ADTRAN-GENFXO-MIB -- TITLE: The ADTRAN Generic FXO MIB -- PRODUCT: TA5000 -- VERSION: 1.0 -- DATE: 02/07/11 -- AUTHOR: Peter Kerr -- STATUS: PRELIMINARY -- This MIB defines the object identifiers (OIDs) for the -- ADTRAN FxoInterface Component. -- HISTORY: -- 02/07/11 PSK STATUS: PRELIMINARY. -- DO NOT MAKE HISTORY COMMENTS HERE!!!! Revision history now in REVISION/DESCRIPTION clauses below -- ***************************************************************************** DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC ifIndex, InterfaceIndexOrZero FROM IF-MIB adGenFxo, adGenFxoID FROM ADTRAN-SHARED-CND-SYSTEM-MIB ; adGenFxoIdentity MODULE-IDENTITY LAST-UPDATED "201406120000Z" ORGANIZATION "Adtran, Inc." CONTACT-INFO "CND Tech Support Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "This MIB defines the objects for an FXO interface." REVISION "201804040000Z" DESCRIPTION "Added support to access the description for FXO ports" REVISION "201406120000Z" DESCRIPTION "Added adGenFxoInterfaceRingTripMuteInterval to adGenFxoInterfaceProvTable." REVISION "201208220000Z" DESCRIPTION "Added adGenFxoInterfaceRingTripMode and adGenFxoInterfaceRingTripDuration to adGenFxoInterfaceProvTable." REVISION "201109120000Z" DESCRIPTION "PSK - Added adGenFxoInwardLoopbackTest and adGenFxoOutwardLoopbackTest to adGenFxoInterfaceTestsTable. Changed all instances of 'read-create' to 'read-write'" REVISION "201102080000Z" DESCRIPTION "Created" ::= { adGenFxoID 1 } --============================================================================== -- TEXTUAL CONVENTION --============================================================================== AdGenFxoInterfaceFxsLocation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the location of an fxs port within the network in the form of an octet string. Used when linking Fxo and Fxs ports (and querying existing links). The first octet defines the type of target, which also defines the format of the rest of the string. Valid types are: 1 = none Used to tear down a connection. 2 = ta5k_24p_pots A 24-port TA5000 POTS Access Module. 3 = gpon A GPON remote device. 4 = activeE An Active Ethernet remote device. For each type, the octet string format is as follows: (Each numbered item represents one octet.) none(1) - 1 = type As described above. ta5k_24p_pots(2) - 1 = type 2 = node_high Combined with following octet to form 16-bit node. 3 = node_low 4 = shelf 5 = device 6 = port gpon(3) - 1 = type 2 = node_high 3 = node_low 4 = shelf 5 = device 6 = PON 7 = ONT 8 = ONT port activeE(4) - 1 = type 2 = node_high 3 = node_low 4 = shelf 5 = device 6 = OLT port 7 = ONT port" SYNTAX OCTET STRING (SIZE(1..40)) --============================================================================== -- GROUPS --============================================================================== adGenFxoProvisioning OBJECT IDENTIFIER ::= {adGenFxo 1} adGenFxoStatus OBJECT IDENTIFIER ::= {adGenFxo 2} adGenFxoTest OBJECT IDENTIFIER ::= {adGenFxo 3} adGenFxoAlarms OBJECT IDENTIFIER ::= {adGenFxo 4} --============================================================================== -- Groups in FXO interface provisioning --============================================================================== adGenFxoDeviceProv OBJECT IDENTIFIER ::= { adGenFxoProvisioning 1 } adGenFxoInterfaceProv OBJECT IDENTIFIER ::= { adGenFxoProvisioning 2 } --****************************************************************************** -- This table is for device-level FXO interface provisioning. --****************************************************************************** -- Not supporting this at this time, because first product to use this MIB will -- not need dynamic tables. Can be added later. -- adGenFxoDeviceProvTable OBJECT-TYPE -- SYNTAX SEQUENCE OF AdGenFxoDeviceProvEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table