AOS-CORE-FACILITY-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
             FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter64, TimeTicks
             FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
             FROM SNMPv2-TC
    ifIndex
             FROM IF-MIB
    PmSuspectReasonType
             FROM AOS-COMMON-PM-MIB
    aosCommon
             FROM ADVA-MIB;

aosCoreFacilityMIB MODULE-IDENTITY
    LAST-UPDATED    "201606050000Z"
    ORGANIZATION    "ADVA Optical Networking"
    CONTACT-INFO
                    "ADVA Optical Networking, Inc."
    DESCRIPTION     "This module defines the Core Facility MIB definitions
                     used by the AOS based product lines.
                     Copyright (C) ADVA Optical Networking."
    REVISION        "201606050000Z"
    DESCRIPTION     "Initial release."
    ::= {aosCommon 3}

--
-- OID definitions
--
aosCoreFacilityObjects          OBJECT IDENTIFIER ::= {aosCoreFacilityMIB 1}
aosCoreFacilityStatsObjects     OBJECT IDENTIFIER ::= {aosCoreFacilityMIB 2}
aosCoreFacilityConformance      OBJECT IDENTIFIER ::= {aosCoreFacilityMIB 3}

--
-- Textual conventions.
--

--
-- Scalar definitions.
--

--
-- Facility Optical Statistics tables.
--

--
-- Current values.
--
aosCoreFacCurrOpticalPowerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF AosCoreFacCurrOpticalPowerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of entries corresponding to the optical PM points
             for the facilities that support them."
    ::= { aosCoreFacilityStatsObjects 1 }

aosCoreFacCurrOpticalPowerEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacCurrOpticalPowerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a particular
             interface."
    INDEX { ifIndex }
    ::= { aosCoreFacCurrOpticalPowerTable 1 }

AosCoreFacCurrOpticalPowerEntry ::= SEQUENCE {
    aosCoreFacCurrOpticalPowerRx  Integer32,
    aosCoreFacCurrOpticalPowerTx  Integer32,
    aosCoreFacCurrOpticalPowerSuspectReason     PmSuspectReasonType
}

aosCoreFacCurrOpticalPowerRx OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The optical power monitored at the input."
     ::= { aosCoreFacCurrOpticalPowerEntry 1 }

aosCoreFacCurrOpticalPowerTx OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The optical power monitored at the output."
     ::= { aosCoreFacCurrOpticalPowerEntry 2 }

aosCoreFacCurrOpticalPowerSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacCurrOpticalPowerEntry 3 }


aosCoreFacHist15MinOpticalPowerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF AosCoreFacHist15MinOpticalPowerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of entries corresponding to the historical 15-minute
             values of the optical power monitoring points."
    ::= { aosCoreFacilityStatsObjects 2 }

aosCoreFacHist15MinOpticalPowerEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacHist15MinOpticalPowerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a particular
             interface."
    INDEX { ifIndex, aosCoreFacHist15MinOpticalPowerSample }
    ::= { aosCoreFacHist15MinOpticalPowerTable 1 }

AosCoreFacHist15MinOpticalPowerEntry ::= SEQUENCE {
    aosCoreFacHist15MinOpticalPowerSample     Integer32,
    aosCoreFacHist15MinOpticalPowerSampleTime TimeTicks,
    aosCoreFacHist15MinOpticalPowerRxLow      Integer32,
    aosCoreFacHist15MinOpticalPowerRxMed      Integer32,
    aosCoreFacHist15MinOpticalPowerRxHi       Integer32,
    aosCoreFacHist15MinOpticalPowerTxLow      Integer32,
    aosCoreFacHist15MinOpticalPowerTxMed      Integer32,
    aosCoreFacHist15MinOpticalPowerTxHi       Integer32,
    aosCoreFacHist15MinOpticalPowerSuspectReason     PmSuspectReasonType
}

aosCoreFacHist15MinOpticalPowerSample OBJECT-TYPE
    SYNTAX     Integer32 (1..99)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Sample number for given time period."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 1 }

aosCoreFacHist15MinOpticalPowerSampleTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Time ticks since the sample was collected."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 2 }

aosCoreFacHist15MinOpticalPowerRxLow OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The low optical power monitored at the input, 15-minute sample."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 3 }

aosCoreFacHist15MinOpticalPowerRxMed OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The medium optical power monitored at the input, 15-minute sample."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 4 }

