ADTRAN-TA5K-LINK-AGGREGATION-MIB DEFINITIONS ::= BEGIN -- TITLE: The ADTRAN Total Access TA5000 Link Aggregation MIB -- PRODUCT: TA5000 SMs and AMs -- VERSION: 1.2 -- DATE: July 07, 2014 -- This MIB Contains tables specific to the TA5000 Tree Networking -- -- MIBs supported: IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Gauge32 FROM SNMPv2-SMI sysName FROM SNMPv2-MIB MacAddress, TruthValue FROM SNMPv2-TC ifIndex FROM IF-MIB adTa5kLinkAggregation, adTa5kLinkAggregationID FROM ADTRAN-GENTA5K-MIB adTrapInformSeqNum FROM ADTRAN-GENTRAPINFORM-MIB adGenPortTrapIdentifier FROM ADTRAN-GENPORT-MIB adGenSlotInfoIndex FROM ADTRAN-GENSLOT-MIB; -- ********************************************************************************************************* adTa5kLinkAggregationModuleIdentity MODULE-IDENTITY LAST-UPDATED "201407230000Z" ORGANIZATION "ADTRAN, Inc." CONTACT-INFO "CND Tech Support Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "Total Access 5000 Link Aggregation MIB" REVISION "201407230000Z" DESCRIPTION "Added OID for setting the LACP system priority per slot." REVISION "201309250000Z" DESCRIPTION "Added OID for setting the LACP response-mode per slot." REVISION "201111301918Z" DESCRIPTION "Added OIDs for LACP counters and statuses." REVISION "201110261800Z" DESCRIPTION "Add provisioning for alarm enable/disable." ::= { adTa5kLinkAggregationID 1 } -- OBJECT IDENTIFIERS adTa5kLinkAggregationAlarmPrefix OBJECT IDENTIFIER ::= { adTa5kLinkAggregation 1 } adTa5kLinkAggregationAlarms OBJECT IDENTIFIER ::= { adTa5kLinkAggregationAlarmPrefix 0} adTa5kLinkAggregationProvisioning OBJECT IDENTIFIER ::= { adTa5kLinkAggregation 2} adTa5kLinkAggregationPerformance OBJECT IDENTIFIER ::= { adTa5kLinkAggregation 3 } adTa5kLinkAggregationStatus OBJECT IDENTIFIER ::= { adTa5kLinkAggregation 4 } -- ****************************************************************************************** -- Provisioning Table -- ****************************************************************************************** adTa5kLinkAggLACPProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggLACPProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LACP Provisioning Table." ::= { adTa5kLinkAggregationProvisioning 1 } adTa5kLinkAggLACPProvEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggLACPProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LACP Provisioning Table." INDEX { ifIndex } ::= { adTa5kLinkAggLACPProvTable 1 } AdTa5kLinkAggLACPProvEntry ::= SEQUENCE { adTa5kLinkAggLACPMode INTEGER, adTa5kLinkAggLACPGrammar INTEGER } adTa5kLinkAggLACPMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), active (2), passive (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "LACP Mode for the network port." ::= {adTa5kLinkAggLACPProvEntry 1} adTa5kLinkAggLACPGrammar OBJECT-TYPE SYNTAX INTEGER { standbyAggregation(1), noStandbyAggregation(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The LACP grammar for a given ethernet interface. Setting this value to standbyAggregation(1) declares that the standby module's port is capable of being aggregated, so the AGGREGATION bit is always high in the LACP PDU. standbyAggregation(1) is the recommended setting for Juniper switches. Setting this value to noStandbyAggregation(2) declares that the standby module's port is not capable of being aggregated. This is the recommended setting for Cisco switches." ::= { adTa5kLinkAggLACPProvEntry 2 } -- ****************************************************************************************** -- Alarm Provisioning -- ****************************************************************************************** adTa5kLinkAggAlarmProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggAlarmProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Aggregation Alarm Provisioning" ::= { adTa5kLinkAggregationProvisioning 2 } adTa5kLinkAggAlarmProvEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggAlarmProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Link Aggregation Alarm Provisioning table" INDEX { ifIndex } ::= { adTa5kLinkAggAlarmProvTable 