-- ==========================================================================
-- Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Syslog MIB
-- Reference: RFC3164
-- Version: V1.2
-- History:
--   V1.0 Initial version 2005-08-20 by wangrui
--   V1.1 added h3cSyslogLoghostIpaddressPort by jinyi
--   V1.2 2010-06-09 added h3cSyslogLogGlobalLevel by haoyan
--                   added h3cSyslogLoghostTAddress by jinyi
-- ==========================================================================
A3COM-HUAWEI-SYSLOG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    h3cCommon
        FROM A3COM-HUAWEI-OID-MIB
    DisplayString, TruthValue, RowStatus, TAddress, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    Integer32, Counter32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB;

h3cSyslog MODULE-IDENTITY
    LAST-UPDATED "201006091050Z"
    ORGANIZATION
        "Hangzhou H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team Hangzhou H3C Tech. Co., Ltd.
         Hai-Dian District Beijing P.R. China
         http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "All the configuration of the syslog can be managed
        by syslog Mib."
    REVISION "201006091050Z"
    DESCRIPTION
        "The initial revision of this MIB module."
     ::= { h3cCommon 63 }

--
-- Textual conventions
--

MessageLevelType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Specify severity level of message."
    SYNTAX INTEGER
        {
            emergency(1),
            alert(2),
            critical(3),
            error(4),
            warning(5),
            notice(6),
            informational(7),
            debug(8),
            invalid(9)
        }

TimeStampType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Specify operation types on time stamp of message.
        none: no time stamp information in message.
        date: the time stamp type of message is date.
        boot: the time stamp type of message is the time from
            uptime of system.
        dateWithoutYear: the time stamp type of message is date
            without year information."
    SYNTAX INTEGER
        {
            none(1),
            date(2),
            boot(3),
            dateWithoutYear(4)
        }

FacilityType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Specify loghost facility which generates messages."
    SYNTAX INTEGER
        {
            kernel(0),
            userLevel(1),
            mailSystem(2),
            systemDaemons(3),
            securityAuthorization(4),
            internallyMessages(5),
            linePrinter(6),
            networkNews(7),
            uucp(8),
            clockDaemon(9),
            securityAuthorization2(10),
            ftpDaemon(11),
            ntp(12),
            logAudit(13),
            logAlert(14),
            clockDaemon2(15),
            local0(16),
            local1(17),
            local2(18),
            local3(19),
            local4(20),
            local5(21),
            local6(22),
            local7(23)
        }

--
-- Node definitions
--

h3cSyslogObjects OBJECT IDENTIFIER ::= { h3cSyslog 1 }

h3cSyslogObject OBJECT IDENTIFIER ::= { h3cSyslogObjects 1 }

h3cSyslogState OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The state of syslog: true(1):enable.
                              false(2):disable."
    ::= { h3cSyslogObject 1 }

h3cSyslogMaxLoghost OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The object shows the maximum number of rows in
         h3cLoghostTable."
    ::= { h3cSyslogObject 2 }

h3cSyslogMaxChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The object shows the maximum number of channels in
         h3cSyslogChannelTable."
    ::= { h3cSyslogObject 3 }

h3cSyslogMaxLogbufferSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of messages that can be stored
         in logbuffer."
    ::= { h3cSyslogObject 4 }

h3cSyslogMaxTrapbufferSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of messages that can be stored
         in trapbuffer."
    ::= { h3cSyslogObject 5 }

h3cSyslogConsole OBJECT IDENTIFIER ::= { h3cSyslogObjects 2 }

h3cSyslogConsoleChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The channel number of console."
    DEFVAL { 0 }
    ::= { h3cSyslogConsole 1 }

h3cSyslogMonitor OBJECT IDENTIFIER ::= { h3cSyslogObjects 3 }

h3cSyslogMonitorChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The channel number of monitor."
    DEFVAL { 1 }
    ::= { h3cSyslogMonitor 1 }

h3cSyslogSnmp OBJECT IDENTIFIER ::= { h3cSyslogObjects 4 }

h3cSyslogSnmpChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The channel number of snmp."
    DEFVAL { 5 }
    ::= { h3cSyslogSnmp 1 }