aosCoreFacHist15MinOpticalPowerRxHi OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The high optical power monitored at the input, 15-minute sample."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 5 }

aosCoreFacHist15MinOpticalPowerTxLow OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The low optical power monitored at the output, 15-minute sample."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 6 }

aosCoreFacHist15MinOpticalPowerTxMed OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The medium optical power monitored at the output, 15-minute sample."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 7 }

aosCoreFacHist15MinOpticalPowerTxHi OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The high optical power monitored at the output, 15-minute sample."
     ::= { aosCoreFacHist15MinOpticalPowerEntry 8 }

aosCoreFacHist15MinOpticalPowerSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacHist15MinOpticalPowerEntry 9 }


aosCoreFacHist1DayOpticalPowerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF AosCoreFacHist1DayOpticalPowerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of entries corresponding to the historical 1-day
             values of the optical power monitoring points."
    ::= { aosCoreFacilityStatsObjects 3 }

aosCoreFacHist1DayOpticalPowerEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacHist1DayOpticalPowerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a particular
             interface."
    INDEX { ifIndex, aosCoreFacHist1DayOpticalPowerSample }
    ::= { aosCoreFacHist1DayOpticalPowerTable 1 }

AosCoreFacHist1DayOpticalPowerEntry ::= SEQUENCE {
    aosCoreFacHist1DayOpticalPowerSample     Integer32,
    aosCoreFacHist1DayOpticalPowerSampleTime TimeTicks,
    aosCoreFacHist1DayOpticalPowerRxLow      Integer32,
    aosCoreFacHist1DayOpticalPowerRxMed      Integer32,
    aosCoreFacHist1DayOpticalPowerRxHi       Integer32,
    aosCoreFacHist1DayOpticalPowerTxLow      Integer32,
    aosCoreFacHist1DayOpticalPowerTxMed      Integer32,
    aosCoreFacHist1DayOpticalPowerTxHi       Integer32,
    aosCoreFacHist1DayOpticalPowerSuspectReason     PmSuspectReasonType
}

aosCoreFacHist1DayOpticalPowerSample OBJECT-TYPE
    SYNTAX     Integer32 (1..31)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Sample number for given time period."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 1 }

aosCoreFacHist1DayOpticalPowerSampleTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Time ticks since the sample was collected."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 2 }

aosCoreFacHist1DayOpticalPowerRxLow OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The low optical power monitored at the input, 1-day sample."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 3 }

aosCoreFacHist1DayOpticalPowerRxMed OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The medium optical power monitored at the input, 1-day sample."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 4 }

aosCoreFacHist1DayOpticalPowerRxHi OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The high optical power monitored at the input, 1-day sample."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 5 }

aosCoreFacHist1DayOpticalPowerTxLow OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The low optical power monitored at the output, 1-day sample."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 6 }

aosCoreFacHist1DayOpticalPowerTxMed OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The medium optical power monitored at the output, 1-day sample."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 7 }

aosCoreFacHist1DayOpticalPowerTxHi OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The high optical power monitored at the output, 1-day sample."
     ::= { aosCoreFacHist1DayOpticalPowerEntry 8 }

aosCoreFacHist1DayOpticalPowerSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacHist1DayOpticalPowerEntry 9 }

aosCoreFacCurrFecTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AosCoreFacCurrFecEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to the current values of the
             forward error correction monitoring points."
    ::= { aosCoreFacilityStatsObjects 4 }

aosCoreFacCurrFecEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacCurrFecEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry of the aosCoreFacCurrFecTable."
    INDEX { ifIndex }
    ::= { aosCoreFacCurrFecTable 1 }

AosCoreFacCurrFecEntry ::= SEQUENCE {
    aosCoreFacCurrFecCorrectedErrors    Counter64,
    aosCoreFacCurrFecUncorrectedBlocks  Counter64,
    aosCoreFacCurrFecBitErrorRate       Counter64,
    aosCoreFacCurrFecSuspectReason     PmSuspectReasonType
}

aosCoreFacCurrFecCorrectedErrors OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Corrected errors by the FEC process."
     ::= { aosCoreFacCurrFecEntry 1 }

aosCoreFacCurrFecUncorrectedBlocks OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Uncorrected blocks by the FEC process."
     ::= { aosCoreFacCurrFecEntry 2 }

