--============================================================================== -- Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: PPP Over Sonet MIB -- Reference: -- Version: V1.4 -- History: -- V1.0 2004-10-28 created by fuzhenyu -- V1.1 2004-12-13 add notifications(9-13) under h3cPosMIBNotifications by fuzhenyu. -- V1.2 2005-04-12 add h3cPosFlagJ0Type, h3cPosFlagJ1Type in h3cPosParamTable by zhaotingqi. -- V1.3 2007-07-19 add h3cPosNormalAlarm in h3cPosMIBNotifications by chenfangchun -- V1.4 2010-05-19 modified by Tong Wei for TCA (Threshold Crossing Alarms) -- add h3cPosB1TCAThreshold, h3cPosB2TCAThreshold, h3cPosB3TCAThreshold, -- h3cPosB1TCAEnable, h3cPosB2TCAEnable and h3cPosB3TCAEnable -- in h3cPosParamTable -- add h3cPosB1TCAlarm, h3cPosB2TCAlarm and h3cPosB3TCAlarm -- in h3cPosMIBNotifications --============================================================================== A3COM-HUAWEI-PPP-OVER-SONET-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex, ifDescr FROM RFC1213-MIB Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC h3cCommon FROM A3COM-HUAWEI-OID-MIB; h3cPos MODULE-IDENTITY LAST-UPDATED "201005191700Z" -- May 19, 2010 GMT ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions. " REVISION "201005191700Z" -- May 19, 2010 at 17:00 GMT DESCRIPTION "Update the version of this MIB module" REVISION "200707191700Z" -- Jul 19, 2007 at 17:00 GMT DESCRIPTION "The initial version of this MIB module" ::= { h3cCommon 19 } h3cPosMIBObjects OBJECT IDENTIFIER ::= { h3cPos 1 } h3cPosParamTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cPosParamTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pos parameter table." ::= { h3cPosMIBObjects 1 } h3cPosParamTableEntry OBJECT-TYPE SYNTAX H3cPosParamTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { h3cPosParamTable 1 } H3cPosParamTableEntry ::= SEQUENCE { h3cPosCRC INTEGER, h3cPosMTU INTEGER, h3cPosScramble TruthValue, h3cPosClockSource INTEGER, h3cPosSdhFlagJ0 DisplayString, h3cPosSdhFlagJ1 DisplayString, h3cPosSonetFlagJ0 INTEGER, h3cPosSonetFlagJ1 DisplayString, h3cPosFlagC2 INTEGER, h3cPosFrameType INTEGER, h3cPosBindVlanId INTEGER, h3cPosEncapsulation INTEGER, h3cPoskeepaliveTimeout INTEGER, h3cPosBERthresholdSF INTEGER, h3cPosBERthresholdSD INTEGER, h3cPosB1Error Counter64, h3cPosB2Error Counter64, h3cPosB3Error Counter64, h3cPosM1Error Counter64, h3cPosG1Error Counter64, h3cPosFlagJ0Type INTEGER, h3cPosFlagJ1Type INTEGER, h3cPosB1TCAThreshold INTEGER, h3cPosB2TCAThreshold INTEGER, h3cPosB3TCAThreshold INTEGER, h3cPosB1TCAEnable INTEGER, h3cPosB2TCAEnable INTEGER, h3cPosB3TCAEnable INTEGER } h3cPosCRC OBJECT-TYPE SYNTAX INTEGER{crc32(1),crc16(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The length of CRC" DEFVAL { crc32 } ::={ h3cPosParamTableEntry 1 } h3cPosMTU OBJECT-TYPE SYNTAX INTEGER(64..9192) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Transfer Unit (MTU) of POS interface" ::={ h3cPosParamTableEntry 2 } h3cPosScramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not" DEFVAL { true } ::={ h3cPosParamTableEntry 3 } h3cPosClockSource OBJECT-TYPE SYNTAX INTEGER{system(1),line(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote" DEFVAL { line } ::={ h3cPosParamTableEntry 4 } h3cPosSdhFlagJ0 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The section trace byte. This node is used when the frame type is sdh." ::={ h3cPosParamTableEntry 5 } h3cPosSdhFlagJ1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path trace byte. This node is used when the frame type is sdh." ::={ h3cPosParamTableEntry 6 } h3cPosSonetFlagJ0 OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The section trace byte. This node is used when the frame type is sonet." ::={ h3cPosParamTableEntry 7 } h3cPosSonetFlagJ1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..62)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path trace byte. This node is used when the frame type is sonet." ::={ h3cPosParamTableEntry 8 } h3cPosFlagC2 OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter for the channel signal value of C2 byte" DEFVAL { 22 } ::={ h3cPosParamTableEntry 9 } h3cPosFrameType OBJECT-TYPE SYNTAX INTEGER{sdh(1),sonet(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network)." DEFVAL { sdh } ::={ h3cPosParamTableEntry 10 } h3cPosBindVlanId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos." ::={ h3cPosParamTableEntry 11 } h3cPosEncapsulation OBJECT-TYPE SYNTAX INTEGER{ppp(1),hdlc(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The type of encapsulation " DEFVAL { ppp } ::={ h3cPosParamTableEntry 12 } h3cPoskeepaliveTimeout OBJECT-TYPE SYNTAX INTEGER(0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "The keeplive of hdlc. