-- ================================================================== -- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Lan Switch Interface Management MIB -- Reference: -- Version: V3.3 -- History: -- V1.0 (1) Created by Zhangshilin, 2001.06.29 -- (2) Revised by Qizhenglin, 2002.01.08 -- V1.1 2004/7/20 Add PortList and VlanIndex define -- V1.2 2004/8/05 Add hwifEthernetIsolate and hwIsolateGroupMax -- by Chenshixing -- V1.3 2004/9/08 add fabric value to hwifVLANType object and -- change the DESCRIPTION by chenshixing -- 2004/9/08 1.change the DESCRIPTION and the range of -- SYNTAX INTEGER from (5..100) to (1..100) -- in hwifMcastControl object by wangyingxia -- 2.add the hwifPpsMcastControl object -- by wangyingxia -- 3.change the status in hwLswVlanMngObject -- to current by gaolong -- V1.4 2004-10-12 updated by gaolong -- Import TEXTUAL-CONVENTION, OBJECT-IDENTITY, Unsigned32. -- Relocate hwLswL2InfMib MODULE-IDENTITY clause. -- Change SYNTAX clause type of VlanIndex from INTEGER to Unsigned32. -- Change MAX-ACCESS clause vlaue of hwifClearStat and hwifEthernetTest -- from write-only to read-write. -- Change value of hwifAggregateModel, hwdot1qVlanType, hwVlanInterfaceFrameType -- and hwifEthernetMdi from underscores to hyphens. -- Change value of hwifMacAddrLearnMode, beginning with lowercase. -- V1.5 2004-11-15 -- Add the object hwdot1qVlanBcastSuppressionPPS by lihaijun -- Adjust the format of the description of hwdot1qVlanBroadcastSuppression -- V1.6 2004-12-2 -- Add the object hwGlobalBroadcastMaxPps by zhanggang -- Add the object hwGlobalBroadcastMaxRatio by zhanggang -- Add hwifVlanVPNStatus and hwBpduTunnelStatus by caiqiang -- Add hwVlanInterfaceIpMethod by wangchao -- V1.7 2005-01-22 -- Remove the content of hwLswVlan from this mib to A3COM-HUAWEI-LswVLAN-MIB -- Remove SnmpAdminString -- V1.8 2005-2-2 -- Add the object hwifPpsBcastDisValControl by zhangjianwei -- V1.9 2005-03-08 -- Add hwifUniSuppressionStep, hwifPpsUniSuppressionMax, hwifMulSuppressionStep, -- hwifPpsMulSuppressionMax, hwifUniSuppression, hwifPpsUniSuppression, -- hwifMulSuppression, hwifPpsMulSuppression by wanghaisheng -- V2.0 2005-06-14 -- Add the object hwifComboActivePort by majun and adjust format -- V2.1 2005-06-30 -- Add the object hwifVlanVPNUplinkStatus, hwifVlanVPNTPID, -- hwVlanVPNTPIDMode and hwVlanVPNTPID by hejunwei -- Add hwifUnknownPacketDropMul, hwifUnknownPacketDropUni by wangyupeng -- Add hwifBMbpsMulSuppressionMax, hwifBMbpsMulSuppression, -- hwifBKbpsMulSuppressionMax, hwifBKbpsMulSuppressionStep -- and hwifBKbpsMulSuppression by lichunyan -- Update decription of MIB objects by gaolong -- V2.2 2005-09-05 -- Add the object hwifIsolateGroupID, hwifisUplinkPort, -- hwPortIsolateGroupTable, hwPortIsolateGroupEntry, -- hwPortIsolateGroupIndex, hwPortIsolateUplinkIfIndex, -- hwPortIsolateGroupRowStatus by huzinan -- V2.3 2005-10-13 -- Add the object hwPortIsolateGroupDescription by hejunwei -- V2.4 2005-11-15 -- Add the value 24000M to hwifEthernetSpeed by wanglirong -- V2.5 2006-01-16 -- Add hwMaxMacLearnRange by zhangyinfei -- Change the DESCRIPTION and the range of hwMaxMacLearn by zhangyinfei -- V2.6 2006-01-03 -- Remove the value range from the definition of hwifXXBasePortIndex -- by wangzhaoyan -- V2.7 2006-02-11 -- Modify description of hwifXXBasePortIndex and hwifXXDevPortIndex -- Modify description of hwifHybridTaggedVlanListLow, hwifHybridTaggedVlanListHigh, -- hwifHybridUnTaggedVlanListLow and hwifHybridUnTaggedVlanListHigh -- Modify some wrong format of the description -- V2.8 2006-03-14 -- Add hwifEthernetAutoSpeedMask, hwifEthernetAutoSpeed in -- hwethernetTable and SpeedModeFlag definition by Jin Yongfeng. -- V2.9 2006-04-24 -- Remove value range of hwifEthernetMTU by Chenxi. -- V3.0 2006-04-30 -- Add hwifBMbpsUniSuppressionMax, hwifBMbpsUniSuppression, -- hwifBKbpsUniSuppressionMax, hwifBKbpsUniSuppressionStep -- and hwifBKbpsUniSuppression by lichunyan. -- V3.1 2006-09-27 -- hwifComboActivePort is obsoleted in hwifXXTable. -- hwifComboPortTable is added for combo interface. -- hwifComboActivePort is replaced with hwifComboPortCurActive. -- V3.2 2009-04-11 -- Add