the reflector status" ::= { osaTwampResponderEntry 12 } osaTwampResponderRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { osaTwampResponderEntry 13 } -- ************************************************************ -- The osaTwampResponderSessionTable Table -- ************************************************************ osaTwampResponderSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF OsaTwampResponderSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains TWAMP dynamic sessions related to specific responder." ::= { osaTwamp 3 } osaTwampResponderSessionEntry OBJECT-TYPE SYNTAX OsaTwampResponderSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains an entry of the table." INDEX { osaTwampResponderServerIndex, osaTwampResponderSessionIndex } ::= { osaTwampResponderSessionTable 1 } OsaTwampResponderSessionEntry ::= SEQUENCE { osaTwampResponderServerIndex Integer32, osaTwampResponderSessionIndex Integer32, osaTwampResponderSessionIdleTimeout Unsigned32, osaTwampResponderSessionAgingTimeout Unsigned32, osaTwampResponderSessionVlanTag VlanId, osaTwampResponderSessionSourceIpAddress DisplayString, osaTwampResponderSessionRemoteClientIpAddress DisplayString, osaTwampResponderSessionSourceUdpPort Unsigned32, osaTwampResponderSessionRemoteClientUdpPort Unsigned32, osaTwampResponderSessionSequenceNumber Unsigned32, osaTwampResponderSessionState INTEGER } osaTwampResponderServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index used to uniquely identify a TWAMP Responder." ::= { osaTwampResponderSessionEntry 1 } osaTwampResponderSessionIndex OBJECT-TYPE SYNTAX Integer32 (1..500) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index used to uniquely identify a TWAMP session." ::= { osaTwampResponderSessionEntry 2 } osaTwampResponderSessionIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When a TWAMP Test packet Is not received for this timeout period the TWAMP Session will go to IDLE state where Aging timer is started. This time is specified in seconds." DEFVAL { 5 } ::= { osaTwampResponderSessionEntry 3 } osaTwampResponderSessionAgingTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "After a Session goes into IDLE state this timer with this timeout is started and on expiry the Session will terminate. This time is specified in seconds." DEFVAL { 900 } ::= { osaTwampResponderSessionEntry 4 } osaTwampResponderSessionVlanTag OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "This is the outer VLAN ID of the received TWAMP test packets." ::= { osaTwampResponderSessionEntry 5 } osaTwampResponderSessionSourceIpAddress OBJECT-TYPE SYNTAX DisplayString(SIZE (8..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4/IPv6 Address of the local Responder interface." ::= { osaTwampResponderSessionEntry 6 } osaTwampResponderSessionRemoteClientIpAddress OBJECT-TYPE SYNTAX DisplayString(SIZE (8..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4/IPv6 Address of the remote client sender." ::= { osaTwampResponderSessionEntry 7 } osaTwampResponderSessionSourceUdpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the UDP Port of the local Responder." DEFVAL { 862 } ::= { osaTwampResponderSessionEntry 8 } osaTwampResponderSessionRemoteClientUdpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the UDP Port of the remote client. This UDP port is used by the TWAMP sender as the source udp port" ::= { osaTwampResponderSessionEntry 9 } osaTwampResponderSessionSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sequence number is the sequence number of the test packet according to its transmit order." ::= { osaTwampResponderSessionEntry 10 } osaTwampResponderSessionState OBJECT-TYPE SYNTAX INTEGER { init (1), testInProgress (2), idle (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state describing the session status" ::= { osaTwampResponderSessionEntry 11 } -- ************************************************************ -- osaTwampNotifications (Traps) -- ************************************************************ osaTwampMaxSessionsExceeded NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification is generated when number of sessions exceeding the maximum number supported sessions." ::= { osaTwampNotifications 1 } -- ******************************************************************* -- Conformance Information -- ******************************************************************* osaTwampMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all the implementations." MODULE -- this module MANDATORY-GROUPS { osaTwampMandatoryGroup, osaTwampNotificationGroup } ::= { osaTwampMIBCompliances 1 } -- ................................................................... -- Conformance Groups -- ................................................................... osaTwampMandatoryGroup OBJECT-GROUP OBJECTS { osaTwampResponderIgnoreEs, osaTwampResponderAlias, osaTwampResponderControlMode, osaTwampResponderIdleTimeout, osaTwampResponderAgingTimeout, osaTwampResponderVlanTag, osaTwampResponderSourceIpAddress, osaTwampResponderRemoteClientIpAddress, osaTwampResponderSourceUdpPort, osaTwampResponderRemoteClientUdpPort, osaTwampResponderSequenceAction, osaTwampResponderState, osaTwampResponderRowStatus, osaTwampResponderSessionIdleTimeout, osaTwampResponderSessionAgingTimeout, osaTwampResponderSessionVlanTag, osaTwampResponderSessionSourceIpAddress, osaTwampResponderSessionRemoteClientIpAddress, osaTwampResponderSessionSourceUdpPort, osaTwampResponderSessionRemoteClientUdpPort, osaTwampResponderSessionSequenceNumber, osaTwampResponderSessionState } STATUS current DESCRIPTION "." ::= { osaTwampMIBGroups 1 } -- ................................................................... -- NOTIFICATION-GROUP -- ................................................................... osaTwampNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { osaTwampMaxSessionsExceeded } STATUS current DESCRIPTION "The notification which are required to be supported by implementations of this MIB. " ::= { osaTwampMIBGroups 2 } END