ADTRAN-AOS-POE-STATUS-INFO-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB adIdentity FROM ADTRAN-MIB adGenAOSConformance, adGenAOSSwitch FROM ADTRAN-AOS; adGenAOSPoEStatusInfo MODULE-IDENTITY LAST-UPDATED "201807150000Z" -- July 15, 2018 / YYYYMMDDHHMMZ ORGANIZATION "ADTRAN, Inc." CONTACT-INFO "Technical Support Dept. Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "This MIB is used to manage Power Over Ethernet information." REVISION "201807150000Z" -- July 15, 2018 / YYYYMMDDHHMMZ DESCRIPTION "First Draft of ADTRAN-AOS-POE-STATS MIB module." ::= { adIdentity 10000 53 4 2 } adGenAOSPoEMon OBJECT IDENTIFIER ::= { adGenAOSSwitch 3 } adGenAOSPoESysInfo OBJECT IDENTIFIER ::= { adGenAOSPoEMon 1 } adGenAOSPoEPortInfo OBJECT IDENTIFIER ::= { adGenAOSPoEMon 2 } -- ======================================================================== adGenAOSPoEPseTotalPower OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Total power of the power source ethernet(PSE) device and expressed in Watts." ::= { adGenAOSPoESysInfo 1 } adGenAOSPoEPseTotalPowerUsed OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Total power used of the power source ethernet(PSE) device and expressed in Watts." ::= { adGenAOSPoESysInfo 2 } adGenAOSPoEPseTotalPowerAvailable OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Total power available of the power source ethernet(PSE) device and expressed in Watts." ::= { adGenAOSPoESysInfo 3 } adGenAOSPoEPseAverageTotalPowerUsed OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Average total power used of the power source ethernet(PSE) device and expressed in Watts." ::= { adGenAOSPoESysInfo 4 } adGenAOSPoEPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSPoEPortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-only objects in this table." ::= { adGenAOSPoEPortInfo 1 } adGenAOSPoEPortInfoTableEntry OBJECT-TYPE SYNTAX AdGenAOSPoEPortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device." INDEX { ifIndex} ::= { adGenAOSPoEPortInfoTable 1 } AdGenAOSPoEPortInfoTableEntry ::= SEQUENCE { adGenAOSPoEPsePortIfName DisplayString, adGenAOSPoEPsePortPowerAdminMode DisplayString, adGenAOSPoEPsePortPowerStatusMode INTEGER, adGenAOSPoEPsePortPowerUsed DisplayString, adGenAOSPoEPsePortPowerClassifications INTEGER, adGenAOSPoEPsePortVoltage DisplayString, adGenAOSPoEPsePortCurrent DisplayString, adGenAOSPoEPsePortMaxPower DisplayString, adGenAOSPoEPsePortAveragePower DisplayString } adGenAOSPoEPsePortIfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software." ::= { adGenAOSPoEPortInfoTableEntry 1 } adGenAOSPoEPsePortPowerAdminMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An interface which can provide the PSE functions like, auto, legacy, 2-point, 4-point, force-power, and off " ::= { adGenAOSPoEPortInfoTableEntry 2 } adGenAOSPoEPsePortPowerStatusMode OBJECT-TYPE SYNTAX INTEGER { limited(1), delivering(2), searching(3), fault(4), denied(5), disabledThermal(6), disabled(7), otherFault(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the operational status of the port PD detection. limited(1)- indicates that the PSE State diagram is in the state Limited. delivering(2) - indicates that the PSE State diagram is in the state POWER_ON for a duration greater than tlim max (see IEEE Std 802.3af Table 33-5 tlim) searching(3)- indicates the PSE State diagram is in a state other than those listed above. fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. denied(5) - indicates that the PSE State diagram is in the state Denied. disabledThermal(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. disabled(7)- indicates that the PSE State diagram is in the state DISABLED otherFault(8)- indicates that the PSE State diagram in the IDLE state due to the variable error_conditions. Note: 'Limited' status is only valid for PoE+ devices that negotiate power using LLDP. " ::= { adGenAOSPoEPortInfoTableEntry 3 } adGenAOSPoEPsePortPowerUsed OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Port power usage in watts of a power source ethernet(PSE) device." ::= { adGenAOSPoEPortInfoTableEntry 4 } adGenAOSPoEPsePortPowerClassifications OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4), class4(5), notApplicable(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute adGenAOSPoEPsePortPowerStatusMode is reporting delivering." REFERENCE "IEEE Std 802.3af Section 30.9.1.1.6 aPSEPowerClassification" ::= { adGenAOSPoEPortInfoTableEntry 5 } adGenAOSPoEPsePortVoltage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "Port power in volts of a power source ethernet(PSE) device." ::= { adGenAOSPoEPortInfoTableEntry 6 } adGenAOSPoEPsePortCurrent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "mA" MAX-ACCESS read-only STATUS current DESCRIPTION "Port current power in milliamps of a power source ethernet(PSE) device." ::= { adGenAOSPoEPortInfoTableEntry 7 } adGenAOSPoEPsePortMaxPower OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Port maximum power in watts of a power source ethernet(PSE) device." ::= { adGenAOSPoEPortInfoTableEntry 8 } adGenAOSPoEPsePortAveragePower OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "Port average power usage in watts of a power source ethernet(PSE) device." ::= { adGenAOSPoEPortInfoTableEntry 9 } -- Conformance information adGenAOSPowerOverEthernetConformance OBJECT IDENTIFIER ::= { adGenAOSConformance 35 } adGenAOSPowerOverEthernetGroups OBJECT IDENTIFIER ::= { adGenAOSPowerOverEthernetConformance 1 } adGenAOSPowerOverEthernetCompliances OBJECT IDENTIFIER ::= { adGenAOSPowerOverEthernetConformance 2 } -- Compliance Statements adGenAOSPowerOverEthernetFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement version 2 of the adGenAOSPoEStatusInfo MIB. When this MIB is fully implemented, then such an implementation can claim full compliance." MODULE MANDATORY-GROUPS { adGenAOSPoESysInfoGroup, adGenAOSPoEPortInfoGroup } ::= { adGenAOSPowerOverEthernetCompliances 1 } -- Units of conformance -- adGenAOSPoESysInfoGroup OBJECT-GROUP OBJECTS { adGenAOSPoEPseTotalPower, adGenAOSPoEPseTotalPowerUsed, adGenAOSPoEPseTotalPowerAvailable, adGenAOSPoEPseAverageTotalPowerUsed } STATUS current DESCRIPTION "The PoE Port System Info Group." ::= { adGenAOSPowerOverEthernetGroups 1 } adGenAOSPoEPortInfoGroup OBJECT-GROUP OBJECTS { adGenAOSPoEPsePortIfName, adGenAOSPoEPsePortPowerAdminMode, adGenAOSPoEPsePortPowerStatusMode, adGenAOSPoEPsePortPowerUsed, adGenAOSPoEPsePortPowerClassifications, adGenAOSPoEPsePortVoltage, adGenAOSPoEPsePortCurrent, adGenAOSPoEPsePortMaxPower, adGenAOSPoEPsePortAveragePower } STATUS current DESCRIPTION "The PoE Port Info Group." ::= { adGenAOSPowerOverEthernetGroups 2 } END