1 } AdTa5kLinkAggAlarmProvEntry ::= SEQUENCE { adTa5kLinkAggLACPTimeOutAlarmEnable TruthValue, adTa5kLinkAggMinimumActiveLnkAlarmEnable TruthValue } adTa5kLinkAggLACPTimeOutAlarmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "True - alarm is enabled" DEFVAL {true} ::= { adTa5kLinkAggAlarmProvEntry 1 } adTa5kLinkAggMinimumActiveLnkAlarmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "True - alarm is enabled" DEFVAL {true} ::= { adTa5kLinkAggAlarmProvEntry 2 } adTa5kLinkAggLACPSlotProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggLACPSlotProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LACP Slot Provisioning Table." ::= { adTa5kLinkAggregationProvisioning 3 } adTa5kLinkAggLACPSlotProvEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggLACPSlotProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LACP Slot Provisioning Table." INDEX { adGenSlotInfoIndex } ::= { adTa5kLinkAggLACPSlotProvTable 1 } AdTa5kLinkAggLACPSlotProvEntry ::= SEQUENCE { adTa5kLinkAggLACPResponseMode INTEGER, adTa5kLinkAggLACPSlotSystemPriority INTEGER } adTa5kLinkAggLACPResponseMode OBJECT-TYPE SYNTAX INTEGER { reporterOnly (1), interactive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LACP Response Mode for all LACP-capable ports on the slot. Sets the behavior of the LACP state machine on the system to either only report LACP messages to the partner, or to interactively respond to the partner requests to add/remove ports from operation within the LAG group." DEFVAL {reporterOnly} ::= {adTa5kLinkAggLACPSlotProvEntry 1} adTa5kLinkAggLACPSlotSystemPriority OBJECT-TYPE SYNTAX INTEGER (1..35535) MAX-ACCESS read-write STATUS current DESCRIPTION "A 2-octet read-write value indicating the priority value associated with the Actor's System ID" ::= {adTa5kLinkAggLACPSlotProvEntry 2} -- ****************************************************************************************** -- Alarms -- ****************************************************************************************** adTa5kSmLACPTimeOutClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenPortTrapIdentifier } STATUS current DESCRIPTION "Indicates that LACP timeout alarm has cleared" --#TYPE "Status - LACP Timeout Clear" --#SUMMARY "TA5000 Switch Module: LACP Timeout Alarm Cleared on" --#SUMMARY "Shelf: %s Slot, Port: %s" --#ARGUMENTS {1,3} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTa5kLinkAggregationAlarms 2 } adTa5kSmLACPTimeOutActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenPortTrapIdentifier } STATUS current DESCRIPTION "Indicates the SM is not receiving LACP messages" --#TYPE "Status - LACP Timeout Alarm Active" --#SUMMARY "TA5000 Switch Module: LACP Timeout Alarm Active on" --#SUMMARY "Shelf: %s Slot, Port: %s" --#ARGUMENTS {1,3} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTa5kLinkAggregationAlarms 3 } adTa5kSmUnderMiniActiveLnkClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, ifIndex } STATUS current DESCRIPTION "Indicates that the number of active links falls below Minimum Active Links threshold has cleard" --#TYPE "Status - below Minimum Active links threshold Alarm Clear" --#SUMMARY "TA5000 Switch Module: Below Minimum Active links threshold Alarm Cleared on" --#SUMMARY "Shelf: %s, slot: %d" --#ARGUMENTS {1,2} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTa5kLinkAggregationAlarms 4 } adTa5kSmUnderMiniActiveLnk NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, ifIndex } STATUS current DESCRIPTION "Indicates that the number of active links falls below Minimum Active Links threshold alarm is active" --#TYPE "Status - below Minimum Active links threshold Alarm Active" --#SUMMARY "TA5000 Switch Module: Below Minimum Active links threshold Alarm Active on" --#SUMMARY "Shelf: %s, slot: %d" --#ARGUMENTS {1,2} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTa5kLinkAggregationAlarms 5 } -- ****************************************************************************************** -- Port Statistics Table -- ****************************************************************************************** adTa5kLinkAggLACPPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggLACPPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LACP Port Statistics Table." ::= { adTa5kLinkAggregationPerformance 1 } adTa5kLinkAggLACPPortStatsEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggLACPPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LACP Port Statistics Table." INDEX { ifIndex } ::= { adTa5kLinkAggLACPPortStatsTable 1 } AdTa5kLinkAggLACPPortStatsEntry ::= SEQUENCE { adTa5kLinkAggPortStatsLACPDUsTx Gauge32, adTa5kLinkAggPortStatsLACPDUsRx Gauge32, adTa5kLinkAggPortStatsMarkerPDUsRx Gauge32, adTa5kLinkAggPortStatsMarkerResponsePDUsTx Gauge32 } adTa5kLinkAggPortStatsLACPDUsTx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACPDUs transmitted on this Aggregation Port." ::= { adTa5kLinkAggLACPPortStatsEntry 1 } adTa5kLinkAggPortStatsLACPDUsRx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid LACPDUs received on this Aggregation Port." ::= { adTa5kLinkAggLACPPortStatsEntry 2 } adTa5kLinkAggPortStatsMarkerPDUsRx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid Marker PDUs received on this Aggregation Port." ::= { adTa5kLinkAggLACPPortStatsEntry 3 } adTa5kLinkAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Marker Response PDUs transmitted on this Aggregation Port." ::= { adTa5kLinkAggLACPPortStatsEntry 4 } -- ****************************************************************************************** -- System Status Table -- ****************************************************************************************** adTa5kLinkAggLACPStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggLACPStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LACP Port Status Table." ::= { adTa5kLinkAggregationStatus 1 } adTa5kLinkAggLACPStatusEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggLACPStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LACP Status Table." INDEX { ifIndex } ::= { adTa5kLinkAggLACPStatusTable 1 } AdTa5kLinkAggLACPStatusEntry ::= SEQUENCE { adTa5kLinkAggLACPSystemID MacAddress, adTa5kLinkAggLACPSystemPriority INTEGER } adTa5kLinkAggLACPSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability." ::= { adTa5kLinkAggLACPStatusEntry 1 } adTa5kLinkAggLACPSystemPriority OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A 2-octet read-write value indicating the priority value associated with the Actor's System ID" ::= { adTa5kLinkAggLACPStatusEntry 2 } -- ****************************************************************************************** -- Port Status Table -- ****************************************************************************************** adTa5kLinkAggLACPPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggLACPPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LACP Port Status Table." ::= { adTa5kLinkAggregationStatus 2 } adTa5kLinkAggLACPPortStatusEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggLACPPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LACP Port Status Table." INDEX { ifIndex } ::= { adTa5kLinkAggLACPPortStatusTable 1 } AdTa5kLinkAggLACPPortStatusEntry ::= SEQUENCE { adTa5kLinkAggLACPActorPortState BITS, adTa5kLinkAggLACPActorPortID INTEGER, adTa5kLinkAggLACPActorPortKey INTEGER, adTa5kLinkAggLACPActorPortPriority INTEGER, adTa5kLinkAggLACPPartnerPortState BITS, adTa5kLinkAggLACPPartnerPortID INTEGER, adTa5kLinkAggLACPPartnerPortKey INTEGER, adTa5kLinkAggLACPPartnerPortPriority INTEGER, adTa5kLinkAggLACPPartnerPortSystemID MacAddress, adTa5kLinkAggLACPPartnerPortSystemPriority INTEGER } adTa5kLinkAggLACPActorPortState OBJECT-TYPE SYNTAX BITS { lacpActivity (0), lacpTimeout (1), aggregation (2), synchronization (3), collecting (4), distributing (5), defaulted (6), expired (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "(0) lacpActivity: 1 indicates active LACP. 0 indicates passive LACP. (1) lacpTimeout: 1 indicates a short timeout. 