-- ================================================================= -- Copyright (C) 2005 by HUAWEI 3COM TECHNOLOGIES. All rights reserved. -- -- Description: Generic Routing Encapsulation configuration MIB -- Reference: INET-ADDRESS-MIB, IPV6-FLOW-LABEL-MIB, IF-MIB -- Version: V1.0 -- History: -- V1.0 created by Sun Ludong -- 2005-06-04 Initial version -- ================================================================= A3COM-HUAWEI-TUNNEL-MIB DEFINITIONS ::= BEGIN IMPORTS h3cCommon FROM A3COM-HUAWEI-OID-MIB MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress FROM SNMPv2-SMI RowStatus, StorageType, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddressType, InetAddress FROM INET-ADDRESS-MIB IPv6FlowLabelOrAny FROM IPV6-FLOW-LABEL-MIB ifIndex, InterfaceIndexOrZero FROM IF-MIB; h3cTunnel MODULE-IDENTITY LAST-UPDATED "200506040000Z" -- June 4, 2005 at 00:00 GMT ORGANIZATION "Huawei 3Com Technologies Co., Ltd. " CONTACT-INFO "Platform Team Huawei 3Com Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip:100085 " DESCRIPTION "This MIB contains objects to Manage configuration and Monitor tunnel. " REVISION "200506040000Z" -- June 4, 2005 at 00:00 GMT DESCRIPTION "The initial revision of this MIB module. " ::= { h3cCommon 53 } H3cTunnelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Tunnel type defination. " SYNTAX INTEGER { other(1), -- none of the following direct(2), -- no intermediate header gre(3), -- GRE encapsulation minimal(4), -- Minimal encapsulation l2tp(5), -- L2TP encapsulation pptp(6), -- PPTP encapsulation l2f(7), -- L2F encapsulation udp(8), -- UDP encapsulation atmp(9), -- ATMP encapsulation msdp(10), -- MSDP encapsulation sixToFour(11), -- 6to4 encapsulation sixOverFour(12), -- 6over4 encapsulation isatap(13), -- ISATAP encapsulation teredo(14), -- Teredo encapsulation tunnelModeReserve(35), -- 15 to 35 are reserved tunnelModeIPv4Gre(36), -- GRE tunnel, IPv4 as transport protocol tunnelModeIPv6Gre(37), -- GRE tunnel, IPv6 as transport protocol tunnelModeIPv4IPv4(38), -- IPv4 over IPv4 tunnel tunnelModeIPv4IPv6Config(39), -- IPv6 over IPv4 manual tunnel tunnelModeIPv4IPv6Auto(40), -- IPv6 over IPv4 auto tunnel tunnelModeIPv4IPv66to4(41), -- IPv6 over IPv4 6to4 tunnel tunnelModeIPv4IPv6Isatap(42), -- IPv6 over IPv4 isatap tunnel tunnelModeIPv6IPv4(43), -- IPv4 over IPv6 tunnelModeIPv6IPv6(44), -- IPv6 over IPv6 tunnel tunnelModeIPv4UdpDVPN(45), -- IPv4 DVPN tunnel£¬UDP method tunnelModeIPv4GreDVPN(46), -- IPv4 DVPN tunnel£¬GRE method tunnelModeIPv6UdpDVPN(47), -- IPv6 DVPN tunnel£¬UDP method tunnelModeIPv6GreDVPN(48), -- IPv6 DVPN tunnel£¬GRE method tunnelModeCrLsp(49), -- IPv4 CRLSP tunnel tunnelModeMax(50) } h3cTunnelMIBObjects OBJECT IDENTIFIER ::= { h3cTunnel 1 } h3cTunnelTables OBJECT IDENTIFIER ::= { h3cTunnelMIBObjects 1 } h3cTunnelIfTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTunnelIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured tunnels. " ::= { h3cTunnelTables 1 } h3cTunnelIfEntry OBJECT-TYPE SYNTAX H3cTunnelIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured tunnel. " INDEX { ifIndex } ::= { h3cTunnelIfTable 1 } H3cTunnelIfEntry ::= SEQUENCE { h3cTunnelIfEncapsMethod H3cTunnelType, h3cTunnelIfHopLimit Integer32, h3cTunnelIfSecurity INTEGER, h3cTunnelIfTOS Integer32, h3cTunnelIfFlowLabel IPv6FlowLabelOrAny, h3cTunnelIfAddressType InetAddressType, h3cTunnelIfLocalInetAddress InetAddress, h3cTunnelIfRemoteInetAddress InetAddress, h3cTunnelIfEncapsLimit Integer32 } h3cTunnelIfEncapsMethod OBJECT-TYPE SYNTAX H3cTunnelType MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation method used by the tunnel. " ::= { h3cTunnelIfEntry 3 } h3cTunnelIfHopLimit OBJECT-TYPE SYNTAX Integer32 (0 | 1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. " ::= { h3cTunnelIfEntry 4 } h3cTunnelIfSecurity OBJECT-TYPE SYNTAX INTEGER { none(1), -- no security ipsec(2), -- IPsec security other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. More specific security-related information may be available in a MIB module for the security protocol in use. " ::= { h3cTunnelIfEntry 5 } h3cTunnelIfTOS OBJECT-TYPE SYNTAX Integer32 (-2..