GEN-RADIUS-AUTH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, Gauge32, Unsigned32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC InterfaceIndex, ifIndex FROM IF-MIB adGenSlotInfoIndex FROM ADTRAN-GENSLOT-MIB adGenRadiusAuth, adGenRadiusAuthID FROM ADTRAN-SHARED-CND-SYSTEM-MIB; adGenRadiusAuthMIB MODULE-IDENTITY LAST-UPDATED "201402190000Z" -- 19 Feb. 2014 ORGANIZATION "ADTRAN, Inc." CONTACT-INFO "CND Tech Support Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "This MIB defines the objects for Generic Radius Authentication MIB." REVISION "201402190000Z" DESCRIPTION "Add adGenRadiusAuthRelayCallingStationIdDelim and adGenRadiusAuthRelayAllowList OIDs to the adGenRadiusAuthRelayTable" REVISION "201310210000Z" DESCRIPTION "Add adGenRadiusAuthRelayOperStatus OID to the adGenRadiusAuthRelayTable" REVISION "201309060000Z" DESCRIPTION "Add adGenRadiusAuthRelayTable" REVISION "201306130000Z" DESCRIPTION "Change during development phase. Removed adGenRadiusAuthServerRetries and adGenRadiusAuthServerContactTimeout in adGenRadiusAuthServerTable" ::= { adGenRadiusAuthID 1 } -- OBJECT IDENTIFIERS adGenRadiusAuthMIBObjects OBJECT IDENTIFIER ::= {adGenRadiusAuth 1} adGenRadiusAuthProv OBJECT IDENTIFIER ::= {adGenRadiusAuthMIBObjects 1} adGenRadiusAuthStatus OBJECT IDENTIFIER ::= {adGenRadiusAuthMIBObjects 2} -- ********************************************************************** -- Textual Conventions -- ********************************************************************** AdGenRadiusRelayOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value determines the operational status of the Radius Relay." SYNTAX INTEGER { up(1), down(2) } -- ********************************************************************** -- ********************************************************************** adGenRadiusAuthGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenRadiusAuthGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the RADIUS server groups" ::= { adGenRadiusAuthProv 1 } adGenRadiusAuthGroupEntry OBJECT-TYPE SYNTAX AdGenRadiusAuthGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS Group" INDEX { IMPLIED adGenRadiusAuthGroupName } ::= { adGenRadiusAuthGroupTable 1 } AdGenRadiusAuthGroupEntry ::= SEQUENCE { adGenRadiusAuthGroupName DisplayString, adGenRadiusAuthGroupNASId DisplayString, adGenRadiusAuthGroupNASPortId DisplayString, adGenRadiusAuthGroupVendorId Unsigned32, adGenRadiusAuthGroupVendorDescription DisplayString, adGenRadiusAuthGroupLastError DisplayString, adGenRadiusAuthGroupDeadTime Unsigned32, adGenRadiusAuthGroupRowStatus RowStatus } adGenRadiusAuthGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A user configurable name for the Group of Radius Servers." ::= { adGenRadiusAuthGroupEntry 1} adGenRadiusAuthGroupNASId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "A user configurable string identifying the Network Access Server (NAS) originating the Access-Requests. This is used as the value for the NAS-Identifier RADIUS attribute." DEFVAL {""} ::= { adGenRadiusAuthGroupEntry 2} adGenRadiusAuthGroupNASPortId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "A user configurable string identifying the port of the Network Access Server (NAS) which is authenticating the user. This is used as the value for the NAS-Port-Id RADIUS attribute." DEFVAL {""} ::= { adGenRadiusAuthGroupEntry 3} adGenRadiusAuthGroupVendorId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Private Enterprise Code of the NAS equipment, as defined in the 'Assigned Numbers' RFC. The value for Adtran is 664. This is used as the Vendor-Id value for the Vendor-Specific RADIUS attribute." DEFVAL {664} ::= { adGenRadiusAuthGroupEntry 4} adGenRadiusAuthGroupVendorDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "A user configurable string describing the NAS equipment. This is used as the String value for the Vendor-Specific RADIUS attribute." DEFVAL {""} ::= { adGenRadiusAuthGroupEntry 5} adGenRadiusAuthGroupLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last error that occurred" DEFVAL {""} ::= { adGenRadiusAuthGroupEntry 6} adGenRadiusAuthGroupDeadTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time (in minutes) a server is considered unavailable if requests time out for the configured retransmit count" DEFVAL { 0 } ::= { adGenRadiusAuthGroupEntry 7} adGenRadiusAuthGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in the Radius Group Table." ::= { adGenRadiusAuthGroupEntry 8} --================================================================================================================== adGenRadiusAuthGroupTableLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last error that occurred when modifying the table" ::= { adGenRadiusAuthProv 2} --================================================================================================================== adGenRadiusAuthGroupListTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenRadiusAuthGroupListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the RADIUS server groups" ::= { adGenRadiusAuthProv 3 } adGenRadiusAuthGroupListEntry OBJECT-TYPE SYNTAX AdGenRadiusAuthGroupListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS Group. Each Group can be configured with a maximum number of Radius Servers." INDEX { adGenRadiusAuthGroupNameFixedLen, adGenRadiusAuthGroupListSeqIndex } ::= { adGenRadiusAuthGroupListTable 1 } AdGenRadiusAuthGroupListEntry ::= SEQUENCE { adGenRadiusAuthGroupNameFixedLen OCTET STRING, adGenRadiusAuthGroupListSeqIndex Unsigned32, adGenRadiusAuthGroupListServerName DisplayString } adGenRadiusAuthGroupNameFixedLen OBJECT-TYPE SYNTAX OCTET STRING (SIZE (50)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the Radius Group to which the Radius Server should be added. This string matches adGenRadiusAuthGroupName from adGenRadiusAuthGroupTable, but it is padded at the end with 0x00 so that the table index has a fixed length of 50 characters." ::= { adGenRadiusAuthGroupListEntry 1} adGenRadiusAuthGroupListSeqIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Sequence Number of the Server. Priority order of servers in the list" ::= { adGenRadiusAuthGroupListEntry 2} adGenRadiusAuthGroupListServerName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of Radius Server set in the adGenRadiusAuthServerTable. The server name will default to an empty string until set by user" ::= { adGenRadiusAuthGroupListEntry 3} --================================================================================================================== adGenRadiusAuthNumOfServersPerGroup OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the number of servers allow per server group" ::= { adGenRadiusAuthProv 4} --================================================================================================================== adGenRadiusAuthServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenRadiusAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the RADIUS servers" ::= { adGenRadiusAuthProv 5 } adGenRadiusAuthServerEntry OBJECT-TYPE SYNTAX AdGenRadiusAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RADIUS settings table." INDEX { IMPLIED adGenRadiusAuthServerName} ::= { adGenRadiusAuthServerTable 1 } AdGenRadiusAuthServerEntry ::= SEQUENCE { adGenRadiusAuthServerName DisplayString, adGenRadiusAuthServerInetAddressType InetAddressType, adGenRadiusAuthServerInetAddress InetAddress, adGenRadiusAuthServerInetAddressPort InetPortNumber, adGenRadiusAuthServerSecret DisplayString, adGenRadiusAuthServerLastError DisplayString, adGenRadiusAuthServerRowStatus RowStatus } adGenRadiusAuthServerName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Radius Server" ::= { adGenRadiusAuthServerEntry 1} adGenRadiusAuthServerInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Ip Address Type of Radius Server" DEFVAL { ipv4 } ::= { adGenRadiusAuthServerEntry 2} adGenRadiusAuthServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Ip Address of Radius Server" DEFVAL {"0.0.0.0"} ::= { adGenRadiusAuthServerEntry 3} adGenRadiusAuthServerInetAddressPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP port number of the Radius Server." DEFVAL {1812} ::= { adGenRadiusAuthServerEntry 4} adGenRadiusAuthServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The key used in encrypting the packets passed between the RADIUS