--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2016, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


ACD-ERP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Unsigned32
        FROM SNMPv2-SMI
    DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF

    acdMibs
        FROM ACCEDIAN-SMI;

acdErp MODULE-IDENTITY

    LAST-UPDATED "201609230100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             2351 Alfred-Nobel blvd., Suite N-410
             Saint-Laurent, Quebec Canada H4S 2A9
             E-mail: support@accedian.com"
    DESCRIPTION
            "The ERP database for this Accedian Networks device."

    REVISION "201609230100Z"        -- 23 SEP 2016
    DESCRIPTION
            "Remove AcdErpVlanType out of MIB file."

    REVISION "201201110100Z"        -- 11 JAN 2012
    DESCRIPTION
            "Initial version of MIB module ACD-ERP-MIB."

    ::= { acdMibs 15 }

acdErpMIBObjects         OBJECT IDENTIFIER ::= { acdErp 0 }
acdErpConformance        OBJECT IDENTIFIER ::= { acdErp 1 }
                        
acdErpConfig             OBJECT IDENTIFIER ::= { acdErpMIBObjects 1 }
acdErpCounter            OBJECT IDENTIFIER ::= { acdErpMIBObjects 2 }
acdErpStatus             OBJECT IDENTIFIER ::= { acdErpMIBObjects 3 }
acdErpVlanFdb            OBJECT IDENTIFIER ::= { acdErpMIBObjects 4 }
   
---------------------------------------------------------------------------

-- Textual conventions
---------------------------------------------------------------------------

AcdErpPortStateType ::= TEXTUAL-CONVENTION
	STATUS      current
	DESCRIPTION
	"The status of the port's forwarding."
	SYNTAX      INTEGER {
		    forwarding(0),
		    blocked(1)
	}

AcdErpStateType ::= TEXTUAL-CONVENTION
	STATUS      current
	DESCRIPTION
	"The state of the ERP instance."
	SYNTAX      INTEGER {
		    idle(1),
		    prot(2),
		    ms(3),
		    fs(4),
		    pending(5)
	}

AcdErpPortStatusType ::= TEXTUAL-CONVENTION
	STATUS      current
	DESCRIPTION
	"The state of the port's signal."
	SYNTAX      INTEGER {
		    ok(1),
		    sd(2),
		    sf(3)
	}

---------------------------------------------------------------------------
 -- The Erp configuration table
 -- This table contains all Service entry configurations.
---------------------------------------------------------------------------

acdErpConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdErpConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains all instance of ERP of this unit."
    ::= { acdErpConfig 1 }

acdErpConfigEntry OBJECT-TYPE
    SYNTAX      AcdErpConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings for an instance."
    INDEX   { acdErpIndex }
    ::=  { acdErpConfigTable 1 }

AcdErpConfigEntry ::= SEQUENCE {
    acdErpIndex                   Unsigned32,
    acdErpConfigRowStatus         RowStatus,
    acdErpConfigName              DisplayString,    
    acdErpConfigRPLRole           DisplayString,
    acdErpConfigRPLPort		  Unsigned32,
    acdErpConfigHoldOffTimer      Unsigned32,
    acdErpConfigRevertive         TruthValue,
    acdErpConfigGuardTimer        Unsigned32,
    acdErpConfigWTRTimer          Unsigned32,
    acdErpConfigMDLevel           Unsigned32,
    acdErpConfigAPSVid            Unsigned32,
    acdErpConfigVids0to1023       OCTET STRING,
    acdErpConfigVids1024to2047    OCTET STRING,
    acdErpConfigVids2048to3071    OCTET STRING,
    acdErpConfigVids3072to4095    OCTET STRING,
    acdErpConfigLAGPort           DisplayString,
    acdErpConfigMep0Idx           Unsigned32,
    acdErpConfigMep1Idx           Unsigned32
}

acdErpIndex  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each instance."
    ::= { acdErpConfigEntry 1 }

acdErpConfigRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new Service you shall provide a unique name for an empty
        row with the RowStatus set to Create and Go."
    ::= { acdErpConfigEntry 2 }

acdErpConfigName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A unique name used to identify the instance"
    ::= { acdErpConfigEntry 3 }