h3cSyslogLogbuffer OBJECT IDENTIFIER ::= { h3cSyslogObjects 5 }

h3cSyslogLogbufferChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The channel number of logbuffer."
    DEFVAL { 4 }
    ::= { h3cSyslogLogbuffer 1 }

h3cSyslogLogbufferSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The capacity of logbuffer which can be customized by users.
         The valid range is from 0 to h3cSyslogMaxLogbufferSize."
    DEFVAL { 512 }
    ::= { h3cSyslogLogbuffer 2 }

h3cSyslogLogbufferTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogLogbufferEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of logbuffer."
    ::= { h3cSyslogLogbuffer 3 }

h3cSyslogLogbufferEntry OBJECT-TYPE
    SYNTAX H3cSyslogLogbufferEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The logbuffer entry of syslog."
    INDEX { h3cLogbufferIndex }
    ::= { h3cSyslogLogbufferTable 1 }

H3cSyslogLogbufferEntry ::=
    SEQUENCE {
        h3cLogbufferIndex                    Integer32,
        h3cLogbufferCurrentMessages          Unsigned32,
        h3cLogbufferOverwrittenMessages      Counter32,
        h3cLogbufferDroppedMessages          Counter32
        }

h3cLogbufferIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of this table."
    ::= { h3cSyslogLogbufferEntry 1 }

h3cLogbufferCurrentMessages OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of log messages stored in logbuffer."
    ::= { h3cSyslogLogbufferEntry 2 }

h3cLogbufferOverwrittenMessages OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of log messages overwritten in logbuffer."
    ::= { h3cSyslogLogbufferEntry 3 }

h3cLogbufferDroppedMessages OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of log messages dropped in logbuffer."
    ::= { h3cSyslogLogbufferEntry 4 }

h3cSyslogTrapbuffer OBJECT IDENTIFIER ::= { h3cSyslogObjects 6 }

h3cSyslogTrapbufferChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The channel number of trapbuffer."
    DEFVAL { 3 }
    ::= { h3cSyslogTrapbuffer 1 }

h3cSyslogTrapbufferSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The capacity of the trapbuffer which can be customized by users.
         The valid range is from 0 to h3cSyslogMaxTrapbufferSize."
    DEFVAL { 256 }
    ::= { h3cSyslogTrapbuffer 2 }

h3cSyslogTrapbufferTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogTrapbufferEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of trapbuffer."
    ::= { h3cSyslogTrapbuffer 3 }

h3cSyslogTrapbufferEntry OBJECT-TYPE
    SYNTAX H3cSyslogTrapbufferEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The trapbuffer entry of syslog."
    INDEX { h3cTrapbufferIndex }
    ::= { h3cSyslogTrapbufferTable 1 }

H3cSyslogTrapbufferEntry ::=
    SEQUENCE {
        h3cTrapbufferIndex                      Integer32,
        h3cTrapbufferCurrentMessages            Unsigned32,
        h3cTrapbufferOverwrittenMessages        Counter32,
        h3cTrapbufferDroppedMessages            Counter32
        }

h3cTrapbufferIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of this table."
    ::= { h3cSyslogTrapbufferEntry 1 }

h3cTrapbufferCurrentMessages OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of trap messages stored in trapbuffer."
    ::= { h3cSyslogTrapbufferEntry 2 }

h3cTrapbufferOverwrittenMessages OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of trap messages overwritten in trapbuffer."
    ::= { h3cSyslogTrapbufferEntry 3 }

h3cTrapbufferDroppedMessages OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of trap messages dropped in trapbuffer."
    ::= { h3cSyslogTrapbufferEntry 4 }

h3cSyslogLoghost OBJECT IDENTIFIER ::= { h3cSyslogObjects 7 }

h3cSyslogLoghostSourceInterface OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The source interface which sends message to loghost.
         All loghosts use the same source interface."
    ::= { h3cSyslogLoghost 1 }

h3cSyslogLoghostTimestampType OBJECT-TYPE
    SYNTAX TimeStampType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Time stamp type of message sent to loghost."
    DEFVAL { date }
    ::= { h3cSyslogLoghost 2 }

h3cSyslogLoghostTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogLoghostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of loghost."
    ::= { h3cSyslogLoghost 3 }

h3cSyslogLoghostEntry OBJECT-TYPE
    SYNTAX H3cSyslogLoghostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The loghost entry of syslog."
    INDEX { h3cSyslogLoghostIndex }
    ::= { h3cSyslogLoghostTable 1 }