supports provisioning of device-level FXO interface parameters. -- Used in conjunction with adGenFxoDeviceProv." -- ::= { adGenFxoDeviceProv 1 } -- adGenFxoDeviceProvEntry OBJECT-TYPE -- SYNTAX AdGenFxoDeviceProvEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "An entry in the adGenFxoDeviceProvTable." -- INDEX { ifIndex } -- ::= { adGenFxoDeviceProvTable 1 } -- AdGenFxoDeviceProvEntry ::= -- SEQUENCE -- { -- adGenFxoInterfaceProvCurrentNumber Unsigned32, -- adGenFxoInterfaceProvLastCreateError DisplayString -- } -- adGenFxoInterfaceProvCurrentNumber OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current number of FXO interfaces defined." -- ::= { adGenFxoDeviceProvEntry 1 } -- adGenFxoInterfaceProvLastCreateError OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The reason for the last error that occured while attempting to create -- an entry in the FxoInterface Component (adGenFxoInterfaceProvTable)." -- ::= { adGenFxoDeviceProvEntry 2 } --****************************************************************************** -- This table is for interface-level FXO provisioning. --****************************************************************************** adGenFxoInterfaceProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenFxoInterfaceProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports provisioning of interface-level FXO parameters. Used in conjunction with adGenFxoInterfaceProv." ::= { adGenFxoInterfaceProv 1 } adGenFxoInterfaceProvEntry OBJECT-TYPE SYNTAX AdGenFxoInterfaceProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenFxoInterfaceProvTable." INDEX { ifIndex } ::= { adGenFxoInterfaceProvTable 1 } AdGenFxoInterfaceProvEntry ::= SEQUENCE { adGenFxoInterfaceLastErrorString DisplayString, adGenFxoInterfaceSignalingMode INTEGER, adGenFxoInterfaceTxGain Integer32, adGenFxoInterfaceMinTxGain Integer32, adGenFxoInterfaceMaxTxGain Integer32, adGenFxoInterfaceRxGain Integer32, adGenFxoInterfaceMinRxGain Integer32, adGenFxoInterfaceMaxRxGain Integer32, adGenFxoInterfaceImpedance INTEGER, adGenFxoInterfaceCWCIdAckGenDelay Unsigned32, adGenFxoInterfaceCWCIdAckGenEnable INTEGER, adGenFxoInterfaceTargetFxsLocation AdGenFxoInterfaceFxsLocation, adGenFxoInterfaceRingTripMode INTEGER, adGenFxoInterfaceRingTripDuration Unsigned32, adGenFxoInterfaceRingTripMuteInterval Unsigned32, adGenFxoCircuitIdentifier DisplayString } adGenFxoInterfaceLastErrorString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the last error that occured while accessing an entry in the FXO Interface Prov Table." ::= { adGenFxoInterfaceProvEntry 1 } adGenFxoInterfaceSignalingMode OBJECT-TYPE SYNTAX INTEGER { loopStart(1), groundStart(2), tr08sp(3), tr08uvg(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to set signaling mode of the 2-Wire interface. 1 = loopStart Loop-Start signaling. 2 = groundStart Ground-Start signaling. 3 = tr08sp TR-08 Single Party signaling. 4 = tr08uvg TR-08 Universal Voice Grade signaling." ::= { adGenFxoInterfaceProvEntry 2 } adGenFxoInterfaceTxGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Set gain from the line (A/D)." ::= { adGenFxoInterfaceProvEntry 3 } adGenFxoInterfaceMinTxGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Tx Gain value for use in range checking." ::= { adGenFxoInterfaceProvEntry 4 } adGenFxoInterfaceMaxTxGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Tx Gain value for use in range checking." ::= { adGenFxoInterfaceProvEntry 5 } adGenFxoInterfaceRxGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Set gain toward the line (D/A)." ::= { adGenFxoInterfaceProvEntry 6 } adGenFxoInterfaceMinRxGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Rx Gain value for use in range checking." ::= { adGenFxoInterfaceProvEntry 7 } adGenFxoInterfaceMaxRxGain OBJECT-TYPE SYNTAX Integer32 UNITS "0.1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Rx Gain value for use in range checking." ::= { adGenFxoInterfaceProvEntry 8 } adGenFxoInterfaceImpedance OBJECT-TYPE SYNTAX INTEGER { z600r(1), z900z(2), z1(3), z2(4), z3(5), z4(6), z5(7), z6(8), z7(9), z8(10), z9(11), z10(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to set the terminating impedance of the interface. 