Server and the client. This key must match the one configured on the server." DEFVAL {""} ::= { adGenRadiusAuthServerEntry 5} adGenRadiusAuthServerLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last error that occurred" DEFVAL {""} ::= { adGenRadiusAuthServerEntry 6} adGenRadiusAuthServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in the Radius Server List Table." ::= { adGenRadiusAuthServerEntry 7} --================================================================================================================== adGenRadiusAuthServerTableLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last error that occurred while modifying the server table" ::= { adGenRadiusAuthProv 6} --================================================================================================================== adGenRadiusAuthRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenRadiusAuthRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries for the Radius Relay" ::= { adGenRadiusAuthProv 7 } adGenRadiusAuthRelayEntry OBJECT-TYPE SYNTAX AdGenRadiusAuthRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RADIUS Relay table." INDEX { adGenSlotInfoIndex, IMPLIED adGenRadiusAuthRelayName} ::= { adGenRadiusAuthRelayTable 1 } AdGenRadiusAuthRelayEntry ::= SEQUENCE { adGenRadiusAuthRelayName DisplayString, adGenRadiusAuthRelayIPHostIfIndex InterfaceIndex, adGenRadiusAuthRelayIPHostName DisplayString, adGenRadiusAuthRelayNasId DisplayString, adGenRadiusAuthRelayUserNameOverride INTEGER, adGenRadiusAuthRelayNasIPOverride INTEGER, adGenRadiusAuthRelayVendorSpecificId Unsigned32, adGenRadiusAuthRelayVendorSpecificSubType Unsigned32, adGenRadiusAuthRelayVendorSpecificSubValue DisplayString, adGenRadiusAuthRelayLastError DisplayString, adGenRadiusAuthRelayRowStatus RowStatus, adGenRadiusAuthRelayOperStatus AdGenRadiusRelayOperStatus, adGenRadiusAuthRelayCallingStationIdDelim INTEGER, adGenRadiusAuthRelayAllowList DisplayString } adGenRadiusAuthRelayName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A user configurable name for the Radius Relay." ::= { adGenRadiusAuthRelayEntry 1} adGenRadiusAuthRelayIPHostIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ip-host's ifIndex." ::= { adGenRadiusAuthRelayEntry 2 } adGenRadiusAuthRelayIPHostName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "The ip-host's name." ::= { adGenRadiusAuthRelayEntry 3 } adGenRadiusAuthRelayNasId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "A user configurable string identifying the Network Access Server (NAS) to add or replace existing string in the Radius Message attribute. If empty string no addition or replacement will occur." DEFVAL {""} ::= { adGenRadiusAuthRelayEntry 4} adGenRadiusAuthRelayUserNameOverride OBJECT-TYPE SYNTAX INTEGER { disabled(1), callingstationId(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Replaces user-name with mac-address found in the specified attribute. If disabled, does nothing" ::= { adGenRadiusAuthRelayEntry 5 } adGenRadiusAuthRelayNasIPOverride OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Replaces Radius client IP address with public IP when enabled" ::= { adGenRadiusAuthRelayEntry 6 } adGenRadiusAuthRelayVendorSpecificId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Used to add a vendor specific attribute to the Radius Message. The value is the Vendor IANA Private Enterprise Code. A value of 0 indicates that a vendor specific attribute will not be modified or added." ::= { adGenRadiusAuthRelayEntry 7 } adGenRadiusAuthRelayVendorSpecificSubType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Used to add a vendor specific attribute Sub-Type to the Radius Message." ::= { adGenRadiusAuthRelayEntry 8 } adGenRadiusAuthRelayVendorSpecificSubValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Used to add a vendor specific attribute Sub-Value to the Radius Message." ::= { adGenRadiusAuthRelayEntry 9 } adGenRadiusAuthRelayLastError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last error that occurred" DEFVAL {""} ::= { adGenRadiusAuthRelayEntry 10} adGenRadiusAuthRelayRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row, modify or delete an existing