hwifOutPayloadOctets, hwifInPayloadOctets, hwifInErrorPktsRate, -- hwifInPkts, hwifInNormalPkts, hwifOutPkts by lisong. -- V3.3 2011-11-08 -- Add the value s40000M and s100000M to SpeedModeFlag and -- hwifEthernetSpeed by xiedong. -- ================================================================== -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== A3COM-HUAWEI-LswINF-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus, DisplayString, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, TimeTicks, OBJECT-IDENTITY, Unsigned32 FROM SNMPv2-SMI ifEntry, ifIndex FROM RFC1213-MIB lswCommon FROM A3COM-HUAWEI-OID-MIB; hwLswL2InfMib MODULE-IDENTITY LAST-UPDATED "200106290000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "" REVISION "200106290000Z" DESCRIPTION "" ::= { lswCommon 5 } -- ============================================================= -- Textual Conventions -- ============================================================= PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING VlanIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB." SYNTAX Unsigned32 (0..4294967295) InterfaceIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." SYNTAX Integer32 DropDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Representing the direction of dropping packets, if applicable." SYNTAX INTEGER { disable (1), enableInbound (2), enableOutbound (3), enableBoth (4) } SpeedModeFlag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of Negotiable Speed mode." SYNTAX BITS { s10M(0), -- 10M speed s100M(1), -- 100M speed s1000M(2), -- 1000M speed s10000M(3), -- 10000M speed s24000M(4), -- 24000M speed s40000M(5), -- 40000M speed s100000M(6) -- 100000M speed } -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== hwLswExtInterface OBJECT IDENTIFIER ::= { lswCommon 1 } hwifXXTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfXXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended Huawei private interface information table." ::= { hwLswExtInterface 1 } hwifXXEntry OBJECT-TYPE SYNTAX HwIfXXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of extended Huawei private interface information table." AUGMENTS { ifEntry } ::= { hwifXXTable 1} HwIfXXEntry ::= SEQUENCE { hwifUnBoundPort TruthValue , hwifISPhyPort TruthValue , hwifAggregatePort TruthValue , hwifMirrorPort TruthValue , hwifVLANType INTEGER , hwifMcastControl INTEGER , hwifFlowControl TruthValue , hwifSrcMacControl TruthValue , hwifClearStat INTEGER, hwifXXBasePortIndex INTEGER, hwifXXDevPortIndex INTEGER, hwifPpsMcastControl Integer32, hwifPpsBcastDisValControl INTEGER, hwifUniSuppressionStep Integer32, hwifPpsUniSuppressionMax Integer32, hwifMulSuppressionStep Integer32, hwifPpsMulSuppressionMax Integer32, hwifUniSuppression Integer32, hwifPpsUniSuppression Integer32, hwifMulSuppression Integer32, hwifPpsMulSuppression Integer32, hwifComboActivePort INTEGER, hwifBMbpsMulSuppressionMax Integer32, hwifBMbpsMulSuppression Integer32, hwifBKbpsMulSuppressionMax Integer32, hwifBKbpsMulSuppressionStep Integer32, hwifBKbpsMulSuppression Integer32, hwifUnknownPacketDropMul DropDirection, hwifUnknownPacketDropUni DropDirection, hwifBMbpsUniSuppressionMax Integer32, hwifBMbpsUniSuppression Integer32, hwifBKbpsUniSuppressionMax Integer32, hwifBKbpsUniSuppressionStep Integer32, hwifBKbpsUniSuppression Integer32, hwifOutPayloadOctets Counter64, hwifInPayloadOctets Counter64, hwifInErrorPktsRate Integer32, hwifInPkts Counter64, hwifInNormalPkts Counter64, hwifOutPkts Counter64 } hwifUnBoundPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)" ::= { hwifXXEntry 1 } hwifISPhyPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether it is a physical interface." ::= { hwifXXEntry 2 } hwifAggregatePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)" ::= { hwifXXEntry 3 } hwifMirrorPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether it is a mirror port." ::= { hwifXXEntry 4 } hwifVLANType OBJECT-TYPE SYNTAX INTEGER { vLANTrunk (1), access (2), hybrid (3), fabric (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port." ::= { hwifXXEntry 5 } hwifMcastControl OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast storm suppression with