acdErpConfigRPLRole OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "RPL role (Owner, Neighbor or None)."
    ::= { acdErpConfigEntry 4 }

acdErpConfigRPLPort OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The index of the port used as RPL."
    DEFVAL      { 0 }
    ::= { acdErpConfigEntry 5 }

acdErpConfigHoldOffTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 10000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The hold off timer duration in ms."
    ::= { acdErpConfigEntry 6 }

acdErpConfigRevertive OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This indicates if the ERP is in revertive state."
    DEFVAL      { 1 }
    ::= { acdErpConfigEntry 7 }
    
acdErpConfigGuardTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 2000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The guard timer duration in ms."
    DEFVAL      { 500 }
    ::= { acdErpConfigEntry 8 }

acdErpConfigWTRTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 2000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The WTR timer duration in minutes."
    DEFVAL      { 5 }
    ::= { acdErpConfigEntry 9 }

acdErpConfigMDLevel OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maintenance domain level."
    DEFVAL      { 0 }
    ::= { acdErpConfigEntry 10 }

acdErpConfigAPSVid OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The APS VID."
    ::= { acdErpConfigEntry 11 }

acdErpConfigVids0to1023 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpConfigEntry 12 }

acdErpConfigVids1024to2047 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpConfigEntry 13 }

acdErpConfigVids2048to3071 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpConfigEntry 14 }

acdErpConfigVids3072to4095 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpConfigEntry 15 }


acdErpConfigLAGPort OBJECT-TYPE
    SYNTAX      DisplayString  (SIZE (1..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The LAG port name"
    ::= { acdErpConfigEntry 16 }
   
acdErpConfigMep0Idx OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 1000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The MEP0 port index."
    ::= { acdErpConfigEntry 17 }
   
acdErpConfigMep1Idx OBJECT-TYPE
    SYNTAX      Unsigned32 (0 .. 1000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The MEP1 port index."
    ::= { acdErpConfigEntry 18 }

---------------------------------------------------------------------------
 -- The instance counters table
 -- This table contains all ERP counters.
---------------------------------------------------------------------------

acdErpCounterTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdErpCounterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains all instance of ERP of this unit."
    ::= { acdErpCounter 1 }

acdErpCounterEntry OBJECT-TYPE
    SYNTAX      AcdErpCounterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all counters for an instance."
    INDEX   { acdErpCounterIndex }
    ::=  { acdErpCounterTable 1 }

AcdErpCounterEntry ::= SEQUENCE {
    acdErpCounterIndex            Unsigned32,
    acdErpCounterPort0LocalClear       Unsigned32,
    acdErpCounterPort0LocalFs          Unsigned32,
    acdErpCounterPort0LocalSf          Unsigned32,
    acdErpCounterPort0LocalMs          Unsigned32,
    acdErpCounterPort0RxAps            Unsigned32,
    acdErpCounterPort0RxApsFs          Unsigned32,
    acdErpCounterPort0RxApsSf          Unsigned32,
    acdErpCounterPort0RxApsMs          Unsigned32,
    acdErpCounterPort0RxApsNrRb        Unsigned32,
    acdErpCounterPort0RxApsNr          Unsigned32,
    acdErpCounterPort0TxAps            Unsigned32,
    acdErpCounterPort0TxApsFs          Unsigned32,
    acdErpCounterPort0TxApsSf          Unsigned32,
    acdErpCounterPort0TxApsMs          Unsigned32,
    acdErpCounterPort0TxApsNrRb        Unsigned32,
    acdErpCounterPort0TxApsNr          Unsigned32,
    acdErpCounterPort0DropGuard        Unsigned32,
    acdErpCounterPort0DropUnknown      Unsigned32,
    acdErpCounterPort0DropMismatch     Unsigned32,
    acdErpCounterPort1LocalClear       Unsigned32,
    acdErpCounterPort1LocalFs          Unsigned32,
    acdErpCounterPort1LocalSf          Unsigned32,
    acdErpCounterPort1LocalMs          Unsigned32,
    acdErpCounterPort1RxAps            Unsigned32,
    acdErpCounterPort1RxApsFs          Unsigned32,
    acdErpCounterPort1RxApsSf          Unsigned32,
    acdErpCounterPort1RxApsMs          Unsigned32,
    acdErpCounterPort1RxApsNrRb        Unsigned32,
    acdErpCounterPort1RxApsNr          Unsigned32,
    acdErpCounterPort1TxAps            Unsigned32,
    acdErpCounterPort1TxApsFs          Unsigned32,
    acdErpCounterPort1TxApsSf          Unsigned32,
    acdErpCounterPort1TxApsMs          Unsigned32,
    acdErpCounterPort1TxApsNrRb        Unsigned32,
    acdErpCounterPort1TxApsNr          Unsigned32,
    acdErpCounterPort1DropGuard        Unsigned32,
    acdErpCounterPort1DropUnknown      Unsigned32,
    acdErpCounterPort1DropMismatch     Unsigned32
}

