FspR7-SPEQ-MIB DEFINITIONS ::= BEGIN

IMPORTS
    DisplayString,
    TestAndIncr,
    TimeStamp,
    RowStatus,
    DateAndTime,
    TruthValue,
    TEXTUAL-CONVENTION
                                        FROM  SNMPv2-TC
    MODULE-COMPLIANCE,
    NOTIFICATION-GROUP,
    OBJECT-GROUP
                                        FROM  SNMPv2-CONF
    Counter32,
    MODULE-IDENTITY,
    NOTIFICATION-TYPE,
    OBJECT-TYPE,
    OBJECT-IDENTITY,
    TimeTicks,
    mib-2,
    snmpModules,
    enterprises,
    Unsigned32,
    Integer32,
    IpAddress
                                        FROM  SNMPv2-SMI
    SnmpAdminString
                                        FROM  SNMP-FRAMEWORK-MIB
    fspR7,
    EntityClass,
    EntityIndex,
    TrapAlarmSeverity,
    ServiceImpairment,
    neEventLogTimeStamp,
    neEventLogIdentityTranslation
                                        FROM  ADVA-MIB
    FspR7AdminState,
    FspR7AdminStateCaps,
    FspR7EntitySecondaryStates,
    FspR7Integer32Caps,
    FspR7OperState
                                        FROM  FspR7-MIB;
    

speqMIB MODULE-IDENTITY

    LAST-UPDATED "201008310000Z"

    ORGANIZATION "ADVA AG Optical Networking"

    CONTACT-INFO "
            ADVA AG Optical Networking
            Justus-von-Liebig-Str. 7
            12489 Berlin, Germany

            Support Europe:
            Phone:  +49 89 89 0665 848
            Fax:    +49 89 89 0665 22848
            e-mail: support@advaoptical.com

            Support USA:
            Phone:  +1 201 995 0080
            Fax:    +1 201 995 0081
            e-mail: support-usa@advaoptical.com

            Support Asia:
            Phone:  +81 3 5408 5891
            Fax:    +81 3 5408 5899
            e-mail: support-asia@advaoptical.com
          "

    DESCRIPTION   "The Auto SPAN Equalization MIB."

    REVISION      "201010290000Z"
    DESCRIPTION   "FSP3000 F7 Release 10.2.1 MIB."

    REVISION      "201008310000Z"
    DESCRIPTION   "FSP3000 F7 Release 10.1.1 MIB."
    ::= { fspR7 4 }


speqEntityMIB
    OBJECT IDENTIFIER ::= { speqMIB 10 }

speqConfigurationMIB
    OBJECT IDENTIFIER ::= { speqMIB 12 }

speqStatusMIB
    OBJECT IDENTIFIER ::= { speqMIB 13 }

speqAlarms
    OBJECT IDENTIFIER ::= { speqMIB 14 }

speqTraps
    OBJECT IDENTIFIER ::= { speqAlarms 1 }

speqTrapsPrefix
    OBJECT IDENTIFIER ::= { speqTraps 0 }

speqConditions
    OBJECT IDENTIFIER ::= { speqAlarms 2 }

FspR7SpeqConfig ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "Auto Span Equalization Configuration" 
  SYNTAX        INTEGER                {
                  undefined(0),
                  none(1),
                  disable(2),
                  enableGainAdopt(3),  --SPEQ is enabled with the EDFA’s Gain adoption capability. SPEQ is adopting the current EDFA's GAIN for its gain calculation.
                  enableNoGainAdopt(4)  --SPEQ is enabled, it will use the SPEQ calculated Gain to set EDFA's GAIN
                }

FspR7SpeqDisableEnable ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "SPEQ Dynamic Compensation for span optical power variations." 
  SYNTAX        INTEGER                {
                  undefined(0),
                  enable(1),
                  disable(2)
                }

FspR7SpeqFarEndConfig ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "Indicating Far-End Auto Span Equalization Configuration." 
  SYNTAX        INTEGER                {
                  undefined(0),
                  unknown(1),
                  enable(2),
                  disable(3)
                }