the step length of 1, ranging from 1 to 100 percent. In some products the step is 5, ranging from 5 to 100." ::= { hwifXXEntry 6 } hwifFlowControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flow control status." ::= { hwifXXEntry 7 } hwifSrcMacControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether to filter by source MAC address." ::= { hwifXXEntry 8 } hwifClearStat OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all port statistics. Read operation not supported." ::= { hwifXXEntry 9 } hwifXXBasePortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of the port and the first port index of the device is 1." ::= { hwifXXEntry 10 } hwifXXDevPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Device index of the port." ::= { hwifXXEntry 11 } hwifPpsMcastControl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product." ::= { hwifXXEntry 12 } hwifPpsBcastDisValControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast." ::= { hwifXXEntry 13 } hwifUniSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The step of unicast suppression in ratio mode." ::= { hwifXXEntry 14 } hwifPpsUniSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max pps(packet per second) value of unicast suppression in pps mode." ::= { hwifXXEntry 15 } hwifMulSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The step of multicast suppression in ratio mode." ::= { hwifXXEntry 16 } hwifPpsMulSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max pps(packet per second) value of multicast suppression in pps mode." ::= { hwifXXEntry 17 } hwifUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The unicast suppression with the ranging from 1 to 100 percent in ratio mode. The step is determined by hwifUniSuppressionStep." ::= { hwifXXEntry 18 } hwifPpsUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The unicast suppression in pps(packet per second) mode. The max value is determined by hwifPpsUniSuppressionMax." ::= { hwifXXEntry 19 } hwifMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast suppression with ranging from 1 to 100 percent in ratio mode. The step is determined by hwifMulSuppressionStep." ::= { hwifXXEntry 20 } hwifPpsMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast suppression in pps(packet per second) mode. The max pps value is determined by hwifPpsMulSuppressionMax." ::= { hwifXXEntry 21 } hwifComboActivePort OBJECT-TYPE SYNTAX INTEGER { fiber (1), -- Optical port copper (2), -- Electrical port na (3) -- Not applicable } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Active port on combo interface." ::= { hwifXXEntry 22 } hwifBMbpsMulSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured." ::= { hwifXXEntry 23 } hwifBMbpsMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hwifBMbpsMulSuppressionMax in the entry. The default value of hwifBMbpsMulSuppression is the value of hwifBMbpsMulSuppressionMax." ::= { hwifXXEntry 24 } hwifBKbpsMulSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured." ::= { hwifXXEntry 25 } hwifBKbpsMulSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The step of multicast suppression with bandwidth-based(Kbps)." ::= { hwifXXEntry 26 } hwifBKbpsMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hwifBKbpsMulSuppressionMax in the entry. The value of hwifBKbpsMulSuppression must be multiple of the value of hwifBKbpsMulSuppressionStep. The default value of hwifBKbpsMulSuppression is the value of hwifBKbpsMulSuppressionMax." ::= { hwifXXEntry 27 } hwifUnknownPacketDropMul OBJECT-TYPE SYNTAX DropDirection MAX-ACCESS read-write STATUS current DESCRIPTION "Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions." DEFVAL { disable } ::= { hwifXXEntry 28 } hwifUnknownPacketDropUni OBJECT-TYPE SYNTAX DropDirection MAX-ACCESS read-write STATUS current DESCRIPTION "Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions." DEFVAL { disable } ::= { hwifXXEntry 29 } hwifBMbpsUniSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured." ::= { hwifXXEntry 30 } hwifBMbpsUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hwifBMbpsUniSuppressionMax in the entry. The default value of hwifBMbpsUniSuppression is the value of