acdErpCounterIndex  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An index that uniquely identifies this instance."
    ::= { acdErpCounterEntry 1 }

acdErpCounterPort0LocalClear  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local clear event processed."
    ::= { acdErpCounterEntry 2 }

acdErpCounterPort0LocalFs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local force switch event processed."
    ::= { acdErpCounterEntry 3 }

acdErpCounterPort0LocalSf  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local signal failed event processed."
    ::= { acdErpCounterEntry 4 }

acdErpCounterPort0LocalMs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local manual switch event processed."
    ::= { acdErpCounterEntry 5 }

acdErpCounterPort0RxAps  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of APS messages received."
    ::= { acdErpCounterEntry 6 }

acdErpCounterPort0RxApsFs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of force switch messages received."
    ::= { acdErpCounterEntry 7 }

acdErpCounterPort0RxApsSf  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of signal failed messages received."
    ::= { acdErpCounterEntry 8 }


acdErpCounterPort0RxApsMs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of manual switch messages received."
    ::= { acdErpCounterEntry 9 }

acdErpCounterPort0RxApsNrRb  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request RPL blocked messages received."
    ::= { acdErpCounterEntry 10 }

acdErpCounterPort0RxApsNr  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request messages received."
    ::= { acdErpCounterEntry 11 }


acdErpCounterPort0TxAps  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of APS messages transmitted."
    ::= { acdErpCounterEntry 12 }

acdErpCounterPort0TxApsFs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of force switch messages transmitted."
    ::= { acdErpCounterEntry 13 }

acdErpCounterPort0TxApsSf  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of signal failed messages transmitted."
    ::= { acdErpCounterEntry 14 }


acdErpCounterPort0TxApsMs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of manual switch messages transmitted."
    ::= { acdErpCounterEntry 15 }

acdErpCounterPort0TxApsNrRb  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request RPL blocked messages transmitted."
    ::= { acdErpCounterEntry 16 }

acdErpCounterPort0TxApsNr  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request messages transmitted."
    ::= { acdErpCounterEntry 17 }

acdErpCounterPort0DropGuard  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages dropped because of the guard timer."
    ::= { acdErpCounterEntry 18 }

acdErpCounterPort0DropUnknown  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages dropped because of unrecognized op codes."
    ::= { acdErpCounterEntry 19 }

acdErpCounterPort0DropMismatch  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages dropped because of erp version mismatch."
    ::= { acdErpCounterEntry 20 }

acdErpCounterPort1LocalClear  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local clear event processed."
    ::= { acdErpCounterEntry 21 }

acdErpCounterPort1LocalFs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local force switch event processed."
    ::= { acdErpCounterEntry 22 }

acdErpCounterPort1LocalSf  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local signal failed event processed."
    ::= { acdErpCounterEntry 23 }

acdErpCounterPort1LocalMs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of local manual switch event processed."
    ::= { acdErpCounterEntry 24 }

acdErpCounterPort1RxAps  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of APS messages received."
    ::= { acdErpCounterEntry 25 }

acdErpCounterPort1RxApsFs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of force switch messages received."
    ::= { acdErpCounterEntry 26 }

acdErpCounterPort1RxApsSf  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of signal failed messages received."
    ::= { acdErpCounterEntry 27 }


acdErpCounterPort1RxApsMs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of manual switch messages received."
    ::= { acdErpCounterEntry 28 }

acdErpCounterPort1RxApsNrRb  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request RPL blocked messages received."
    ::= { acdErpCounterEntry 29 }

