C-PRODUCT-MCPU-MIB DEFINITIONS ::= BEGIN IMPORTS mcpu FROM C-PRODUCT-GROUP-MIB cardSlot, vcpSideId FROM C-PRODUCT-BASE-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- MCPU group mcpuVc OBJECT IDENTIFIER ::= { mcpu 1 } mcpuNewVc OBJECT IDENTIFIER ::= { mcpu 2 } shaper OBJECT IDENTIFIER ::= { mcpu 3 } -- Mcpu VC subgroup -- This table is used to access the VC's on the MCPU card For PBS600 -- Release 1.4 & 1.5. -- Mcpu New VC Subgroup is used by PBS330 & PBS600 Rel 2.0 onwards. mcpuNewVcTable OBJECT-TYPE SYNTAX SEQUENCE OF McpuNewVcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The mcpu VC information table." ::= { mcpuNewVc 1 } mcpuNewVcEntry OBJECT-TYPE SYNTAX McpuNewVcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a MCPU VC. The slot number (vcPortSlot) of the MCPU card should be 1. The port number (vcPortPort) should be 1." INDEX { vcpSideId } ::= { mcpuNewVcTable 1 } McpuNewVcEntry ::= SEQUENCE { mcpuNewVcShaper INTEGER, mcpuNewVcIpAddress IpAddress, mcpuNewVcSubnetMask IpAddress } mcpuNewVcShaper OBJECT-TYPE SYNTAX INTEGER { dr-56K (1), dr-112K (2), dr-224K (3), dr-448K (4), dr-673K (5), dr-1344K (6), dr-149M (7), dr-1536M (8), dr-192M (9), dr-238M (10), dr-4M (11), dr-6M (12), dr-8M (13), dr-10M (14), dr-17M (15) } ACCESS read-write STATUS mandatory DESCRIPTION "Data rate supported by the MCPU VC. " ::= { mcpuNewVcEntry 1 } mcpuNewVcIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Management VC IP address." DEFVAL { '00000000'h } ::= { mcpuNewVcEntry 2 } mcpuNewVcSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Management VC IP subnet mask." DEFVAL { '00000000'h } ::= { mcpuNewVcEntry 3 } -- shaper Configuration Group shaperTable OBJECT-TYPE SYNTAX SEQUENCE OF ShaperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The shaper Table contains up to 15 shapers rate. This table uses cardSlot and Shaper number as an index which is uniquely assoicate to entry of each shaper. " ::= { shaper 1 } shaperEntry OBJECT-TYPE SYNTAX ShaperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in the table contains the information of a shaper." INDEX { cardSlot, shaperNumber } ::= { shaperTable 1 } ShaperEntry ::= SEQUENCE { shaperNumber INTEGER, shaperSustainableCellRateInbps INTEGER, shaperSustainableCellRateIncps INTEGER, shaperPeakCellRateInbps INTEGER, shaperPeakCellRateIncps INTEGER, shaperMaximumBurstSizeInBits INTEGER, shaperMaximumBurstSizeInCells INTEGER } shaperNumber OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "Shaper Number of a frame based card" ::= { shaperEntry 1 } shaperSustainableCellRateInbps OBJECT-TYPE SYNTAX INTEGER (16000..17000000) ACCESS read-write STATUS mandatory DESCRIPTION "Sustainable Cell Rate (SCR), in bits per second, is an upper bound on the conforming average rate of an ATM connection over time scales." ::= { shaperEntry 2 } shaperSustainableCellRateIncps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sustainable Cell Rate (SCR), in cells per second, is an upper bound on the conforming average rate of an ATM connection over time scales. The value is calculated based on the input from SCR in bps." ::= { shaperEntry 3 } shaperPeakCellRateInbps OBJECT-TYPE SYNTAX INTEGER (784000..17000000) ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (PCR), in bits per second, is the rate at which ATM source end system can send to a referenced physical service access point that is equal to the inverse of the minimum cell interarrival time. The value of Peak Rate Cell Rate (PCR) cannot be lower than Sustainable Cell Rate (SCR). " ::= { shaperEntry 4 } shaperPeakCellRateIncps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Peak Cell Rate (PCR), in cells per second, is the rate at which ATM source end system can send to a referenced physical service access point that is equal to the inverse of the minimum cell interarrival time. The value of Peak Rate Cell Rate (PCR) is calculated based on the input from PCR in bps. " ::= { shaperEntry 5 } shaperMaximumBurstSizeInBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum Burst Size in bits. This value is read only and is calculated again when MBS (in cells) is changed" ::= { shaperEntry 6 } shaperMaximumBurstSizeInCells OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Burst Size in cells. Minimum value is 1 cell and maximum value is 255 cells. " ::= { shaperEntry 7 } END