FspR7SpeqOperate ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "When Per-Channel Power (PPC) changes without an SPEQ trigger condition; users could use this command to invoke SPEQ Gain recalculation/setting on the associated EDFA. (SPEQ Gain recalculation shall inherit the current value of the GainCal.) This user operated action could be service effecting. Therefore, users must be warned when operating this command; only upon user acceptance, software shall proceed with the new Gain recalculation and setting." 
  SYNTAX        INTEGER                {
                  undefined(0),
                  rls(1),
                  opr(2)
                }

FspR7SpeqOperateCaps ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "When Per-Channel Power (PPC) changes without an SPEQ trigger condition; users could use this command to invoke SPEQ Gain recalculation/setting on the associated EDFA. (SPEQ Gain recalculation shall inherit the current value of the GainCal.) This user operated action could be service effecting. Therefore, users must be warned when operating this command; only upon user acceptance, software shall proceed with the new Gain recalculation and setting." 
  SYNTAX        BITS
                {
                  capUndefined(0),
                  capRls(1),
                  capOpr(2)
                }

FspR7SpeqQualify ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "Determines if the qualified EDFA has been configured as Per-Amp, Booster-Amp, Line-Amp. Qualification process requires valid fiber-map." 
  SYNTAX        INTEGER                {
                  undefined(0),
                  preAmp(1),  --"PREAMP" means the EDFA has been qualified as "PREAMP"; therefore, Auto Span Equalization entity relevant to Pre-Amp shall be auto created.
                  boosterAmp(2),  --"BOOSTERAMP" means the EDFA has been qualified as Booster-Amp; therefore, Auto Span Equalization entity relevant to Booster-Amp shall be auto created.
                  lineAmp(3)  --"LINEAMP" means the EDFA has been qualified as Line-Amp; therefore, Auto Span Equalization entity relevant to Line-Amp shall be auto created. 
                }

FspR7SpeqOptLineService ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "This parameter provides optical channel service types that are being transported to/from an optical line. See related generic group or YP for the specific usage and/or explanation." 
  SYNTAX        INTEGER                {
                  undefined(0),
                  addDrop(1),  --An Optical Line that only transports add/drop optical channel services. 
                  passThrough(2),  --An Optical Line that only transports pass-through optical channel services.
                  hybrid(3)  --An Optical Lines that transports both add/drop and pass-through optical channel services.
                }

FspR7SpeqPpcLimit ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "Per-channel optical power limit value for supporting the maximum channel operation of a given optical link. PPC-LIMIT for an optical link with the 40 or the 80 max channel operations would be 4dBm or 1dBm respectively. 
         Example: assuming a user has installed an EFDA with Output Power of 20 interfacing an optical link with the max channel operation/capacity of 40. Therefore, PPC-LIMIT (the optimum power per-channel setting) for this link is 4dBm (PT=10log(n)+PPC; where PT=Total Output Power of the EDFA=20dB, n=max channel operation=40, PPC=PPC-LIMIT).
         
        " 
  SYNTAX        INTEGER                {
                  undefined(0),
                  four(1),
                  one(2),
                  seven(3)
                }

FspR7SpeqStatus ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "Auto Span Equalization Status" 
  SYNTAX        INTEGER                {
                  undefined(0),
                  none(1),
                  inProgress(2),
                  lockedOut(3)
                }

FspR7SpeqStandingConditionTypes ::= TEXTUAL-CONVENTION
  STATUS        current
  DESCRIPTION
         "" 
  SYNTAX        INTEGER
                {
                  undefined(0),
                  oosDisabledSpeq(120000),
                  oosMaintenanceSpeq(120002),
                  messageLossSpeq(120004),
                  oscFiberMissingSpeq(120005),
                  optLowSpeq(120006),
                  ppcOutOfRangeSpeq(120007),
                  gainTooHighSpeq(120008),
                  gainTooLowSpeq(120009),
                  gainAdoptFailedSpeq(120010)
                }

speqEntityTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqEntityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Table for SPEQ existing addresses. Entities in this table are either
         provisioned or not. Containers are always present in the table as long as their
         supporting entity is provisioned."
    ::=  { speqEntityMIB 1 }

speqEntityEntry OBJECT-TYPE
    SYNTAX      SpeqEntityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry for SPEQ existing addresses."
    INDEX       {
                  speqEntityIndex
                }
    ::=  { speqEntityTable 1 }