0 indicates a long timeout. (2) aggregation: 1 indicates the system considers this link to be a potential candidate for aggregation. (3) synchronization: 1 indicates the system considers this link to be IN_SYNC. (4) collecting: 1 indicates collection is currently enabled and is not expected to be disabled in the absence of administrative changes or changes in received protocol information. (5) distributing: 0 indicates distribution is currently disabled and is not expected to be enabled in the absence of administrative changes or changes in received protocol information. (6) defaulted: 1 indicates the actors receive machine has defaulted. (7) expired: 1 indicates the actors receive machine has expired." ::= { adTa5kLinkAggLACPPortStatusEntry 1 } adTa5kLinkAggLACPActorPortID OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This should be converted to hex." ::= { adTa5kLinkAggLACPPortStatusEntry 2 } adTa5kLinkAggLACPActorPortKey OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The current operational value of the Key for the Aggregation Port." ::= { adTa5kLinkAggLACPPortStatusEntry 3 } adTa5kLinkAggLACPActorPortPriority OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority value assigned to the port, used to converge dynamic Key changes. This should be converted to hex." ::= { adTa5kLinkAggLACPPortStatusEntry 4 } adTa5kLinkAggLACPPartnerPortState OBJECT-TYPE SYNTAX BITS { lacpActivity (0), lacpTimeout (1), aggregation (2), synchronization (3), collecting (4), distributing (5), defaulted (6), expired (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "(0) lacpActivity: 1 indicates active LACP. 0 indicates passive LACP. (1) lacpTimeout: 1 indicates a short timeout. 0 indicates a long timeout. (2) aggregation: 1 indicates the system considers this link to be a potential candidate for aggregation. (3) synchronization: 1 indicates the system considers this link to be IN_SYNC. (4) collecting: 1 indicates collection is currently enabled and is not expected to be disabled in the absence of administrative changes or changes in received protocol information. (5) distributing: 0 indicates distribution is currently disabled and is not expected to be enabled in the absence of administrative changes or changes in received protocol information. (6) defaulted: 1 indicates the actors receive machine has defaulted. (7) expired: 1 indicates the actors receive machine has expired." ::= { adTa5kLinkAggLACPPortStatusEntry 5 } adTa5kLinkAggLACPPartnerPortID OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Partner_Port. This should be converted to hex." ::= { adTa5kLinkAggLACPPortStatusEntry 6 } adTa5kLinkAggLACPPartnerPortKey OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The current operational value of the Key for the Aggregation Port." ::= { adTa5kLinkAggLACPPortStatusEntry 7 } adTa5kLinkAggLACPPartnerPortPriority OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The operational value of the port number assigned to this link by the Partner. The Actor sets this variable either to the value received from the Partner in an LACPDU, or to the value of Partner_Admin_Port_Number. This should be converted to hex." ::= { adTa5kLinkAggLACPPortStatusEntry 8 } adTa5kLinkAggLACPPartnerPortSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port." ::= { adTa5kLinkAggLACPPortStatusEntry 9 } adTa5kLinkAggLACPPartnerPortSystemPriority OBJECT-TYPE SYNTAX INTEGER ( 0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value that indicates the priority value associated with the Partner’s System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System." ::= { adTa5kLinkAggLACPPortStatusEntry 10 } -- ****************************************************************************************** -- State Machine Table -- ****************************************************************************************** adTa5kLinkAggLACPStateMachineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTa5kLinkAggLACPStateMachineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LACP Port Status Table." ::= { adTa5kLinkAggregationStatus 3 } adTa5kLinkAggLACPStateMachineEntry OBJECT-TYPE SYNTAX AdTa5kLinkAggLACPStateMachineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LACP