hwifBMbpsUniSuppressionMax." ::= { hwifXXEntry 31 } hwifBKbpsUniSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured." ::= { hwifXXEntry 32 } hwifBKbpsUniSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The step of unicast suppression with bandwidth-based(Kbps)." ::= { hwifXXEntry 33 } hwifBKbpsUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hwifBKbpsUniSuppressionMax in the entry. The value of hwifBKbpsUniSuppression must be multiple of the value of hwifBKbpsUniSuppressionStep. The default value of hwifBKbpsUniSuppression is the value of hwifBKbpsUniSuppressionMax." ::= { hwifXXEntry 34 } hwifOutPayloadOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The actual output octets of the interface." ::= { hwifXXEntry 35 } hwifInPayloadOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The actual input octets of the interface." ::= { hwifXXEntry 36 } hwifInErrorPktsRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The rate of inbound error packets on the interface." ::= { hwifXXEntry 37 } hwifInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received on the interface." ::= { hwifXXEntry 38 } hwifInNormalPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of normal packets received on the interface." ::= { hwifXXEntry 39 } hwifOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets sent on the interface." ::= { hwifXXEntry 40 } hwifAggregateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port aggregation information table." ::= { hwLswExtInterface 2 } hwifAggregateEntry OBJECT-TYPE SYNTAX HwIfAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port aggregation information table." INDEX { hwifAggregatePortIndex } ::= { hwifAggregateTable 1} HwIfAggregateEntry ::= SEQUENCE { hwifAggregatePortIndex InterfaceIndex, hwifAggregatePortName OCTET STRING, hwifAggregatePortListPorts PortList, hwifAggregateModel INTEGER, hwifAggregateOperStatus RowStatus } hwifAggregatePortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of the main aggregated port." ::= { hwifAggregateEntry 1 } hwifAggregatePortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregation group name." ::= { hwifAggregateEntry 2 } hwifAggregatePortListPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Portlist of a aggregating." ::= { hwifAggregateEntry 3 } hwifAggregateModel OBJECT-TYPE SYNTAX INTEGER { ingress (1), both (2), round-robin (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Load sharing mode for the port aggregation." ::= { hwifAggregateEntry 4 } hwifAggregateOperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row." ::= { hwifAggregateEntry 5 } -- ================================================================== hwifHybridPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwifHybridPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Hybrid-port configuration table." ::= { hwLswExtInterface 3 } hwifHybridPortEntry OBJECT-TYPE SYNTAX HwifHybridPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Hybrid-port configuration table." INDEX { hwifHybridPortIndex } ::= { hwifHybridPortTable 1} HwifHybridPortEntry ::= SEQUENCE { hwifHybridPortIndex INTEGER, hwifHybridTaggedVlanListLow OCTET STRING, hwifHybridTaggedVlanListHigh OCTET STRING, hwifHybridUnTaggedVlanListLow OCTET STRING, hwifHybridUnTaggedVlanListHigh OCTET STRING } hwifHybridPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of Hybrid-port." ::= { hwifHybridPortEntry 1 } hwifHybridTaggedVlanListLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'." ::= { hwifHybridPortEntry 2 } hwifHybridTaggedVlanListHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'." ::= { hwifHybridPortEntry 3 } hwifHybridUnTaggedVlanListLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { hwifHybridPortEntry 4 } hwifHybridUnTaggedVlanListHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { hwifHybridPortEntry 5 } -- ==================== Combo port table ============================ hwifComboPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwifComboPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Combo-port table." ::= { hwLswExtInterface 4 } hwifComboPortEntry OBJECT-TYPE SYNTAX HwifComboPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwifComboPortTable." INDEX { hwifComboPortIndex } ::= { hwifComboPortTable 1} HwifComboPortEntry ::= SEQUENCE { hwifComboPortIndex InterfaceIndex, hwifComboPortCurActive INTEGER } hwifComboPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces." ::= { hwifComboPortEntry 1 } hwifComboPortCurActive OBJECT-TYPE SYNTAX INTEGER { fiber (1), -- Optical port copper (2), -- Electrical port na (3) -- Not applicable } MAX-ACCESS read-write STATUS current DESCRIPTION "Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported." ::= { hwifComboPortEntry 2 } -- ========================l2======================================== hwLswL2InfMibObject OBJECT IDENTIFIER ::= { hwLswL2InfMib 1 } hwSlotPortMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Max ports of the slots." ::= { hwLswL2InfMibObject 1 } hwSwitchPortMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Max ports that this switch includes." ::= { hwLswL2InfMibObject 2 } hwifVLANTrunkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfVLANTrunkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gvrp attributes on the VlanTrunk port." ::= { hwLswL2InfMibObject 3 } hwifVLANTrunkStatusEntry OBJECT-TYPE SYNTAX HwIfVLANTrunkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gvrp attributes on the VlanTrunk port." INDEX { hwifVLANTrunkIndex } ::= { hwifVLANTrunkStatusTable 1} HwIfVLANTrunkStatusEntry ::= SEQUENCE { hwifVLANTrunkIndex InterfaceIndex, hwifVLANTrunkGvrpRegistration INTEGER, hwifVLANTrunkPassListLow OCTET STRING, hwifVLANTrunkPassListHigh OCTET STRING, hwifVLANTrunkAllowListLow OCTET STRING, hwifVLANTrunkAllowListHigh OCTET STRING } hwifVLANTrunkIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of the VLANTrunk interface." ::= { hwifVLANTrunkStatusEntry 1 } hwifVLANTrunkGvrpRegistration OBJECT-TYPE SYNTAX INTEGER { normal (1), fixed (2), forbidden (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port." ::= { hwifVLANTrunkStatusEntry 2 } hwifVLANTrunkPassListLow OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'." ::= { hwifVLANTrunkStatusEntry 4 } hwifVLANTrunkPassListHigh OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'." ::= { hwifVLANTrunkStatusEntry 5 } hwifVLANTrunkAllowListLow OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'." ::= { hwifVLANTrunkStatusEntry 6 } hwifVLANTrunkAllowListHigh OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'." ::= { hwifVLANTrunkStatusEntry 7 } hwethernetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet port attribute table." ::= { hwLswL2InfMibObject 4 } hwethernetEntry OBJECT-TYPE SYNTAX HwEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of Ethernet port attribute table" AUGMENTS { ifEntry } ::= { hwethernetTable 1} HwEthernetEntry ::= SEQUENCE { hwifEthernetDuplex INTEGER, hwifEthernetMTU INTEGER, hwifEthernetSpeed INTEGER, hwifEthernetMdi INTEGER, hwMaxMacLearn INTEGER, hwifMacAddressLearn INTEGER, hwifEthernetTest INTEGER, hwifMacAddrLearnMode INTEGER, hwifEthernetFlowInterval INTEGER, hwifEthernetIsolate OCTET STRING, hwifVlanVPNStatus INTEGER, hwifVlanVPNUplinkStatus INTEGER, hwifVlanVPNTPID Integer32, hwifIsolateGroupID Integer32, hwifisUplinkPort INTEGER, hwifEthernetAutoSpeedMask SpeedModeFlag, hwifEthernetAutoSpeed SpeedModeFlag } hwifEthernetDuplex OBJECT-TYPE SYNTAX INTEGER { full (1), half (2), auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet interface mode." ::= { hwethernetEntry 3 } hwifEthernetMTU OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "MTU on the Ethernet interface." ::= { hwethernetEntry 4 } hwifEthernetSpeed OBJECT-TYPE SYNTAX INTEGER { auto (0), s10M (10), s100M (100), s1000M (1000), s10000M (10000), s24000M (24000), s40000M (40000), s100000M (100000) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet interface speed." ::= { hwethernetEntry 5 } hwifEthernetMdi OBJECT-TYPE SYNTAX INTEGER { mdi-ii (1), mdi-x (2), mdi-auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3" ::= { hwethernetEntry 7 } hwMaxMacLearn OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited." ::= { hwethernetEntry 8 } hwifMacAddressLearn OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set." ::= { hwethernetEntry 9 } hwifEthernetTest OBJECT-TYPE SYNTAX INTEGER { test(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test this interface. The actual testing will be different according to products. Read operation not supported." ::= { hwethernetEntry 10 } hwifMacAddrLearnMode OBJECT-TYPE SYNTAX INTEGER { iVL(1), sVL(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning." ::= { hwethernetEntry 11 } hwifEthernetFlowInterval OBJECT-TYPE SYNTAX INTEGER (5..