ADTRAN-GENSHAPER-MIB -- TITLE: The ADTRAN Shaper MIB -- PRODUCT: Metro Ethernet Products -- VERSION: 1.0 -- DATE: 09/03/09 -- AUTHOR: Joey Boyd -- STATUS: PRELIMINARY -- This MIB defines the object identifiers (OIDs) for the -- ADTRAN GENSHAPER MIB objects -- HISTORY: -- 09/03/09 jlb STATUS: PRELIMINARY. -- 10/14/09 jlb Added adGenShaperProvApplicationType, adGenShaperSlotTable, and adGenShaperLookupPerInterfaceTable. -- 10/16/09 jlb Added unspecified(1) to adGenShaperProvApplicationType. -- 10/14/10 ams Added adGenShaperBurstSize. -- ****************************************************************************************** DEFINITIONS ::= BEGIN IMPORTS adGenShaper, adGenShaperID FROM ADTRAN-SHARED-CND-SYSTEM-MIB OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero, ifIndex FROM IF-MIB adGenSlotInfoIndex FROM ADTRAN-GENSLOT-MIB ; adGenShaperMIB MODULE-IDENTITY LAST-UPDATED "200910140000Z" ORGANIZATION "Adtran, Inc." CONTACT-INFO "CND Tech Support Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726 8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "This MIB defines the objects for the Shaper MIB." REVISION "200909030000Z" DESCRIPTION "Created" ::= { adGenShaperID 1 } adGenShaperProvisioning OBJECT IDENTIFIER ::= {adGenShaper 1} --================================================================================================================== adGenShaperProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenShaperProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Shaper provisioning table." ::= { adGenShaperProvisioning 1 } adGenShaperProvEntry OBJECT-TYPE SYNTAX AdGenShaperProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Shaper provisioning table. Shaper entries are uniquely identified by their name and slot." INDEX { adGenSlotInfoIndex, IMPLIED adGenShaperProvName } ::= { adGenShaperProvTable 1 } AdGenShaperProvEntry ::= SEQUENCE { adGenShaperProvName DisplayString, adGenShaperProvRowStatus RowStatus, adGenShaperProvOperStatus INTEGER, adGenShaperProvOperStatusDetail DisplayString, adGenShaperProvLastProvError DisplayString, adGenShaperProvApplication INTEGER, adGenShaperProvRate Unsigned32, adGenShaperProvInterface InterfaceIndexOrZero, adGenShaperBurstSize Unsigned32 } adGenShaperProvName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A user configurable name for the Shaper. Upon creation of the Shaper, the associated name will default to a unique value." ::= { adGenShaperProvEntry 1 } adGenShaperProvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in the Shaper table." ::= { adGenShaperProvEntry 2 } adGenShaperProvOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the current operational status of the Shaper." ::= { adGenShaperProvEntry 3 } adGenShaperProvOperStatusDetail OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This variable provides the Shaper status. If there is no error, the Shaper status will be 'running'. If there is an error and the Shaper cannot be applied, then adGenShaperProvOperStatusDetail will provide more details about the error." ::= { adGenShaperProvEntry 4 } adGenShaperProvLastProvError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This string describes the last error experienced for this particular entry in the table." ::= { adGenShaperProvEntry 5 } adGenShaperProvApplication OBJECT-TYPE SYNTAX INTEGER { unspecified(1), perInterface(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable specifies where the shaper is applied. This value will determine which combination of objects will be used to identify where the shaper is applied." ::= { adGenShaperProvEntry 6 } adGenShaperProvRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This variable specifies the shaper rate in kbps. The range supported is determined by the interface the shaper is connected to. The minimum shaper rate is 1kbps and the maximum is the line rate of the interface." ::= { adGenShaperProvEntry 7 } adGenShaperProvInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the Layer 2 Ethernet interface the shaper is applied to. A value of zero means this interface has not been set." ::= {adGenShaperProvEntry 8 } adGenShaperBurstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This variable configures the Burst Size in bytes for the shaper. The burst size specifies the number of consecutive bytes allowed to egress at the interface rate when no packets have been sent for some time." ::= { adGenShaperProvEntry 9 } --================================================================================================================== adGenShaperSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenShaperSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Shaper provisioning table." ::= { adGenShaperProvisioning 2 } adGenShaperSlotEntry OBJECT-TYPE SYNTAX AdGenShaperSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Shaper slot table. These items are applicable to the device and not to an individual shaper." INDEX { adGenSlotInfoIndex } ::= { adGenShaperSlotTable 1 } AdGenShaperSlotEntry ::= SEQUENCE { adGenShaperSlotLastCreateError DisplayString } adGenShaperSlotLastCreateError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If creation of a shaper fails. This string will be used to return the reason for failure." ::= { adGenShaperSlotEntry 1 } --================================================================================================================== adGenShaperLookupPerInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenShaperLookupPerInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Shaper lookup per interface table." ::= { adGenShaperProvisioning 3 } adGenShaperLookupPerInterfaceEntry OBJECT-TYPE SYNTAX AdGenShaperLookupPerInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Shaper lookup per interface table. This table will only contain entries for those interface that are connected to a shaper that is applied perInterface(2)." INDEX { ifIndex } ::= { adGenShaperLookupPerInterfaceTable 1 } AdGenShaperLookupPerInterfaceEntry ::= SEQUENCE { adGenShaperLookupPerInterface DisplayString } adGenShaperLookupPerInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If the selected interface is connected to a shaper that is applied perInterface(2), this object will contain the name of the shaper." ::= { adGenShaperLookupPerInterfaceEntry 1 } END