Status Table." INDEX { ifIndex } ::= { adTa5kLinkAggLACPStateMachineTable 1 } AdTa5kLinkAggLACPStateMachineEntry ::= SEQUENCE { adTa5kLinkAggLACPSelectedState INTEGER, adTa5kLinkAggLACPReceiveState INTEGER, adTa5kLinkAggLACPPeriodicTxState INTEGER, adTa5kLinkAggLACPMuxState INTEGER } adTa5kLinkAggLACPSelectedState OBJECT-TYPE SYNTAX INTEGER { unselected (0), selected (1), standby (2), notAvailable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "(1) unslected: This state indicates that no aggregator is currently selected. (2) selected: This state indicates that the Selection Logic has selected an appropriate Aggregator. (3) standby: This state indicates that although the Selection Logic has selected an appropriate Aggregator, aggregation restrictions currently prevent the port from being enabled as part of the aggregation. (255) notAvailable: LACP is disabled. " ::= { adTa5kLinkAggLACPStateMachineEntry 1 } adTa5kLinkAggLACPReceiveState OBJECT-TYPE SYNTAX INTEGER { initialize (0), portDisabled (1), expired (2), lacpDisabled (3), defaulted (4), current (5), notAvailable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "(1) initialize: This state causes the administrative values of the Partner parameters to be used as the current operational values. (2) portDisabled: This state indicates that the port has become inoperable and a BEGIN event has not occurred. (3) expired: This state indicates that no LACPDU was received before the current_while timer expired. (4) lacpDisabled: This state indicates that the port is enabled but something has caused LACP to become diabled such as the port operating in half duplex. (5) defaulted: This state indicates that no LACPDU was received before the current_while timer expired a second time after the receive state entered the expired state. (6) current: This state is entered upon receival of a LACPDU. (255) notAvailable: LACP is disabled. " ::= { adTa5kLinkAggLACPStateMachineEntry 2 } adTa5kLinkAggLACPPeriodicTxState OBJECT-TYPE SYNTAX INTEGER { noPeriodic (0), fastPeriodic (1), slowPeriodic (2), periodicTx (3), notAvailable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "(1) noPeriodic: While in this state, periodic transmissions are disabled. (2) fastPeriodic: While in this state, periodic transmissions are enabled at a fast transmission rate. (3) slowPeriodic: While in this state, periodic transmissions are enabled at a slow transmission rate. (4) periodicTx:This is a transitory state entered on periodic_timer expiry, that asserts NTT and then exits to FAST_PERIODIC or SLOW_PERIODIC depending upon the Partner’s LACP_Timeout setting. (255) notAvailable: LACP is disabled. " ::= { adTa5kLinkAggLACPStateMachineEntry 3 } adTa5kLinkAggLACPMuxState OBJECT-TYPE SYNTAX INTEGER { detached (0), waiting (1), attached (2), collecting (3), distributing (4), notAvailable (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "(1) detached: This state indicates that the port is either in the process of being detached or is currently detached from the Aggregator. A port may be detached from the Aggregator used by its Link Aggregation Group as a result of protocol(e.g., Key) changes, or because of System constraints (e.g., exceeding a maximum allowable number of aggregated links, or device failures) at either end of the link. (2) waiting: This state indicates that the mux is waiting to allow for the possibility that other ports may be reconfiguring at the same time. Once the wait_while_timer expires, and once the wait_while_timers of all other ports that are ready to attach to the same Aggregator have expired, the process of attaching the port to the Aggregator can proceed. (3) attached: This state indicates that the port is in the process of being attached to the Aggregator. (4) collecting: This state indicates that collection of frames from the port is enabled. (5) distributing: This state indicates that distribution of frames to the port is enabled. (255) notAvailable: LACP is disabled. " ::= { adTa5kLinkAggLACPStateMachineEntry 4 } END