SpeqEntityEntry ::=  SEQUENCE
  { speqEntityIndex EntityIndex,
    speqEntityContainedIn EntityIndex,
    speqEntityClassInstanceNumber Integer32,
    speqEntityIndexAid SnmpAdminString }

speqEntityIndex OBJECT-TYPE
    SYNTAX      EntityIndex
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION   "Existing adress index"
    ::=  { speqEntityEntry 1 }

speqEntityContainedIn OBJECT-TYPE
    SYNTAX      EntityIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Contained in" 
    ::=  { speqEntityEntry 2 }

speqEntityClassInstanceNumber OBJECT-TYPE
    SYNTAX      Integer32 (1..2000 | -2147483648)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The class instance number of this entity within the module(card)" 
    ::=  { speqEntityEntry 3 }

speqEntityIndexAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Name" 
    ::=  { speqEntityEntry 4 }

speqContainsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqContainsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Table for all existing addresses. Gives the index of the subtending
         entity in the containment."
    ::=  { speqEntityMIB 2 }

speqContainsEntry OBJECT-TYPE
    SYNTAX      SpeqContainsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    INDEX       {
                  speqEntityIndex,
                  speqContainsIndex
                }
    ::=  { speqContainsTable 1 }

SpeqContainsEntry ::=  SEQUENCE
  { speqContainsIndex EntityIndex }

speqContainsIndex OBJECT-TYPE
    SYNTAX      EntityIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "" 
    ::=  { speqContainsEntry 1 }

speqConfiguration OBJECT-TYPE
    SYNTAX      FspR7SpeqConfig
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigurationMIB 1 }

speqDynamicComp OBJECT-TYPE
    SYNTAX      FspR7SpeqDisableEnable
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigurationMIB 2 }

speqConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigurationMIB 10 }

speqConfigEntry OBJECT-TYPE
    SYNTAX      SpeqConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    INDEX       {
                  speqEntityIndex
                }
    ::=  { speqConfigTable 1 }

SpeqConfigEntry ::=  SEQUENCE
  { speqConfigAdmin FspR7AdminState,
    speqConfigOpticalSetpoint Integer32,
    speqConfigPerChannelPower Integer32,
    speqConfigGainCal Integer32,
    speqConfigOperate FspR7SpeqOperate }

speqConfigAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigEntry 1 }

speqConfigOpticalSetpoint OBJECT-TYPE
    SYNTAX      Integer32 (-250..50 | -2147483648) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigEntry 2 }

speqConfigPerChannelPower OBJECT-TYPE
    SYNTAX      Integer32 (-20..80 | -2147483648) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigEntry 3 }

speqConfigGainCal OBJECT-TYPE
    SYNTAX      Integer32 (-50..50 | -2147483648) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigEntry 4 }

speqConfigOperate OBJECT-TYPE
    SYNTAX      FspR7SpeqOperate
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigEntry 5 }

speqConfigCapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqConfigCapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigurationMIB 11 }

speqConfigCapEntry OBJECT-TYPE
    SYNTAX      SpeqConfigCapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    INDEX       {
                  speqEntityIndex
                }
    ::=  { speqConfigCapTable 1 }

SpeqConfigCapEntry ::=  SEQUENCE
  { speqConfigCapAdmin FspR7AdminStateCaps,
    speqConfigCapOpticalSetpoint FspR7Integer32Caps,
    speqConfigCapPerChannelPower FspR7Integer32Caps,
    speqConfigCapGainCal FspR7Integer32Caps }

speqConfigCapAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminStateCaps
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigCapEntry 1 }

speqConfigCapOpticalSetpoint OBJECT-TYPE
    SYNTAX      FspR7Integer32Caps
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigCapEntry 2 }

speqConfigCapPerChannelPower OBJECT-TYPE
    SYNTAX      FspR7Integer32Caps
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigCapEntry 3 }

speqConfigCapGainCal OBJECT-TYPE
    SYNTAX      FspR7Integer32Caps
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConfigCapEntry 4 }

speqStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusMIB 10 }

speqStatusEntry OBJECT-TYPE
    SYNTAX      SpeqStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    INDEX       {
                  speqEntityIndex
                }
    ::=  { speqStatusTable 1 }