acdErpCounterPort1RxApsNr  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request messages received."
    ::= { acdErpCounterEntry 30 }


acdErpCounterPort1TxAps  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of APS messages transmitted."
    ::= { acdErpCounterEntry 31 }

acdErpCounterPort1TxApsFs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of force switch messages transmitted."
    ::= { acdErpCounterEntry 32 }

acdErpCounterPort1TxApsSf  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of signal failed messages transmitted."
    ::= { acdErpCounterEntry 33 }


acdErpCounterPort1TxApsMs  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of manual switch messages transmitted."
    ::= { acdErpCounterEntry 34 }

acdErpCounterPort1TxApsNrRb  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request RPL blocked messages transmitted."
    ::= { acdErpCounterEntry 35 }

acdErpCounterPort1TxApsNr  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of no request messages transmitted."
    ::= { acdErpCounterEntry 36 }

acdErpCounterPort1DropGuard  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages dropped because of the guard timer."
    ::= { acdErpCounterEntry 37 }

acdErpCounterPort1DropUnknown  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages dropped because of unrecognized op codes."
    ::= { acdErpCounterEntry 38 }

acdErpCounterPort1DropMismatch  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages dropped because of erp version mismatch."
    ::= { acdErpCounterEntry 39 }

---------------------------------------------------------------------------
 -- The status table
 -- This table contains all erp entry status.
---------------------------------------------------------------------------
acdErpStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdErpStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains all instance of ERP of this unit."
    ::= { acdErpStatus 1 }

acdErpStatusEntry OBJECT-TYPE
    SYNTAX      AcdErpStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all status for an instance"
    INDEX   { acdErpStatusIdx }
    ::=  { acdErpStatusTable 1 }

AcdErpStatusEntry ::= SEQUENCE {
    acdErpStatusIdx                Unsigned32,
    acdErpStatusName               DisplayString,
    acdErpStatusNodeId             MacAddress,
    acdErpStatusRPLNodeId          MacAddress,
    acdErpStatusState              AcdErpStateType,
    acdErpStatusRequestNodeId      MacAddress,
    acdErpStatusRequest            Unsigned32,
    acdErpPort0Status              AcdErpPortStatusType,
    acdErpPort0State               AcdErpPortStateType,
    acdErpPort1Status              AcdErpPortStatusType,
    acdErpPort1State               AcdErpPortStateType
}

acdErpStatusIdx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique index for each service instance."
    ::= { acdErpStatusEntry 1 }

acdErpStatusName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A unique name used to identify the instance."
    ::= { acdErpStatusEntry 2 }

acdErpStatusNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The instance node ID."
    ::= { acdErpStatusEntry 3 }

acdErpStatusRPLNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The RPL node ID."
    ::= { acdErpStatusEntry 4 }

acdErpStatusState OBJECT-TYPE
    SYNTAX      AcdErpStateType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ERP state."
    ::= { acdErpStatusEntry 5 }

acdErpStatusRequestNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ERP latest top priority request node ID."
    ::= { acdErpStatusEntry 6 }

acdErpStatusRequest OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ERP latest top priority request."
    ::= { acdErpStatusEntry 7 }

acdErpPort0Status OBJECT-TYPE
    SYNTAX      AcdErpPortStatusType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of Port 0."
    ::= { acdErpStatusEntry 8 }

acdErpPort0State OBJECT-TYPE
    SYNTAX      AcdErpPortStateType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state of Port 0."
    ::= { acdErpStatusEntry 9 }

acdErpPort1Status OBJECT-TYPE
    SYNTAX      AcdErpPortStatusType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of Port 1."
    ::= { acdErpStatusEntry 10 }

acdErpPort1State OBJECT-TYPE
    SYNTAX      AcdErpPortStateType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state of Port 1."
    ::= { acdErpStatusEntry 11 }

---------------------------------------------------------------------------
 -- The vlan fdb table
 -- This table contains all vlan fdb entry.
---------------------------------------------------------------------------

acdErpVlanFdbTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdErpVlanFdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains all instance of ERP of this unit."
    ::= { acdErpVlanFdb 1 }

acdErpVlanFdbEntry OBJECT-TYPE
    SYNTAX      AcdErpVlanFdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all vlan fdb info for an instance"
    INDEX   { acdErpVlanFdbIdx }
    ::=  { acdErpVlanFdbTable 1 }