aosCoreFacCurrFecBitErrorRate OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "1e-18"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Bit error rate."
     ::= { aosCoreFacCurrFecEntry 3 }

aosCoreFacCurrFecSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacCurrFecEntry 4 }

aosCoreFacHist15MinFecTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AosCoreFacHist15MinFecEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to the historical 15-minute
             values of the forward error correction monitoring points."
    ::= { aosCoreFacilityStatsObjects 5 }

aosCoreFacHist15MinFecEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacHist15MinFecEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry of the aosCoreFacHist15MinFecTable."
    INDEX { ifIndex, aosCoreFacHist15MinFecSample }
    ::= { aosCoreFacHist15MinFecTable 1 }

AosCoreFacHist15MinFecEntry ::= SEQUENCE {
    aosCoreFacHist15MinFecSample             Integer32,
    aosCoreFacHist15MinFecSampleTime         TimeTicks,
    aosCoreFacHist15MinFecCorrectedErrors    Counter64,
    aosCoreFacHist15MinFecUncorrectedBlocks  Counter64,
    aosCoreFacHist15MinFecBitErrorRate       Counter64,
    aosCoreFacHist15MinFecSuspectReason     PmSuspectReasonType
}

aosCoreFacHist15MinFecSample OBJECT-TYPE
    SYNTAX     Integer32 (1..99)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Sample number for given time period."
     ::= { aosCoreFacHist15MinFecEntry 1 }

aosCoreFacHist15MinFecSampleTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Time since the sample was collected."
     ::= { aosCoreFacHist15MinFecEntry 2 }

aosCoreFacHist15MinFecCorrectedErrors OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Errors corrected by the FEC process within 15-minute period."
     ::= { aosCoreFacHist15MinFecEntry 3 }

aosCoreFacHist15MinFecUncorrectedBlocks OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Uncorrected blocks within 15-minute period."
     ::= { aosCoreFacHist15MinFecEntry 4 }

aosCoreFacHist15MinFecBitErrorRate OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Bit error rate within 15-minute period."
     ::= { aosCoreFacHist15MinFecEntry 5 }

aosCoreFacHist15MinFecSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacHist15MinFecEntry 6 }

aosCoreFacHist1DayFecTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AosCoreFacHist1DayFecEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to the historical 1-day
             values of the forward error correction monitoring points."
    ::= { aosCoreFacilityStatsObjects 6 }

aosCoreFacHist1DayFecEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacHist1DayFecEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry of the aosCoreFacHist1DayFecTable."
    INDEX { ifIndex, aosCoreFacHist1DayFecSample }
    ::= { aosCoreFacHist1DayFecTable 1 }

AosCoreFacHist1DayFecEntry ::= SEQUENCE {
    aosCoreFacHist1DayFecSample             Integer32,
    aosCoreFacHist1DayFecSampleTime         TimeTicks,
    aosCoreFacHist1DayFecCorrectedErrors    Counter64,
    aosCoreFacHist1DayFecUncorrectedBlocks  Counter64,
    aosCoreFacHist1DayFecBitErrorRate       Counter64,
    aosCoreFacHist1DayFecSuspectReason     PmSuspectReasonType
}

aosCoreFacHist1DayFecSample OBJECT-TYPE
    SYNTAX     Integer32 (1..31)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Sample number for given time period."
     ::= { aosCoreFacHist1DayFecEntry 1 }

aosCoreFacHist1DayFecSampleTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Time since the sample was collected."
     ::= { aosCoreFacHist1DayFecEntry 2 }

aosCoreFacHist1DayFecCorrectedErrors OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Errors corrected by the FEC process within 1-day period."
     ::= { aosCoreFacHist1DayFecEntry 3 }

aosCoreFacHist1DayFecUncorrectedBlocks OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Uncorrected blocks within 1-day period."
     ::= { aosCoreFacHist1DayFecEntry 4 }

aosCoreFacHist1DayFecBitErrorRate OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Bit error rate within 1-day period."
     ::= { aosCoreFacHist1DayFecEntry 5 }

aosCoreFacHist1DayFecSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacHist1DayFecEntry 6 }


aosCoreFacCurrSnrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AosCoreFacCurrSnrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to the current values of the
             Signal-To-Noise Ratio monitoring point."
    ::= { aosCoreFacilityStatsObjects 7 }

aosCoreFacCurrSnrEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacCurrSnrEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry of the aosCoreFacCurrSnrTable."
    INDEX { ifIndex }
    ::= { aosCoreFacCurrSnrTable 1 }