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5." ::= { hwethernetEntry 12 } hwifEthernetIsolate OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6." ::= { hwethernetEntry 13 } hwifVlanVPNStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan VPN enable status." ::= { hwethernetEntry 14 } hwifVlanVPNUplinkStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan VPN uplink status." ::= { hwethernetEntry 15 } hwifVlanVPNTPID OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information." ::= { hwethernetEntry 16 } hwifIsolateGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Isolate group identifier. Value zero means this interface does not belong to any isolate group." ::= { hwethernetEntry 17 } hwifisUplinkPort OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet uplink status, default value is 2." ::= { hwethernetEntry 18 } hwifEthernetAutoSpeedMask OBJECT-TYPE SYNTAX SpeedModeFlag MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0." ::= { hwethernetEntry 19 } hwifEthernetAutoSpeed OBJECT-TYPE SYNTAX SpeedModeFlag MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hwifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hwifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hwifEthernetAutoSpeedMask." ::= { hwethernetEntry 20 } hwIsolateGroupMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max isolate group that this device support, the value is zero means that the device does not support isolate group." ::= { hwLswL2InfMibObject 5 } hwGlobalBroadcastMaxPps OBJECT-TYPE SYNTAX INTEGER (0..14881000) MAX-ACCESS read-write STATUS current DESCRIPTION "The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting." ::= { hwLswL2InfMibObject 6 } hwGlobalBroadcastMaxRatio OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting." ::= { hwLswL2InfMibObject 7 } hwBpduTunnelStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bpdu tunnel enable status." ::= { hwLswL2InfMibObject 8 } hwVlanVPNTPIDMode OBJECT-TYPE SYNTAX INTEGER { port-based(1), global(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hwVlanVPNTPID. In this situation, hwifVlanVPNTPID in hwethernetTable has the same value with hwVlanVPNTPID." ::= { hwLswL2InfMibObject 9 } hwVlanVPNTPID OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100." ::= { hwLswL2InfMibObject 10 } hwPortIsolateGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortIsolateGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Isolate Group attribute table." ::= { hwLswL2InfMibObject 11 } hwPortIsolateGroupEntry OBJECT-TYPE SYNTAX HwPortIsolateGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwPortIsolateGroupTable." INDEX { hwPortIsolateGroupIndex } ::= { hwPortIsolateGroupTable 1 } HwPortIsolateGroupEntry ::= SEQUENCE { hwPortIsolateGroupIndex Integer32, hwPortIsolateUplinkIfIndex InterfaceIndex, hwPortIsolateGroupRowStatus RowStatus, hwPortIsolateGroupDescription DisplayString } hwPortIsolateGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port isolate group identifier. The index of the hwPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity." ::= { hwPortIsolateGroupEntry 1 } hwPortIsolateUplinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Index number of the uplink interface." ::= { hwPortIsolateGroupEntry 2 } hwPortIsolateGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row." ::= { hwPortIsolateGroupEntry 3 } hwPortIsolateGroupDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "Port isolate group description, default value is zero-length string." ::= { hwPortIsolateGroupEntry 4 } hwMaxMacLearnRange OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of MAC address that the port supports." ::= { hwLswL2InfMibObject 12 } END