AcdErpVlanFdbEntry ::= SEQUENCE {
    acdErpVlanFdbIdx                     Unsigned32,
    acdErpVlanFdbPort0Vids0to1023        OCTET STRING,
    acdErpVlanFdbPort0Vids1024to2047     OCTET STRING,
    acdErpVlanFdbPort0Vids2048to3071     OCTET STRING,
    acdErpVlanFdbPort0Vids3072to4095     OCTET STRING,
    acdErpVlanFdbPort1Vids0to1023        OCTET STRING,
    acdErpVlanFdbPort1Vids1024to2047     OCTET STRING,
    acdErpVlanFdbPort1Vids2048to3071     OCTET STRING,
    acdErpVlanFdbPort1Vids3072to4095     OCTET STRING,
    acdErpVlanFdbFloodingVids0to1023     OCTET STRING,
    acdErpVlanFdbFloodingVids1024to2047  OCTET STRING,
    acdErpVlanFdbFloodingVids2048to3071  OCTET STRING,
    acdErpVlanFdbFloodingVids3072to4095  OCTET STRING,
    acdErpVlanFdbFlappingVids0to1023     OCTET STRING,
    acdErpVlanFdbFlappingVids1024to2047  OCTET STRING,
    acdErpVlanFdbFlappingVids2048to3071  OCTET STRING,
    acdErpVlanFdbFlappingVids3072to4095  OCTET STRING
}

acdErpVlanFdbIdx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique index for each instance."
    ::= { acdErpVlanFdbEntry 1 }

acdErpVlanFdbPort0Vids0to1023 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 2 }

acdErpVlanFdbPort0Vids1024to2047 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 3 }

acdErpVlanFdbPort0Vids2048to3071 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 4 }

acdErpVlanFdbPort0Vids3072to4095 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 5 }

acdErpVlanFdbPort1Vids0to1023 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 6 }


acdErpVlanFdbPort1Vids1024to2047 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 7 }

acdErpVlanFdbPort1Vids2048to3071 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 8 }

acdErpVlanFdbPort1Vids3072to4095 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 9 }


acdErpVlanFdbFloodingVids0to1023 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 10 }

acdErpVlanFdbFloodingVids1024to2047 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 11 }

acdErpVlanFdbFloodingVids2048to3071 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 12 }

acdErpVlanFdbFloodingVids3072to4095 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 13 }

acdErpVlanFdbFlappingVids0to1023 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 14 }

acdErpVlanFdbFlappingVids1024to2047 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 15 }

acdErpVlanFdbFlappingVids2048to3071 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 16 }

acdErpVlanFdbFlappingVids3072to4095 OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Each octet specifies a set of eight VLANs, the first octet specifying
         VLAN ID 0 through 7, and so on. Within each octet, the most significant
         bit represents the lowest numbered VLAN ID. If that bit has a value of
         '1' then that VLAN is included in the set of VLANs; the VLAN is not 
         included otherwise." 
    ::= { acdErpVlanFdbEntry 17 }

---------------------------------------------------------------------------
 -- ACD-ERP-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdErpCompliances    OBJECT IDENTIFIER ::= { acdErpConformance 1 }
acdErpGroups         OBJECT IDENTIFIER ::= { acdErpConformance 2 }
                    
---------------------------------------------------------------------------
 -- Units of conformance
---------------------------------------------------------------------------

acdErpConfigGroup OBJECT-GROUP
    OBJECTS {
	acdErpConfigRowStatus,
	acdErpConfigName,
	acdErpConfigRPLRole,
	acdErpConfigRPLPort,
	acdErpConfigHoldOffTimer,
	acdErpConfigRevertive,
	acdErpConfigGuardTimer,
	acdErpConfigWTRTimer,
	acdErpConfigMDLevel,
	acdErpConfigAPSVid,
	acdErpConfigVids0to1023,
	acdErpConfigVids1024to2047,
	acdErpConfigVids2048to3071,
	acdErpConfigVids3072to4095,
	acdErpConfigLAGPort,
	acdErpConfigMep0Idx,
	acdErpConfigMep1Idx
    }
    STATUS      current
    DESCRIPTION
       "Objects for the ERP configuration Group."
    ::= { acdErpGroups 1 }

