ADTRAN-GENDS3TEST-MIB DEFINITIONS ::= BEGIN -- TITLE: Generic DS3 TEST MIB -- PRODUCT: All ADTRAN DS3 PRODUCTS -- VERSION: 1.0 -- DATE: 4/10/2008 -- AUTHOR: Tim Cox -- STATUS: PRELIMINARY -- MIB ARC: adtran.adShared.adGenDS3Test -- HISTORY: -- 04/10/08 twc STATUS: PRELIMINARY. -- 04/24/08 jlb Cleaned up compiling errors. Linked the MIB into the adDS3 shared branch of the MIB tree. -- Fixed some data type mismatches. Added the MIB groups. -- 05/05/08 jlb Changed some data types to make more sense. -- 06/19/08 jlb Fixed compiler errors. -- ****************************************************************************************** IMPORTS Gauge32, TimeTicks, Unsigned32, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF sysName FROM SNMPv2-MIB DisplayString FROM SNMPv2-TC ifIndex FROM IF-MIB adTrapInformSeqNum FROM ADTRAN-GENTRAPINFORM-MIB adGenSlotInfoIndex FROM ADTRAN-GENSLOT-MIB adGenPortTrapIdentifier FROM ADTRAN-GENPORT-MIB adGenDS3Test, adGenDS3TestID FROM ADTRAN-SHARED-DS3-MIB ; -- DS3 Test Group adGenDS3TestIdentity MODULE-IDENTITY LAST-UPDATED "200804100000Z" ORGANIZATION "Adtran, Inc." CONTACT-INFO "http://www.adtran.com" DESCRIPTION "The MIB module describing generic objects used for DS3 testing for any DS3 product developed by ADTRAN, Inc." REVISION "200804100000Z" DESCRIPTION "Created" ::= { adGenDS3TestID 1 } -- OBJECT IDENTIFIERS --adGenDS3TestIndex OBJECT IDENTIFIER ::= {adGenDS3Test 1} adGenDS3TestCommand OBJECT IDENTIFIER ::= {adGenDS3Test 2} adGenDS3TestNearEndLoopback OBJECT IDENTIFIER ::= {adGenDS3Test 3} adGenDS3TestFarEndLoopback OBJECT IDENTIFIER ::= {adGenDS3Test 4} adGenDS3TestPattern OBJECT IDENTIFIER ::= {adGenDS3Test 5} adGenDS3TestMibConformance OBJECT IDENTIFIER ::= {adGenDS3Test 6} adGenDS3TestMibGroups OBJECT IDENTIFIER ::= {adGenDS3TestMibConformance 1 } --adGenDS3TestAlarmsPrefix OBJECT IDENTIFIER ::= {adGenDS3Test 10} --adGenDS3TestAlarms OBJECT IDENTIFIER ::= {adGenDS3TestAlarmsPrefix 0} -- ****************************************************************************************** -- Index -- ****************************************************************************************** -- ****************************************************************************************** -- DS3 Test Command Table -- ****************************************************************************************** adGenDS3TestCommandTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenDS3TestCommandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports DS3 test command parameters." ::= { adGenDS3TestCommand 1 } adGenDS3TestCommandEntry OBJECT-TYPE SYNTAX AdGenDS3TestCommandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenDS3TestCommandTable." INDEX { ifIndex } ::= { adGenDS3TestCommandTable 1 } AdGenDS3TestCommandEntry ::= SEQUENCE { adGenDS3TestTimeout Integer32, adGenDS3TestStartStop INTEGER, adGenDS3TestStatus INTEGER, adGenDS3TestTimeRemaining Unsigned32, adGenDS3TestTimeElapsed Unsigned32 } adGenDS3TestTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "- This object defines the number of minutes that any near end or any far end test will be run. - Any locally initiated loopback or BERT, any local response to a remotely requested loopback, and any local request for a far end loopback are all considered tests. - Unless a customer requires otherwise, this value will be programmed from 0 to 9999 minutes. This allows a reasonable 6+ days for a test and reasonably limits the required display space on GUIs. - A value of 0 disables the timeout so that a test will run indefinitely, if not manually stopped." ::= { adGenDS3TestCommandEntry 1 } adGenDS3TestStartStop OBJECT-TYPE SYNTAX INTEGER { nearEndStart(1), farEndStart(2), allStop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " nearEndStart - INITIALIZES and starts any near end test and counters farEndStart - INITIALIZES and starts any far end test and counters allStop - terminates all tests and freezes status counters of all tests." ::= { adGenDS3TestCommandEntry 2 } adGenDS3TestStatus OBJECT-TYPE SYNTAX INTEGER { none(1), nearEndLine(2), nearEndPayload(3), nearEndLineFEAC(4), farEndPatt2to23(5), farEndPatt2to20(6), farEndPatt2to15(7), farEndPatt2to23LineLpbk(8), farEndPatt2to20LineLpbk(9), farEndPatt2to15LineLpbk(10), farEndLineLpbk(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "None – no near end and no far end tests are in progress. NearEndLineLpbk – a near end locally initiated DS3 line loopback test is in progress. NearEndPayloadLpbk – a near end locally initiated DS3 payload loopback test is in progress. NearEndLineFEACLpbk – an incoming FEAC containing the DS3 Line Loopback request initiatedthe DS3 line loopback that is currently in progress. FarEndPatt2to23 – XNOR of 18th and 23rd stage outputs feed back into 1st stage input. FarEndPatt2to20 - XOR of 17th and 20th stage outputs feed back into 1st stage input. FarEndPatt2to15 – XNOR of 14th and 15th stage outputs feed back into 1st stage input. farEndPatt2to23LineLpbk - both far end 2^23 and far end DS3 line loopback are progress. farEndPatt2to20LineLpbk - both far end 2^20 and far end DS3 line loopback are progress. farEndPatt2to15LineLpbk - both far end 2^15 and far end DS3 line loopback are progress." ::= { adGenDS3TestCommandEntry 3 } adGenDS3TestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Initialized to adGenDS3TestTimeout upon reception of a Start object. 0 – occurs when near end test has ended. 0 – occurs when near end test is in progress, but timeout has been disabled. >0 – occurs when near end test is in progress, but timeout has not been disabled." ::= { adGenDS3TestCommandEntry 4 } adGenDS3TestTimeElapsed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "0 - initialization value at instance a test starts. >0 – occurs when near end test is in progress or just ended." ::= { adGenDS3TestCommandEntry 5 } -- ****************************************************************************************** -- DS3 Test Near End Loopback Table -- ****************************************************************************************** adGenDS3TestNearEndLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenDS3TestNearEndLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports DS3 Test Near End Loopback parameters." ::= { adGenDS3TestNearEndLoopback 1 } adGenDS3TestNearEndLoopbackEntry OBJECT-TYPE SYNTAX AdGenDS3TestNearEndLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenDS3TestNearEndLoopbackTable." INDEX { ifIndex } ::= { adGenDS3TestNearEndLoopbackTable 1 } AdGenDS3TestNearEndLoopbackEntry ::= SEQUENCE { adGenDS3TestNearEndLoopbackType INTEGER } adGenDS3TestNearEndLoopbackType OBJECT-TYPE SYNTAX INTEGER { line(1), payload(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "- This object selects the near end loopback that will be executed upon recognition of a start test. - This object should be ignored if issued while any test is in progress. - line - indicates that the incoming DS3 will be looped back at a point such that the outgoing positive and negative pulses correlate with the polarity of the incoming positive and negative pulses. - payload - indicates that the incoming DS3 payload will be looped back toward the DS3 interface, while the outgoing overhead will be regenerated by a DS3 transmit framer." ::= { adGenDS3TestNearEndLoopbackEntry 1 } -- ****************************************************************************************** -- DS3 Test Far End Loopback Table -- ****************************************************************************************** adGenDS3TestFarEndLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenDS3TestFarEndLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports DS3 Test Far End Loopback parameters." ::= { adGenDS3TestFarEndLoopback 1 } adGenDS3TestFarEndLoopbackEntry OBJECT-TYPE SYNTAX AdGenDS3TestFarEndLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenDS3TestFarEndLoopbackTable." INDEX { ifIndex } ::= { adGenDS3TestFarEndLoopbackTable 1 } AdGenDS3TestFarEndLoopbackEntry ::= SEQUENCE { adGenDS3TestFarEndLpbkType INTEGER, adGenDS3TestFarEndFEACRequest INTEGER } adGenDS3TestFarEndLpbkType OBJECT-TYPE SYNTAX INTEGER { none(1), line(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "- This object selects the far end loopback that will be executed upon recognition of the adGenDS3TestFarEndStart object. - This object should be ignored if issued while any test is in progress. - none - indicates that no DS3 Line Loopback request will be issued via FEAC upon recognition of the adGenDS3TestFarEndStart object. - line – indicates that DS3 Line Loopback request will be issued via FEAC upon recognition of the adGenDS3TestFarEndStart object." ::= { adGenDS3TestFarEndLoopbackEntry 1 } adGenDS3TestFarEndFEACRequest OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the response to income FEAC Line Loopback request." ::= { adGenDS3TestFarEndLoopbackEntry 2 } -- ****************************************************************************************** -- DS3 Test Pattern Table -- ****************************************************************************************** adGenDS3TestPatternTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenDS3TestPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table supports DS3 Test Pattern parameters." ::= { adGenDS3TestPattern 1 } adGenDS3TestPatternEntry OBJECT-TYPE SYNTAX AdGenDS3TestPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adGenDS3TestPatternTable." INDEX { ifIndex } ::= { adGenDS3TestPatternTable 1 } AdGenDS3TestPatternEntry ::= SEQUENCE { adGenDS3TestPatternType INTEGER, adGenDS3TestPatternSync INTEGER, adGenDS3TestPatternErrorsRcvd Gauge32, adGenDS3TestPatternInsertError INTEGER, adGenDS3TestPatternResetCount INTEGER } adGenDS3TestPatternType OBJECT-TYPE SYNTAX INTEGER { patt2to23(1), patt2to20(2), patt2to15(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object selects the DS3 BERT that will be generated and detected upon recognition of a start command. patt2to23 – XNOR of 18th and 23rd stage outputs feed back into 1st stage input. patt2to20 - XOR of 17th and 20th stage outputs feed back into 1st stage input. patt2to15 – XNOR of 14th and 15th stage outputs feed back into 1st stage input." ::= { adGenDS3TestPatternEntry 1 } adGenDS3TestPatternSync OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " true – pattern test is in progress and incoming test pattern is in sync; pattern test ended while incoming test pattern was in sync. false – pattern test is in progress and incoming test pattern is out of sync; pattern test ended while incoming test pattern was out of sync; default if no test has ever been run." ::= { adGenDS3TestPatternEntry 2 } adGenDS3TestPatternErrorsRcvd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "0 – initialization value when pattern test starts. >0 – increments for each logic error that occurs when pattern test is in progress AND while incoming test pattern is in sync; maintains value when pattern test ends." ::= { adGenDS3TestPatternEntry 3 } adGenDS3TestPatternInsertError OBJECT-TYPE SYNTAX INTEGER { insert(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "- Upon each reception of this object, 1 logic error is injected into DS3 payload if a pattern test is in progress. - The logic error is injected PRIOR to parity calculation." ::= { adGenDS3TestPatternEntry 4 } adGenDS3TestPatternResetCount OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "- Upon each reception of this object, the pattern error counter is reset to 0 if a far end pattern test is in progress." ::= { adGenDS3TestPatternEntry 5 } -- ****************************************************************************************** -- MIB Groups -- ****************************************************************************************** adGenDS3TestGroup OBJECT-GROUP OBJECTS { adGenDS3TestTimeout, adGenDS3TestStartStop, adGenDS3TestStatus, adGenDS3TestTimeRemaining, adGenDS3TestTimeElapsed, adGenDS3TestNearEndLoopbackType, adGenDS3TestFarEndLpbkType, adGenDS3TestPatternType, adGenDS3TestPatternSync, adGenDS3TestPatternErrorsRcvd, adGenDS3TestPatternInsertError, adGenDS3TestPatternResetCount } STATUS current DESCRIPTION "These objects provide support for DS3 test procedures." ::= { adGenDS3TestMibGroups 1 } END