1 = z600r 600 Ohms. 2 = z900z 900 Ohms + 2.16 uF. 3 = z1 220 + ( 820 // 115nF). 4 = z2 270 + ( 750 // 150nF). 5 = z3 270 + ( 750 // 150nF), Zin = 600r. 6 = z4 320 + (1050 // 230nF). 7 = z5 350 + (1000 // 210nF), Zin = 600r. 8 = z6 370 + ( 620 // 310nF). 9 = z7 800 // (100 + 50nF), Zin = 900c. 10 = z8 1650 // (100 + 5nF), Zin = 900c. 11 = z9 900c, Zin = 800 // (100 + 50nF). 12 = z10 900c, Zin = 1650 // (100 + 5nF)." ::= { adGenFxoInterfaceProvEntry 9 } adGenFxoInterfaceCWCIdAckGenDelay OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Use to set the Call-Waiting Caller-ID ACK generation delay." ::= { adGenFxoInterfaceProvEntry 10 } adGenFxoInterfaceCWCIdAckGenEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to enable/disable Caller-ID ACK generation during Call-Waiting interval." ::= { adGenFxoInterfaceProvEntry 11 } adGenFxoInterfaceTargetFxsLocation OBJECT-TYPE SYNTAX AdGenFxoInterfaceFxsLocation MAX-ACCESS read-write STATUS current DESCRIPTION "Use to connect FXO interface to an FXS interface." ::= { adGenFxoInterfaceProvEntry 12 } adGenFxoInterfaceRingTripMode OBJECT-TYPE SYNTAX INTEGER { normal(1), forced(2), delayed(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to set the ring-trip mode of the interface. 1 = normal Use a normal off-hook to trip ringing voltage. 2 = forced Force a ring-ground on loop to sink ringing current. 3 = delayed Wait until ring pause interval before going off-hook." ::= { adGenFxoInterfaceProvEntry 13 } adGenFxoInterfaceRingTripDuration OBJECT-TYPE SYNTAX Unsigned32 (50..300) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Use to set duration of the ring-ground interval in 'forced' ring-trip mode." ::= { adGenFxoInterfaceProvEntry 14 } adGenFxoInterfaceRingTripMuteInterval OBJECT-TYPE SYNTAX Unsigned32 (0..400) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Use to set a delay before enabling the voice path when going off-hook, exiting the 'forced' or 'delayed' ring-trip modes. Valid values are <0,20-400> ('0' to disable)." DEFVAL { 200 } ::= { adGenFxoInterfaceProvEntry 15 } adGenFxoCircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The circuit identifier string for the fxo port." ::= { adGenFxoInterfaceProvEntry 16 } --============================================================================== -- Groups in FXO interface status --============================================================================== adGenFxoDeviceStatus OBJECT IDENTIFIER ::= { adGenFxoStatus 1 } adGenFxoInterfaceStatus OBJECT IDENTIFIER ::= { adGenFxoStatus 2 } adGenFxoFindFxsMap OBJECT IDENTIFIER ::= { adGenFxoStatus 3 } --****************************************************************************** -- This table is for device-level FXO interface status. --****************************************************************************** -- No device-level status at this time. -- adGenFxoDeviceStatusTable OBJECT-TYPE -- SYNTAX SEQUENCE OF AdGenFxoDeviceStatusEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table supports retreival of device-level FXO interface status. -- Used in conjunction with adGenFxoDeviceStatus." -- ::= { adGenFxoDeviceStatus 1 } -- adGenFxoDeviceStatusEntry OBJECT-TYPE -- SYNTAX AdGenFxoDeviceStatusEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "An entry in the adGenFxoDeviceStatusTable." -- INDEX { ifIndex } -- ::= { adGenFxoDeviceStatusTable 1 } -- AdGenFxoDeviceStatusEntry ::= -- SEQUENCE -- { -- } --****************************************************************************** -- This