ADTRAN-GENERIC-LLDP-MIB -- TITLE: Adtran Generic LLDP MIB -- PRODUCT: TA5000 -- VERSION: 1.0 -- DATE: Oct. 18th, 2011 -- AUTHOR: John R. Allegra -- STATUS: Created -- DEFINITIONS ::= BEGIN IMPORTS adGenLldp, adGenLldpID FROM ADTRAN-SHARED-CND-SYSTEM-MIB InterfaceIndex, ifIndex FROM IF-MIB OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, IpAddress FROM SNMPv2-SMI TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB adTrapInformSeqNum FROM ADTRAN-GENTRAPINFORM-MIB sysName FROM SNMPv2-MIB; adGenLldpMIB MODULE-IDENTITY LAST-UPDATED "201309180000Z" ORGANIZATION "Adtran, Inc." CONTACT-INFO "CND Tech Support Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "This MIB defines the objects for the Generic LLDP MIB." REVISION "201309180000Z" DESCRIPTION "Added traps adGenLldpPeerAdded and adGenLldpPeerRemoved." REVISION "201110180000Z" DESCRIPTION "Created" ::= { adGenLldpID 1 } -- /////////////////////////////////////////////////////// -- Operation Groups -- /////////////////////////////////////////////////////// adGenLldpConfiguration OBJECT IDENTIFIER ::= { adGenLldp 1 } adGenLldpStatistics OBJECT IDENTIFIER ::= { adGenLldp 2 } adGenLldpLocalSystemData OBJECT IDENTIFIER ::= { adGenLldp 3 } adGenLldpRemoteSystemData OBJECT IDENTIFIER ::= { adGenLldp 4 } adGenLldpExtentsions OBJECT IDENTIFIER ::= { adGenLldp 5 } adGenLldpEvents OBJECT IDENTIFIER ::= { adGenLldp 6 } adGenLldpTraps OBJECT IDENTIFIER ::= { adGenLldpEvents 0 } -- -- *********************************************************** -- -- Textual Conventions -- -- *********************************************************** AdGenChassisIdSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value." SYNTAX INTEGER { chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) } AdGenChassisId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the format of a chassis identifier string. Objects of this type are always used with an associated AdGenChassisIdSubtype object, which identifies the format of the particular AdGenChassisId object instance. If the associated AdGenChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated AdGenChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated AdGenChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated AdGenChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated AdGenChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated AdGenChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated AdGenChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID." SYNTAX OCTET STRING (SIZE (1..255)) AdGenPortIdSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The enumeration 'portComponent(2)' represents a port identifier based on the value of entPhysicalAlias (defined in IETF RFC 2737) for a port component (i.e., entPhysicalClass value of 'port(10)'), within the containing chassis. The enumeration 'macAddress(3)' represents a port identifier based on a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), which has been detected by the agent and associated with a particular port (IEEE Std 802-2001). The enumeration 'networkAddress(4)' represents a port identifier based on a network address, detected by the agent and associated with a particular port. The enumeration 'interfaceName(5)' represents a port identifier based on the ifName MIB object, defined in IETF RFC 2863. The enumeration 'agentCircuitId(6)' represents a port identifier based on the agent-local identifier of the circuit (defined in RFC 3046), detected by the agent and associated with a particular port. The enumeration 'local(7)' represents a port identifier based on a value locally assigned." SYNTAX INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } AdGenPortId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the format of a port identifier string. Objects of this type are always used with an associated AdGenPortIdSubtype object, which identifies the format of the particular AdGenPortId object instance. If the associated AdGenPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated AdGenPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated AdGenPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated AdGenPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated AdGenPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated AdGenPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated AdGenPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID." SYNTAX OCTET STRING (SIZE (1..255)) AdGenManAddrIfSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention." SYNTAX INTEGER { unknown(1), ifIndex(2), systemPortNumber(3) } AdGenManAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such as SNMP engineId, may be required to access the LLDP agent using a management address. These necessary credentials should be known by the network management and the objects associated with the credentials are not included in the LLDP agent." SYNTAX OCTET STRING (SIZE (1..31)) AdGenSystemCapabilitiesMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else." SYNTAX BITS { other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7) } -- -- *********************************************************** -- -- L L D P C O N F I G -- -- (adGenLldpConfiguration) -- -- *********************************************************** adGenLldpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenLldpProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provisioning table." ::= { adGenLldpConfiguration 1 } -- ///////////////////////////////////////////////////////// adGenLldpProvEntry OBJECT-TYPE SYNTAX AdGenLldpProvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table Entry." INDEX { ifIndex } ::= { adGenLldpProvTable 1 } -- ///////////////////////////////////////////////////////// AdGenLldpProvEntry ::= SEQUENCE { adGenLldpConfigState INTEGER } -- ///////////////////////////////////////////////////////// adGenLldpConfigState OBJECT-TYPE SYNTAX INTEGER { txOnly(1), rxOnly(2), txAndRx(3), disabled(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit LLDP frames on this port and it will not store any information about the remote systems connected. If the associated lldpPortConfigAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent will receive, but it will not transmit LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent will transmit and receive LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or process LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's lldpPortConfigAdminStatus becomes disabled, then the information will naturally age out." ::= { adGenLldpProvEntry 1 } -- *********************************************************** -- -- L L D P S T A T S -- -- *********************************************************** -- *********************************************************** -- -- L O C A L S Y S T E M D A T A -- -- *********************************************************** -- *********************************************************** -- -- R E M O T E S Y S T E M S D A T A -- -- (adGenLldpRemoteSystemData) -- -- *********************************************************** adGenLldpRemSysDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenLldpRemSysDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provisioning table." ::= { adGenLldpRemoteSystemData 1 } -- ///////////////////////////////////////////////////////// adGenLldpRemSysDataEntry OBJECT-TYPE SYNTAX AdGenLldpRemSysDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table Entry." INDEX { ifIndex } ::= { adGenLldpRemSysDataTable 1 } -- ///////////////////////////////////////////////////////// AdGenLldpRemSysDataEntry ::= SEQUENCE { adGenLldpRemChassisIdSubtype AdGenChassisIdSubtype, adGenLldpRemChassisId AdGenChassisId, adGenLldpRemPortIdSubtype AdGenPortIdSubtype, adGenLldpRemPortId AdGenPortId, adGenLldpRemPortDesc SnmpAdminString, adGenLldpRemSysName SnmpAdminString, adGenLldpRemSysDesc SnmpAdminString, adGenLldpRemSysCapSupported AdGenSystemCapabilitiesMap, adGenLldpRemSysCapEnabled AdGenSystemCapabilitiesMap, adGenLldpRemManAddrSubtype AddressFamilyNumbers, adGenLldpRemManAddr AdGenManAddress, adGenLldpRemManAddrIfSubtype AdGenManAddrIfSubtype, adGenLldpRemManAddrIfId Integer32 } -- ///////////////////////////////////////////////////////// adGenLldpRemChassisIdSubtype OBJECT-TYPE SYNTAX AdGenChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "The type of encoding used to identify the chassis associated with the remote system." ::= { adGenLldpRemSysDataEntry 1 } -- ///////////////////////////////////////////////////////// adGenLldpRemChassisId OBJECT-TYPE SYNTAX AdGenChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the chassis component associated with the remote system." ::= { adGenLldpRemSysDataEntry 2 } -- ///////////////////////////////////////////////////////// adGenLldpRemPortIdSubtype OBJECT-TYPE SYNTAX AdGenPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "The type of port identifier encoding used in the associated 'adGenLldpRemPortId' object." ::= { adGenLldpRemSysDataEntry 3 } -- ///////////////////////////////////////////////////////// adGenLldpRemPortId OBJECT-TYPE SYNTAX AdGenPortId MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the port component associated with the remote system." ::= { adGenLldpRemSysDataEntry 4 } -- ///////////////////////////////////////////////////////// adGenLldpRemPortDesc OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the description of the given port associated with the remote system." ::= { adGenLldpRemSysDataEntry 5 } -- ///////////////////////////////////////////////////////// adGenLldpRemSysName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the system name of the remote system." ::= { adGenLldpRemSysDataEntry 6 } -- ///////////////////////////////////////////////////////// adGenLldpRemSysDesc OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the system description of the remote system." ::= { adGenLldpRemSysDataEntry 7 } -- ///////////////////////////////////////////////////////// adGenLldpRemSysCapSupported OBJECT-TYPE SYNTAX AdGenSystemCapabilitiesMap MAX-ACCESS read-only STATUS current DESCRIPTION "The bitmap value used to identify which system capabilities are supported on the remote system." ::= { adGenLldpRemSysDataEntry 8 } -- ///////////////////////////////////////////////////////// adGenLldpRemSysCapEnabled OBJECT-TYPE SYNTAX AdGenSystemCapabilitiesMap MAX-ACCESS read-only STATUS current DESCRIPTION "The bitmap value used to identify which system capabilities are enabled on the remote system." ::= { adGenLldpRemSysDataEntry 9 } -- ///////////////////////////////////////////////////////// adGenLldpRemManAddrSubtype OBJECT-TYPE SYNTAX AddressFamilyNumbers MAX-ACCESS read-only STATUS current DESCRIPTION "The type of management address identifier encoding used in the associated 'adGenLldpRemManagmentAddr' object." ::= { adGenLldpRemSysDataEntry 10 } -- ///////////////////////////////////////////////////////// adGenLldpRemManAddr OBJECT-TYPE SYNTAX AdGenManAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity." ::= { adGenLldpRemSysDataEntry 11 } -- ///////////////////////////////////////////////////////// adGenLldpRemManAddrIfSubtype OBJECT-TYPE SYNTAX AdGenManAddrIfSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system." ::= { adGenLldpRemSysDataEntry 12 } -- ///////////////////////////////////////////////////////// adGenLldpRemManAddrIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The integer value used to identify the interface number regarding the management address component associated with the remote system." ::= { adGenLldpRemSysDataEntry 13 } --============================================================================== --============================================================================== --============================================================================== adGenLldpPeerRemoved NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, ifIndex } STATUS current DESCRIPTION "This trap indicates that a LLDP peer has been removed." --#TYPE "Status - Event" --#SUMMARY "LLDP 1: LLDP Peer Removed" --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Provisioning Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adGenLldpTraps 1 } adGenLldpPeerAdded NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, ifIndex } STATUS current DESCRIPTION "This trap indicates that a LLDP peer has been added." --#TYPE "Status - Event" --#SUMMARY "LLDP 2: LLDP Peer Added" --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Provisioning Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adGenLldpTraps 2 } END