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value of -2 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB module. A value between 0 and 63 inclusive indicates that the bit field is set to the indicated value. " ::= { h3cTunnelIfEntry 6 } h3cTunnelIfFlowLabel OBJECT-TYPE SYNTAX IPv6FlowLabelOrAny MAX-ACCESS read-only STATUS current DESCRIPTION "The method used to set the IPv6 Flow Label value. This object need not be present in rows where h3cTunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB. Any other value indicates that the Flow Label field is set to the indicated value. " ::= { h3cTunnelIfEntry 7 } h3cTunnelIfAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of address in the corresponding h3cTunnelIfLocalInetAddress and h3cTunnelIfRemoteInetAddress objects. " ::= { h3cTunnelIfEntry 8 } h3cTunnelIfLocalInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by h3cTunnelIfAddressType. " ::= { h3cTunnelIfEntry 9 } h3cTunnelIfRemoteInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel), the value is 0.0.0.0 for tunnels over IPv4 or :: for tunnels over IPv6. The type of this object is given by h3cTunnelIfAddressType. " ::= { h3cTunnelIfEntry 10 } h3cTunnelIfEncapsLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size). " REFERENCE "RFC 2473, section 4.1.1 " ::= { h3cTunnelIfEntry 11 } h3cTunnelInetConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTunnelInetConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation. Note that every row in the h3cTunnelIfTable with a fixed destination address should have a corresponding row in the h3cTunnelInetConfigTable, regardless of whether it was created via SNMP. " ::= { h3cTunnelTables 3 } h3cTunnelInetConfigEntry OBJECT-TYPE SYNTAX H3cTunnelInetConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured tunnel. " INDEX { h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot, h3cTunnelInetConfigTunnNum } ::= { h3cTunnelInetConfigTable 1 } H3cTunnelInetConfigEntry ::= SEQUENCE { h3cTunnelInetConfigSlot Integer32, h3cTunnelInetConfigSubSlot Integer32, h3cTunnelInetConfigTunnNum Integer32, h3cTunnelInetConfigIfIndex InterfaceIndexOrZero, h3cTunnelInetConfigStatus RowStatus } h3cTunnelInetConfigSlot OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot number. h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot and h3cTunnelInetConfigTunnNum descirbe a tunnel interface. For Example, interface tunnel 0/0/25 would be configured as: h3cTunnelInetConfigSlot 0 h3cTunnelInetConfigSubSlot 0 h3cTunnelInetConfigTunnNum 25 " ::= { h3cTunnelInetConfigEntry 1 } h3cTunnelInetConfigSubSlot OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub slot number. As described in h3cTunnelInetConfigSlot's description. " ::= { h3cTunnelInetConfigEntry 2 } h3cTunnelInetConfigTunnNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel number. As described in h3cTunnelInetConfigSlot's description. " ::= { h3cTunnelInetConfigEntry 3 } h3cTunnelInetConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If the value of h3cTunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the interface index has not yet been assigned. " ::= { h3cTunnelInetConfigEntry 6 } h3cTunnelInetConfigStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the h3cTunnelIfTable may be modified while this row is active. To create a row in this table, the management station should set h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot, h3cTunnelInetConfigTunnNum, and set h3cTunnelInetConfigStatus to createAndGo. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable and the h3cTunnelIfTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable and in the h3cTunnelIfTable. " ::= { h3cTunnelInetConfigEntry 7 } END