table is for interface-level FXO status. --****************************************************************************** adGenFxoInterfaceStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenFxoInterfaceStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports retrieval of interface-level FXO status. Used in conjunction with adGenFxoInterfaceStatus." ::= { adGenFxoInterfaceStatus 1 } adGenFxoInterfaceStatusEntry OBJECT-TYPE SYNTAX AdGenFxoInterfaceStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenFxoInterfaceStatusTable." INDEX { ifIndex } ::= { adGenFxoInterfaceStatusTable 1 } AdGenFxoInterfaceStatusEntry ::= SEQUENCE { adGenFxoPortActive INTEGER, adGenFxoLoopFeed INTEGER, adGenFxoLoopState INTEGER, adGenFxoTestActive INTEGER, adGenFxoRxVoicePackets Unsigned32, adGenFxoRxControlPackets Unsigned32, adGenFxoTxVoicePackets Unsigned32, adGenFxoTxControlPackets Unsigned32, adGenFxoClearPortCounters INTEGER } adGenFxoPortActive OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes whether a call is in progress (active) or not." ::= { adGenFxoInterfaceStatusEntry 1 } adGenFxoLoopFeed OBJECT-TYPE SYNTAX INTEGER { open(1), closed(2), ringGround(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes what the interface is currently presenting to the loop." ::= { adGenFxoInterfaceStatusEntry 2 } adGenFxoLoopState OBJECT-TYPE SYNTAX INTEGER { lcf(1), rlcf(2), noBatt(3), tipOpen(4), ringing(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the current state of the loop, as it is presented to the interface. 1 = lcf Loop Current Feed (Battery). 2 = rlcf Reverse Loop Current Feed. 3 = lcfo Loop Current Feed Open (No Battery). 4 = tipOpen Tip Open (Battery present on ring lead). 5 = ringing Ringing voltage present." ::= { adGenFxoInterfaceStatusEntry 3 } adGenFxoTestActive OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes whether the interface is currently under test (active) or not." ::= { adGenFxoInterfaceStatusEntry 4 } adGenFxoRxVoicePackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the number of voice packets received from the network on this interface." ::= { adGenFxoInterfaceStatusEntry 5 } adGenFxoRxControlPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the number of control packets received from the network on this interface." ::= { adGenFxoInterfaceStatusEntry 6 } adGenFxoTxVoicePackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the number of voice packets transmitted to the network on this interface." ::= { adGenFxoInterfaceStatusEntry 7 } adGenFxoTxControlPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the number of control packets transmitted to the network on this interface." ::= { adGenFxoInterfaceStatusEntry 8 } adGenFxoClearPortCounters OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write to this object to clear all interface-level packet counters." ::= { adGenFxoInterfaceStatusEntry 9 } --****************************************************************************** -- This table is for finding links between FXO and FXS ports, indexed by -- the far-end FXS port. --****************************************************************************** adGenFxoFindFxsMapTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenFxoFindFxsMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports discovery of links between FXO and FXS ports, indexed by the far-end FXS port. (For finding links by FXO port, use adGenFxoInterfaceProvTable > adGenFxoInterfaceTargetFxsLocation." ::= { adGenFxoFindFxsMap 1 } adGenFxoFindFxsMapEntry OBJECT-TYPE SYNTAX AdGenFxoFindFxsMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenFxoFindFxsMapTable." INDEX { ifIndex, -- This is the device-level index. IMPLIED adGenFxoInterfaceFxsIndex } ::= { adGenFxoFindFxsMapTable 1 } AdGenFxoFindFxsMapEntry ::= SEQUENCE { adGenFxoInterfaceFxsIndex