-- -- Accedian Enterprise Specific MIB -- -- Copyright (c) 2005-2008, Accedian Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- ACD-SMAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF acdMibs FROM ACCEDIAN-SMI; acdSmap MODULE-IDENTITY LAST-UPDATED "201305110100Z" ORGANIZATION "Accedian Networks, Inc." CONTACT-INFO "Accedian Technical Assistance Center Accedian Networks, Inc. 2351 Alfred-Nobel blvd., Suite N-410 Saint-Laurent, Quebec Canada H4S 2A9 E-mail: support@accedian.com" DESCRIPTION "The Service mapping database for this Accedian Networks device." REVISION "201305110100Z" -- 11 April 2013 DESCRIPTION "Add port cos mapping tables." REVISION "200810010100Z" -- 1 October 2008 DESCRIPTION "Definition revision." REVISION "200806150100Z" -- 15 June 2008 DESCRIPTION "Initial version of MIB module ACD-SMAP-MIB." ::= { acdMibs 8 } acdSmapNotifications OBJECT IDENTIFIER ::= { acdSmap 0 } acdSmapMIBObjects OBJECT IDENTIFIER ::= { acdSmap 1 } acdSmapConformance OBJECT IDENTIFIER ::= { acdSmap 2 } acdSmapConfig OBJECT IDENTIFIER ::= { acdSmapMIBObjects 1 } --------------------------------------------------------------------------- -- The CoS Profile configuration table -- This table contains all CoS Profile entry configurations. --------------------------------------------------------------------------- acdSmapCoSProfTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdSmapCoSProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CoS profile table. Each row in the table represents a CoS Profile. A CoS profile is used to map an input packet to an L2 class of service. This traffic mapping (classification) is accomplished using one of the following fields in the incoming packet: p-bits in 802.1Q / 802.1Q-in-Q tags IP precedence bits in IPv4 TOS byte DSCP bits in IPv4 DSCP byte The class of service value (0-7) assigned to the outgoing traffic is selected based on the conformance level (Green/Yellow) of the incoming traffic. The following sections describe the general configuration parameters and the mapping table of a CoS profile." ::= { acdSmapConfig 1 } acdSmapCoSProfEntry OBJECT-TYPE SYNTAX AcdSmapCoSProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a CoS profile." INDEX { acdSmapCoSProfID } ::= { acdSmapCoSProfTable 1 } AcdSmapCoSProfEntry ::= SEQUENCE { acdSmapCoSProfID Unsigned32, acdSmapCoSProfRowStatus RowStatus, acdSmapCoSProfName DisplayString, acdSmapCoSProfType INTEGER, acdSmapCoSProfDecodeDropBit TruthValue, acdSmapCoSProfEncodeDropBit TruthValue } acdSmapCoSProfID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each CoS Profile instance." ::= { acdSmapCoSProfEntry 1 } acdSmapCoSProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "All columns must have a valid value before a row can be activated. To create a new CoS Profile you shall provide the a unique name and the type for an empty row with the RowStatus set to Create and Go. To delete the CoS Profile you need to set the RowStatus to destroy." ::= { acdSmapCoSProfEntry 2 } acdSmapCoSProfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is a string to uniquely identify the CoS profile." ::= { acdSmapCoSProfEntry 3 } acdSmapCoSProfType OBJECT-TYPE SYNTAX INTEGER { pcp(1), dscp(2), pre(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of CoS profile. Possible values are: PCP, IP precedence or DSCP." ::= { acdSmapCoSProfEntry 4 } acdSmapCoSProfDecodeDropBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This field is only valid for PCP CoS profiles. If this field is set, the pre-marking color is decoded from the DEI bit (Drop Eligible Indication). Otherwise, the user defined pre-color is used." DEFVAL { false } ::= { acdSmapCoSProfEntry 5 } acdSmapCoSProfEncodeDropBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This field controls the DEI bit in an S-VLAN tag. If this field is set and the outgoing packet is marked yellow then