AosCoreFacCurrSnrEntry ::= SEQUENCE {
    aosCoreFacCurrSnrValue Counter64,
    aosCoreFacCurrSnrSuspectReason     PmSuspectReasonType
}

aosCoreFacCurrSnrValue OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Signal-To-Noise Ratio."
     ::= { aosCoreFacCurrSnrEntry 1 }

aosCoreFacCurrSnrSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacCurrSnrEntry 2 }

aosCoreFacHist15MinSnrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AosCoreFacHist15MinSnrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to the historical 15-minute
             values of the Signal-To-Noise Ratio monitoring point."
    ::= { aosCoreFacilityStatsObjects 8 }

aosCoreFacHist15MinSnrEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacHist15MinSnrEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry of the aosCoreFacHist15MinSnrTable."
    INDEX { ifIndex, aosCoreFacHist15MinSnrSample }
    ::= { aosCoreFacHist15MinSnrTable 1 }

AosCoreFacHist15MinSnrEntry ::= SEQUENCE {
    aosCoreFacHist15MinSnrSample       Integer32,
    aosCoreFacHist15MinSnrSampleTime   TimeTicks,
    aosCoreFacHist15MinSnrValueLow     Counter64,
    aosCoreFacHist15MinSnrValueMean    Counter64,
    aosCoreFacHist15MinSnrValueHigh    Counter64,
    aosCoreFacHist15MinSnrSuspectReason     PmSuspectReasonType
}

aosCoreFacHist15MinSnrSample OBJECT-TYPE
    SYNTAX     Integer32 (1..99)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Sample number for given time period."
     ::= { aosCoreFacHist15MinSnrEntry 1 }

aosCoreFacHist15MinSnrSampleTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Time since the sample was collected."
     ::= { aosCoreFacHist15MinSnrEntry 2 }

aosCoreFacHist15MinSnrValueLow OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Lowest Signal-To-Noise Ratio measured for 15-minute period."
     ::= { aosCoreFacHist15MinSnrEntry 3 }

aosCoreFacHist15MinSnrValueMean OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Mean Signal-To-Noise Ratio measured for 15-minute period."
     ::= { aosCoreFacHist15MinSnrEntry 4 }

aosCoreFacHist15MinSnrValueHigh OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Highest Signal-To-Noise Ratio measured for 15-minute period."
     ::= { aosCoreFacHist15MinSnrEntry 5 }

aosCoreFacHist15MinSnrSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacHist15MinSnrEntry 6 }

aosCoreFacHist1DaySnrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AosCoreFacHist1DaySnrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to the historical 1-day
             values of the Signal-To-Noise Ratio monitoring point."
    ::= { aosCoreFacilityStatsObjects 9 }

aosCoreFacHist1DaySnrEntry  OBJECT-TYPE
    SYNTAX     AosCoreFacHist1DaySnrEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry of the aosCoreFacHist1DaySnrTable."
    INDEX { ifIndex, aosCoreFacHist1DaySnrSample }
    ::= { aosCoreFacHist1DaySnrTable 1 }

AosCoreFacHist1DaySnrEntry ::= SEQUENCE {
    aosCoreFacHist1DaySnrSample     Integer32,
    aosCoreFacHist1DaySnrSampleTime TimeTicks,
    aosCoreFacHist1DaySnrValueLow   Counter64,
    aosCoreFacHist1DaySnrValueMean  Counter64,
    aosCoreFacHist1DaySnrValueHigh  Counter64,
    aosCoreFacHist1DaySnrSuspectReason     PmSuspectReasonType
}

aosCoreFacHist1DaySnrSample OBJECT-TYPE
    SYNTAX     Integer32 (1..31)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Sample number for given time period."
     ::= { aosCoreFacHist1DaySnrEntry 1 }

aosCoreFacHist1DaySnrSampleTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Time since the sample was collected."
     ::= { aosCoreFacHist1DaySnrEntry 2 }

aosCoreFacHist1DaySnrValueLow OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Lowest Signal-To-Noise Ratio measured for 1-day period."
     ::= { aosCoreFacHist1DaySnrEntry 3 }

aosCoreFacHist1DaySnrValueMean OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Mean Signal-To-Noise Ratio measured for 1-day period."
     ::= { aosCoreFacHist1DaySnrEntry 4 }

aosCoreFacHist1DaySnrValueHigh OBJECT-TYPE
    SYNTAX     Counter64
    UNITS      "10 dB"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "Highest Signal-To-Noise Ratio measured for 1-day period."
     ::= { aosCoreFacHist1DaySnrEntry 5 }

aosCoreFacHist1DaySnrSuspectReason OBJECT-TYPE
    SYNTAX      PmSuspectReasonType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { aosCoreFacHist1DaySnrEntry 6 }