AdGenFxoInterfaceFxsLocation, adGenFxoInterfaceFound InterfaceIndexOrZero } adGenFxoInterfaceFxsIndex OBJECT-TYPE SYNTAX AdGenFxoInterfaceFxsLocation MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FXS Location Index." ::= { adGenFxoFindFxsMapEntry 1 } adGenFxoInterfaceFound OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the FXO port associated with the specified FXS location. A value of '0' means that a link was not found on this device." ::= { adGenFxoFindFxsMapEntry 2 } --============================================================================== -- Groups in FXO interface test --============================================================================== adGenFxoDeviceTests OBJECT IDENTIFIER ::= { adGenFxoTest 1 } adGenFxoInterfaceTests OBJECT IDENTIFIER ::= { adGenFxoTest 2 } --****************************************************************************** -- This table is for device-level FXO interface tests. --****************************************************************************** -- No device-level tests at this time. -- adGenFxoDeviceTestsTable OBJECT-TYPE -- SYNTAX SEQUENCE OF AdGenFxoDeviceTestsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table supports the use of device-level FXO tests. -- Used in conjunction with adGenFxoDeviceTests." -- ::= { adGenFxoDeviceTests 1 } -- adGenFxoDeviceTestsEntry OBJECT-TYPE -- SYNTAX AdGenFxoDeviceTestsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "An entry in the adGenFxoDeviceTestsTable." -- INDEX { ifIndex } -- ::= { adGenFxoDeviceTestsTable 1 } -- AdGenFxoDeviceTestsEntry ::= -- SEQUENCE -- { -- } --****************************************************************************** -- This table is for interface-level FXO tests. --****************************************************************************** adGenFxoInterfaceTestsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenFxoInterfaceTestsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports the use of interface-level FXO tests. Used in conjunction with adGenFxoInterfaceTests." ::= { adGenFxoInterfaceTests 1 } adGenFxoInterfaceTestsEntry OBJECT-TYPE SYNTAX AdGenFxoInterfaceTestsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenFxoInterfaceTestsTable." INDEX { ifIndex } ::= { adGenFxoInterfaceTestsTable 1 } AdGenFxoInterfaceTestsEntry ::= SEQUENCE { adGenFxoPortClearTest INTEGER, adGenFxo1004HzToneTest INTEGER, adGenFxoLoopStateTest INTEGER, adGenFxoInwardLoopbackTest INTEGER, adGenFxoOutwardLoopbackTest INTEGER } adGenFxoPortClearTest OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Write to this object to exit all running interface-level tests." ::= { adGenFxoInterfaceTestsEntry 1 } adGenFxo1004HzToneTest OBJECT-TYPE SYNTAX INTEGER { near(1), far(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to enable or disable a 1004Hz tone test. 1 = near Send tone to the loop. 2 = far Send tone to the network. 3 = disable Turn off tone." ::= { adGenFxoInterfaceTestsEntry 2 } adGenFxoLoopStateTest OBJECT-TYPE SYNTAX INTEGER { disable(1), open(2), close(3), ringGround(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes what the interface is currently presenting to the loop." ::= { adGenFxoInterfaceTestsEntry 3 } adGenFxoInwardLoopbackTest OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to enable or disable a loopback towards the backplane." ::= { adGenFxoInterfaceTestsEntry 4 } adGenFxoOutwardLoopbackTest OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to enable or disable a loopback towards the loop." ::= { adGenFxoInterfaceTestsEntry 5 } --============================================================================== -- Groups in FXO interface alarms --============================================================================== --No Fxo specific alarms defined at this time. --adGenFxoAlarmEvents OBJECT IDENTIFIER ::= { adGenFxoAlarms 0 } END