row in the Radius Relay Table." ::= { adGenRadiusAuthRelayEntry 11} adGenRadiusAuthRelayOperStatus OBJECT-TYPE SYNTAX AdGenRadiusRelayOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the Radius Relay. The Relay OperStatus is UP if the rowstatus is active and the ip host that is set exist. Otherwise OperStatus is down. If OperStatus is down and RowStatus is active, the adGenRadiusAuthRelayLastError OID will be updated for the reason it is down" ::= { adGenRadiusAuthRelayEntry 12} adGenRadiusAuthRelayCallingStationIdDelim OBJECT-TYPE SYNTAX INTEGER { noAction(1), colons(2), hyphens(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ensures MAC address in Calling-Station-Id attribute contains the selected delimiter. If noAction, does nothing" DEFVAL {noAction} ::= { adGenRadiusAuthRelayEntry 13} adGenRadiusAuthRelayAllowList OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A list of Radius Attribute types that are allowed through the Relay in the client-to-server direction. Each Radius Attribute type has a 1-255 value. Many are defined in RFC 2865. The Allow List is a comma-separated string of these values. For instance, 1,4,12,24,26,31,32,79,80,87. If empty string all attributes are allowed through." DEFVAL {""} ::= { adGenRadiusAuthRelayEntry 14} --================================================================================================================== adGenRadiusAuthRelayErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenRadiusAuthRelayErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries for the Radius Relay Error Table" ::= { adGenRadiusAuthProv 8 } adGenRadiusAuthRelayErrorEntry OBJECT-TYPE SYNTAX AdGenRadiusAuthRelayErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RADIUS Relay Error table." INDEX { adGenSlotInfoIndex} ::= { adGenRadiusAuthRelayErrorTable 1 } AdGenRadiusAuthRelayErrorEntry::= SEQUENCE { adGenRadiusAuthRelayTableLastCreateError DisplayString } adGenRadiusAuthRelayTableLastCreateError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last error that occurred while creating a row in the Radius Relay table" ::= { adGenRadiusAuthRelayErrorEntry 1} --================================================================================================================== adGenRadiusAuthStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenRadiusAuthStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret." ::= { adGenRadiusAuthStatus 1 } adGenRadiusAuthStatusEntry OBJECT-TYPE SYNTAX AdGenRadiusAuthStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret. Entries are uniquely identified by the ifIndex of the client (IP host) and a numerical index for each server the client communicates with." INDEX { adGenRadiusAuthStatusIfIndex, adGenRadiusAuthStatusIpHostNameFixedLen, IMPLIED adGenRadiusAuthStatusServerName } ::= { adGenRadiusAuthStatusTable 1 } AdGenRadiusAuthStatusEntry ::= SEQUENCE { adGenRadiusAuthStatusIfIndex InterfaceIndex, adGenRadiusAuthStatusIpHostNameFixedLen OCTET STRING, adGenRadiusAuthStatusServerName DisplayString, adGenRadiusAuthStatusInetAddressType InetAddressType, adGenRadiusAuthStatusInetAddress InetAddress, adGenRadiusAuthStatusInetPortNumber InetPortNumber, adGenRadiusAuthStatusRoundTripTime TimeTicks, adGenRadiusAuthStatusAccessRequests Counter32, adGenRadiusAuthStatusAccessRetransmissions Counter32, adGenRadiusAuthStatusAccessAccepts Counter32, adGenRadiusAuthStatusAccessRejects Counter32, adGenRadiusAuthStatusAccessChallenges Counter32, adGenRadiusAuthStatusMalformedAccessResponses Counter32, adGenRadiusAuthStatusBadAuthenticators Counter32, adGenRadiusAuthStatusPendingRequests Gauge32, adGenRadiusAuthStatusTimeouts Counter32, adGenRadiusAuthStatusUnknownTypes Counter32, adGenRadiusAuthStatusPacketsDropped Counter32, adGenRadiusAuthStatusCounterDiscontinuity TimeTicks, adGenRadiusAuthStatusServerState INTEGER } adGenRadiusAuthStatusIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This interface index of the client (IP host) communicating with this Server." ::= { adGenRadiusAuthStatusEntry 1} adGenRadiusAuthStatusIpHostNameFixedLen OBJECT-TYPE SYNTAX OCTET STRING (SIZE (80)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ip-host's