H3cSyslogLoghostEntry ::=
    SEQUENCE {
        h3cSyslogLoghostIndex                   Integer32,
        h3cSyslogLoghostChannel                 Integer32,
        h3cSyslogLoghostIpaddressType           InetAddressType,
        h3cSyslogLoghostIpaddress               InetAddress,
        h3cSyslogLoghostFacility                FacilityType,
        h3cSyslogLoghostLanguage                INTEGER,
        h3cSyslogLoghostOperateRowStatus        RowStatus,
        h3cSyslogLoghostIpaddressPort           Integer32,
        h3cSyslogLoghostTAddress                TAddress
    }

h3cSyslogLoghostIndex OBJECT-TYPE
    SYNTAX Integer32(1..64)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of this table."
    ::= { h3cSyslogLoghostEntry 1 }

h3cSyslogLoghostChannel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The channel number of loghost."
    DEFVAL { 2 }
    ::= { h3cSyslogLoghostEntry 2 }

h3cSyslogLoghostIpaddressType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The ip address type of loghost."
    DEFVAL { ipv4 }
    ::= { h3cSyslogLoghostEntry 3 }

h3cSyslogLoghostIpaddress OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The ip address of loghost."
    ::= { h3cSyslogLoghostEntry 4 }

h3cSyslogLoghostFacility OBJECT-TYPE
    SYNTAX FacilityType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The operations staff can selectively filter the messages
         with priority which consists of facility that generates
         the message and severity of the message.
         "
    DEFVAL { local7 }
    ::= { h3cSyslogLoghostEntry 5 }

h3cSyslogLoghostLanguage OBJECT-TYPE
    SYNTAX INTEGER {
        chinese(1),
        english(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The language of the message sent to the loghost."
    DEFVAL { english }
    ::= { h3cSyslogLoghostEntry 6 }

h3cSyslogLoghostOperateRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this table entry."
    ::= { h3cSyslogLoghostEntry 7 }

h3cSyslogLoghostIpaddressPort OBJECT-TYPE
    SYNTAX Integer32(1..65535)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The loghost server port."
    DEFVAL { 514 }
    ::= { h3cSyslogLoghostEntry 8 }

h3cSyslogLoghostTAddress OBJECT-TYPE
    SYNTAX TAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The loghost server transport address."
    ::= { h3cSyslogLoghostEntry 9 }

h3cSyslogChannel OBJECT IDENTIFIER ::= { h3cSyslogObjects 8 }

h3cSyslogChannelTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogChannelEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of syslog channel."
    ::= { h3cSyslogChannel 1 }

h3cSyslogChannelEntry OBJECT-TYPE
    SYNTAX H3cSyslogChannelEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The channel entry of syslog."
    INDEX { h3cSyslogChannelIndex }
    ::= { h3cSyslogChannelTable 1 }

H3cSyslogChannelEntry ::=
    SEQUENCE {
        h3cSyslogChannelIndex       Integer32,
        h3cSyslogChannelName        DisplayString
        }

h3cSyslogChannelIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of this table."
    ::= { h3cSyslogChannelEntry 1 }

h3cSyslogChannelName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (1..30))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The name of channel.
         The channel name must be different from each other."
    ::= { h3cSyslogChannelEntry 2 }

h3cSyslogModule OBJECT IDENTIFIER ::= { h3cSyslogObjects 9 }

h3cSyslogModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of syslog module."
    ::= { h3cSyslogModule 1 }

h3cSyslogModuleEntry OBJECT-TYPE
    SYNTAX H3cSyslogModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The module entry of syslog."
    INDEX { h3cSyslogModuleIndex }
    ::= { h3cSyslogModuleTable 1 }