the DEI bit is set to 1. Otherwise, the DEI is set to 0." DEFVAL { false } ::= { acdSmapCoSProfEntry 6 } --------------------------------------------------------------------------- -- The CoS Profile Code Point configuration table -- This table contains all Code Point for a CoS profile entry. --------------------------------------------------------------------------- acdSmapCoSProfCodePointTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdSmapCoSProfCodePointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Configuration table of all code point entries. Each row in the table represents a Code point. the number of code points depend of the acdSmapCoSProfType value. p-bits in 802.1Q / 802.1Q-in-Q tags IP precedence bits in IPv4 TOS byte DSCP bits in IPv4 DSCP byte The class of service value (0-7) assigned to the outgoing traffic is selected based on the conformance level (Green/Yellow) of the incoming traffic." ::= { acdSmapConfig 2 } acdSmapCoSProfCodePointEntry OBJECT-TYPE SYNTAX AcdSmapCoSProfCodePointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings for a code point." INDEX { acdSmapCoSProfID, acdSmapCoSProfCodePointID } ::= { acdSmapCoSProfCodePointTable 1 } AcdSmapCoSProfCodePointEntry ::= SEQUENCE { acdSmapCoSProfCodePointID Unsigned32, acdSmapCoSProfCodePointPreMarkingColor INTEGER, acdSmapCoSProfCodePointGreenOut Unsigned32, acdSmapCoSProfCodePointYellowOut Unsigned32 } acdSmapCoSProfCodePointID OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each row. Base on Code Point, 0 to 63 for DSCP or 0 to 7 for PCP or IP precedence." ::= { acdSmapCoSProfCodePointEntry 1 } acdSmapCoSProfCodePointPreMarkingColor OBJECT-TYPE SYNTAX INTEGER { green(1), yellow(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the user pre-color to mark the incoming traffic. This field is only valid if acdSmapCoSProfDecodeDropBit is not set." DEFVAL { green } ::= { acdSmapCoSProfCodePointEntry 2 } acdSmapCoSProfCodePointGreenOut OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The class of service value that will be used in the outgoing green packets. This value is selected if the result of the bandwidth regulator assigned to this entry is green or if the pre-marking color is green and no bandwidth regulator is assigned to this entry." DEFVAL { 0 } ::= { acdSmapCoSProfCodePointEntry 3 } acdSmapCoSProfCodePointYellowOut OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The class of service value that will be used in the outgoing yellow packets. This value is selected if the result of the bandwidth regulator assigned to this entry is yellow or if the pre-marking color is yellow and no bandwidth regulator is assigned to this entry." DEFVAL { 0 } ::= { acdSmapCoSProfCodePointEntry 4 } --------------------------------------------------------------------------- -- The Regulator Set configuration table -- This table contains all Regulator Set entry configurations. --------------------------------------------------------------------------- acdSmapRegSetTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdSmapRegSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Regulator Set profile table. Each row in the table represents a Regulator Set. A bandwidth regulator set allows the user to regulate traffic based on the following information: p-bits in 802.1Q / 802.1Q-in-Q tags IP precedence bits in IPv4 TOS byte DSCP bits in IPv4 DSCP byte. " ::= { acdSmapConfig 3 } acdSmapRegSetEntry OBJECT-TYPE SYNTAX AcdSmapRegSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a Regulator set." INDEX { acdSmapRegSetID } ::= { acdSmapRegSetTable 1 } AcdSmapRegSetEntry ::= SEQUENCE { acdSmapRegSetID Unsigned32, acdSmapRegSetRowStatus RowStatus, acdSmapRegSetName DisplayString, acdSmapRegSetType INTEGER } acdSmapRegSetID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Regulator set instance." ::= { acdSmapRegSetEntry 1 } acdSmapRegSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "All columns must have a valid value before a row can be activated. To create a new Regulator set you shall provide the a unique name and the type for an empty row with the RowStatus set to Create and Go. To delete the CoS Profile you need to set the RowStatus to destroy." ::= { acdSmapRegSetEntry 2 } acdSmapRegSetName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is a string to uniquely identify the Regulator set." ::= { acdSmapRegSetEntry 3 } acdSmapRegSetType OBJECT-TYPE SYNTAX INTEGER { pcp(1), dscp(2), pre(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of Regulator Set. Possible values are: PCP, IP precedence or DSCP." ::= { acdSmapRegSetEntry 4 } --------------------------------------------------------------------------- -- The Regulator Set Code Point configuration table -- This table contains all Code Point for a Regulator set profile entry. --------------------------------------------------------------------------- acdSmapRegSetCodePointTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdSmapRegSetCodePointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Configuration table of all code point entries. Each row in the table represents a Code point. the number of code points depend of the acdSmapCoSProfType value. p-bits in 802.1Q / 802.1Q-in-Q tags; IP precedence bits in IPv4 TOS byte; DSCP bits in IPv4 DSCP byte. " ::= { acdSmapConfig 4 } acdSmapRegSetCodePointEntry OBJECT-TYPE SYNTAX AcdSmapRegSetCodePointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings for a code point." INDEX { acdSmapRegSetID, acdSmapRegSetCodePointID } ::= { acdSmapRegSetCodePointTable 1 } AcdSmapRegSetCodePointEntry ::= SEQUENCE { acdSmapRegSetCodePointID Unsigned32, acdSmapRegSetCodePointRegulatorID Unsigned32, acdSmapRegSetCodePointRegulatorEnable TruthValue } acdSmapRegSetCodePointID OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each row. Base on Code Point, 0 to 64 for DSCP or 0 to 7 for PCP or IP precedence." ::= { acdSmapRegSetCodePointEntry 1 } acdSmapRegSetCodePointRegulatorID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The bandwidth regulator that will be used to regulate the traffic flow that has this PCP/IP precendence/DSCP value. Refer to acdRegulatorTable to find the exact identifier (same as acdRegulatorID)." DEFVAL { 0 } ::= { acdSmapRegSetCodePointEntry 2 } acdSmapRegSetCodePointRegulatorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable traffic regulation for this PCP, IP precedence or DSCP value." DEFVAL { false } ::= { acdSmapRegSetCodePointEntry 3 } --------------------------------------------------------------------------- -- The Port CoS to encode DEI enable configuration table --------------------------------------------------------------------------- acdSmapPortCoSEncodeDeiTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdSmapPortCoSEncodeDeiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TBD" ::= { acdSmapConfig 5 } acdSmapPortCoSEncodeDeiEntry OBJECT-TYPE SYNTAX AcdSmapPortCoSEncodeDeiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings for a code point." INDEX { acdSmapPortCoSPortID } ::= { acdSmapPortCoSEncodeDeiTable 1 } AcdSmapPortCoSEncodeDeiEntry ::= SEQUENCE { acdSmapPortCoSPortID Unsigned32, acdSmapPortCoSEncodeDeiEnable INTEGER } acdSmapPortCoSPortID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each row. Based on port number." ::= { acdSmapPortCoSEncodeDeiEntry 1 } acdSmapPortCoSEncodeDeiEnable OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry to enable/disable encode DEI on a port." ::= { acdSmapPortCoSEncodeDeiEntry 2 } --------------------------------------------------------------------------- -- The Port CoS to Pcp mapping configuration table -- This table contains all Code Point for a CoS profile