acdErpCounterGroup OBJECT-GROUP
    OBJECTS {    
	acdErpCounterPort0LocalClear,
	acdErpCounterPort0LocalFs,
	acdErpCounterPort0LocalSf,
	acdErpCounterPort0LocalMs,
	acdErpCounterPort0RxAps,
	acdErpCounterPort0RxApsFs,
	acdErpCounterPort0RxApsSf,
	acdErpCounterPort0RxApsMs,
	acdErpCounterPort0RxApsNrRb,
	acdErpCounterPort0RxApsNr,
	acdErpCounterPort0TxAps,
	acdErpCounterPort0TxApsFs,
	acdErpCounterPort0TxApsSf,
	acdErpCounterPort0TxApsMs,
	acdErpCounterPort0TxApsNrRb,
	acdErpCounterPort0TxApsNr,
	acdErpCounterPort0DropGuard,
	acdErpCounterPort0DropUnknown,
	acdErpCounterPort0DropMismatch,
	acdErpCounterPort1LocalClear,
	acdErpCounterPort1LocalFs,
	acdErpCounterPort1LocalSf,
	acdErpCounterPort1LocalMs,
	acdErpCounterPort1RxAps,
	acdErpCounterPort1RxApsFs,
	acdErpCounterPort1RxApsSf,
	acdErpCounterPort1RxApsMs,
	acdErpCounterPort1RxApsNrRb,
	acdErpCounterPort1RxApsNr,
	acdErpCounterPort1TxAps,
	acdErpCounterPort1TxApsFs,
	acdErpCounterPort1TxApsSf,
	acdErpCounterPort1TxApsMs,
	acdErpCounterPort1TxApsNrRb,
	acdErpCounterPort1TxApsNr,
	acdErpCounterPort1DropGuard,
	acdErpCounterPort1DropUnknown,
	acdErpCounterPort1DropMismatch
    }
    STATUS      current
    DESCRIPTION
       "Objects for the ERP Counter Group."
    ::= { acdErpGroups 2 }

acdErpStatusGroup OBJECT-GROUP
    OBJECTS {
	acdErpStatusName,
	acdErpStatusNodeId,
	acdErpStatusRPLNodeId,
	acdErpStatusState,
	acdErpStatusRequestNodeId,
	acdErpStatusRequest,
	acdErpPort0Status,
	acdErpPort0State,
	acdErpPort1Status,
	acdErpPort1State
    }
    STATUS      current
    DESCRIPTION
       "Objects for the ERP Status Group."
    ::= { acdErpGroups 3 }

acdErpVlanFdbGroup OBJECT-GROUP
    OBJECTS {
	acdErpVlanFdbPort0Vids0to1023,
	acdErpVlanFdbPort0Vids1024to2047,
	acdErpVlanFdbPort0Vids2048to3071,
	acdErpVlanFdbPort0Vids3072to4095,
	acdErpVlanFdbPort1Vids0to1023,
	acdErpVlanFdbPort1Vids1024to2047,
	acdErpVlanFdbPort1Vids2048to3071,
	acdErpVlanFdbPort1Vids3072to4095,
	acdErpVlanFdbFloodingVids0to1023,
	acdErpVlanFdbFloodingVids1024to2047,
	acdErpVlanFdbFloodingVids2048to3071,
	acdErpVlanFdbFloodingVids3072to4095,
	acdErpVlanFdbFlappingVids0to1023,
	acdErpVlanFdbFlappingVids1024to2047,
	acdErpVlanFdbFlappingVids2048to3071,
	acdErpVlanFdbFlappingVids3072to4095
    }

    STATUS      current
    DESCRIPTION
       "Objects for the Erp vlan forwarding Group."
    ::= { acdErpGroups 4 }

acdErpCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-ERP-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdErpConfigGroup,
            acdErpCounterGroup,
            acdErpStatusGroup,
            acdErpVlanFdbGroup
         }

    OBJECT  acdErpConfigRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    ::= { acdErpCompliances 1 }

END