SpeqStatusEntry ::=  SEQUENCE
  { speqStatusOper FspR7OperState,
    speqStatusSecondaryStates FspR7EntitySecondaryStates,
    speqStatusQualify FspR7SpeqQualify,
    speqStatusOpticalLineAid EntityIndex,
    speqStatusOscAid EntityIndex,
    speqStatusOpticalLineServiceType FspR7SpeqOptLineService,
    speqStatusPerChannelPowerLimit FspR7SpeqPpcLimit,
    speqStatusCalculatedGain Unsigned32,
    speqStatusStatus FspR7SpeqStatus,
    speqStatusFarEndConfig FspR7SpeqFarEndConfig,
    speqStatusFarEndStatus FspR7SpeqStatus,
    speqStatusFarEndPpc Integer32,
    speqStatusFarEndOpt Integer32,
    speqStatusFarEndOpr Integer32,
    speqStatusNearEndOpt Integer32,
    speqStatusNearEndOpr Integer32 }

speqStatusOper OBJECT-TYPE
    SYNTAX      FspR7OperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 1 }

speqStatusSecondaryStates OBJECT-TYPE
    SYNTAX      FspR7EntitySecondaryStates
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 2 }

speqStatusQualify OBJECT-TYPE
    SYNTAX      FspR7SpeqQualify
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 3 }

speqStatusOpticalLineAid OBJECT-TYPE
    SYNTAX      EntityIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 4 }

speqStatusOscAid OBJECT-TYPE
    SYNTAX      EntityIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 5 }

speqStatusOpticalLineServiceType OBJECT-TYPE
    SYNTAX      FspR7SpeqOptLineService
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 6 }

speqStatusPerChannelPowerLimit OBJECT-TYPE
    SYNTAX      FspR7SpeqPpcLimit
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 7 }

speqStatusCalculatedGain OBJECT-TYPE
    SYNTAX      Unsigned32 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 8 }

speqStatusStatus OBJECT-TYPE
    SYNTAX      FspR7SpeqStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 9 }

speqStatusFarEndConfig OBJECT-TYPE
    SYNTAX      FspR7SpeqFarEndConfig
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 10 }

speqStatusFarEndStatus OBJECT-TYPE
    SYNTAX      FspR7SpeqStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 11 }

speqStatusFarEndPpc OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 12 }

speqStatusFarEndOpt OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 13 }

speqStatusFarEndOpr OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 14 }

speqStatusNearEndOpt OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 15 }

speqStatusNearEndOpr OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqStatusEntry 16 }


alarmOosDisabledSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Non-Specific Disablement of Management Access"
    ::=  { speqTrapsPrefix 120000 }


alarmOosMaintenanceSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Alarms are logged but not notified, service affecting changes and operations are permitted"
    ::=  { speqTrapsPrefix 120002 }


alarmMessageLossSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "SPEQ Message Loss"
    ::=  { speqTrapsPrefix 120004 }


alarmOscFiberMissingSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "SPEQ not functioning, OSC Fiber(s) missing"
    ::=  { speqTrapsPrefix 120005 }


alarmOptLowSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Alarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm."
    ::=  { speqTrapsPrefix 120006 }


alarmPpcOutOfRangeSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Adopted PPC exceeded the PPC range"
    ::=  { speqTrapsPrefix 120007 }


alarmGainTooHighSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Auto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type."
    ::=  { speqTrapsPrefix 120008 }


alarmGainTooLowSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Auto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type."
    ::=  { speqTrapsPrefix 120009 }


alarmGainAdoptFailedSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqCurrentConditionSeverity,speqCurrentConditionAffect,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Alarm is raised when SPEQ Gain Adoption process fails."
    ::=  { speqTrapsPrefix 120010 }



speqCreation NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,
                  neEventLogTimeStamp,
                  neEventLogIdentityTranslation
                } 
    STATUS      current
    DESCRIPTION   "This trap is sent every time an entity is created. No containers
         or other sub-entities in the chassis are reported created by this trap,
         the NMS must read these data."
    ::=  { speqTrapsPrefix 124001 }

speqDeletion NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,
                  neEventLogTimeStamp,
                  neEventLogIdentityTranslation
                } 
    STATUS      current
    DESCRIPTION   "This trap is sent every time an entity is deleted. The
         sub-entities (containers, modules, etc.) are not reported deleted.
        "
    ::=  { speqTrapsPrefix 124002 }