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link." ::={ h3cPosParamTableEntry 13 } h3cPosBERthresholdSF OBJECT-TYPE SYNTAX INTEGER(3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold." DEFVAL { 3 } ::={ h3cPosParamTableEntry 14 } h3cPosBERthresholdSD OBJECT-TYPE SYNTAX INTEGER(3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold." DEFVAL { 6 } ::={ h3cPosParamTableEntry 15 } h3cPosB1Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for SBIPE(Section Bit Interleave Parity Error)" ::={ h3cPosParamTableEntry 16 } h3cPosB2Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for LBIPE(Line Bit Interleave Parity Error)" ::={ h3cPosParamTableEntry 17 } h3cPosB3Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for PBIPE(Path Bit Interleave Parity Error)" ::={ h3cPosParamTableEntry 18 } h3cPosM1Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "How many times does LREI(Line Remote Error Indication) occur" ::={ h3cPosParamTableEntry 19 } h3cPosG1Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "How many times does PREI(Path Remote Error Indication) occur" ::={ h3cPosParamTableEntry 20 } h3cPosFlagJ0Type OBJECT-TYPE SYNTAX INTEGER{sdh(1),sonet(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type." DEFVAL { sdh } ::={ h3cPosParamTableEntry 21 } h3cPosFlagJ1Type OBJECT-TYPE SYNTAX INTEGER{sdh(1),sonet(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type." DEFVAL { sdh } ::={ h3cPosParamTableEntry 22 } h3cPosB1TCAThreshold OBJECT-TYPE SYNTAX INTEGER (3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for B1 TCA." DEFVAL { 6 } ::={ h3cPosParamTableEntry 23 } h3cPosB2TCAThreshold OBJECT-TYPE SYNTAX INTEGER (3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for B2 TCA." DEFVAL { 6 } ::={ h3cPosParamTableEntry 24 } h3cPosB3TCAThreshold OBJECT-TYPE SYNTAX INTEGER (3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for B3 TCA." DEFVAL { 6 } ::={ h3cPosParamTableEntry 25 } h3cPosB1TCAEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable traps of B1 TCA." DEFVAL { enable } ::={ h3cPosParamTableEntry 26 } h3cPosB2TCAEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable traps of B2 TCA." DEFVAL { enable } ::={ h3cPosParamTableEntry 27 } h3cPosB3TCAEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable traps of B3 TCA." DEFVAL { enable } ::={ h3cPosParamTableEntry 28 } h3cPosMIBNotificationsPrefix OBJECT IDENTIFIER ::= { h3cPos 2 } h3cPosMIBNotifications OBJECT IDENTIFIER ::= { h3cPosMIBNotificationsPrefix 0 } h3cPosLOSAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates loss of signal" ::={ h3cPosMIBNotifications 1 } h3cPosLOFAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates loss of frame" ::={ h3cPosMIBNotifications 2 } h3cPosOOFAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates out of frame" ::={ h3cPosMIBNotifications 3 } h3cPosLAISAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when LAIS(Line Alarm Indication Signal) arrives" ::={ h3cPosMIBNotifications 4 } h3cPosLRDIAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when LRDI(Line Remote Defect Indication) arrives" ::={ h3cPosMIBNotifications 5 } h3cPosPRDIAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when PRDI(Path Remote Defect Indication) arrives" ::={ h3cPosMIBNotifications 6 } h3cPosPAISAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when PAIS(Path Alarm Indication Signal) arrives" ::={ h3cPosMIBNotifications 7 } h3cPosLOPAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates loss of pointer" ::={ h3cPosMIBNotifications 8 } h3cPosSTIMAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates inconsistency between sent and received J0 bytes." ::={ h3cPosMIBNotifications 9 } h3cPosPTIMAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates inconsistency between sent and received J1 bytes." ::={ h3cPosMIBNotifications 10 } h3cPosPSLMAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates a mismatched C2 byte." ::={ h3cPosMIBNotifications 11 } h3cPosLSDAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates that the B2 bit-error rate exceeds SD threshold." ::={ h3cPosMIBNotifications 12 } h3cPosLSFAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates that the B2 bit-error rate exceeds SF threshold." ::={ h3cPosMIBNotifications 13 } h3cPosNormalAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates that the Pos interface state returns normal." ::={ h3cPosMIBNotifications 14 } h3cPosB1TCAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "Threshold crossing alarms for B1." ::={ h3cPosMIBNotifications 15 } h3cPosB2TCAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "Threshold crossing alarms for B2." ::={ h3cPosMIBNotifications 16 } h3cPosB3TCAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "Threshold crossing alarms for B3." ::={ h3cPosMIBNotifications 17 } END