-- ***************************************************************** -- QTECH-VLAN-MIB.mib: Qtech VLAN MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by Qtech Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- QTECH-VLAN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI VlanId, PortList FROM Q-BRIDGE-MIB DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ConfigStatus, MemberMap, IfIndex FROM QTECH-TC qtechMgmt FROM QTECH-SMI; qtechVlanMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "Qtech Networks Co.,Ltd." CONTACT-INFO " Tel: 4008-111-000 E-mail: service@qtech.com.cn" DESCRIPTION "This module defines qtech vlan mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { qtechMgmt 9} qtechVlanMIBObjects OBJECT IDENTIFIER ::= { qtechVlanMIB 1 } VlanList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that vlan is included in the set of vlans; the vlan is not included if its bit has a value of '0'." SYNTAX OCTET STRING qtechVlanMaxNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MAX vlans this system supported." ::= { qtechVlanMIBObjects 1 } qtechVlanCurrentNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current vlans this system have." ::= { qtechVlanMIBObjects 2 } qtechSystemMaxVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max vlans of VID this system supported." ::= { qtechVlanMIBObjects 3 } -- qtechVlanIfConfigTable from the 10.3(4b3) has been abandoned. qtechVlanIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechVlanIfConfigEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vlan table." ::= { qtechVlanMIBObjects 4 } qtechVlanIfConfigEntry OBJECT-TYPE SYNTAX QtechVlanIfConfigEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "list of vlan and it's port group table." INDEX { qtechVlanIfConfigIfIndex} ::= { qtechVlanIfConfigTable 1 } QtechVlanIfConfigEntry ::= SEQUENCE { qtechVlanIfConfigIfIndex IfIndex, qtechVlanIfAccessVlan VlanId, qtechVlanIfNativeVlan VlanId, qtechVlanIfAllowedVlanList OCTET STRING } qtechVlanIfConfigIfIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION " " ::= { qtechVlanIfConfigEntry 1 } qtechVlanIfAccessVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value indicate the VID of the vlan which that this port belong to. This field is effective for only access port." ::= { qtechVlanIfConfigEntry 2 } qtechVlanIfNativeVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value indicate the VID of the native vlan of that this port . This field is effective for only trunk port." ::= { qtechVlanIfConfigEntry 3 } qtechVlanIfAllowedVlanList OBJECT-TYPE SYNTAX OCTET STRING(SIZE(512)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Each bit in every octet in octet string assigned to a vlan, the value of the bit indicates that if the vlan is belong to allowed vlan list of this interface. It indicates that assigned vlan is member of allowed vlan list of this interface if value of the bit is 1. The lowest bit of first byte correspond to vlan 1 and the lowest bit of second byte correspond to vlan 9 vlan. This field is effective for only trunk port." ::= { qtechVlanIfConfigEntry 4 } -- qtechVlanTable from the 10.3(4b3) has been abandoned. qtechVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechVlanEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vlan table." ::= { qtechVlanMIBObjects 5 } qtechVlanEntry OBJECT-TYPE SYNTAX QtechVlanEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "list of vlan and it's distribution table." INDEX { qtechVlanVID } ::= { qtechVlanTable 1 } QtechVlanEntry ::= SEQUENCE { qtechVlanVID VlanId, qtechVlanPortMemberAction MemberMap, qtechVlanApMemberAction MemberMap, qtechVlanAlias DisplayString, qtechVlanEntryStatus ConfigStatus } qtechVlanVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "VID of vlan ." ::= { qtechVlanEntry 1 } qtechVlanPortMemberAction OBJECT-TYPE SYNTAX MemberMap MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Each octet in member map assigned to a physical port, the value of the octect indicates the action of a physical port in the vlan. Drop(1) indicate that the vlan doesn't include this physical port, Add(2) indicate that the vlan include this physical port." ::= { qtechVlanEntry 2 } qtechVlanApMemberAction OBJECT-TYPE SYNTAX MemberMap MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Each octet in member map assigned to a aggreate port, the value of the octect indicates the action of a aggreate port in the vlan. Drop(1) indicate that the vlan doesn't include this physical port, Add(2) indicate that the vlan include this physical port." ::= { qtechVlanEntry 3 } qtechVlanAlias OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Vlan's alias ." DEFVAL{""} ::= { qtechVlanEntry 4 } qtechVlanEntryStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Status of this entry, set this object to valid will creat a vlan of this entry, and set its value to invalid will delete the vlan of this entry." ::= { qtechVlanEntry 5 } -- qtechVlanPortConfigTable from the 10.3(4b3) was started to support. --The table of VLAN members qtechVlanPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechVlanPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VLAN members." ::= { qtechVlanMIBObjects 6 } qtechVlanPortConfigEntry OBJECT-TYPE SYNTAX QtechVlanPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of ports." INDEX { qtechVlanPortConfigIndex} ::= { qtechVlanPortConfigTable 1 } QtechVlanPortConfigEntry ::= SEQUENCE { qtechVlanPortConfigIndex IfIndex, qtechVlanPortConfigMode INTEGER, qtechVlanPortAccessVlan VlanId, qtechVlanPortNativeVlan VlanId, qtechVlanPortAllowedVlanList VlanList, qtechIfVlanID Integer32 } --the index of port qtechVlanPortConfigIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "port index" ::= { qtechVlanPortConfigEntry 1 } --The port mode, read-only, in QTECH-INTERFACE-MIB.mib can be set up. qtechVlanPortConfigMode OBJECT-TYPE SYNTAX INTEGER { access(1), -- the mode of interface is access port trunk(2), -- the mode of interface is trunk port dot1q-tunnel(3), -- the mode of interface is 802.1q tunnel port hybrid(4), -- the mode of interface is hybrid port other(5), -- the mode of interface is unknow port uplink(6), -- the mode of interface is uplink port host(7), -- the mode of interface is private host port promiscuous(8) -- the mode of interface is private promiscuous port } MAX-ACCESS read-only STATUS current DESCRIPTION "Port mode, indicates that port is an access(1), trunk(2), dot1q-tunnel(3), hybrid(4), other(5), uplink(6), host(7) or promiscuous(8) port." ::= { qtechVlanPortConfigEntry 2 } qtechVlanPortAccessVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The value indicate the VID of the vlan which that this port belong to. This field is effective for only access port." ::= { qtechVlanPortConfigEntry 3 } qtechVlanPortNativeVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The value indicate the VID of the native vlan of that this port . This field is effective for only trunk,hybrid,uplink and dot1q_tunnel port." ::= { qtechVlanPortConfigEntry 4 } qtechVlanPortAllowedVlanList OBJECT-TYPE SYNTAX VlanList MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 0 through 7, the second octet specifying vlans 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that vlan is included in the set of vlans; the vlan is not included if its bit has a value of '0'" ::= { qtechVlanPortConfigEntry 5 } qtechIfVlanID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value indicates the VID of the vlan which that this port belong to or of the native vlan of this port. This field is effective for only access, trunk, hybrid, uplink and dot1q_tunnel port." ::= { qtechVlanPortConfigEntry 6 } -- qtechVlanConfigTable from the 10.3(4b3) was started to support. qtechVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF QtechVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vlan table." ::= { qtechVlanMIBObjects 7 } qtechVlanConfigEntry OBJECT-TYPE SYNTAX QtechVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of vlan and it's distribution table." INDEX { qtechVlanConfigVID } ::= { qtechVlanConfigTable 1 } QtechVlanConfigEntry ::= SEQUENCE { qtechVlanConfigVID VlanId, qtechVlanConfigAction Integer32, qtechVlanConfigName DisplayString, qtechVlanConfigPortMember PortList } qtechVlanConfigVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "VID of vlan ." ::= { qtechVlanConfigEntry 1 } qtechVlanConfigAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value 1 to create a vlan, 0 to delete a vlan." ::= { qtechVlanConfigEntry 2 } qtechVlanConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "vlan name." ::= { qtechVlanConfigEntry 3 } qtechVlanConfigPortMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { qtechVlanConfigEntry 4 } qtechVlanMIBConformance OBJECT IDENTIFIER ::= { qtechVlanMIB 2 } qtechVlanMIBCompliances OBJECT IDENTIFIER ::= { qtechVlanMIBConformance 1 } qtechVlanMIBGroups OBJECT IDENTIFIER ::= { qtechVlanMIBConformance 2 } -- compliance statements qtechVlanMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Qtech Vlan MIB" MODULE -- this module MANDATORY-GROUPS { qtechVlanMIBGroup } ::= { qtechVlanMIBCompliances 1 } -- units of conformance qtechVlanMIBGroup OBJECT-GROUP OBJECTS { qtechVlanMaxNumber, qtechVlanCurrentNumber, qtechSystemMaxVID, -- qtechVlanIfConfigIfIndex, qtechVlanIfAccessVlan, qtechVlanIfNativeVlan, qtechVlanIfAllowedVlanList, qtechVlanVID, qtechVlanApMemberAction, qtechVlanPortMemberAction, qtechVlanAlias, qtechVlanEntryStatus, -- qtechManageVlanVID, -- qtechPortDefaultVIDPortIndex, -- qtechPortDefaultVID, -- qtechVlanPortConfigIndex, qtechVlanPortConfigMode, qtechVlanPortAccessVlan, qtechVlanPortNativeVlan, qtechVlanPortAllowedVlanList, qtechIfVlanID, qtechVlanConfigVID, qtechVlanConfigAction, qtechVlanConfigName, qtechVlanConfigPortMember } STATUS current DESCRIPTION "A collection of objects providing vlan configure ." ::= { qtechVlanMIBGroups 1 } END