--
-- Conformance
--
aosCoreFacilityCompliances      OBJECT IDENTIFIER ::= {aosCoreFacilityConformance 1}
aosCoreFacilityGroups           OBJECT IDENTIFIER ::= {aosCoreFacilityConformance 2}

aosCoreFacilityCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the Core
             Facility Services."
    MODULE  -- this module
        MANDATORY-GROUPS {
              aosCoreFacilityStatsObjectGroup
        }
    ::= { aosCoreFacilityCompliances 1 }

aosCoreFacilityStatsObjectGroup OBJECT-GROUP
    OBJECTS {
        aosCoreFacCurrOpticalPowerRx,
        aosCoreFacCurrOpticalPowerTx,
        aosCoreFacCurrOpticalPowerSuspectReason,

        aosCoreFacHist15MinOpticalPowerSample,
        aosCoreFacHist15MinOpticalPowerSampleTime,
        aosCoreFacHist15MinOpticalPowerRxLow,
        aosCoreFacHist15MinOpticalPowerRxMed,
        aosCoreFacHist15MinOpticalPowerRxHi,
        aosCoreFacHist15MinOpticalPowerTxLow,
        aosCoreFacHist15MinOpticalPowerTxMed,
        aosCoreFacHist15MinOpticalPowerTxHi,
        aosCoreFacHist15MinOpticalPowerSuspectReason,

        aosCoreFacHist1DayOpticalPowerSample,
        aosCoreFacHist1DayOpticalPowerSampleTime,
        aosCoreFacHist1DayOpticalPowerRxLow,
        aosCoreFacHist1DayOpticalPowerRxMed,
        aosCoreFacHist1DayOpticalPowerRxHi,
        aosCoreFacHist1DayOpticalPowerTxLow,
        aosCoreFacHist1DayOpticalPowerTxMed,
        aosCoreFacHist1DayOpticalPowerTxHi,
        aosCoreFacHist1DayOpticalPowerSuspectReason,

        aosCoreFacCurrFecCorrectedErrors,
        aosCoreFacCurrFecUncorrectedBlocks,
        aosCoreFacCurrFecBitErrorRate,
        aosCoreFacCurrFecSuspectReason,

        aosCoreFacHist15MinFecSample,
        aosCoreFacHist15MinFecSampleTime,
        aosCoreFacHist15MinFecCorrectedErrors,
        aosCoreFacHist15MinFecUncorrectedBlocks,
        aosCoreFacHist15MinFecBitErrorRate,
        aosCoreFacHist15MinFecSuspectReason,

        aosCoreFacHist1DayFecSample,
        aosCoreFacHist1DayFecSampleTime,
        aosCoreFacHist1DayFecCorrectedErrors,
        aosCoreFacHist1DayFecUncorrectedBlocks,
        aosCoreFacHist1DayFecBitErrorRate,
        aosCoreFacHist1DayFecSuspectReason,

        aosCoreFacCurrSnrValue,
        aosCoreFacCurrSnrSuspectReason,

        aosCoreFacHist15MinSnrSample,
        aosCoreFacHist15MinSnrSampleTime,
        aosCoreFacHist15MinSnrValueLow,
        aosCoreFacHist15MinSnrValueMean,
        aosCoreFacHist15MinSnrValueHigh,
        aosCoreFacHist15MinSnrSuspectReason,

        aosCoreFacHist1DaySnrSample,
        aosCoreFacHist1DaySnrSampleTime,
        aosCoreFacHist1DaySnrValueLow,
        aosCoreFacHist1DaySnrValueMean,
        aosCoreFacHist1DaySnrValueHigh,
        aosCoreFacHist1DaySnrSuspectReason
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects used to manage the Core Facility
             Stats Services."
    ::= { aosCoreFacilityGroups 1 }

END