speqStateChange NOTIFICATION-TYPE 
    OBJECTS     { neEventLogTimeStamp,
                  neEventLogIdentityTranslation
                } 
    STATUS      current
    DESCRIPTION   "This trap is sent when an entity state is changed."
    ::=  { speqTrapsPrefix 124003 }

speqObjectChange NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,
                  neEventLogTimeStamp,
                  neEventLogIdentityTranslation
                } 
    STATUS      current
    DESCRIPTION   "This trap is sent when some object is changed."
    ::=  { speqTrapsPrefix 124004 }

transientGainAutoAdjustSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Span Equalization Gain auto adjustment is triggered by monitoring LOS clear condition."
    ::=  { speqTrapsPrefix 126000 }


transientGainNoAdjustSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Span Equalization Gain Not Adjusted."
    ::=  { speqTrapsPrefix 126001 }


transientGainAdjustFailedSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Span Equalization Gain Adjustment Failed."
    ::=  { speqTrapsPrefix 126002 }


transientWaitSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Auto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization."
    ::=  { speqTrapsPrefix 126003 }


transientDenySpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Span Equalization request denied; operation could not be performed by the SPEQ-Server"
    ::=  { speqTrapsPrefix 126004 }


transientPpcAdoptSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "PPC is auto calculated based on the adopted Gain for Brown-Field installations."
    ::=  { speqTrapsPrefix 126005 }


transientPpcLimitExceededSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Provisioned per-channel power level exceeded the allowable limit"
    ::=  { speqTrapsPrefix 126006 }


transientGainDynamicAdjustSpeq NOTIFICATION-TYPE 
    OBJECTS     { speqEntityIndex,neEventLogTimeStamp,neEventLogIdentityTranslation } 
    STATUS      current
    DESCRIPTION   "Span Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA."
    ::=  { speqTrapsPrefix 126007 }


speqConditionSeverityTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqConditionSeverityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "This table contains a severity value for each defined standing condition reported by an entity in the NE."
    ::=  { speqConditions 1 }

speqConditionSeverityEntry OBJECT-TYPE
    SYNTAX      SpeqConditionSeverityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Each entry in the table represents the severity assigned to a condition.'"
    INDEX       {
                  speqEntityIndex,
                  speqConditionSeverityType
                }
    ::=  { speqConditionSeverityTable 1 }

SpeqConditionSeverityEntry ::=  SEQUENCE
  { speqConditionSeverityType FspR7SpeqStandingConditionTypes,
    speqConditionSeverityValue TrapAlarmSeverity }

speqConditionSeverityType OBJECT-TYPE
    SYNTAX      FspR7SpeqStandingConditionTypes
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "This object identifies the type of alarm."
    ::=  { speqConditionSeverityEntry 1 }

speqConditionSeverityValue OBJECT-TYPE
    SYNTAX      TrapAlarmSeverity
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION   "This object identifies the severity assigned to this alarm."
    ::=  { speqConditionSeverityEntry 2 }

speqCurrentConditionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SpeqCurrentConditionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    ::=  { speqConditions 2 }

speqCurrentConditionEntry OBJECT-TYPE
    SYNTAX      SpeqCurrentConditionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    INDEX       {
                  speqEntityIndex,
                  speqCurrentConditionType
                }
    ::=  { speqCurrentConditionTable 1 }

SpeqCurrentConditionEntry ::=  SEQUENCE
  { speqCurrentConditionType FspR7SpeqStandingConditionTypes,
    speqCurrentConditionSeverity TrapAlarmSeverity,
    speqCurrentConditionAffect ServiceImpairment,
    speqCurrentConditionTimeStamp DateAndTime }

speqCurrentConditionType OBJECT-TYPE
    SYNTAX      FspR7SpeqStandingConditionTypes
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "List of all interface conditions"
    ::=  { speqCurrentConditionEntry 1 }

speqCurrentConditionSeverity OBJECT-TYPE
    SYNTAX      TrapAlarmSeverity
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "This object identifies the current severity of alarm."
    ::=  { speqCurrentConditionEntry 2 }

speqCurrentConditionAffect OBJECT-TYPE
    SYNTAX      ServiceImpairment
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "This object indicates the service impairment affect of the alarm."
    ::=  { speqCurrentConditionEntry 3 }

speqCurrentConditionTimeStamp OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Timestamp"
    ::=  { speqCurrentConditionEntry 4 }


END