H3cSyslogModuleEntry ::=
    SEQUENCE {
        h3cSyslogModuleIndex        Integer32,
        h3cSyslogModuleName         DisplayString
        }

h3cSyslogModuleIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of this table."
    ::= { h3cSyslogModuleEntry 1 }

h3cSyslogModuleName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (1..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The name of module."
    ::= { h3cSyslogModuleEntry 2 }

h3cSyslogLog OBJECT IDENTIFIER ::= { h3cSyslogObjects 10 }

h3cSyslogLogTimestampType OBJECT-TYPE
    SYNTAX TimeStampType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Time stamp type of log message."
    DEFVAL { date }
    ::= { h3cSyslogLog 1 }

h3cSyslogLogTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogLogEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of syslog module."
    ::= { h3cSyslogLog 2 }

h3cSyslogLogEntry OBJECT-TYPE
    SYNTAX H3cSyslogLogEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The log entry of syslog."
    INDEX { h3cSyslogChannelIndex,
            h3cSyslogModuleIndex
          }
    ::= { h3cSyslogLogTable 1 }

H3cSyslogLogEntry ::=
    SEQUENCE {
        h3cSyslogLogState           TruthValue,
        h3cSyslogLogLevel           MessageLevelType,
        h3cSyslogLogRowStatus       RowStatus
        }

h3cSyslogLogState OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The switch state of log."
    ::= { h3cSyslogLogEntry 1 }

h3cSyslogLogLevel OBJECT-TYPE
    SYNTAX MessageLevelType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The level of log message."
    ::= { h3cSyslogLogEntry 2 }

h3cSyslogLogRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this table entry."
    ::= { h3cSyslogLogEntry 3 }

h3cSyslogLogGlobalLevel OBJECT-TYPE
    SYNTAX MessageLevelType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The global level of log message."
    ::= { h3cSyslogLog 3 }

h3cSyslogTrap OBJECT IDENTIFIER ::= { h3cSyslogObjects 11 }

h3cSyslogTrapTimestampType OBJECT-TYPE
    SYNTAX TimeStampType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Time stamp type of trap message."
    DEFVAL { date }
    ::= { h3cSyslogTrap 1 }

h3cSyslogTrapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogTrapEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of syslog module."
    ::= { h3cSyslogTrap 2 }

h3cSyslogTrapEntry OBJECT-TYPE
    SYNTAX H3cSyslogTrapEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The trap entry of syslog."
    INDEX { h3cSyslogChannelIndex,
            h3cSyslogModuleIndex
          }
    ::= { h3cSyslogTrapTable 1 }

H3cSyslogTrapEntry ::=
    SEQUENCE {
        h3cSyslogTrapState              TruthValue,
        h3cSyslogTrapLevel              MessageLevelType,
        h3cSyslogTrapRowStatus          RowStatus
        }

h3cSyslogTrapState OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The switch state of trap."
    ::= { h3cSyslogTrapEntry 1 }

h3cSyslogTrapLevel OBJECT-TYPE
    SYNTAX MessageLevelType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The level of trap message."
    ::= { h3cSyslogTrapEntry 2 }

h3cSyslogTrapRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this table entry."
    ::= { h3cSyslogTrapEntry 3 }

h3cSyslogDebug OBJECT IDENTIFIER ::= { h3cSyslogObjects 12 }

h3cSyslogDebugTimestampType OBJECT-TYPE
    SYNTAX TimeStampType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Time stamp type of debug message."
    DEFVAL { boot }
    ::= { h3cSyslogDebug 1 }

h3cSyslogDebugTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cSyslogDebugEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of syslog module."
    ::= { h3cSyslogDebug 2 }

h3cSyslogDebugEntry OBJECT-TYPE
    SYNTAX H3cSyslogDebugEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The debug entry of syslog."
    INDEX { h3cSyslogChannelIndex,
            h3cSyslogModuleIndex
          }
    ::= { h3cSyslogDebugTable 1 }

H3cSyslogDebugEntry ::=
    SEQUENCE {
        h3cSyslogDebugState             TruthValue,
        h3cSyslogDebugLevel             MessageLevelType,
        h3cSyslogDebugRowStatus         RowStatus
        }

h3cSyslogDebugState OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The switch state of debug."
    ::= { h3cSyslogDebugEntry 1 }

h3cSyslogDebugLevel OBJECT-TYPE
    SYNTAX MessageLevelType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The level of debug message."
    ::= { h3cSyslogDebugEntry 2 }

h3cSyslogDebugRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this table entry."
    ::= { h3cSyslogDebugEntry 3 }

END