name with fixed len. Name is padded with zeros." ::= { adGenRadiusAuthStatusEntry 2} adGenRadiusAuthStatusServerName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Radius Server set in the adGenRadiusAuthServerTable" ::= { adGenRadiusAuthStatusEntry 3} adGenRadiusAuthStatusInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address format used for the adGenRadiusAuthStatusInetAddress object." ::= { adGenRadiusAuthStatusEntry 4 } adGenRadiusAuthStatusInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the RADIUS authentication server referred to in this table entry, using the version-neutral IP address format." ::= { adGenRadiusAuthStatusEntry 5 } adGenRadiusAuthStatusInetPortNumber OBJECT-TYPE SYNTAX InetPortNumber ( 1..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server. The value of zero (0) is invalid." REFERENCE "RFC 2865 section 3" ::= { adGenRadiusAuthStatusEntry 6 } adGenRadiusAuthStatusRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server." REFERENCE "RFC 2865 section 2" ::= { adGenRadiusAuthStatusEntry 7 } -- Request/Response statistics -- -- TotalIncomingPackets = Accepts + Rejects + Challenges + -- UnknownTypes -- -- TotalIncomingPackets - MalformedResponses - -- BadAuthenticators - UnknownTypes - PacketsDropped = -- Successfully received -- -- AccessRequests + PendingRequests + ClientTimeouts = -- Successfully received -- -- adGenRadiusAuthStatusAccessRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 section 4.1" ::= { adGenRadiusAuthStatusEntry 8 } adGenRadiusAuthStatusAccessRetransmissions OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 sections 2.5, 4.1" ::= { adGenRadiusAuthStatusEntry 9 } adGenRadiusAuthStatusAccessAccepts OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets (valid or invalid) received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 section 4.2" ::= { adGenRadiusAuthStatusEntry 10 } adGenRadiusAuthStatusAccessRejects OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets (valid or invalid) received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 section 4.3" ::= { adGenRadiusAuthStatusEntry 11 } adGenRadiusAuthStatusAccessChallenges OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 section 4.4" ::= { adGenRadiusAuthStatusEntry 12 } -- "Access-Response" includes an Access-Accept, Access-Challenge, -- or Access-Reject adGenRadiusAuthStatusMalformedAccessResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not included as malformed access responses. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 sections 3, 4" ::= { adGenRadiusAuthStatusEntry 13 } adGenRadiusAuthStatusBadAuthenticators OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 section 3" ::= { adGenRadiusAuthStatusEntry 14 } adGenRadiusAuthStatusPendingRequests OBJECT-TYPE SYNTAX Gauge32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission." REFERENCE "RFC 2865 section 2" ::= { adGenRadiusAuthStatusEntry 15 } adGenRadiusAuthStatusTimeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 sections 2.5, 4.1" ::= { adGenRadiusAuthStatusEntry 16 } adGenRadiusAuthStatusUnknownTypes OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type that were received from this server on the authentication port. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." REFERENCE "RFC 2865 section 4" ::= { adGenRadiusAuthStatusEntry 17 } adGenRadiusAuthStatusPacketsDropped OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from this server on the authentication port and dropped for some other reason. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity." ::= { adGenRadiusAuthStatusEntry 18 } adGenRadiusAuthStatusCounterDiscontinuity OBJECT-TYPE SYNTAX TimeTicks UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of centiseconds since the last discontinuity in the RADIUS Client counters. A discontinuity may be the result of a reinitialization of the RADIUS Client module within the managed entity." ::= { adGenRadiusAuthStatusEntry 19 } adGenRadiusAuthStatusServerState OBJECT-TYPE SYNTAX INTEGER { active(1), dead(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Radius Server is accessible" ::= { adGenRadiusAuthStatusEntry 20 } END