entry. --------------------------------------------------------------------------- acdSmapPortCoSMapTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdSmapPortCoSMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TBD" ::= { acdSmapConfig 6 } acdSmapPortCoSMapEntry OBJECT-TYPE SYNTAX AcdSmapPortCoSMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings for a code point." INDEX { acdSmapPortCoSPortID, acdSmapPortCoSMapID } ::= { acdSmapPortCoSMapTable 1 } AcdSmapPortCoSMapEntry ::= SEQUENCE { acdSmapPortCoSMapID Unsigned32, acdSmapPortCoSMapCosIn Unsigned32, acdSmapPortCoSMapGreenOut Unsigned32, acdSmapPortCoSMapYellowOut Unsigned32 } acdSmapPortCoSMapID OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value based on CoS value." ::= { acdSmapPortCoSMapEntry 1 } acdSmapPortCoSMapCosIn OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The CoS value for this entry." ::= { acdSmapPortCoSMapEntry 2 } acdSmapPortCoSMapGreenOut OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority code Point value that will be used in the outgoing green packets. This value is selected if the result of the bandwidth regulator assigned to this entry is green or if the pre-marking color is green and no bandwidth regulator is assigned to this entry." ::= { acdSmapPortCoSMapEntry 3 } acdSmapPortCoSMapYellowOut OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority code Point value that will be used in the outgoing yellow packets. This value is selected if the result of the bandwidth regulator assigned to this entry is yellow or if the pre-marking color is yellow and no bandwidth regulator is assigned to this entry." ::= { acdSmapPortCoSMapEntry 4 } --------------------------------------------------------------------------- -- ACD-SMAP-MIB Module - Conformance Information --------------------------------------------------------------------------- acdSmapCompliances OBJECT IDENTIFIER ::= { acdSmapConformance 1 } acdSmapGroups OBJECT IDENTIFIER ::= { acdSmapConformance 2 } --------------------------------------------------------------------------- -- Units of conformance --------------------------------------------------------------------------- acdSmapCoSProfGroup OBJECT-GROUP OBJECTS { acdSmapCoSProfRowStatus, acdSmapCoSProfName, acdSmapCoSProfType, acdSmapCoSProfDecodeDropBit, acdSmapCoSProfEncodeDropBit } STATUS current DESCRIPTION "Objects for the CoS profile Group." ::= { acdSmapGroups 1 } acdSmapCoSProfCodePointGroup OBJECT-GROUP OBJECTS { acdSmapCoSProfCodePointPreMarkingColor, acdSmapCoSProfCodePointGreenOut, acdSmapCoSProfCodePointYellowOut } STATUS current DESCRIPTION "Objects for the CoS profile CodePoint Group." ::= { acdSmapGroups 2 } acdSmapRegSetGroup OBJECT-GROUP OBJECTS { acdSmapRegSetRowStatus, acdSmapRegSetName, acdSmapRegSetType } STATUS current DESCRIPTION "Objects for the Regulator Set Group." ::= { acdSmapGroups 3 } acdSmapRegSetCodePointGroup OBJECT-GROUP OBJECTS { acdSmapRegSetCodePointRegulatorID, acdSmapRegSetCodePointRegulatorEnable } STATUS current DESCRIPTION "Objects for the Regulator Set CodePoint Group." ::= { acdSmapGroups 4 } acdSmapPortCoSEncodeDeiGroup OBJECT-GROUP OBJECTS { acdSmapPortCoSEncodeDeiEnable } STATUS current DESCRIPTION "Objects for the Port CoS Map DIE enable Group." ::= { acdSmapGroups 5 } acdSmapPortCoSMapGroup OBJECT-GROUP OBJECTS { acdSmapPortCoSMapCosIn, acdSmapPortCoSMapGreenOut, acdSmapPortCoSMapYellowOut } STATUS current DESCRIPTION "Objects for the CoS profile CodePoint Group." ::= { acdSmapGroups 6 } acdSmapCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the ACD-SMAP-MIB module." MODULE MANDATORY-GROUPS { acdSmapCoSProfGroup, acdSmapCoSProfCodePointGroup, acdSmapRegSetGroup, acdSmapRegSetCodePointGroup, acdSmapPortCoSEncodeDeiGroup, acdSmapPortCoSMapGroup } OBJECT acdSmapCoSProfRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT acdSmapRegSetRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." ::= { acdSmapCompliances 1 } END